But up first, as we said, is The Last Knight. The teaser trailer was released earlier this month and boy did it tease a doozy: it depicted Optimus Prime and Bumblebee fighting. Yes, the two old pals, mentor and protégé of sorts, were locked in fisticuffs, the Autobot leader giving Bee a sound pounding. There are a number of theories as to what’s going on there, but what we do know is that it promises an intriguing storyline for our favorite yellow robot, and it may well lead directly into the plot of his solo flick.

In Transformers Ongoing, which takes place two years after the events of All Hail Megatron, the Autobots would remain on Earth as Prime feared the return of the Decepticons. Unfortunately, this led to the capture of a number of Autobots by Skywatch, including Windcharger, Gears and Prowl. Hot Rod was reformatted into a Pagani Zonda. Already frustrated, he lashed out at Optimus, accusing him of keeping the Autobots on the planet because he needed someone to protect and demanding he be allowed lead a team to rescue Prowl. An admonished Prime agreed to a covert operation, but with Ironhide along to watch over things. While Prowl was freed, it turned out the humans had used him as bait to draw the other Autobots in. However Wheeljack's new shielding protected Hot Rod's team from Skywatch's inhibitors and in a panic the soldiers switched to lethal measures. Hot Rod was targeted and Ironhide was killed protecting him. An enraged Hot Rod turned on the humans, damaging their equipment and machinery.
Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
Like Chomp & Stomp Grimlock, his truck kibble from the back can accommodate One-Steps and Power Battlers (Both Hasbro and TakaraTomy), activating his various voice clips and flashing lights by interacting with the magnets in their feet. He is notably less kibbly than other AOE Optimus Primes...from the front, at least. The back and sides are not so promising with large chunks of Western Star truck kibble hanging off his legs, making him look as if he's wearing a petticoat. At least the jetpack helps balance the whole thing out....
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.

In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.


This line features robot versions of various Star Wars characters. Confirmed figures are Darth Vader, Luke Skywalker, Boba Fett, Commander Cody and Jango Fett. Darth Vader turns into his custom Tie Fighter while Luke Skywalker turns into an X-wing. Jango Fett and Boba Fett become Slave I, and Commander Cody turns into a Turbo Tank. There is combiner of Millennium Falcon of two characters, Han Solo and Chewbacca and Primus/Unicron-like Death Star that transforms into a giant Darth Vader. There are more Star Wars characters into Transformers like General Grievous and Obi-Wan Kenobi. This line was later revived and merged into the Transformers: Crossovers toy line, many more Transformers included characters from Star Wars: The Clone Wars like Ahsoka Tano who transforms into her Jedi starfighter, and Captain Rex who transforms into an AT-TE.[3]
[…] What Happened with LEGO When I was working on my last presentation, I totally had the idea of buying a bunch of lego people and taking pictures to make the slides (like those awesome slide decks you see online).  However I was surprised to find that you didn’t just buy a pack of people, but you could buy different bodies, heads, beards, hair, and other accessories – oh, and they weren’t cheap! […]
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.

The Japanese version of the toy, named "Optimus Prime Revenge Edition", was exclusively available at Tokyo Toy Show 2009, and later also from e-HOBBY. Despite being sold in Hasbro packaging like the mass retail Revenge toys in Japan (plus the addition of Japanese stickers marking it as a Japanese market release and containing Japanese safety warnings and manufacturer information), it slightly differed from the Hasbro version insofar as it lacked the tampographed kanji lettering.
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
Available only via mail-order through Dengeki Hobby magazine, this black and gray redeco of Optimus is one of four "Black Body" promotional Robot Masters toys made available through different outlets simultaneously. He came with his normal accessories (it is worth noting his axe was solid silver), plus a chromed-gold clear-red-plastic version of Psycho-Orb's "Calamity Defenser" solitarium shield.
In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
Animated Optimus Prime, in an Earth-based fire truck mode, appears as a hidden character in the Transformers Netjet video game by Hasbro. Instead of being leader of the Autobots, Prime was actually a washout from the Elite Guard. Despite no longer being a member, he maintains his military ranking of "Prime". The scale chart released for the series indicates Optimus Prime stands about 22 feet tall.[13]
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)

Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.

The first release in the Asian-exclusive Asia Premium Series toyline is an extensive redeco of the previously-Japanese exclusive Striker Optimus. He features a comprehensive paint scheme directly based on Jetpower Optimus Prime, with blue pinstriped flames, lots of silver paint, and vacuum metallized parts, although his hands are left unpainted in favor of painting his mirrors silver. Along with his standard accessories, he also comes with 2 battle blades, which were previously exclusive to Toys"R"Us Japan. He features the "We must stop the Decepticons!" voice chip, but batteries are not included. Rather helpfully, his instructions are supplemented with text instructions written in English for all the steps, as well as the additional photographs used for the previous Striker Optimus toy.
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.
The cab transforms into the robot mode of Optimus Prime himself, with the addition of a pair of removable blue fists that plug into his headlights. The fists themselves do not store anywhere in vehicle mode, but can fit easily in Prime's opening chest compartment (originally designed to accommodate two Diaclone driver figures). Prime is armed with a black laser rifle that, due to design, he cannot hold straight.
×