Prime: First Edition Matrix of Leadership Optimus Prime converts from robot mode to his truck mode. He comes with a gun than he can wield with his hands, as well as peg onto his hitch in vehicle mode, with different pegs for either configuration. Similar to a previous Optimus Prime toy, he features some faux-kibble in the form of his actual windshield chest being covered by sculpted panels featuring his characteristic windshield-chest. His arms are slightly longer than his original design's arms.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[8] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[9]
Epic Optimus Prime is a 22 inches tall, non-transforming Optimus Prime figure, featuring limited articulation in the waist, shoulders and wrists. His chest can be opened to reveal a command center with a seat and room to display at least three figures. His arms also feature one seat each to accommodate more figurines. The back of his arms and legs are hollow with "shelves" that allow even more figurines to be displayed.
A redeco of of the Cyber Commander toy above, this Prime features grey plastic replacing the original blue, some deco differences on the arms, body & legs. He also features a flame tampograph on the sides of his vehicle front. He comes in an altered packaging that replaces the first version's painted prototype stock photos with CG renders depicting the new deco, and also features a new Hasbro product code number, thus making him officially a separate product rather than a drastic running change variant.
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.

The conclusion to the storyline was forestalled when Hasbro retracted 3H Enterprise's license, but an explanation can be found in issue 8 of the Transformers Collectors Club magazine, Cybertron/Robots in Disguise. In this issue, Prime tells the tale of how Unicron's forces were defeated in the last battle by Optimus Primal's forces and Unicron disappeared into the black hole opened in Transformers: Energon. Combined as Omega Prime, they could not escape fast enough, and were sucked into another dimension.
1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.
Optimus Prime is another redeco of Revenge of the Fallen Legends Class Optimus Prime, features gunmetal-stque grey plastic, and his paint operations being similar to the first Revenge of the Fallen Legends Class toy. He is also packaged with Grimlock, himself a redeco of none other than Energon Cruellock. Like other Legion-themed product, he is exclusive to Walmart in the US and Asda in the UK.

The centerpiece of the power-up robot mode is Prime's gigantic Ultimax Super Cannon, an electronic light-and-sound weapon the size and mass of a Deluxe figure. The whole cannon attaches to a special socket slightly behind Prime's shoulders, can store on the back or flip over to be gripped in both fists in armor mode, or stored upside-down underneath the trailer in truck mode. When pointed forward, the cannon has a larger helmet styled after Prime's own with a large translucent face shield featuring a painted targeting system. The weapon has three electronic modes: each of two small buttons plays its own weapon-firing noise and flashes one set of lights, while the large pull-switch in the cannon's center plays the sounds of a powerful barrage, flashing both sets of lights and (every third time) finishing off with the declaration "I am Optimus Prime". The Ultimax Super Cannon also has two of its own 5mm ports for even more MechTech firepower. When mounted on his back, the Cannon has two hook-like sections that securely lock into the "backpack", allowing the Ultimax weapon to serve as a handle for Optimus' imaginary "flight" operations.
As part of the Robot Replicas line, this version of Optimus is a non-transforming action figure that utilizes Revoltech-style jointing. The sculpt hews much closer to the movie CGI model than is possible with the full transforming toys, plus the universal jointing of the line allows for his forearm to be replaced with his hand-cannon... or bits from other Robot Replicas.
Leaving his home universe, the Optimus Prime of Primax 895.0 Gamma was gathered in Axiom Nexus by its Optimus Prime, along with a roster of other Optimus Primes and their kin in a group known as the Convoy, in which he was redubbed "Hero Prime". Optimus Prime bio in Club magazine #49 A multiversal cataclysm in a universe seeded with Rarified Energon and an invasion by natives from the negative polarity universe had called them into action. Since Matrix bearers were usually never allowed into Axiom Nexus, this was a grave threat indeed! Invasion Prologue
Inspired by the 1985 promotional version of Optimus Prime that featured Pepsi stickers on his trailer, this outlandish incarnation of Prime is a slightly altered version of Takara's 2005 Pepsi Convoy figure (which represented a different character to Prime). The figure was only sold by Hasbro Toy Shop at various conventions, and given away as a promotional prize by Pepsi, via their Mountain Dew brand.
Ultra Magnus's legendary status was exceeded only by the legendary status of Optimus Prime. Combiner Wars Ultra Magnus toy bio Upgraded with the power of combination, Optimus could combine with any bots to form Ultra Prime. Combiner Wars Optimus Prime toy bio With mastery over the power of Combiners, the combined courage of Optimus and the Autobots would stop the Decepticon Combiners threatening cities and entire civilizations. Combiner Wars Battle Core Optimus Prime toy bio
Like the previous Prime, it is loaded with features, though it ditches the first movie's Automorphing for the new Mech Alive gimmick. When a grey tab on his midriff is pressed, Prime's entire pectoral region "flexes", lights in his chest and eyes glow, and he declares "I am Optimus Prime" in Peter Cullen's voice. For the European release of the figure, to get past the language barrier, the Cullen sound clip is abbreviated to just "Optimus Prime"; in some regions, including Quebec and the UK (but only after a month or two), both versions were made available. A transformation sound effect activates when his torso is transformed, and once Prime is in truck mode, an almost unnoticeable button (a small square located beside the screw for the battery compartment, undocumented in his instructions) is revealed, which activates engine-idling noises.
When IDW Publishing received the rights to the series, author Simon Furman was hired to oversee the line. Furman decided that the Generation 1 continuity "was in need of ... a contemporary restart"[15] so that the comic could retain a modern audience. Furman's revised continuity establishes Optimus Prime as the present-day leader of an Autobot army spread across the galaxy in small units, waging a covert war against teams of Decepticon infiltrators over resource-rich worlds. The Stormbringer miniseries explains that the Transformer homeworld of Cybertron is a dead planet, ravaged by an ancient cataclysm caused by the Autobot-Decepticon War. Prime had been forced to ally with his arch-rival Megatron to end the destruction. In the series, the interference of Jetfire and the Technobots, in a plot organized by the Decepticon Bludgeon, alerts Prime to the possibility that the Cybertronian cataclysm might be re-ignited and spread to other planets. Prime calls in the Wreckers, meeting them on the surface of Cybertron in time to witness the return of the being called Thunderwing, the focal point of the apocalypse. The combined efforts of Prime, the Wreckers, Jetfire, the Predacon-led Decepticons, and a unit of aging Centurion drones are barely enough to render Thunderwing inert.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
How to Say Expensive and Mean It - The Seibertron.com Twincast / Podcast reaches episode #213, and the discussion begins with Takara Tomy's upcoming Masterpiece MP-44 Optimus Prime version 3. This toy has a substantial price tag that has caused controversy amongst Transformers fans. In-hand impressions of Transformers Generations War for Cybertron: Siege figures come next, with analysis starting for Deluxe Class figures Sideswipe, Hound, Cog, and Skytread/Flywheels. After that, Micromasters from the Race Car, Battle, and Air Strike Patrols get a look. Weaponizers Lionizer, Blowpipe, and Firedrive come next before the Generations discussion concludes with Voyager Class Megatron and Optimus Prime. A look at the upcoming Generations Select releases of Ricochet and Red Swoop is followed by a quick examination of the recently released Transformers: Botbots lineup. The endings of the long-running IDW Transformers comics continuity comes next, with the end of event book Unicron occurring first. Optimus Prime's namesake series is talked about next before the comics discussion concludes with Lost Light's finale. Bragging Rights close out another episode with early holiday season sales driving the cast's recent purchases.

It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.

Unlike the stock photography, the actual toy doesn't feature a mouthplate. In October, : The two-pack was one of the three Evolution 2-packs available as a Toys"R"Us exclusive in Japan, with no changes on the figures with an exception of the packaging, which the front box features Japanese translated versions of the English text, and a sticker on the back confirming that this was a Japanese release. The robot mode stock photo lacks the gun nozzle/missile.

The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]


According to IDW Publishing's Transformers: Movie Prequel comic book, Optimus Prime and Megatron co-ruled Cybertron until Megatron began a war for control of the Allspark. Optimus formed the Autobots, a militia of civilian transformers sworn to protect the Allspark. Optimus fought back, willing to doom Cybertron itself to deny Megatron the Allspark. His reasoning was that a new homeworld could be rebuilt with the Allspark once Megatron was no longer a threat. He entrusted Bumblebee with the task of distracting Megatron at Tyger Pax long enough for the Allspark to be sent into space.
Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. Unlike in all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.

This straight reissue of the original Optimus Prime figure was released in Hasbro's European markets in the early 1990s, at the same time as many other Generation 1 figures were being re-released as "Classics". Oddly, although he shares their golden packaging, Prime is not actually identified as a "Classics" figure anywhere on his box, but is generally considered to be part of the sub-line for simplicity's sake.
Prime: First Edition Matrix of Leadership Optimus Prime converts from robot mode to his truck mode. He comes with a gun than he can wield with his hands, as well as peg onto his hitch in vehicle mode, with different pegs for either configuration. Similar to a previous Optimus Prime toy, he features some faux-kibble in the form of his actual windshield chest being covered by sculpted panels featuring his characteristic windshield-chest. His arms are slightly longer than his original design's arms.
Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
As with other Dark of the Moon Activators toys, this Optimus Prime (released under the Robo Power subline) is a very simple one-step transformation toy. You simply slam him down on the big blue button on the back end of his truck mode and he transforms thanks to spring-loaded mechanisms. To transform him back, just slam him down again on the same blue button.

Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
When the long-lost Titan Masters reemerged into modern society and joined the Autobot-Decepticon war, Optimus Prime was partnered with the Titan Master Apex, who carried a portion of Prime's spark, boosting the legendary commander's already formidable abilities. Titans Return Apex/Powermaster Optimus Prime toy bio On Velocitron, Optimus Prime was present for the biggest race of the year when Scourge and Crashbash arrived and attempted to botnap Hyperfire. Optimus ordered Sentinel Prime and Hardhead to battle against them. Later, Optimus was part of a battle on Cybertron against Soundwave. During the battle, the Autobots' base Fortress Maximus transformed to thwart the Decepticon advance. Optimus Prime declared that to defeat the Decepticons, the Autobots would need to master the power of the Titan Masters. Titans Return: The Power of the Titan Masters
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.
Eject lamented that all the great and famous Cybertronians, including Optimus Prime, were long gone by the time Cybertron was controlled by the Builder Assembly. Broken Windshields The Maximal Overshoot experienced a series of visions from Cybertron's past after discovering the Oracle, including Optimus Prime launching the Ark during the Great War. Cultural Appropriation
For Transformers: Age of Extinction, Optimus Prime initially transforms into a rusty 1973 Marmon semi cab-over truck and later on a new alternate mode in a blue and red Western Star 5700 Custom semi-truck.[31][32] After humanity turns on all Transformers, regardless of faction, Optimus and the other Autobots go into hiding. Eventually, they find themselves being hunted by a rogue organization called Cemetery Wind. Optimus is severely injured in a trap set by the group, while many of the other Autobots, including Ratchet and Leadfoot, are slain. An inventor, Cade Yeager, comes to Prime's aid and helps restore his health. After uniting with a small band of Autobots, Optimus faces Lockdown, a ruthless bounty hunter allied with the humans, and KSI, an organization that produces man-made Transformers. Optimus is captured by Lockdown, but the Autobots rescue him. Optimus is quickly losing faith in humanity, but at the urging of Cade, chooses to stay and fight a resurrected Megatron and his new army. Prime awakens the ancient Dinobots, and rides a newly tamed Grimlock into battle through Hong Kong. He kills Lockdown and Harold Attinger at the film's climax as revenge for killing many of his friends, including Ratchet and Leadfoot. At the end of the film, he leaves Earth and flies off into deep space, seeking to find out the truth about his mysterious Creators.[33][34]
© Andrew Sielen and Reality Prose, 2013. Unauthorized use and/or duplication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Andrew Sielen and Reality Prose with appropriate and specific direction to the original content.
Platinum Optimus is a redeco of the Leader Class Optimus Prime. Optimus' color palette is now darkened with some additional paint details. His "Sword of Judgment" is now a light blue. Optimus features more chrome on his "Vector Shield", chest, and on his head. The set was a shared exclusive, available from BigBadToyStore and Toys"R"Us, and was also sold during a Taiwanese event celebrating the launch of Transformers Rising.
An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).
Released as part of the first wave of the Cyberverse Commander class figures, this Optimus Prime is a roughly Scout-sized figure.He comes with a jetpack that can combine with both his truck and robot modes. The jetpack attaches via C joint clips, and the jetpack can transform in and out of a winged configuration when Optimus is in truck mode. Optimus himself features C joint bars for his smokestacks and trailer hitch, as well as bars on the top of his headache rack, while his hands and jetpack can hold/mount his rifles via C joint-related 3mm clips/holes.
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.
(As an odd postscript to this tale of footwear-induced madness, although the promo pictures all showed the shoeformer as a white and navy blue sneaker that transforms into a white and aqua blue robot, the product actually released sported much darker colors for all the robot-mode parts, with a deep teal instead of aqua, and almost all the white replaced by an icky tan/cream/grey color, including the head. Basically, the figure looks like the promo picture viewed through really dark sunglasses. Although this certainly doesn't make it look any more like Prime, you might argue that it looks a little less like Magnus. Sorta. Maybe. Not really.)
Convoy iPod Docking Bay pulls an all-white trailer of similar proportions to his vintage G1 load, with rear wheels and discreet propping feet so it can also stand alone. The trailer transforms (sorta), by rotating a substantial wedge of its full length 90 degrees, kinda like a rectangular Rubik's Cube. This exposes two small speakers and "reveals" an alcove (although a huge gap is still clearly evident in trailer mode) featuring an electronic port in which to plug an iPod or iPod nano, thus becoming a working iPod dock. The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer.

He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.
On a mission with the Triggerbots to stop Megatron from claiming the Underbase, Prime was forced to jettison the massive databank into space to prevent anyone from acquiring its power. With this action, he proved his wisdom and skill to the Autobot Council of Elders. He continued to move up in rank, eventually becoming the field command over the Autobot armies.
With the Japanese Binaltech toy series having transformed into the Kiss Players line, the second figure to be released as a Kiss Players character was Hot Rodimus. Based on the same Ford GT mold as Mirage, Hot Rodimus features several differences from Mirage. First, it has a unique head sculpt, which includes a movable crest to allow a "visor" to be lowered over his eyes, referencing a scene from the animated Transformers Movie during which Hot Rod is on Lookout Mountain. Additionally, it includes a fishing-rod accessory, which can be split and connected in a different configuration to create a tri-barreled arm weapon, reminiscent of Hot Rod's exhaust-pipe blasters. The figure also includes a PVC figurine named Syao Syao and a CD featuring a Kiss Players radio drama. The vehicle mode stays true to the Ford GT's factory color scheme, lacking Hot Rod's signature "flame" detailing, and, like Binaltech, is fully painted. Meanwhile, the robot mode reveals additional orange and yellow body parts, such as the chest, abdomen, arms and hands, as well as flame-like paint applications on the lower arms to link the figure with the original Hot Rod.
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
Q-Transformers Optimus Prime is a tiny super deformed toy based on the Alternity Convoy design, transforming into a Nissan GT-R R35, though his legs retain the traditional blue truck bed motif. The English name on the packaging refers to him as just "Optimus". He comes with a code for unlocking "GTR Optimus Prime" as a playable character in the Q-Transformers: Mystery of Convoy Returns game. Standing at only slightly less than one inch and a half, this is actually the smallest transforming Optimus Prime ever made, which is a fairly impressive feat considering the surprising amount of detail in sculpt and paint apps.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.

The Goldbug change happens in many different continuities, but in the original animated series, it happens like this: while trying to rescue the body of the dead Optimus Prime, which was being held by evil humans, Bumblebee’s damaged by Superion so badly that they have to rebuild him as a more powerful Throttlebot. His new body is much shinier, so a restored Optimus Prime dubs him Goldbug. In the Shattered Glass continuity, he goes evil as Goldbug. And in the IDW comics, confusingly, Goldbug was never affiliated with Bumblebee, but is the leader of the Throttlebots.

Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
Optimus Prime led a group of Autobots who left Cybertron aboard the Ark, which was shot down over Earth, sending them into stasis for four million years. Optimus was badly damaged in the crash, and the prognosis wasn't great, but he recovered in time to announce the Autobots had no choice but to involve the humans in their war. Following a battle at Dyson Dam, Prime persuaded Jetfire to join the Autobot team. When the Decepticons headed through the space bridge to Cybertron, Optimus followed, only for him and his team to be ambushed and imprisoned.
If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
×