Prime is armed with a spring-loaded missile launcher that stores on the rear of his truck mode (which becomes the backpack of his robot mode) when not in use. Like most of the weapons of the Energon line, it sports a 5mm post, allowing it to be held by most every Enegon figure, to combine with assorted other weapons and Energon weapons released in the series, and to peg into numerous compatible ports shared by many figures, like the hole in the radar of Prime's own trailer, or even conveniently placed 5mm screw holes like those of the Prime Force.
Following our last article on in hand images of Studio Series 38 Voyager Class Optimus Prime (from the Bumblebee film), TonTon Reviews (who put up the in hand images), has come through on what they said and posted their review! This review allows us to get the best look at the toy yet, as well as its surprisingly complex transformation. We see the ion blaster included stores between his legs in truck mode to fill in the gap and hold it togethyer. The backpack in robot mode also has 5mm - Read More
Came with the Mini-Con Sparkplug. Could combine with Armada Jetfire (and its repaints) and/or Armada Overload (and its repaints). The trailer could convert into a base for Mini-Cons. In Japan a gold chrome edition of this toy was released as a Lucky Draw special. With its trailer the vehicle mode of this toy bears a great resemblance to G1 Star Convoy. According to the Armada video game Armada Optimus Prime is supposed to be 22 feet 10 inches tall (696 cm tall) and the toy is 17.5 cm tall. So that's a scale of 1:40.[55]
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
Available exclusively from Japanese clothing company A Bathing Ape in 2017, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique black color scheme matching the Convoy Reissue BAPE Ver. BLACK of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
Another redeco of Deluxe-Class Dark of the Moon Prime, this release uses a darker grey, a less magenta-y red, and less gold on the front end. Included is the trailer originally available with the Chronicle release. The trailer holds up to seven MechTech or similar 5mm peg accessories. Four holes are located on the top-front end of the trailer, with another three inside. The door also folds down to become a ramp, and the inside of the trailer is big enough for several Legion or Commander Cyberverse toys, or one smaller-end Deluxe figure. Two C joint bars also run along the bottom of both sides.

In a world where the Transformers' war settled into a series of friendly competitive races known as the Transformers GT, Optimus Prime became the GT Transformer known as GT-R Prime. As a racer he was known for his serious but sometimes hot-blooded personality and his skillful use of the Impact Wrench Gun, though he maintained an honorable policy never to fire directly at an opposing racer's body. Like other racers, GT-R Prime put a limit on his own strength by separating his Matrix into a GT Sister, creating his partner Misaki.

China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More

He resembles previous Optimus characters in robot mode: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.


By the ‘90s, the genre had begun to fade, and boys' minds turned to more high-impact action, often centered around mutants, monsters, and karate. Hasbro saw potential in the embers of the Transformers brand, and turned it over to newly-acquired subsidiary Kenner for a jump-start. Kenner threw out all the old rules, and invented a line of Transformers that were more poseable, more feature-packed, and more exciting. Backed by a high-tech CGI cartoon, Beast Wars turned the brand around, making Transformers a bestseller again.
Part of TakaraTomy's Movie Advanced Series lineup, Revenge Optimus Prime is redeco of the 2010 Transformers Battle Blades mold, featuring darker plastic, a pair of flip-out swords (the first release of this mold) from the Hasbro release, and chromed fuel tank-guns & sun visors. His shins & wheel joints are bronze from the Hasbro release as opposed to the grey of Takara's Autobot Alliance release.
Though Prime's ultimate fate is unknown, in a story entitled "The Last Days of Optimus Prime", also from Transforce, Prime laments the new Transformers age without war and passes on to a Transformers afterlife, referred to as "J'nwan". The story is vague, however, and may be a metaphor for Prime rejoining the Matrix, as his time had come. In this realm, he was approached by the Predacon Sandstorm, who tried to plead for the help of Prime and the other legendary Transformers in dealing with a Unicron/Predacon hybrid named Shokaract. Prime refused, but later led a group of Transformers, including Megatron, Grimlock, and Soundwave), to distract the creature while Primus dealt the final blow.
When Ultra Magnus, Rodimus, Arcee, and Spike took cover within the Autobot Mausoleum, retreating from an attack led by Galvatron, they found Optimus having risen from the dead! Rodimus returned the Matrix of Leadership to Optimus, only for Optimus to abandon his Autobots, and flee back to Cybertron. Optimus, it seems, has returned to the world of the living changed. Once on Cybertron, Optimus orders a full-scale assault on the Quintesson base. Thankfully, Optimus managed to come to his senses when his memories of being revived by the Quintessons reemerged. After returning the Matrix to Hot Rod and ordering the Autobots to retreat, sacrificed himself once more by guiding the ship he's piloting into the Quintesson's trap. Dark Awakening
In the wake of this incident, the transformers managed to reclaim much of Cybertron. Mindful of the dangers of allowing humans like Cobra access Cybertronian technology, Prime sent Perceptor, Grimlock, Arcee, and Bumblebee on a mission to Earth. As it turned out, Prime's fears were well founded. The U.S. government had used parts from Megatron to create Serpent O.R., a cyborg designed to be a perfect weapon. A raid by Cobra allowed it to escape and gather an army of Decepticons on Cybertron, killing Bumblebee in the process. Despite the grief of losing Bumblebee, Prime continued on and rallied his comrades to do the same. Attacking the Autobot capital city, Serpentor's forces proved overwhelming, and Prime surrendered to ensure the Decepticons would cease fire and not kill another comrade. Realizing that Serpentor wanted the Autobot Matrix of Leadership, Prime broke free as Serpentor was distracted, but was unable to kill him. He was promptly attacked and nearly beaten to death by Razorclaw and Motormaster. He was subsequently forced to watch as Serpentor opened the Matrix. In doing so, Serpentor was not only reformatted into a transformer-like mechanoid, but was also shown the futility of the fighting by the Matrix. At this point, Cobra Commander was able to take control of Serpentor's body. In an attempt to stop him, Hawk opened the Matrix and was transformed into a great leader, rendering Cobra Commander comatose. As the Joes prepared to head home, Prime promised to record the Hawk-led humans' future.
The internet can be blamed for the size and scope of the secondary LEGO market. On the website, BrickLink, you can find almost any set that LEGO has ever produced. In addition, the site keeps records of trends in the market and value of individual pieces. This site is invaluable to a LEGO collector and has given many the ability to grow their collections. Before the advent of this site and sites like eBay, collecting LEGO required going to garage sales. There are now whole sites dedicated to buying LEGO as an investment, but that is a topic for another article.
During the three-part "One Shall Rise", Optimus uses the Matrix of Leadership to defeat Unicron. Unfortunately, in doing so, he not only emptied the wisdom of the Primes, but lost his own memories as a Prime, believing himself to be Orion Pax once again. Megatron took advantage of this to manipulate Orion into deciphering Iacon records the Decepticons have stolen from Cybertron. Eventually, Orion figures out the truth and escapes. Jack is later able to restore Optimus' memories after downloading the wisdom of the Primes from Vector Sigma into its key which Optimus gave him before he left to stop Unicron. However, Optimus could not recall the time he spend as a Decepticon.
In the forest, Trailer observed the lost Red Jet and Yellow Sports Car. He wondered why Red Jet didn't just fly out. The Story of the Lost Plane! Trailer later played in the Quiz! BeCool show with Tank Lorry on his team. The two's answer fumbling and arguments led them to lose the game. Another BeCool, Garbage Truck (清掃車 Seisōsha), was part of one question. The Story of Quiz! BeCool While Yellow Sports Car was explaining BeCool marks to you, Trailer was asleep in his Trailer Base, appropriately displaying his "Zzz..." BeCool mark. The Story of What Do I Know About the BeCool Mark?
Optimus Prime narrated the events of what happened before the Ark crashed on Earth. He became the new leader of a long line of Autobot leaders via the discovery of the Matrix. On their quest for more Energon, the Autobots were chased by Decepticons to the planet known as Earth and crashed on it. When they emerged from the Ark, Optimus Prime scanned his truck altmode, stating that the war would not end on Earth. Action Blast 1
In the first nexus, when Swoop reported back to Autobot HQ that the other Dinobots were being controlled by Bombshell's cerebro-shells, Optimus had to decide whether to stop them with an immediate full-scale assault, or consult the Ark's computer. If he led an immediate attack, the cerebro-shells were jolted loose when his troops carried out his order to, "Bring them down fast and hard". If he consulted the computer, he then had to choose between its plan to have Windcharger remove the shells from a distance with his magnetic powers, or go with Mirage's idea to lure the Dinobots over Bandit's Bluff with an Optimus Prime hologram. If he chose Mirage's plan, the Dinobots charged over the cliff and into the ocean, where they were salvaged for repairs back at base. If he let Windcharger lead operations at the bluff so he could confer with Skids about some strange activity near Dolphin's Bay, it was out of his hands whether Windcharger accidentally tore the Dinobots to bits, or harmlessly removed the cerebro-shells. The latter outcome led to Grimlock telling Optimus that Bombshell said controlling them was just part of a larger plan, and the Autobot leader realized that it might tie in to Skids's report. Skids and Bumblebee could investigate in Wheeljack's new mini-sub, but should he send Sludge along with them?

Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[8] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[9]

In robot mode he resembles previous Optimus characters: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Legion Class Optimus Prime has been found at Family Dollar and Dollar General stores in the United States. A later variant repleaced the red Autobot insignia with a black version. This later version was also released at general retail in Australia, New Zealand, Europe, and Russia. In Singapore it was released together with Bumblebee and Starscream as part of the promotion for Age of Extinction in selected cinemas.
Optimus Prime appears near the end of the Decepticon Campaign. Sam and Mikaela inform Optimus that all the Autobots were defeated by the Decepticons. Optimus proclaims that they sacrificed their lives to protect the Allspark, and their sacrifice will not be in vain. Leaving Sam and Mikaela in a safe place, Optimus faces Megatron, but is defeated. Weakened and damaged, Optimus crawls to reach the Allspark. However, Megatron attacks Optimus with his chain-flail, killing him.
When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1

I agree with Aidan but would expand on his point. It’s not just that the sets seemed bigger; they were. As the relative complexity of sets has increased, so too has the piece count, but there has been an overall decline in the size of the models due to increased build complexity and a corresponding reduction in size of the pieces required to create such detail. The negative affect on perceived value in this is apparent, though I would argue, misguided when one considers the build quality and detail of new and recent sets.
The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.
In addition to the small engine-pistol of his Alternators figure, Prime comes with the "Surfblade", a pink surfboard that can be reconfigured into either two small knives or a large double-bladed sword. As with all the Kiss Players figures, Prime also comes with a PVC figurine of a cute girl: in this case, Marissa Faireborn, who can perch upon his shoulder or sit in his driver's seat, and comes with two pairs of interchangeable arms and legs. Additionally, the set includes a CD featuring the first five episodes of the Kiss Players radio drama, as well as the exclusive bonus audio adventure, "Someday, Under the Sun."
Upon discovering that the Matrix was the key to destroying Unicron, Optimus Prime and Ultra Magnus went alone to face Unicron while the rest of the Autobots executed the plan to restore the original timeline. They hoped that at least one of these plans would be successful. Prime was injured in the confrontation with Unicron and, although his injuries were not mortal, he passed the Matrix to Magnus, who shed his outer armor and managed to complete the mission, destroying Unicron.
Millions of years later, Optimus was one of the thirty-five Autobots rebuilt into modern machines by the ship"s computer. Some time later, Jazz reported that he had spotted Decepticon activity at a nearby construction site. Optimus decided to take a proactive angle to their war with the Decepticons, and led the entirety of his troops to the Decepticon base. Once there, they found themselves allowed in by Megatron, feigning a friendly demeanor. Not fooled by Megatron's claims that he was making an honest living heading a construction company, Optimus engaged the evil robots in combat, before being blasted out of the Decepticon base. Optimus and his troops were sent tumbling down the cliffside beneath their feet. The Autobots suffered only minor damage from the fall, and after getting patched up, moved out once more to stop Megatron's plan, now well under way. Megatron was holding millions of humans hostage in a bid to get the Earth to surrender unconditionally to the Decepticons.

Part of a cross-promotion between Toyota and TakaraTomy, the deluxe-sized FJ Optimus Prime transforms into an FJ Cruiser, with his axe weapon becoming the vehicle's spare tire. The vehicle mode's body panels come packaged on the sprue, and can then be clipped onto the core figure. The mass retail release of FJ Optimus includes yellow and white panels, whilst further color variations were available when purchasing an FJ Cruiser at Japanese Toyota dealerships. As is typical of TakaraTomy exclusives, these variants came in grayscale packaging.
Hybrid Style Optimus Prime is an insanely detailed and complex transforming toy, created under the supervision of famed mecha designer Shōji Kawamori. Standing only three and three-quarter inches tall in robot mode, the figure is partially constructed from die-cast metal and features one of the most complex transformation sequences ever seen on a Transformers figure of its size. Alas, the small size of the figure also works against it, as it required several design concessions that resulted in (if we're being nice about it) an unimpressive cab mode.

The original Hasbro stock photos depict him as having red paint operations on his kneecaps and the sunken ridges around his blue abs that the final product lacks. The photos on the cardback show him with a red Autobot symbol on his truck door and blue plastic instead of grey for the piece just in front of his rear tires. The back photo also depicts his side windows as being the same translucent orange as the front ones, when they are, in reality, a garish solid orange.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
This. Is. Awesome. I remember running LEGO piece auctions ~1998/99 on RTL (rec.toys.lego) then later my own website. I’d buy sets at Walmart and other places on discount, break them out, and sell the pieces as lots. I knew I’d always make good money if I could average < $0.10/piece cost (ideally around $0.07) and sell for $0.15 – $0.20+ … fun times!
Optimus and Wheeljack returned to Autobot HQ after an absence to find Grimlock had taken leadership. Though they failed to resist him, he soon bored with leading the Autobots and let Optimus take command again. Me, Grimlock, King Impressed with Bumblebee's success as team leader, Optimus assigned Pipes to lead a team. The B-Team Part Deux With Optimus badly damaged and without the Matrix, the Autobots were driven off Earth and sought refuge on Cybertron. Once Optimus had recovered, he put together a team which returned to Earth and retook it from the Decepticons, with Optimus badly damaging Megatron in combat. All Hail Megatron
While Transformers ended poorly for the US market, the same can not be said for the UK, Canada, and Japan markets as they went on to produce their own continuing series between 1991 and 1993, despite the UK market in particular missing a substantial amount of figures prominent in the comics and animated series throughout the line's run. Each country produced their own continuity. The UK and Canada continued with new Action Master figures and introduced the Turbo Masters and Predators. Japan continued with the Micromasters concept.

The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of opening chest windows. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on his shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.
Part of the first wave of Prime: Beast Hunters Series 3 Cyberverse Commander Class toys, Optimus Prime is an all-new mold. He now transforms into a monstrous, flat-nosed truck with spiky fenders at the front and a cage compartment at the back, and comes with the Thunder Lance and Star Saber. Each of the weapons features two differently-placed 3mm posts, allowing them to be held by his hands, or mount onto two ports on the rear vehicle sides, as well as allowing the lance to additionally be used as a pressure-fired missile launcher.
Thanks to Hasbro on their official site, which can be accessed by clicking any of the images below, we have news of 2 new members of the Energon Igniters class of figures, along with new images of 3 more! Up first, we have the 2 new reveals: Power Plus Soundwave and Ironhide! Soundwave looks a lot like he did in the movie, with a G1-esque robot mode, and a new van mode that is very Animated-esque, complete with a totally metal image of a jaguar and bird of prey on the side, evoking - Read More

2. Piece diversity: Today the total range of piece types and the number of new piece types introduced every year has skyrocketed since the decade of the 80s. As a kid, the new pieces introduced every year were indeed one of the great answers to my parents’ pleas of “don’t you already have ENOUGH Legos?!?!” However, the quantity of new piece types again coupled with the broad color diversity again requires much more Lego to be purchased to attain that “critical mass”.
During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
In the animated series, Optimus Prime was originally in the Autobot Academy and friends with Sentinel Prime and Elita One. When Elita is lost on a planet dominated by giant spider-like aliens, he blames himself for leaving her behind, where she supposedly dies in the explosion of a wrecked Decepticon warship loaded with Energon. Sentinel doesn't forgive him for losing her and Optimus takes full responsibly for Elita's demise. This caused Optimus Prime to wash out of the Autobot Academy. However, Ultra Magnus pulls some strings so that Optimus Prime could be captain of a strange Space Bridge repair crew composed of a war vet named Ratchet, a fledgling cadet named Bumblebee, and his fellow cadet Bulkhead. Optimus is given command of the starship which is the vehicle mode of Omega Supreme.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
Released as part of The blindpacked EZ Collection Real by TakaraTomy's "TakaraTomy A.R.T.S", this Optimus Prime is an extensive redeco of the Revenge of the Fallen Legends Class figure, sharing the same paint mask with the Battle Damaged figure sans the weathering. Like all land-based vehicles in this line, He also features an extra paint applications on the wheels rims. This redeco also uses the slightly small fuel tank/elbow tabs.
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.

It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.


A limited edition of the Optimus Prime toy sold as a mail-away exclusive by PepsiCo was made available in North America in 1985. This version of the figure came with a small fold-out leaflet glued to the top-right of the packaging, which contained two Pepsi logo stickers for the buyer to attach to Prime, mid-way through the traditional silver-and-blue stripe on his trailer. Canada also got a version of this promotional figure, but with much larger stickers that were the full length and height of the trailer. This promotion would go on to serve as the inspiration for the Japanese character of Pepsi Convoy, who would in turn be released by Hasbro as a new "Pepsi Optimus Prime" in 2007.
×