In a rare move, there were no brick and mortar store exclusives in Western markets for the regular Prime line. The "Rust in Peace" special edition of Terrorcon Cliffjumper was available at San Diego Comic-Con and Hasbro Toy Shop, while the "Dark Energon" series of translucent redecos was sold by online retailer BigBadToyStore. All of the "Dark Energon" toys were available at general retail in Singapore and Malaysia, and the Voyager Class figures were also available at general retail in the Philippines.
Like the larger First Edition figure, you can actually separate the robot mode from his vehicle shell, displaying both of his modes at once... albeit unlike the First Edition figure, this tweak could sacrifice the even stability between those two separated figures. Some of the pieces like the legs/rear wheels are particularly difficult to separate.
A non-transforming but highly articulated Optimus Prime action figure(ine), Revoltech Convoy uses the Revoltech "revolver joints" for maximum poseability. Convoy comes with a Matrix and ion blaster accessories, as well as a few alternate hands. His sculpting is explicitly in the style of Pat "serfdom" Lee's interpretation of Optimus Prime in the Dreamwave Generation One comics, but due to physical constraints has no lack of perspective.
I suspect that part of the problem with people’s perception of price is also due to changes in tastes as they grow up. A small child will be pleased with relatively small sets, since their lego collection and experience is likely to be almost non-existent. But as they get older, they will tire of the small sets and want ever bigger sets. For adults, most of the fun is in building rather than playing, meaning that size is everything. This means that over their lifetime, the price an individual person (or their parent) pays for lego sets does go up–because the composition of their purchases changes–even though the prices of lego sets over time does not.
Optimus Prime is another redeco of Revenge of the Fallen Legends Class Optimus Prime, features gunmetal-stque grey plastic, and his paint operations being similar to the first Revenge of the Fallen Legends Class toy. He is also packaged with Grimlock, himself a redeco of none other than Energon Cruellock. Like other Legion-themed product, he is exclusive to Walmart in the US and Asda in the UK.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
In the war for Cybertron eons ago, Optimus was once Orion Pax, a historical archivist in the Iacon library. Throughout his studies on Cybertron's past, Orion became aware of the social inequality among Cybertron's populace. He became inspired by a gladiator taking the name of one of the thirteen original Primes, Megatronus. Megatronus attempted to start a revolution to overthrow Cybertron's current leadership and take the mantle of Prime. However, Orion preached a different ideology, declaring that violence is not the means to achieve justice, and thus, Megatronus changed his name to Megatron and severed ties with Orion, starting the Great War that destroyed Cybertron. Orion soon ventured into the core of Cybertron and was bestowed with the Matrix of Leadership by Primus, becoming Optimus Prime. After Cybertron became barren and lifeless, he and Megatron took their war to Earth, after which Megatron disappeared for three years. With Ratchet, Arcee, Bumblebee, Bulkhead, and Cliffjumper under his command, the Autobots were granted asylum on Earth by the US government if they kept the Decepticons at bay. However, in "Darkness Rising", the Decepticons return, killing Cliffjumper and target Jack, Raf, and Miko, three children who were seen with Arcee and Bumblebee. Optimus requested they be brought to base and know the full story, much to Arcee and Ratchet's dismay. Megatron returned soon after, wielding Dark Energon and nearly killing Optimus and Ratchet with a horde of reanimated Cybertronian corpses. Optimus later fought Megatron on the latter's space bridge, which Megatron intended to use to bring forth an army of undead to conquer Earth. Though Optimus is nearly killed by Megatron, he is able to gain the upper hand, and leaves Megatron to his apparent destruction when the Autobots destroy the space bridge. However, Optimus later confided in Ratchet that he still mourns Megatron's death, as he had a small glimmer of hope he could be turned to good. However, he does not underestimate Megatron's successor, Starscream.
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball-joints.
Per Ravage's original plan, with Unicron defeated, the Decepticons returned to conquer the transformers. Optimus Prime had also planned for this event, and sent Mirage to press a switch, buried deep within Cybertron, that would render all transformers inert. This was seen at the conclusion of the "Five Faces of Darkness" story arc from the original animated series. Optimus hoped that by rendering all the transformers inoperative, the war would be stopped, hoping that the humans would be able to reactivate the transformers in the future. Instead of deactivating all transformers, however, only those with original Cybertronian bodies were deactivated. Transformers with Earth-made Binaltech bodies continued to function. The Autobots effectively won the war, the large army of Binaltech Autobots easily outnumbering the few Decepticons who had managed to procure Binaltech upgrades. The few Decepticons remaining, effectively just Nemesis Prime and Shockwave, escaped with Megatron and their other inert comrades.
In Super Mode, Optimus Prime can combine with Leobreaker to form "Savage Claw Mode", which sees the feline Autobot become a gigantic clawed arm for his leader. Alternately, if Prime's backpack is removed, he can merge with Wing Saber into "Sonic Wing Mode", with the aerial ace forming a new winged backpack and chestplate for Optimus, and providing him with new hand-held sword weapons and firing missile launchers that connect to his Super Mode boots. The nature of the combination means that the two partners cannot combine with Prime at once—at least, not without physically removing one of Prime's own arms.
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
Legends Class Optimus Prime is based on his original Generation 1 appearance. He features a fake grill for his robot mode, and his large legs result in a fairly thick and compact truck bed. He is part of "Reveal the Shield", a subline that outfits all its toys with rubsigns, and in this case, it's located on the left side of the truck/his left elbow.
This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
A Walmart exclusive set featuring a redeco of the first Cyberverse Commander Optimus Prime figure, featuring moderately brighter colors and paint, while his jetpack and rifles are now black, with the jetpack's wings having silver flames. He also lacks the flame pattern on top of his hood, and features different flame patterns on the sides of the hood.
Part of 9th wave of One-Step Changers, and the first of the Combiner Force subline, this Optimus Prime is yet another new mold, with a different transformation scheme (a similar engineering to Age of Extinction's Bumblebee) consisting of pulling the switch on the back (do not hold the truck kibble when you transform him). Like most One-Step Changers, Optimus Prime features limited articulation on the shoulders, and features 5mm compatible hands.
We're sure we're not telling you anything you don't already know when we say that Hot Wheels are miniature die-cast cars with dynamic multi axular momentum technology (ie, they roll). They are usually based on real-life production cars but sometimes are modeled after bad acid trips, with wheels added later (for the rolling). Shortly after the introduction of the cars, Mattel launched various tracks to take full advantage of the cars' rollability.
If Optimus ordered his troops to attack the Decepticon base, they soon reached an area free of the anti-gravity beam’s influence. They were then attacked by a small fleet of Decepticons. Optimus targeted their squad leader, Dirge, knowing that by downing him, the Decepticons would be significantly demoralized. Dirge was forced to break-off his attack when his back-up was taken out, knowing he wouldn’t be able to take Optimus on without it. Losing their advantage quickly, the Decepticons retreated. But with the battle over, the Autobots noticed a small human boy at their feet. The boy was Buddy, a stowaway from the nearby town, and though Optimus was displeased with the tag-along, the Autobots could not spare the time to bring him home. Arriving at the Decepticon base, Megatron delivered an ultimatum; if the Autobots did not surrender Optimus Prime to the Decepticons immediately, he would use his gravity beam to have the nearby humans float off into space.
Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game. As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.
A black and red version of the First Edition deluxe Optimus Prime could be seen in the San Diego Comic-Con 2011 Transformers slide show, inside a mock-up of the wearable Matrix of Leadership package done for the convention that year. This figure was presumably a test-shot, as it seems to share plastic colors with Generations Sky Shadow (who was, coincidentally, first revealed at that same Comic-Con).
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
Prime filled one of the chase figure slots for the tenth wave as well. This rare figure was the same as the regular Super Mode PVC, except instead of wielding his Convoy Gun, Prime was armed with the Star Saber sword. As with the previous chase figure, it could only be found in one out of every ten cases, and took the place of the full-colour Prime figure in that assortment.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
The brand was yet to get its biggest revitalization, though. In 2007, Paramount Pictures released a high-budget live-action movie. Though many long-time fans resented the changes in style and story that the movie brought forth, it performed incredibly well at the box office and launched the brand into the public eye all over the world. Now, everyone recognized the concept of alien robots disguised as cars, and everyone associated the concept with the name: Transformers.
Part of the first wave of Beast Hunters Series 3 Voyager Class toys, Optimus Prime is functionally an upsized copy of his Beast Hunters Series 3 Cyberverse toy, though with certain sculpted details based on his larger toys, the replacement of his ball joints with more robust ratchet joints, the addition of thigh swivels, and various deco differences. As a result, his complexity is lower than in his previous Voyager Class toys, but he ends up being much, much more massive.
A Deluxe sized version of Energon Optimus Prime. Looks like a smaller version of the Leader class toy, without any trailer or drones. Can Powerlinx with other Energon Autobot toys. This toy was a Toys-R-Us store exclusive in the U.S. and was packaged together with a downsized Energon Megatron. In Japan this toy was packaged together with Kicker and a Star Saber accessory.
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
The styling is a little blocky, but these are toys aimed at a younger audience that actually wants to play with their Transformers. They don’t need 45 step transformations that result in perfect representations of what they see on screen. They want something that they can switch quickly between modes and that have added play potential, with power-up engines that unlock special features.
Toymaker Fischer Price was the knight in shining armor on this one with the creation of their Power Wheels line. At first, Power Wheels vehicles were very basic with small electric motors and rudimentary Jeep-like styling. Now, Fischer Price has unleashed a car that says "When I grow up, I want to be too rich to care about the environment." This giant bastard comes with tinted windows, a set of dubs and even a fully functional FM transmitter which, no doubt, blasts shitty radio static through its real-live rear subwoofers.
This incarnation of Optimus Prime first appeared in the Transformers: Universe comic series in issue #2. As part of Omega Prime, he was escaping with various other Transformers from Unicron. He appeared again at the end of issue #3, brought in to Alpha Trion's lab to aid Optimus Primal. After this, both Prime and Magnus became part of Optimus Primal's army of Autobots, battling against Unicron's Decepticons.
We know that despite starting his fictional life as a lovable, horn-headed robot who could turn into a Volkswagen in Generation 1, Bumblebee's most well-known these days as a round-headed robot who turns into a Camaro. In fact, younger viewers might not even realize he was ever anything but the Chevy muscle car. But there’s one quirky continuity where he’s able to switch between original and movie modes at will.
The project was crowd-funded through Japanese crowd-funding site Makuake. For 5,400 yen, contributors received an INFOBAR Optimus Prime, or for 16,200 yen, received INFOBAR Optimus Prime, INFOBAR Megatron and INFOBAR Bumblebee, the only way to obtain the last two items. The project received one million yen in the first 24 hours, ultimately topping out at over 32 million yen.
Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
The Autobots tracked SARA's energy signature to a decrepit old building. While a team headed by Jazz stormed the building's main floor as a distraction, Optimus, Hot Rodimus and Brawl infiltrated its basement covertly. Coming upon the Decepticons' inner sanctum, they found Megatron having already wired SARA into his own body! Horrified by this development, Optimus demanded to know what Megatron was planning to do. The true extent of Megatron's megalomania was then revealed; the Decepticon leader planned to use SARA's energy to become ruler of all space-time, even if it meant destroying his home dimension in the process. Both Hot Rodimus and Brawn were knocked aside by Megatron in short order, leaving Optimus with no back-up and few options. Deciding he needed to take down Megatron, even at the cost of his own life, Optimus transformed to vehicle mode and rammed the Decepticon. He then lost consciousness...
GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
Optimus includes an spring-loaded missile firing "ion cannon" modeled after Megatron's shotgun from Dark of the Moon, with the missile features a sculpted shotgun nozzle on the front section. It can be held in his hand or attached to the top of the truck cab or truck bed via 5mm post, and, in an unadvertised feature, sports tabs on the rear-most handle that allow the Dark of the Moon Voyager Class Megatron toy to wield it. Also undocumented is the fact that the weapon can be stored under either of Optimus' shoulders.
Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
Each arm features flip-out blades that trigger when a button on the forearm is pressed. Each of these blades has a Cyberglyphic symbol on it. The blades severely restrict Prime's arm articulation when retracted, as they get in the way of the kibble, but as there is very little one can do with Prime's arms without causing the blades to deploy, this is hardly noticeable.
Part of the first wave of Bot Shots Series 1 single-packs, Optimus Prime is a teeny little long-nosed semi truck with "trailer", with a spring-loaded automatic transformation to robot mode triggered when his front bumper is pressed. He has a "spinner" in his chest that shows his three attack types and power levels. His truck mode and robot body are influenced by the live-action Optimus Prime, while his head is taken from the original. His blue paint is light and sparkly-metallic, his red paint is dull matte, and his optics are yellow.
The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
This mold was redecoed by Takara in 2000 as Car Robots Black Convoy. The following year, it was released by Hasbro as Black Convoy's 2001 Robots in Disguise franchise counterpart, Scourge, with retooled discs that lacked the Autobot insignia. Following this, the next use of the mold was planned to be Universe Toxitron, which ended up being canceled. The modified tooling was also used when Laser Prime was reissued by Takara in 2006 with a modified deco (see below), and for the e-Hobby exclusive Laser Ultra Magnus that accompanied the reissue's release. In 2015, Platinum Edition Year of the Goat Optimus Prime, another repaint version, comes with partially transparent plastic torso.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added. Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film. In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10. In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.
In the movie, he starts out as a 1976 Camaro before modernizing himself. But the 2007 version (the fifth generation of the model) was a concept car-- you couldn’t even buy a new Camaro until 2009. They later switched to the production version for the 2009 sequel Revenge of the Fallen and he was yet another updated model for Dark of the Moon in 2011 (the SS model). In Age of Extinction, he appears both as a 1967 model and another new model of the current version. Finally, back in June, Bay tweeted that in next year’s The Last Knight, Bee would be a custom-built 2016 Camaro. Over the first two years of the relaunch, Chevy sold an astounding 140,000 Camaros and saw a 10% spike in the yellow model, thanks largely to our friend Bumblebee.