Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
The Transformers Energon figure pen is based on Optimus Prime in his standard Energon body. About the size of a scout class toy, he transforms from truck mode to robot mode almost identically to his mainline toys, apart from the fact that his feet contain the pen and cannot bend. It's really hard to write with, and almost impossible to pose, even though it has full arm articulation. Amusingly, this figure can position itself to transform into his super robot mode (by flipping his helmet on, opening his chest and flipping his hands in), but because there are no versions of the Prime Force drones in this scale, it's impossible to complete him.

In the final episode of Transformers: Cybertron, Optimus Prime proposed a new Space Bridge project using the power of the four Cyber Planet Keys and the four great Cybertronian ships. Many Autobots and former Decepticons joined in the project. Jetfire was left in charge of Cybertron as Optimus Prime led the Atlantis with the Earth Cyber Planet Key, joined by Red Alert, Safeguard, Scattorshot, Leobreaker, Menasor, and Heavy Load.
When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1
In the animated series, Optimus is able to fire short-range optic blasts, project holographic maps, and deploy hydro-foils, designed by Wheeljack, to traverse bodies of water with ease. In the animated series, Optimus was also given the ability to retract his right hand unit and replace it with a glowing axe.[7] Across the assorted continuities of the original Transformers universe, there have been various interpretations of Optimus Prime. One of Prime's most notable characteristics over all continuities his unswaying commitment to leadership by example. The animated series's version of Optimus Prime is depicted as a straightforward, wise, and upbeat battlefield general. Additionally, the animated series's version of Optimus dislikes rap music, putting him at odds with music-loving characters like Blaster and Jazz. In the Marvel Comics series, in addition to these characteristics, Prime is secretly plagued by self-doubt and a conflicted sense of pacifism that often makes him an extremely reluctant warrior.
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
Classics Optimus Prime was initially intended to be Deluxe-sized. An alleged list of the tentative Classics line-up[20] included a Deluxe-sized Optimus Prime without a trailer and a version with a trailer at the Voyager price point; however, it appears the decision was eventually made to upscale Optimus to Voyager size instead.[21] Don Figueroa's control drawings for the Deluxe version were leaked before the Classics line was even released at retail.[22] A gray model prototype was later shown as part of an interview with TakaraTomy's staff in Transformers Generations 2009 vol. 1.[23] It's unclear whether the trailer ever made it past the early planning stage before the size of the figure was changed.
Smallest Transforming Prime was redecoed the following year for the second wave of the line, into a color scheme based on his Generation 1 cartoon appearance featuring brighter reds and blues, white thighs, yellow details on his bumper, and blue eyes and windows. This version of the figure was made available for a second time in the next wave ("Wave 2.5"), with a new anime-decorated version of the Combat Deck now available as a rare "chase" figure.
After a long period of stalemate, Prime grew frustrated at the lack of progress his troops were making against Megatron's forces. To remedy the situation, he ordered the creation of several new Transformers who would be perfectly adapted for combat on Earth. The first among these was Pirhana. Piranha's The Official Transformers: Generation 2 Annual profile But one of the Autobots' great victories came not through superior numbers or firepower, but trickery and cunning. As part of a plan devised by Optimus Prime's new second-in-command Prowl, the Autobots allowed Starscream to "overhear" that they had uncovered an ancient Cybertronian ship with the means to return to Cybertron. They then stationed themselves around the vessel, atop of Table Mountain in Africa, and awaited the inevitable Decepticon attack over its possession. Optimus met Megatron in battle, but ordered his troops to withdraw after a brief skirmish, declaring the Decepticons too powerful to hold back. Once the Decepticons claimed their prized and entered the ship, they found themselves locked inside it. The ship then shot up away from the planet, leaving the Decepticons without the means to control it. Though the Autobots knew this wouldn't rid them permanently of the Decepticons, they were satisfied with a brief period of calm while they were off-world. Day of the Decepticons
This TakaraTomy Asian market-exclusive Leader Class two-pack consists of a redecoed Jetfire and a slightly altered Buster Optimus Prime. Buster Optimus Prime is almost identical to the single-pack Japanese release of the toy, but unlike the standalone Buster Prime, has a head with a faceplate, itself containing more paint details than the first release of Revenge of the Fallen Leader-class Optimus Prime. The flames are outlined with light blue instead of white for accuracy to the physical truck prop (though it ends up being inaccurate in robot mode). Jetfire has a subtle, more movie-accurate colour scheme.
A large, non-transforming toy that features light & sound effects and voice tracks by Peter Cullen. The figure itself is a representation of Optimus Prime combined with Jetfire's parts - only designed for younger children. A lever on his waist extends his wings, and flying sounds are emitted when he is moved around off the ground. The Power Bots line replaces the 2007 Cyber Stompin' line of the first film.
He comes with a MechTech rifle converts into a large battle axe, and can be locked in by pulling the lever all the way in and tilting it into a gap to the left. The rifle has a separate flip-out handle, while the axe uses the rifle's long barrel as the handle, meaning that Optimus can grip the axe with both of his hands. This weapon was also retooled in a running change, adding a stop to the handle instead of relying solely on the gear system to prevent the locking assembly from flying off into parts unknown.

Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[50] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
With Season One of Cyberverse drawn to a close, we have word of a newly-listed Cyberverse DVD currently available for pre-order. Titled ‘Transformers Cyberverse: The Journey’, the anthology consists of 66 minutes of product, which can only be assumed to consist of the first six episodes, given the DVD’s plot synopsis and the title of the collection corresponding to the show’s fourth episode, ‘The Journey’. The DVD itself is listed here by New Zealand based online retailer - Read More
Another release of the Leader Class Optimus Prime figure, now redecoed from the original Revenge of the Fallen Leader Class mold, but with the gimmick-less arms from the Supreme Class retool, and a pair of articulated fingers which was not previously used for the original release. He also retains his pair of Energon Swords and Hooks, and his Knuckle piece. He also retains the fuel tanks that can combine to form his ion blaster. In terms of deco, he features a darker plastic color and paint (which resulted in a two-tone shades of silver & gunmetal), which is meant to go with this line's Jetfire.
Both Jet Power Optimus Prime and the accompanying redeco of Voyager-Class Revenge of the Fallen Megatron would have come with an issue of the Unite for the Universe comic book, but due to the cancellation of both figures, the comics were eventually included with the Movie Masterpiece releases of Leader-Class Starscream and Bumblebee. Of amusement is the fact the comics are essentially showcasing toys that have been canceled.
The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.

The Autobots and the Decepticons came to a distant world in the grip of an ice age. Assuming alternate modes based upon the dominant (though doomed) indigenous creatures of this planet, they continued their ancient, unending war. However, the Autobots, with their energy levels dangerously low, withdrew from combat as the world grew colder. They sought refuge in a deep cavern and entered stasis lock, awaiting the day when surface conditions changed to better suit their operation. Hearts of Steel #1 Optimus lay under the Mare Rurek Glacier. Infestation 2: The Transformers #1 Millions of years later, Bumblebee was awoken by the hammering of humans working on a rail line. He briefly considered awakening Optimus Prime, but thought better of it. After discovering the world had changed significantly, Ratchet thought there was no reason to awaken Prime. Hearts of Steel #1 When Bumblebee discovered the Decepticons were once again active on this world, Ratchet and Prowl agreed that the Autobots must intervene, but again decided out of rousing Optimus from his slumber. Hearts of Steel #2
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Originally, Optimus Prime was created as the leader of the Autobots, though it is unknown how he was created or his origins. In a possible future, Megatron was threatened by the existence of the Aerialbots and had Shockwave build a time machine to send them back in time to get rid of them. However, he only ended up changing history for the better. In the revised timeline, Optimus Prime began his life as a robot named Orion Pax, a mostly defenseless dock worker during the Golden Age of Cybertron nine million years ago, with a girlfriend named Ariel and a best friend named Dion. During this time, a new breed of robot with new flight capabilities appeared on the planet that Orion idolized. When Megatron, the leader of the new group of robots, approached him with inquiries about using one of the dock warehouses, Orion was swayed by Megatron. Both Orion and Ariel were severely wounded when Megatron and his forces attacked in order to claim the energy stored there. Searching for someone to help them, the time-displaced Aerialbots took Orion and Ariel to the ancient Autobot, Alpha Trion, who used them as the first subjects for the new reconstruction process he had developed involving rebuilding the frail Autobot frames into more battle-hardy configurations.
×