Prime filled one of the chase figure slots for the tenth wave as well. This rare figure was the same as the regular Super Mode PVC, except instead of wielding his Convoy Gun, Prime was armed with the Star Saber sword. As with the previous chase figure, it could only be found in one out of every ten cases, and took the place of the full-colour Prime figure in that assortment.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile. With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
This is a redeco of Ultimate Optimus Prime. While Prime himself only features a red grill, the trailer has been extensively redecoed, with an ornate golden Chinese dragon being painted on the trailer panels, and the various gray parts of the trailer panels, armor, and cannon being replaced by blue, red, gold, and burgundy. The toy was released as a "Year of the Dragon" Special Edition in 2012, since the Chinese Zodiac sign for that year is the Dragon.
Megan Fulton, Tim Johnides, Jeff Williams, Dante Lauretta, Magnus Dahlsröm, Jayson Peters, David Michael, Gerry Tolbert, Andrew Smith, Ray Wehrs, Joel Becker, Scott Gaeta, Beth Kee, Joey Mills, talkie_tim, Danny Marquardt, Adam Bruski, John Bain, Bill Moore, Adam Frank, Lacey Hays, Peter Morson, James Needham, Matt Fleming, Adam Anderson, Jim Reynolds, Seiler Hagan, Bryan Wade, Petrov Neutrino, Jay Shapiro
Refractor and Laser Prime were only available in a box set named "Chaos on Velocitron" that includes Dynamus and Quickswitch, Parsec and Autobot Nautica, Fastclash, and a Rodimus Prime Titan Master head. The set was officially announced by Hasbro to be a Toys"R"Us exclusive, and was sold at stores in the United States, Canada, and Hasbro's Asian markets (such as Malaysia, Singapore, and Hong Kong). Despite this, it later became available via Amazon in the United States (but not in Canada) as well, actually sold by Amazon directly (as compared to a third-party seller).
Optimus Prime is composed of two parts, his truck cab and his trailer. His new truck cab is reminiscent of the original Optimus Prime truck cab, but is constructed entirely of plastic, lacks vacuum-metalized plastic and has no clear windows. It also transforms differently in that the front of the truck is no longer the robot mode's chest. His chest is now formed out of the truck's cabin rear, styled after his cartoon appearance. He is armed with two long black rifles, based in part upon his cartoon rifle.
Stewing in a cell, Optimus blamed himself for their predicament, but he and the Autobots were soon rescued by Broadside and Sandstorm. Sandstorm and Optimus traveled through Cybertron's Old Slave Trails, only to find themselves ambushed by Runabout, who swiftly killed Sandstorm, and then the Decepticon was attacked by a Sharkticon, which lunged at Prime. Cold War Prime recovered to find himself in the care of a group of Autobot rebels including Hot Rod, Blurr and Kup. Though Optimus lashed out at Gnaw upon awakening, the other rebels quickly cleared up the misunderstanding, assuring Prime that the Sharkticon was their ally. They revealed to Optimus that Shockwave had been transmitting subliminal signals to increase Transformer aggression, readying them for war against an unseen foe. At this point, another rebel cell joined up with them with dire news: Shockwave had unleashed the Omega Sentinels on Iacon! Passive Aggression
Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance. As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More
Optimus Prime was one of only two Armada-theme figures in the otherwise Generation 1-centric Q-Robo Collection line of super deformed PVC figurines, the other being Armada Megatron. Like all the figures in the series, Prime featured articulation in the neck and shoulders, and was also available in a translucent colored plastic: as an Autobot, Optimus came in translucent red, but was also uniquely available in a golden metallic "pewter" variant as the wave's solitary rare chase figure. All Q-Robo figures were sold in sets of two, one full-color figure and one translucent one, blindpacked in a plastic capsule.
An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.
Once again Optimus Prime and Megatron were re-engineered, with Prime now a fire truck and Megatron a six changer, whose modes included a dragon, bat, jet, land-craft and a giant hand. Another G1 character to get a new toy for this line was Ultra Magnus, who could combine with Optimus Prime to form Omega Prime. Other combiners were created for the series too, such as Landfill and Rail Racer. Bruticus, a combiner from G1 was also recoloured and introduced into the series, with a coinciding toy re-release. The Combaticons that formed Bruticus were the first of the Decepticons to be introduced into the show along with Scourge, who as a toy was a black repaint of G2 Laser Prime. These were not the only toys to be re-released for this series, with many from past lines being repainted and packaged in RID boxes. Robots In Disguise was responsible for introducing a lot of concepts that would be re-used often in the next incarnations of Transformers.
As the Autobots were having trouble with Rumble, Optimus Prime told them try to use his earthquakes to their advantage, which led to the end of the Decepticon. Prime subsequently ordered the Aerialbots to combine and save Grimlock and Roadblock from falling off a cliff. Wolves As they got closer to the Cobra Terrordrome, however, Prime started regretting getting the Autobots involved with the humans' war. He offered to carry G.I. Joe across the water separating them from the Terrordrome, but told them that Autobots only fight if they have no choice, and they had no reason to fight anymore. Moments later, he saw that Cobra were using innocent prisoners as human shields, and Duke added that anyone who Cobra didn't enslave, they murdered. Filled with righteous anger, Optimus Prime ordered his troops to roll out. Trenches
This sculpt was redecoed from the Generation 2 Gobot Firecracker. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic. It was redecoed again for the third wave of Go-Bots to become Sideswipe (who Prime really looks a lot like), and would later be used to created Robots in Disguise R.E.V..
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.
This exclusive redeco of Optimus Prime features darker shades of red and blue than his other releases and has extensive paint applications to resemble his on-screen appearances in The Last Knight, particularly his Nemesis Prime alter ego seen in the film. To that end, he features movie-accurate flame patterns, which are larger and more elaborate then the ones on the regular release or the SDCC exclusive, on his vehicle mode exterior and robot pectoral armor. His eyes and sword are also painted metallic purple, but his shield is completely unpainted for some reason.
I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.
If Optimus went along with Perceptor’s plan, he sent out Sparkplug to fetch the Autobots’ secret stash of emergency fuel. Putting all of his faith in the Autobot scientist to uncover a cure swiftly, Optimus attempted to comfort his troops as they all began to experience sickness pains. Then, Red Alert informed Optimus of a Decepticon attack force moving in on their position, prompting Optimus to ask Perceptor to dispense whatever cure he had been able to concoct, despite it being untested. Perceptor suggested another course of action to Optimus; the tainted fuel the Autobots had left untouched could be used to create a poisonous smog if lit aflame. The Autobots could attempt to poison the Decepticons with their own concoction, or they could risk the untested antidote, despite whatever side-effects it may have.
Using the Spacebridge to travel to Earth, Prime was sidetracked when Megatron transported him to Unicron's body. Megatron attempted to cajole him into distracting Unicron long enough to transfer his consciousness into a new body. Prime refused until Megatron showed him what was happening on Earth. A massive Terrorcon invasion had devastated many of Earth's greatest cities, with the stalwart Autobot defenders nearly overwhelmed. Megatron offered to deal with the invasion if Prime would aid his rebirth. Out of options, Prime agreed, and battled Unicron's internal defences to disable a sensor, allowing Megatron's resurrection. As Megatron teleported to Earth to keep his end of the bargain, Prime, still inside Unicron, prepared to fight back.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More