If Powerglide did not heed Optimus orders, he indadvertedly caused the water supply to be poisoned anyways. If however, Powerglide listened to Optimus’s orders, the Autobots attempted to lure the Decepticons away from the reservoir and into some nearby woods, where the Autobots would have some cover against the Decepticons. Finding themselves under heavy fire before they could reach the treeline, the Autobots were forced to fight back in the open. With Autobots falling beside him, Optimus gritted his teeth and took careful aim at the poison containers the Decepticons were carrying. After taking out both of the planes carrying the poison, Optimus continued to battle Megatron and his Decepticons until nightfall, until the Autobots were finally victorious.
On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial
For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.
This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.
Once combined, DaiKenzan has three new phrases (spoken in Kenzan's voice), while DaiGekisou has four (in Gekisoumaru's voice). In either combined form, pressing and holding the button activates an additional, longer phrase for their "final attack". DaiGekisou is armed with a scissors-esque "shuriken" made from combining Optimus Exprime's two swords, while DaiKenzan simply wields them separately.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.
Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.

Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation One Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie. ...Because there are so many longnose cabs driving around Mars. Yeah.
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
Excellent article. Especially for pointing out how different we remember things from ‘when we were kids.’ (I swear Optimus Prime was two feet tall!) My only criticism is linking to those two Brickset articles about supposed “quality decline”… the headlines are sensationalist and inflammatory, and a LEGO rep eventually replied to the spurious claims with information that deflates much of the (somewhat unfounded) criticism. Also the comments give me a headache. Otherwise great stuff!

With the Japanese Binaltech toy series having transformed into the Kiss Players line, the second figure to be released as a Kiss Players character was Hot Rodimus. Based on the same Ford GT mold as Mirage, Hot Rodimus features several differences from Mirage. First, it has a unique head sculpt, which includes a movable crest to allow a "visor" to be lowered over his eyes, referencing a scene from the animated Transformers Movie during which Hot Rod is on Lookout Mountain. Additionally, it includes a fishing-rod accessory, which can be split and connected in a different configuration to create a tri-barreled arm weapon, reminiscent of Hot Rod's exhaust-pipe blasters. The figure also includes a PVC figurine named Syao Syao and a CD featuring a Kiss Players radio drama. The vehicle mode stays true to the Ford GT's factory color scheme, lacking Hot Rod's signature "flame" detailing, and, like Binaltech, is fully painted. Meanwhile, the robot mode reveals additional orange and yellow body parts, such as the chest, abdomen, arms and hands, as well as flame-like paint applications on the lower arms to link the figure with the original Hot Rod.
Optimus became the leader of the Autobots for a time, then disappeared, leaving his people to be ruled tyrannically by Megatron.Targetmasters Megatron never stopped seeking out his old foe, rewarding any of his troops that provided him with information that could lead to Optimus's whereabouts. The Golden Boys As for the Autobots, they were uncertain exactly as to why Optimus had disappeared; some believed Optimus had simply abandoned his troops, while other believed he was fulfilling some greater purpose and would return to them in their hour of need. Ultimately, it was Snake-Eyes and Duke who found the Autobot leader, lost in the void between dimensions. Form Follows Function There, the three of them became ensnared by the Quintessons. They escaped the extra-dimensional entities' mind-probe and made their way back to normal space. En route, Optimus learned from Duke that Bumblebee had traveled to Earth and met his demise there. His human companions went off to help their friends on Cybertron, while Optimus headed for T.H.E. P.I.T. on Earth, eviscerating numerous Coltonbolt satellites as he entered the atmosphere. Everybody Hates Metroplex
Rounding out a bumper year of Japanese-exclusive Generation 1 Optimus Primes, the Takara-licensed Kawada brand Diablock Convoy is a fully transformable Lego-style block building figure similar in premise to the earlier American Built to Rule sets. The Diablock figure, however, easily outstrips the Built to Rule sets by both being an accurate representation of the toy on which it is based, and being able to transform between modes without having to be partially disassembled and put back together first.
On the day before the Transformers GT began, GT-R Prime found himself racing with GT-R Saber when they were both out for a test run. Though Misaki warned him not to get too invested in a practice race, Prime took the challenge seriously and won the race by briefly transforming into robot mode, thus tricking Saber into slowing down in anticipation of a fight. Test Run Battle! –Prelude– Prime earned the pole position for the Transformers GT, but this combined with his victory over Saber made him overconfident, and he was unprepared when Saber attacked him immediately as the race began and sent him flying. First Fast Attack! –Whoever Strikes First Wins– GT-R Megatron also targeted Prime during the course of the race, seeing him as his fated rival. One Shot and One Kill!! –Finishing Blow–
Optimus got Megatron's contact information off the internet and invited the Decepticon leader to BotCon 2009. Though it took some doing, he managed to convince Megatron that the convention would be worth attending. Optimus also planned on going to BotCon, and left for the convention alongside Wheeljack, Mirage, Ironhide, Jazz and Prowl. BotCon 2009!
Available only via mail-order through Dengeki Hobby magazine, this black and gray redeco of Optimus is one of four "Black Body" promotional Robot Masters toys made available through different outlets simultaneously. He came with his normal accessories (it is worth noting his axe was solid silver), plus a chromed-gold clear-red-plastic version of Psycho-Orb's "Calamity Defenser" solitarium shield.
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
Part of the new Adventure Shokugan series, this Optimus Prime is a transformable snap-fit kit molded in red, blue, and yellow plastic with detailing from stickers. The kit's transformation engineering is borrowed from the Warrior class figure. But unlike the said toy, the Axe must be pegged onto Prime's legs before transforming, and his shoulders are molded on his front truck halves/shoulders not being flipped down. Also, the stickers are used to cover the molded cavity on the front shoulders. As with Fixit & Underbite, Optimus Prime is fully transformable.
Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). The main torso-bot is based on Generation 1 Optimus's original body. Another limb-bot is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
Legion Class Optimus Prime is a redeco/retool of the first Revenge of the Fallen Legends Class figure, with the deco resembling the paint job from Optimus Prime's Western Star "5700 OP" concept truck. While the main body is identical to the figure, the arms and legs are newly tooled, with simple assemblies for the wheels. The retooled legs now features a more solid stopping point, which prevents the center front grill/legs to swing back further. It should be noted that his flame decals are painted over the side windows.
Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Aware of the changes to the timestream and the potential for the entire Autobot race to be annihilated by Unicron, Optimus put into motion Operation Distant Thunder, a plan to undo the damage to the timeline caused by Ravage, restoring the events that were seen in the movie. This would mean that saving all the Autobots from Unicron would result in Prime and others such as Prowl, Wheeljack, Ironhide, and Ratchet would die per the original events. They hoped they would be able to at least partially avoid such an outcome by sending a message to their past selves about all they had learned.
He comes with the Star Saber, which has a 5mm handle and a post on its hilt, as well as two spring-loaded, missile-firing "Ionic Pulse Launchers" (which are called "Eaglefire Missile Launchers" in the instructions). The launchers each feature a 5mm post, have flip open prods, and can peg onto the ports near the wheels on his robot back, giving him a pair of back-mounted rocket engines.

Part of the first wave of Prime: Beast Hunters Series 3 Cyberverse Commander Class toys, Optimus Prime is an all-new mold. He now transforms into a monstrous, flat-nosed truck with spiky fenders at the front and a cage compartment at the back, and comes with the Thunder Lance and Star Saber. Each of the weapons features two differently-placed 3mm posts, allowing them to be held by his hands, or mount onto two ports on the rear vehicle sides, as well as allowing the lance to additionally be used as a pressure-fired missile launcher.
Most notably in terms of new tooling, the panels on the undersides of Powermaster Optimus Prime's forearms feature slots under the fists, which allow the guns to tab in and be held much more stably than with Ultra Magnus. And due to the amount of empty space in the cab area in vehicle mode, Powermaster Prime can fully transform without the need to remove his head.

The live-action Transformers movie was slated to premiere in the U.S. on July 3, 2007, and was a joint collaboration among DreamWorks SKG, Paramount Pictures and Hasbro, Inc. Paramount Pictures was slated to release the film in the United States, as it had by now made DreamWorks Pictures one of its wholly owned subsidiaries, and was also to be responsible for the international release of the film through United International Pictures, its joint venture with Universal Studios. The feature was directed by Michael Bay from a screenplay written by Alex Kurtzman and Roberto Orci. It was a new story, set apart from the previous incarnations of the cartoon(s) and comic(s). A new origin and characters were introduced. Steven Spielberg, who with Jeffrey Katzenberg and David Geffen had established DreamWorks SKG, was the main executive producer of the film, with Lorenzo di Bonaventura, Tom DeSanto and Don Murphy serving as co-executive producers. In practice, this meant that they were the primary financial sponsors of the film.

Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.
The Decepticons' initial strike came abruptly and brutally, devastating entire districts of Metropolis. Optimus was meeting with Hot Rodimus as this took place, and was nearly overcome with grief when Ratchet informed him of the carnage the Decepticons had wrought. Steeling himself, Optimus coordinated the city's defenses, ordering his troops to be dispatched where they were most needed to repel the invasion. Upon spotting an old enemy on one of the nearby monitors, Optimus geared up to go in the field himself. Arming himself with his favorite pistol, Optimus resolved to take down Megatron. Raid
Billed on his packaging as "BIGGEST Optimus Prime Toy!", Ultimate Optimus Prime consists of an articulated tractor-trailer. The cab can transform into a "normal" Optimus Prime on its own, roughly equivalent to a Voyager in size and complexity, though with a lower degree of screen-accuracy than most large Optimus toys. Prime has 5mm fist holes, as well as additional 5mm ports on his front wheel wells and both sets of external fuel tanks. Four of these remain available in robot mode. The trailer has twelve more 5mm ports. Despite this, the toy comes with no weapons scaled such that the cab-only robot can usefully wield them.

The cab is yet another iteration of the original Optimus Prime/Convoy toy, based on the Ultra Magnus retool, as distinguished by the elongated hubcap pegs on the front wheels. Indeed, the iPod-aesthetic, all-white deco would make you think this figure should be Magnus, but no, the packaging clearly says "Convoy", making it twice in one year that Takara has released a white-redeco Prime that isn't Magnus.
Part of the Legend Commander Collection sold at Transformers Expo, Convoy is a redeco of Robotmasters G1 Convoy. While most of the paint masks are identical to the original mold, other changes includes replacing the transparent parts into clear blue plastic, and the panel-lining on the grill is stripped off. Unlike the first toy, he does not include a pair of swappable 3mm fists, his missile launcher, or his Calamity Defenser weapon.
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)

During the war, Optimus was killed in battle by Megatron, but was eventually resurrected. The Fight Begins Coming to the dire realization that the war against the Decepticons had become a never-ending arms race, Optimus Prime challenged Megatron to single-combat, with their troops acting as witnesses to their terrible and final clash. The battle between both faction leaders ended with Megatron beaten down and goading Optimus into delivering the kill shot...
A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.

The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)
The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
Available exclusively through e-Hobby, this black and teal repaint of Hybrid Style Convoy features the traditional "Nemesis Prime" color scheme, but represents a version of Optimus Prime himself. In addition to all the original accessories, the toys also includes several more deliciously metatextual goodies, themed around the Generation 2 toy and comics: two new large guns patterned after the new weapons wielded by the Generation 2 Optimus Prime toy, and two additional (blue) Prime heads that can be swapped with the figure's regular noggin, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger. One head is pristine, the other decorated to match the battle damage seen on the cover of the first Generation 2 issue.
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
The back story of the Transformers on ancient Cybertron is told in Transformers: Defiance. In this story, Starscream returns to Cybertron after encountering an enemy scout ship in the Eshems Nebula. After being repaired for minor damage by Ratchet, Starscream and Ironhide report to Optimus Prime and Megatron.[63] In issue #2, Optimus Prime is ordered by Megatron to counter-attack Cybertron's invaders, but instead, Optimus organizes a resistance to Megatron's decision. In issue #3, Optimus Prime, Jazz, and Prowl break into Megatron's quarters while he is away looking for clues to why he is acting so strangely. What they find is an ancient artifact that Megatron had restored.[64]
Seibertron member, carytheone, has directed us to CarScoops.com, which has revealed that General Motors are to be auctioning off four of its Transformers Movie Camaros from Transformers: Revenge of the Fallen, Transformers: Dark of the Moon, Transformers: Age of Extinction and Transformers: The Last Knight. The car itself was as much of a star as the Transformers themselves and even the actors, so the interest is bound to be high. These are surely the auctions for “big bucks” Car - Read More
Released as part of The blindpacked EZ Collection Real by TakaraTomy's "TakaraTomy A.R.T.S", this Optimus Prime is an extensive redeco of the Revenge of the Fallen Legends Class figure, sharing the same paint mask with the Battle Damaged figure sans the weathering. Like all land-based vehicles in this line, He also features an extra paint applications on the wheels rims. This redeco also uses the slightly small fuel tank/elbow tabs.
In "The Elite Guard", the Autobot Elite Guard, composed of Ultra Magnus, Jazz, and Sentinel Prime, arrive on Earth to reclaim the Allspark. They don't believe Optimus' story about the Decepticons and Sentinel Prime wishes to have him court-martialled. When a fragment of the Allspark causes a production line to go haywire, Optimus finally stands up to Sentinel, retrieving the fragment, and earning praise from Ultra Magnus.
The morning after a particularly vicious battle, Optimus listened to birdsong and pondered life as a giant robot, before asking Ratchet and Huffer for a damage report. The Autobots were puzzled when the Decepticon Seekers (and Laserbeak and Buzzsaw) did a flyby on their camp, as the Decepticons were similarly damaged after the battle, but Shooting Star reported that the Decepticons were trying to distract them while an attempt was made to secure a broken-down oil truck a few miles away. Optimus took a small group to investigate, and successfully aided the humans in getting their truck moving. Swoop was instrumental in stopping the Decepticon attack, and Optimus commended the Dinobot for his valor. Decepticon Hijack

Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).
If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.
A five-inch tall, non-transforming highly-articulated PVC figure of Optimus Prime in his Super Mode was the eighth entry in Takara's Mega Super Collection Figure series. In addition to a non-transforming figurine of Sparkplug, Optimus comes with two sets of alternate hands—one set with spread palms, one curled into fists—and is armed with his Convoy Gun, which can either peg into his right fist (and only his right fist) or onto his back.
Transported to a parallel Universe, as the walls of reality began to crumble, foretelling the coming of Unicron to the Armada universe, Optimus Prime and Jetfire were reformatted by their Mini-Con companions using the Mini-Con Matrix into new "Powerlinx" forms. Optimus Prime and Jetfire combined to hold the chaos-bringer at bay. Unicron was eventually defeated by the united power of the Mini-Cons.
Prime is armed with a spring-loaded missile launcher that stores on the rear of his truck mode (which becomes the backpack of his robot mode) when not in use. Like most of the weapons of the Energon line, it sports a 5mm post, allowing it to be held by most every Enegon figure, to combine with assorted other weapons and Energon weapons released in the series, and to peg into numerous compatible ports shared by many figures, like the hole in the radar of Prime's own trailer, or even conveniently placed 5mm screw holes like those of the Prime Force.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
×