Megatron came upon Optimus and challenged his old foe to a duel. Optimus managed to gain the upper hand, but hesitated to deliver the killing blow when he discovered that Megatron had married the Matrix to his spark, corrupting it. Several Decepticons then swarmed Optimus, allowing Megatron to blast a hole through his chest. Dead and defeated, Optimus plummeted down into the bowels of Cybertron. Pax Megatronus Rodimus and Duke travelled far beneath Cybertron, where they discovered Ultra Magnus- the Autobot god of death -carrying Optimus's body away. Earth: R.I.P.
Revenge of the Fallen Legends class Optimus Prime is an all-new, much more accurate mold compared to the 2007 Legends class Prime, having a much greater accuracy in both robot and vehicle mode. In particular, his vehicle mode isn't inexplicably missing one smokestack like the 2007 toy. It should be noted that he was molded in only one paintable plastic color, with red and blue deco patterns decked on it. The top of the truck's bunk (ending up on his back in robot mode) has a slot to combine with Jetfire. For some reason, this isn't mentioned in the instructions, though they're hardly needed.

Part of the fifth wave of Kabaya's revival of the Transformers Gum series, this snap-on transforming model kit of War for Cybertron Optimus Prime is sculpted from red, light blue, and gray plastics, and uses stickers for detail. He comes with a blue non-transforming version of his hand-held blaster rifle, which mounts at the rear in vehicle mode. He comes packed with a model kit of Tigerbreast, and a stick of gum.
In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.

Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
Available with Grimlock, this Optimus Prime is a redeco (or possibly a repaint) of the figure above, featuring extra paint applications on the chest and thighs, and he features a different flame pattern on his side doors. His Autobot insignia is now tampographed on his right arm. The cyberglyphs on his front hood is confusingly translated as "PRIME". The 2-pack also comes with a card, which the glyphs being decoded as "DINOBOTS". Optimus Prime and Grimlock also saw release as a Toys"R"Us Japan exclusive, making this Optimus Prime redeco/slight retool to be first sold at Japanese markets.
Super class Energon Optimus Prime transforms into a Cybertronic short-nosed truck cab. A switch on his back offers four selectable sound effects, each one corresponding to one member of the Prime Force, the four drone vehicles contained within Prime's parallelogram-shaped trailer. A tiny, slightly recessed button above the switch activates the sounds. When Prime transforms to robot mode, the trailer stands upright to become a launch base of sorts for the Prime Force, with three of the trailer's four storage compartments featuring launching mechanisms that propel the vehicles into action. The Prime Force consists of Fire-1, a fire truck with an extending ladder and rotating turret; Copter-2, a helicopter with spinning rotors; Digger-3, a drill tank with a gear-wheel-activated spinning drill; and Submarine-4, a submarine with opening capture claws beneath its bow. The four interchangeable drones can combine with Prime to create his Super Mode; any drone is capable of forming any limb. When in Super Mode, Prime's chest panels are opened, in turn pressing a button on his side that creates more electronic sounds and lights up a red LED in his chest, representing the Spark of Combination.
The toy itself is a mix of different versions. The cab has the safety modifications, including the shortened smokestacks and longer missiles (and thicker rifle), but also has the modified hitch of the 2011 Chronicle DOTM two pack. Meanwhile, the trailer is the lighter grey version from the 2008 Universe release. This version also seems to suffer from mold deterioration.
There are two versions of the voice changer helmet with two different pre-recorded voices. An earlier release features a voice similar to Garry Chalk, while the later release features the voice of Peter Cullen. The latter version has modified packaging under the 'Try Me!' blurb, stating it has 'Real Movie Voice!', though the updated version has also appeared in the original packaging without the 'Real Movie Voice!' notice.

In 2004 the LEGO group was in trouble. They were losing money and losing market share to other toys and entertainment products4.  In order to address some fundamental issues in their business, they needed to cut costs. Leading up to this crisis, LEGO bricks had been adding new designs and colors without consideration for the cost to the business. LEGO went through a large reorganization and cut the production of unique elements in half, the variety of colors in half, and the number of suppliers by 80%. This, in addition to an increase in licensed sets and an expansion into video games, saved the LEGO Company.
Part of a cross-promotion between Toyota and TakaraTomy, the deluxe-sized FJ Optimus Prime transforms into an FJ Cruiser, with his axe weapon becoming the vehicle's spare tire. The vehicle mode's body panels come packaged on the sprue, and can then be clipped onto the core figure. The mass retail release of FJ Optimus includes yellow and white panels, whilst further color variations were available when purchasing an FJ Cruiser at Japanese Toyota dealerships. As is typical of TakaraTomy exclusives, these variants came in grayscale packaging.
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg onto his lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.
Rodimus gained the help of the criminal Witwicky family, believing they would help him learn more about Earth. After fighting Goldbug for leadership of the Autobots, he renamed himself Rodimus Prime. His first attack on the humans was to take control of the base controlling a human military satellite and use it to blackmail the humans into making him the leader of the world. The Decepticons were able to break into the base, where Heatwave used his ability to control machines to have the satellite fire on its own controls and then destroy itself.[16]

Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
The values started becoming inconsistent and skewed in Generation 2 and Beast Wars, when Hasbro apparently thought no child will ever want a toy that is described as anything less than perfect. Thus it became rarer and rarer to see any low numbers. Most characters' numbers hardly ever dipped below 8, the Go-Bot version of Optimus Prime was the first character to have all values at 10, a trend that would repeat for most "leader" characters. When even more powerful versions of the Optimus Primal toy (such as Optimal Optimus) were introduced, Hasbro even invented a "10+" rating in an attempt to keep increasing the power levels. With the Transformers: Cybertron line a few characters even got "Unknown" and "Infinity" ratings.
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
The success of Beast Wars and the change in storyline resulted in its second phase: Beast Machines. Like Beast Wars, the name Transformers was used only as a secondary title. While still a success, the storyline and direction borne by Beast Machines was questioned and criticized by the most ardent fans who knew the previous history of the Transformers. Also, there was a clamor for a return to the original idea of the Transformers, that of their being protean robots with nearly humanlike artificial intelligences who transformed into vehicles or devices.
Optimus Prime is primarily voiced by Peter Cullen in most of his incarnations, who voiced him in the original series. Following the production of the 2007 film, Cullen reprised his role for the sequels and supporting media and would even voice Optimus in later series such as Transformers: Prime. Optimus has been voiced by a number of other voice actors in other series such as Neil Kaplan, Garry Chalk, and David Kaye in the series Transformers: Robots in Disguise, Unicron Trilogy, and Transformers Animated, respectively.
The original Optimus Prime toy, as well as the Diaclone Battle Convoy toy that it was based based upon, transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for Diaclone's driver figures.
Hot Rod has a youthful attitude, and serves as an older brother figure to Daniel Witwicky, son of Autobot ally Spike Witwicky. He has a sort of mentor-student relationship with the veteran Autobot Kup. He was also good friends with Springer and Arcee. Later in life, he temporarily bears the Autobot Matrix of Leadership and becomes Rodimus Prime (Rodimus Convoy in Japan), and new leader of the Autobots.
Surely one of the strangest examples of licensed Transformers products, Sports Label Convoy transforms into a shoe. Something of a shellformer, this baffling incarnation of Prime is colored primarily white and red in his alt mode of a realistic-looking (if notably undersized) Nike Free 7.0 sneaker, complete with gratuitously long real fabric shoelaces. In robot mode, he is made instantly recognizable by his incorporation of some additional blue and silver in predictable areas, and a traditionally Prime-styled head. Less traditionally, and somewhat perversely, Prime's feet are sculpted in the likeness of his own sneaker mode, making it seem like he's wearing himself!
In "Sick Mind", Optimus is infected with the life-threatening Cybonic plague, prompting Arcee and Bumblebee to infiltrate the Nemesis to find a cure for the virus Megatron himself created. As Optimus grows weaker, he learns of Megatron's survival of the space bridge explosion. It was Bumblebee entering Megatron's mind via cortical psychic patch and retrieving the cure that saved Optimus. In the next episode, "Out of His Head", Optimus is, surprisingly, saved by the revived Megatron when he intercepted Starscream's attempted nosedive to kill him.
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.
Eject lamented that all the great and famous Cybertronians, including Optimus Prime, were long gone by the time Cybertron was controlled by the Builder Assembly. Broken Windshields The Maximal Overshoot experienced a series of visions from Cybertron's past after discovering the Oracle, including Optimus Prime launching the Ark during the Great War. Cultural Appropriation
After their own Optimus Prime disappeared, Scavenger and Smokescreen discovered an alternate version of Optimus Prime lying unconscious and barely alive in Autobase Earth. Though Red Alert did what he could, the mysterious Prime reactivated only long enough to utter a cryptic statement about the walls crumbling and the coming of chaos, then died. Worlds Collide, Part 1 of 4
Part of TakaraTomy's Movie Advanced Series lineup, Revenge Optimus Prime is redeco of the 2010 Transformers Battle Blades mold, featuring darker plastic, a pair of flip-out swords (the first release of this mold) from the Hasbro release, and chromed fuel tank-guns & sun visors. His shins & wheel joints are bronze from the Hasbro release as opposed to the grey of Takara's Autobot Alliance release.
The first in TakaraTomy's Hybrid Style series, Galaxy Convoy is a partly die-cast figure with scaled-down equivalents of the accessories that came with the Leader-class figure. This highly-intricate figure retains all the transformation abilities of the original figure—vehicle, flight mode, robot, and Super Mode—and even its Cyber Key-activated features (even coming with two keys so they can be deployed simultaneously), with additional touches like spring-loaded mechanisms that snap his cannons into place, and hand-grips on the weapons for Super Mode. While he does lack electronics or firing missiles, Prime still includes his Matrix, super-tiny yet still removable, and has four alternate sets of hands: two clenched fists, two with pointing index fingers, two with splayed palms, and two curved hands for holding his various weapon handles. Given the figure's small size, a reconfigurable head was infeasible, so it also comes with an alternate Super Mode head with a mouthplate and crests deployed, though the standard head must be attached in order for the figure to be transformed to vehicle mode.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.

As part of the Robot Replicas line, this version of Optimus is a non-transforming action figure that utilizes Revoltech-style jointing. The sculpt hews much closer to the movie CGI model than is possible with the full transforming toys, plus the universal jointing of the line allows for his forearm to be replaced with his hand-cannon... or bits from other Robot Replicas.


This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
×