Though Optimus was a master marksman, he had a personal policy against shooting directly at his opponents' bodies during his races. In one such race, he allowed his rival to take the lead so that he could use his favorite weapon, the Impact Wrench Gun, to blast the road beneath the other racer's feet, causing him to lose his balance. Transform in a gust! When GT-R Megatron burst onto the scene, roaring that all previous races had failed to "ignite his warrior's spark," Optimus readied to give him the race of a lifetime. GT-R Megatron Attacks! Like other racers, GT-R Prime attended photo shoots alongside Misaki in order to promote coexistence between humans and Transformers. The Work of the GT Sister Race Queens? When a reincarnated Unicron attacked the Transformers GT finals and absorbed the huge energon pool saved up for the final prize, Prime restored his true power by using the "Matrix In" process to recombine with Misaki. Together with the other powered up racers, he fought and defeated Unicron, saving the Earth. The True TFGT
When IDW Publishing received the rights to the series, author Simon Furman was hired to oversee the line. Furman decided that the Generation 1 continuity "was in need of ... a contemporary restart"[15] so that the comic could retain a modern audience. Furman's revised continuity establishes Optimus Prime as the present-day leader of an Autobot army spread across the galaxy in small units, waging a covert war against teams of Decepticon infiltrators over resource-rich worlds. The Stormbringer miniseries explains that the Transformer homeworld of Cybertron is a dead planet, ravaged by an ancient cataclysm caused by the Autobot-Decepticon War. Prime had been forced to ally with his arch-rival Megatron to end the destruction. In the series, the interference of Jetfire and the Technobots, in a plot organized by the Decepticon Bludgeon, alerts Prime to the possibility that the Cybertronian cataclysm might be re-ignited and spread to other planets. Prime calls in the Wreckers, meeting them on the surface of Cybertron in time to witness the return of the being called Thunderwing, the focal point of the apocalypse. The combined efforts of Prime, the Wreckers, Jetfire, the Predacon-led Decepticons, and a unit of aging Centurion drones are barely enough to render Thunderwing inert.
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
The SS-03 version of Takara's Deluxe-class Optimus figure, based on the Anniversary release, was released in Hasbro markets in a two pack with the smaller Japanese Megatron figure. There are some tiny but notable differences between this and the Anniversary figure; the Hasbro version uses a more neutral dark-gray for the main body as opposed to the Takara version's blue-tinted dark-gray, plain dark-blue plastic rather than dark-blue-with-sparkles, and plain yellow paint for the cab's lights rather than sparkly-yellow/gold.
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
The earliest releases of Energon Optimus Prime have no ridges on the inside of the chest windows and a different head sculpt featuring an Optimus Primal-style mouth-slit in Prime's mouthplate. This was soon replaced with a full mouthplate, and it was this version of the toy which appeared in the Energon cartoon and was released by Takara. Other changes made to Takara's version of the toy involved a chromed front grill, more vibrant plastic colors on Digger-3 and Submarine-4, a darker blue plastic on Prime himself, and more intricate paint operations. Takara's release lacks the electronic sound effects seen in Hasbro's version, which were commonly gutted for the Japanese releases of any Autobot toys who had them, though Prime retains his light-up chest.
Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.
In Transformers: Autobots, Optimus Prime meets up with the other Autobots to give further commands to his troops. Create-A-Bot, the new rookie, is eager to help in the cause, but Optimus tells him to sit back while the other Autobots fight the Decepticons. Create-A-Bot finally defies orders and completes a mission against Optimus's council. After nearly getting himself and the other Autobots killed, Create-A-Bot apologizes to Optimus personally. Taking pity on the newcomer, Optimus lets him off with a stern warning, and they move out together to face Megatron, who has absorbed the power of the Allspark. Optimus fights Megatron, but Megatron gains the upper-hand. Optimus is on the verge of defeat when Create-A-Bot takes the Allspark and drives to Megatron's chest, weakening Megatron but mortally wounding himself in the process. Optimus fights Megatron again, defeating him. As Megatron is on the ground, he tells Optimus that if he kills him, the Allspark will be destroyed and Cybertron will never be restored. Optimus says to Megatron that he will do what he must do, then he raises his sword and kills Megatron, destroying the Allspark in the process. Create-A-Bot also dies, but not before telling Optimus his final request to make Earth the new home of the Autobots and to protect the humans. The game ends with Optimus sending a message to all surviving Autobots taking refuge among the stars.
Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colours of the actual series, and a metallic-paint version (pictured), which is less show-accurate but more shiny. The plain-colours version was the first release and has an Autobot symbol tampograph on his shoulder as per the cartoon, while the later metallic-finish version instead came with a decal sheet.

Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
Originally, Optimus Prime was created as the leader of the Autobots, though it is unknown how he was created or his origins. In a possible future, Megatron was threatened by the existence of the Aerialbots and had Shockwave build a time machine to send them back in time to get rid of them. However, he only ended up changing history for the better. In the revised timeline, Optimus Prime began his life as a robot named Orion Pax, a mostly defenseless dock worker during the Golden Age of Cybertron nine million years ago, with a girlfriend named Ariel and a best friend named Dion. During this time, a new breed of robot with new flight capabilities appeared on the planet that Orion idolized. When Megatron, the leader of the new group of robots, approached him with inquiries about using one of the dock warehouses, Orion was swayed by Megatron. Both Orion and Ariel were severely wounded when Megatron and his forces attacked in order to claim the energy stored there. Searching for someone to help them, the time-displaced Aerialbots took Orion and Ariel to the ancient Autobot, Alpha Trion, who used them as the first subjects for the new reconstruction process he had developed involving rebuilding the frail Autobot frames into more battle-hardy configurations.

Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
Designated "Optimus Prime" rather than the traditional Japanese "Convoy", this figure is a redeco of the previous Music Label Convoy figure into the character's traditional red, blue and silver color scheme. Unlike previous re-issues of the mold, iPod Optimus Prime's sports a paint application similar to KissPlayers Convoy, having its ABS/PVC parts painted over with a thin layer of his iconic red, white (silver if you will) and blue motif paint applications (with the exception of his iPod docking trailer). This includes his trailer, though the effect is somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three "Optimus Prime" logos. The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this is largely covered when an iPod is inserted. The figure comes in identical packaging to the original Music Label Convoy, save for the addition of a sticker illustrating the different color of its contents.

the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
Prime comes with all the accessories of his previous release, although his ever-changing ion blaster is now somewhat confusingly cast in blue plastic. He features one major additional accessory: an electronic display base sculpted with the image of the Matrix and the Autobot insignia. Pressing the insignia's crest triggers a series of electronic soundbytes, mostly quotes from the movie recited not by original actor Peter Cullen, but by Hasbro's in-house actor, Ron Hayden: "Autobots, transform and roll out!", "I want you to make a special run to Autobot City," "Megatron must be stopped!", "All we need is a little energon, and a lot of luck," and two samples of the classic transformation sound effect, one ascending, one descending.

Optimus battled alongside the Alternity to fend off the beast, when unexpectedly, Megatron overwrote the beast's higher functions with his own. At first, it seemed that the Hytherion had been killed, but a newly empowered Megatron (in two bodies) appeared and declared that, now possessing a power that rivaled the Alternity's, he challenged his opponents to take him on or see the multiverse itself burn. To Mega Therion
When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Released exclusively in Asia, Shadow Spark Optimus Prime is a redeco of the Age of Extinction Leader Class Optimus Prime, featuring dark grey plastics, weathered deco patterns, and some opaque plastic which was recasted from transparent plastics. He features a scratched Autobot insignia on the right side of his sleeper-cab, and a Cyberglyphic on the left side of the front hood. Some weathered parts does not match well with some other parts (the fenders, for example).

This version of Leader-class Optimus Prime features a new lower face sculpt that lacks a faceplate, as well as the replacement of his fuel tank/exhaust assemblies with new, transforming versions that can combine into his ion blaster/barrage cannon. To the simultaneous pleasure and displeasure of people who had already purchased the first release of Leader-class Revenge of the Fallen Optimus Prime, Buster Optimus Prime features an extensive paint job that closely matches Prime's appearance on the big screen, including covering almost all of his grey plastic with silver paint or chrome, expanding and outlining all of the flame tampographs white for greater accuracy to ILM's computer model, and generally painting in small details, nooks and crannies that were neglected on the first release due to cost-cutting reasons. The red and blue plastic colors also vary from the original release, to better match his film appearance.
Standing only two-and-a-quarter inches tall, Smallest Transforming Transformers Optimus Prime was the smallest fully transforming G1 Optimus toy for a while, at least until the release of his chubby super-deformed Q-Transformers versions. He features an accurate transformation sequence based on the original full-sized toy, replacing the detachable hands with actual sculpted fists, and even including a tiny version of his laser rifle. Unsurprisingly, he also has little articulation and is only capable of moving his arms and legs.
The key sports a tampographed Autobot insignia, a red border, and the Key Code "D56B" tampographed on the back. This code, when entered on Hasbro's website, was supposed to unlock additional information on the character or the toy, but due to an error on behalf of Hasbro, it unlocked information intended for Optimus Prime's wave-mate, the aforementioned Deluxe Class Demolishor; Optimus Prime's information was instead unlocked using the code "dt67", which was tampographed on the back of the Cyber Key included with said Demolishor toy.
The 1984 and 1985 toy lines contained several figures of note. Megatron, the Decepticon leader, originally transformed into a realistic Walther P38 pistol with stock and barrel extensions and scope. The Megatron toy was delayed till 1985 for release in the UK. The Constructicons were the first "gestalt" team in the Transformers line, but were different from most subsequent gestalt teams in that they consisted of six members instead of five. The Autobot Jetfire was repainted from a Macross toy, specifically the VF-1 Valkyrie, and the character was renamed Skyfire in the animated television series program for copyright reasons.

The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot.[16] The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!

A single-packed version of the battle damaged Voyager Optimus Prime toy from the Sam's Club exclusive three-pack. Although the assortment number and the general packaging style (which are both the same also used for the Premium Series redecos of Voyager Class Autobot Ratchet and Megatron) seemed to indicate that this might be a Best Buy exclusive, it was later confirmed to be an "international market" exclusive. It was released in Hasbro's Southeast Asian markets, but was not available in the USA outside the Sam's Club three-pack.


Optimus Prime started life as Optronix (Orion to his friends), Hardwired a data archivist at the Vaults. After taking note of a battle in which the Autobot leader Sentinel Prime had been defeated by Megatron, he was summoned to the Council of Ancients and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, gaining a powerful new body in the process. After dispatching a Decepticon assassination squad sent to, well, assassinate him, he ordered the Autobots to prepare to evacuate Cybertron, intending to leave the Decepticons to their own devices. The War Within #1
The main selling point of the toy is the ability of the truck cab to combine with the trailer to form Super Optimus Prime. The cab portion folded in half and sat in the chest cavity of the trailer's torso, giving him the classic Optimus Prime truck-chest appearance. The two double-barreled cannons were attached to his shoulders and a large, separate head piece was mounted onto the hole on top of the truck cab.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.
×