Featuring a complex transformation, essentially the front and back ends of the truck fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his pricepoint has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, held in place by a simple clip.) Optimus' final Automorph, located in his torso, is activated by flipping the silver lever on his stomach activating a series of spring-loaded actions where the truck windows are pushed apart, and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
The "Breakout Battle" set includes another take on a screen-accurate "Scrapyard Optimus Prime", featuring a brown paint wash on tan plastic. The set was a shared exclusive between Toys "R" Us, online retailers such as Big Bad Toy Store, and Myer in Australia. The set was released in Australia, Singapore, and Canada but never actually made it to retail in the U.S. The set also includes Rollbar and a Vehicon.
Part of 9th wave of One-Step Changers, and the first of the Combiner Force subline, this Optimus Prime is yet another new mold, with a different transformation scheme (a similar engineering to Age of Extinction's Bumblebee) consisting of pulling the switch on the back (do not hold the truck kibble when you transform him). Like most One-Step Changers, Optimus Prime features limited articulation on the shoulders, and features 5mm compatible hands.
In 1986 the Transformers animated movie had been released, and during the run of the movie, through a pamphlet that came with certain figures, you could order certain Transformers through the mail, such as Optimus Prime among other toys. The toys came in a standard brown mailer box, with items, booklet, and a limited Edition Movie certificate and sticker.

Optimus Prime is the leader of the main group of Autobots in the iteration of the Transformers franchise primarily marked by the 2010 computer animated series Transformers: Prime on The Hub.[16] Optimus Prime was created as the last of the Thirteen Primes, the first generation of Transformers, each created directly by Primus as a band of unique warriors to combat and defeat Unicron. Upon his creation, Optimus united the Thirteen by his greeting All are one. While all of the other members of the Thirteen each possessed unique abilities and artifacts, Optimus wielded no special powers or weapons. It was only through his vision and courage that allowed the Thirteen to finally defeat Unicron. Reborn through the Well of All Sparks, Orion Pax became Optimus Prime, a veteran military commander and second in command who wields an ion blaster and a double bladed energon axe. He became the leader of the Autobots after Sentinel Zeta Prime fell in battle, but is not certain he wants the responsibility.


Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.

Optimus and Prowl received message from Skyfire of a coal transport in Africa, and discovered Megatron was using human slaves. Megatron detonated his coal mines with the world's largest explosion, killing the humans and forging the world's largest diamond — that he would use to as a lens for a satellite to focus the Sun's beams, melting the Rocky Mountains! Prime ordered Skyfire to attack the satellite, and Ratchet to build a square mile panel of metal to deflect the beam, blowing the satellite up. Satellite of Doom The Decepticons attempted to drain the Prudhoe Bay oil reservoir, causing volcanic eruptions and Russia to approach America, accelerating tensions between the countries. Optimus ordered razon gas to be pumped into the reservoir, returning the oil below and raising the Decepticons' aquatic drill. When Continents Collide


China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More

In some continuities, though, it’s our lovable pal Bee who takes the leadership reigns. In the animated series Transformers: Robots in Disguise, with Optimus having died at the end of the previous series, Bumblebee starts off as the Autobot leader, but he’s apprehensive about it. And he even takes the leadership mantle in the live-action film series; taking over for Optimus, who leaves the Autobots behind to head into space to search for the Seed at the end of the last movie, Age of Extinction.


When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
If all four Autobots ventured together into the Decepticons’ lab, they first encountered Laserbeak, only to quickly dispatch him. Venturing further into the lab, the group soon spotted the antidote they were after, and sent Mirage to fetch it. Mirage returned with the beaker and news; he had heard Ramjet and Starscream talking about using a new poison to turn humans into mindless slaves.
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
The BK tie in toy of Optimus Prime is essentially two toys in one. The first part of the toy consists of two truck halves, which snap together around a sculpted robot mode Optimus Prime. The truck is squat, and primarily blue, with outbursts of chalk gray paint and red flames. Pulling back and letting go activates the gimmick: Prime "drives" forward and bursts from the truck mode, "transformed" to robot mode. This gimmick has marginal success.
The Autobots continued to guard humanity in secret for many years, until one day in the 21st century when Ratchet was captured by a human group known as Skylogic Systems. Upon investigating the organization, Optimus Prime and Bumblebee came into contact with the Lone Gunmen, three humans who were also on Skylogic's tail for their role in creating a dangerous virus. Learning from them that Ratchet's DNA was part of the concoction, the Autobots joined forces with the humans and helped track down David Simmons, the man responsible for releasing the virus. One interrogation later and they had the address to the Skylogic base, though Prime's size prevented him from easily infiltrating the building, so he left the rescue mission up to Bumblebee and the Gunmen. Once Ratchet was saved, the Autobots parted company with their new human friends in an attempt to lure away any Skylogic pursuers. The X-Files: Conspiracy: The Transformers
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
Although he was weak and low on energon, Prime made a last-ditch effort to save the day when he rammed through the wall of Megatron's energon-producing lab. G.I. Joe vs. the Transformers #5 After a quick recharge, Optimus single-handedly smashed the Decepticons, pounded Megatron to the ground, and ripped his fusion cannon off his arm. Prime then teamed up with the Joes and used Megatron's cannon to shoot down the SPS Satellite that had gone rogue and was destroying the island.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
The values started becoming inconsistent and skewed in Generation 2 and Beast Wars, when Hasbro apparently thought no child will ever want a toy that is described as anything less than perfect. Thus it became rarer and rarer to see any low numbers. Most characters' numbers hardly ever dipped below 8, the Go-Bot version of Optimus Prime was the first character to have all values at 10, a trend that would repeat for most "leader" characters. When even more powerful versions of the Optimus Primal toy (such as Optimal Optimus) were introduced, Hasbro even invented a "10+" rating in an attempt to keep increasing the power levels. With the Transformers: Cybertron line a few characters even got "Unknown" and "Infinity" ratings.
Somewhere along the line, G.I. Joe picked up the familiar storyline that we all best associate with the toys: G.I. Joe Team vs. the Evil Cobra Organization. A classic tale of good vs. evil. Well guess what. Somewhere else along the line the franchise picked up a very different storyline and a new look to boot, highlighted by the newest figurine: The DARK NINJA MASTER.
Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colours of the actual series, and a metallic-paint version (pictured), which is less show-accurate but more shiny. The plain-colours version was the first release and has an Autobot symbol tampograph on his shoulder as per the cartoon, while the later metallic-finish version instead came with a decal sheet.
A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.

When Bumblebee, Hound and Spike brought a badly-damaged Starscream back to the Ark, Optimus struggled with the ethical implications of allowing Wheeljack and Ratchet to mess with the Decepticon's logic circuits, but gave them the go ahead. Starscream proved to be amnesic, and Optimus was able to take the opportunity to help him as much as possible, even physically preventing Megatron from retrieving his former lieutenant when Starscream opted to stay with the Autobots. Though Starscream left as soon as he regained his memory, Prime reflected that they'd learned that maybe it was possible to reason with a Decepticon. Redemption Center
Another thing different now from when I was a kid (70s/80s) is that the sets contain much fewer basic bricks. It seems the models are made out of all these exotic specialized pieces which are less useful for general building. Is this a business strategy to sell more sets by reducing the reusability, a marketing ploy to sell more pieces by making every set include unique collectable parts, or just trying to make the models look more realistic/slick? I think Lego was more fun when the majority of bricks were basic.
Optimus Prime landed in the Himalayan Mountains with G.I. Joes Flint and Hawk. As they searched the area, the trio was attacked by Bludgeon in his Pretender shell. Prime whacked him with his energon-axe and in return Bludgeon bearhugged him and coated him in metal-eating slime. Hawk, still carrying power from the Matrix, helped Prime break free. Optimus then shot his way into the hidden kingdom of Cobra-La.
Mega Optimus Prime is a new larger-sized mold with the similar transformation scheme from the 3-Step Changer toy. It transforms from truck to robot in just 3 easy steps! His deco is based on his appearance in the season finale "Battlegrounds". He also obtains additional articulation on the arms, and sports connector ports for any Robots in Disguise (2015) Mini-Con figures.
This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.

Optimus Prime appears in the prequel novel Transformers: Ghosts of Yesterday, where he and a group of Autobots travel in the Ark searching for the Allspark, battling Starscream's Decepticons along the way. While going through a worm hole, the Autobots find themselves encountering a group of humans in a spacecraft reverse-engineered from studying Megatron. With this discovery, Prime realizes the significance of Earth, as both Megatron and the Allspark are there. After saving Bumblebee from a pit of rock-chewing cave worms, Prime battles Starscream. He is about to be gunned down by Starscream and Bonecrusher when he is saved by the human craft. In retaliation, Starscream obliterates it.
While they wandered through the tunnels, the Joes and Prime found cave paintings that described the last visit to Earth by the planet-eating god Unicron. They were attacked again by Bludgeon and Cobra-La minions, but were led away by a ragged Joe Colton, prisoner of Cobra-La for the last 25 years. Black Horizon, Part 1 of 2 Bludgeon managed to find them again and during a second battle Prime tore open the Pretender's shell, revealing Bludgeon's robot form inside. Bludgeon tripped and dangled dangerously over a chasm, but rather than let Optimus Prime save him, Bludgeon forced Prime to drop him to his death laughing all the way down.

A giant-sized transforming Optimus Prime figure is set to be released for the third film. The set comes with a Leader Class-sized Optimus Prime figure and a trailer that transforms into his Omega Combat Armor - both of which combine to form Prime's Ultimate mode.[126] This set will be released on August 1st, 2011, a month after the film's premiere.
A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.
The protoform mode consists of eight pieces of metallic blue plastic that plug into the arms, chest, pelvis and legs of the figure. With these pieces attached, the figure can be manipulated in a manner that might charitably be called "transformation" into his meteor-like "entry mode," accomplished by doing little more than tucking the head out of sight and folding the chest back. This blue-and-grey lump can be mounted on a three-piece stand that comes with the figure, allowing you to display it in mid-plummet. Optimus Prime's Earth mode, meanwhile, is made up of many armor pieces (including a particularly large backpack) that form a rather kibbly robot mode, which can then transform into a truck approximating a Peterbilt 379. We would go into what an abominable, unintuitive, parts-massaging mess this transformation is, but we wouldn't want to fill up the rest of the page.
The seldom seen 5th season re-airing of the show featured the G1 episodes retold by a stop-motion Powermaster Optimus Prime to the live-action youngster Tommy Kennedy. Although no back story was ever provided for how Prime became a Powermaster, the new sequences are said to take place after the four previous seasons. This indicates that Prime became a Powermaster in the original Sunbow continuity.
Also, as a new feature, most figures include advanced "automorph technology", which is designed to create quicker and easier conversion, which means moving one part of the vehicle or robot causes other parts to move, creating a final shift to battle mode; this was successful because the transformation was more complex in the movie line than in any other Transformers toy line.
Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
In the first nexus, when Swoop reported back to Autobot HQ that the other Dinobots were being controlled by Bombshell's cerebro-shells, Optimus had to decide whether to stop them with an immediate full-scale assault, or consult the Ark's computer. If he led an immediate attack, the cerebro-shells were jolted loose when his troops carried out his order to, "Bring them down fast and hard". If he consulted the computer, he then had to choose between its plan to have Windcharger remove the shells from a distance with his magnetic powers, or go with Mirage's idea to lure the Dinobots over Bandit's Bluff with an Optimus Prime hologram. If he chose Mirage's plan, the Dinobots charged over the cliff and into the ocean, where they were salvaged for repairs back at base. If he let Windcharger lead operations at the bluff so he could confer with Skids about some strange activity near Dolphin's Bay, it was out of his hands whether Windcharger accidentally tore the Dinobots to bits, or harmlessly removed the cerebro-shells. The latter outcome led to Grimlock telling Optimus that Bombshell said controlling them was just part of a larger plan, and the Autobot leader realized that it might tie in to Skids's report. Skids and Bumblebee could investigate in Wheeljack's new mini-sub, but should he send Sludge along with them?
The instructions neglect to mention that the entire roof of the cab is on a concealed hinge which greatly eases the difficulty of Prime's transformation. For whatever reason, the instructions treat the toy as if the hinge does not exist, going so far as to show Prime's head magically clipping through his chest to transform. The instructions also neglect to mention that his heel/bumper pieces must be slid out until they click, making the figure just that bit more stable, and that the rotating truck door panels on his upper arms can be pulled further out (but not off) from their sockets, allowing more space for the panels to swing around his hood-arms during transformation.
Transformers Siege Greenlight will be released sooner than later, especially compared to exclusives from previous years. We have our first preorder up on Amazon.ca revealing two important points: who the exclusive retailer is and what the price point will be. Now we know that it will be an Amazon exclusive. While we only know for sure that this will be the case in Canada, it stands to reason that it will be an Amazon exclusive elsewhere to, which is great news since those are always the - Read More
The largest 2007 Transformers movie Optimus Prime toy, Leader Class Optimus Prime featured, at the time, the most accurate representation of the CGI designs' complex transformation sequence. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel hitch is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
In just seven years, from 1997 to 2004, the number of elements in the company’s inventory exploded, ascending from slightly more than 6,000 to more than 14,200. So did its range of colors, which climbed from the original six (red, yellow, blue, green, black, and white) to more than fifty. As the number of components and colors mounted, soaring supply and production costs plundered the company’s bottom line. Here’s why.
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron.
Based on Optimus Prime's Cybertronian form as seen in the Dreamwave comic book "The War Within", this version of Prime transforms into Cybertronian truck. The figure was personally designed by comic artist Don Figueroa, who created the original comic design in the first place, and his signature is left on the figure in the most literal way: the word "DON" can be seen sculpted into the barrel of his silver ion blaster.
Alternity Convoy was simultaneously available in both this silver coloration, and a deco based on his traditional appearance termed "Vibrant Red" (see below). The figure was later redecoed to create "Convoy Super Black" (representing not Optimus Prime, but Universe Nemesis Prime), Alternity Ultra Magnus, and Alternity Dai Atlas. It was retooled into Transformers GT GT-R Prime, GT-R Saber, GT-R Megatron and GT-R Maximus.
This Optimus Prime is a redeco of the figure above, featuring red wheels and various Tech Spec-sque patterns on the legs & chest which can be decoded with their transparent red weapons, which is molded in a sprue similar to the ones used for the Arms Microns kits & Robots in Disguise (2015) Mini-Con figures. He can use any weapons included in this set, although his primary weapon is an axe.
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.

The success of Beast Wars and the change in storyline resulted in its second phase: Beast Machines. Like Beast Wars, the name Transformers was used only as a secondary title. While still a success, the storyline and direction borne by Beast Machines was questioned and criticized by the most ardent fans who knew the previous history of the Transformers. Also, there was a clamor for a return to the original idea of the Transformers, that of their being protean robots with nearly humanlike artificial intelligences who transformed into vehicles or devices.
The third version [18] would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and Triple Changer. The Headmaster also would have been a Triple Changer, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.
Activision and Traveller's Tales, creators of the Lego Star Wars games, released Transformers: The Game in 2007, accompanied by Transformers Autobots and Transformers Decepticons, to tie in with the live-action feature film for the Sony PlayStation 3, Microsoft Xbox 360, Nintendo Wii, Nintendo DS, PC, Sony PlayStation Portable, and PlayStation 2. The player was able to play as both the Autobots and the Decepticons, pick up and throw objects, and transform at any time. The steering in vehicle mode was compared to that of the Grand Theft Auto games and had a free-roaming environment.
This figure is an exclusive to San Diego Comic-Con 2011. The toy comes in a packaging shaped like the Matrix of Leadership, which one could wear around their neck, preferably at the convention itself, so passers-by can exclaim "WHERE THE HELL DID YOU GET THAT?" and then try to get one themselves. The Matrix itself comes packaged in a box that is designed to look like Optimus Prime's chest, and opens accordingly. The chest window doors are sealed with a round magnet.

Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.

Early in this new series of encounters with Megatron, Red Alert contacted the Autobots on Earth and asked for Optimus Prime to join then on Velocitron. Ransack and Crumplezone tricked Hot Shot and Dirt Boss into believing that a race between them would determine which of them would be allowed to race Override for the Planet Cup. During the race, Ransack and Crumplezone caused a rockslide that buried Hot Shot. Hot shot was saved when Optimus Prime, Vector Prime, and Landmine arrived, but Optimus was upset that Hot Shot had become involved with the locals. Clocker and Brakedown were eager to help the Autobots. After being unable to obtain the Planet Cup from Override herself, Optimus Prime endorsed Hot Shot's plan to win the cup in a race with the aide of the other Autobots. Ransack and Crumplezone were contacted by Megatron and were told to keep on eye on things. They also decided to enter the race, either to win the cup and cause as much damage as they could to the other racers. Override, Dirt Boss, Ransack, Crumplezone, Optimus Prime, Hot Shot, Red Alert, Landmine, Clocker and Brakedown participated in the qualification round.
This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
JETWING OPTIMUS PRIME Black Ver. is a black, teal, and chrome redeco of Jetwing Optimus Prime exclusive to the Asian market. He appears to have been based on the cancelled TakaraTomy contest prize Jetwing Optimus Prime Black Version (see above), with a few color alterations here and there, plus the obvious addition of chrome. It was originally solicited by online retailers as the far goofier-sounding "Dark Nightwatch Jetwing Optimus Prime".
This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
This sculpt was redecoed from the Generation 2 Gobot Firecracker. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic. It was redecoed again for the third wave of Go-Bots to become Sideswipe (who Prime really looks a lot like), and would later be used to created Robots in Disguise R.E.V..
Offered as part of a Lucky Draw campaign in August 2004, this extremely rare version of Masterpiece Convoy is almost entirely vacuum-metalized gold, lacking any other painted detail or stickers. The parts which are not viable are molded in a flat golden plastic; the only exceptions are its rubber tires, the core of the Matrix and the energon-axe, which remain black, blue and orange, respectively. Whether or not the figure was intended to evoke Optimus Prime's entirely-golden appearance in the cartoon episode "The Golden Lagoon", when he was coated with electrum, is unknown; given that entirely chroming a figure gold is a fairly standard deco for Lucky Draw figures, it may just be happy coincidence more than anything else.
Unique lists featuring pop culture, entertainment and crazy facts. Covering the hottest movie and TV topics that fans want. The most LOL-worthy things the Internet has to offer. A fresh take on sports: the biggest news and most entertaining lists. The only place to satisfy all of your guilty pleasures. The go-to source for comic book and superhero movie fans. Pregnancy and parenting news, given to you in a way nobody else has. The Most Entertaining Quiz Site In The World. The World's Most Entertaining Car Website A one-stop shop for all things video games. Website for moms seeking advice, community, and entertainment. Simply the World’s Most Interesting Travel Site.

The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation 1 Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, while various other decos have been replaced by copper.


The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
×