This figure is an exclusive to San Diego Comic-Con 2011. The toy comes in a packaging shaped like the Matrix of Leadership, which one could wear around their neck, preferably at the convention itself, so passers-by can exclaim "WHERE THE HELL DID YOU GET THAT?" and then try to get one themselves. The Matrix itself comes packaged in a box that is designed to look like Optimus Prime's chest, and opens accordingly. The chest window doors are sealed with a round magnet.
4. Collectability/Internet/Ebay: While Lego has always been a somewhat collectible product, the age of the internet has increased the collectability of Lego. Nostalgic adults came together on the internet to trackdown and re-acquire sets from their child hood. I think Lego has embraced this as evidenced by large limited edition sets aimed at the adult market. This is also evident in the increase in tempo of development of sets and themes that drive the collector to want to buy more and more; which overall is good for Lego. In the past, an individual set and theme seemed to have more life than they do now.
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
The Power Plus series are similar to the Power series, except these come with the core that unlocks extra features. The Bumblebee figures in this series are nearly the same as the Power series versions (Camaro ‘Bee’s Power Plus figure has his unmasked head), so if you’re going to get them, and you want the cores, go with these versions. If you want Optimus Prime at this size, though, you’ll have to go with this version.
This highly accurate model kit of Optimus Prime is a Japanese exclusive. It is extremely possible, and comes with his two swords that can be mounted either on his fore-arm, or the hand can be removed and it placed in the wrist via ball joint. His appearance is based on his Dark of the Moon look, as it his "Abbs". The head can be made either with the face-plate on or the face-plate of which reveals a detailed face. Interestingly though, he doesn't come with any of the guns he uses in the films, though it is thought he can hold Buster Prime's gun.

Each of his kabuto helmets forms the head for one of the two combined modes. In addition, either of his kabuto helmets can be connected to his robot mode back (allowing his swords to also be stored on his back), and both can be connected to the rear of his train mode simultaneously. In robot mode or combined mode, his kabuto helmets can be held individually as a shield or combined into an even larger shield.

Certainly the most iconic, and most common, leader of the Autobots is Optimus Prime. But the thing about Optimus Prime is that he dies... a lot. And every time he dies, someone has to take his place-- until he’s invariably resurrected in one way or another, that is. In many storylines, including the original animated Transformers: The Movie, it’s Hot Rod who takes over as Rodimus Prime.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury
Kabaya's second candy toy of Energon Optimus Prime was released as part of the Hyper Transformers series. This non-transforming figurine depicts Prime in his lesser-seen combined mode with Wing Saber: "Fight Mode", as Hasbro called it, or "Cannon Mode" in Japan. The figure's shoulder cannons came on a separate sprue in-package and had to be removed by the buyer. Prime's head can be removed and attached to the Hyper Transformers Omega Supreme figure, creating Optimus Supreme. As a candy toy, Prime came with a stick of gum.

Also during this time, Micromasters were introduced, and would become one of the last sub-groups of Generation One. Micromasters were tiny Transformers created to compete with the Micro Machines, a hugely popular toy line of the time. While many of the figures had simple transformations and little detail due to their small size, the line eventually expanded to feature Micromaster Transports and Bases, in which Micromasters came with larger vehicles or bases that transformed.

Optimus Prime started life as Optronix (Orion to his friends), Hardwired a data archivist at the Vaults. After taking note of a battle in which the Autobot leader Sentinel Prime had been defeated by Megatron, he was summoned to the Council of Ancients and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, gaining a powerful new body in the process. After dispatching a Decepticon assassination squad sent to, well, assassinate him, he ordered the Autobots to prepare to evacuate Cybertron, intending to leave the Decepticons to their own devices. The War Within #1
As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences
Scarlett later used the Brainwave Scanner to contact Optimus's spirit and guide him back to the mortal realm. In the physical world, Ultra Magnus challenged Megatron to a duel on a Dyson sphere surrounding the sun. The Autobot god had not ferried Optimus to the afterlife - he had merely repaired Optimus's body by taking it into himself. During the climatic duel, he allowed Optimus to burst free from within his armor. The reborn Optimus punched Megatron into the sun, then turned his attention to reclaiming the stolen Matrix from the Decepticons. After Atlas defeated the maddened Primus, Optimus healed Snake-Eyes' injuries. Optimus then turned his attention to returning Primus/Cybertron to its regular orbit. As the planet left the solar system, he departed aboard the Ark 2 alongside a crew of Joes and Autobots, in the hopes of contacting the Makers. The War Never Ends
Optimus Primal, leader of the Maximal faction in the Beast Wars animated series and toy line, is not Optimus Prime. Primal is one of the Maximal descendants of the Autobots, who took the name to honor Optimus Prime. The same applies to the Megatron of this era. Before the animated series began, Hasbro envisioned Prime and Megatron as their beast counterparts, but once the animated series began, this had already been changed. Design elements, such as Prime's mouth-plate slitted to add an actual mouth for the animated series and the first mini-comic that came packaged with the toys, suggest this. Nonetheless, Optimus Prime and Megatron were a major reason the Beast Wars began.

A redeco of Cybertronian Optimus Prime with a translucent red front section, additional (painted) "scratched paint" details, some red paint highlights either omitted or changed to yellow and additional yellow circuitry pattern detailing reminiscent of the jammed abilities/mode lock/EMP effect from the War for Cybertron game, available in a Toys"R"Us-exclusive three-pack with redecos of Cybertronian Megatron and Cybertronian Bumblebee.

Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.
The more interesting "Sky Master Mode", revealed in the "Cybertron Satellite" segment of "Phantom Transformation! Mind-Diving", has him using O.P. as a blaster, two B.2s as leg-thrusters, and two sets of C.L./Jida(!) combinations as back-mounted jet packs. The AMW versions of C.L. and Jida, while not as color-coordinated, are a far more economical option than buying two of each Cliffjumper. Good luck with the second B.2. This mode was created as a "counter" to the aerial combatant Starscream, along with the Energon Sniper Combo Weapon (despite it being a Decepticon-Micron-formed weapon). Apparently, the "Arms Up Mission" game isn't picky about factions.
On another beautiful day, Optimus sat under a tree with Bumblebee and Hound, discussing the Decepticons. A while later, Beachcomber reported that Grapple had shot at him. Optimus smelled a Decepticon plot and led an assault on their headquarters, only to find that Grapple had been injected with a cerebro-shell, placing him in Decepticon control. Battle commenced, during which Grapple was freed and helped them defeat the Decepticon. Afterward Optimus said it all had been worth it to get Grapple back. Insecticon Attack!
If you're still on the fence about Masterpiece MPM-5 Decepticon Barricade, or are considering purchasing Masterpiece MPM-6 Ironhide (which is also currently available), now might be a great chance to grab this Amazon.com exclusive figure from Hasbro. As of this writing, MPM-5 Barricade is currently on sale at Amazon.com for $52.13, which is 35% off the regular retail price of $79.99. Part of the special deal is that he's also available for "FREE" One-Day shipping for Amazon Prime members. Order - Read More
IDW's Transformers Collectors Club exclusive comic story, Revelations part 6, is set after the defeat of Galvatron, but before Optimus Prime's mission to start a new Space Bridge project. In this story, the Autobots from the IDW series Robots in Disguise, Optimus Prime, Ultra Magnus, Sentinel Maximus, Downshift, Perceptor, Alpha Trion, Over-Run, Anti-Blaze, Checkpoint, and Scythe, meet the Autobots from the animated series, Cybertron Optimus Prime, Jetfire, Override, Scattorshot, Red Alert, Hot Shot, Lori, Bud, and Coby Hansen, and thank each other and remembering those who were lost in the battles.[40]
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
Prime suffered a severe, though unfair, defeat when Megatron challenged him to one-on-one combat while imbued with the different abilities of all the Decepticons. Teletraan I, the Ark's computer, discovered the deception in time, and the Autobots were able to drive off the Decepticons. In "Prime Problem", Megatron created a clone of Optimus, which caused confusion with the other Autobots. Windcharger and Spike, however, were able to identify the clone before it led the Autobots into their demise.

Rounding out a bumper year of Japanese-exclusive Generation 1 Optimus Primes, the Takara-licensed Kawada brand Diablock Convoy is a fully transformable Lego-style block building figure similar in premise to the earlier American Built to Rule sets. The Diablock figure, however, easily outstrips the Built to Rule sets by both being an accurate representation of the toy on which it is based, and being able to transform between modes without having to be partially disassembled and put back together first.
Prime's personality had been copied onto a floppy disk by Ethan Zachary, the technician running the game. He employed Prime in various video game scenarios he developed. Prime's damaged mind led him to believe that he himself was a video game character and, in an attempt to bring him back to life, Goldbug, Joyride, Slapdash, and Getaway took the disk to the planet Nebulos. They built a new body for Optimus Prime and upgraded it with the ability to combine with the trailer to form a larger robot. In an effort to keep Transformers off their planet, the Nebulans had poisoned their fuel. The sensation of dying, however, convinced Prime that he was truly alive and not a game character. To save his life, the Nebulan scientist Hi-Q bonded with him, creating Powermaster Optimus Prime. A UK story set around the same time in UK #198, Prime returned to Earth and tried to rekindle his feeling for the planet. After a battle between his forces and an advance force from Cybertron ruined a small town's Christmas festivities, he realized that bringing the Transformers to Earth was far worse than anything his troops could have done and vowed to protect its inhabitants from Decepticon aggression.[6]

Hasbro's Toys R Us-exclusive 2003 reissue of Powermaster Optimus Prime was actually a modified version of Takara's then-recently reissued God Ginrai set. As such, the cab was partly constructed out of die-cast metal, vacuum-metalized plastic and had clear blue windows. The trailer was retooled so the super robot's fists could slide in and out of the arms. This set also included the originally Japanese-exclusive Apex Bomber drone trailer that attached onto the back of Optimus Prime's trailer in vehicle mode, and could become extra armour in super robot mode.The missiles where unchromed and lengthened due to safety issues as opposed to the Japanese release which were chromed and shorter.
When Ultra Magnus, Rodimus, Arcee, and Spike took cover within the Autobot Mausoleum, retreating from an attack led by Galvatron, they found Optimus having risen from the dead! Rodimus returned the Matrix of Leadership to Optimus, only for Optimus to abandon his Autobots, and flee back to Cybertron. Optimus, it seems, has returned to the world of the living changed. Once on Cybertron, Optimus orders a full-scale assault on the Quintesson base. Thankfully, Optimus managed to come to his senses when his memories of being revived by the Quintessons reemerged. After returning the Matrix to Hot Rod and ordering the Autobots to retreat, sacrificed himself once more by guiding the ship he's piloting into the Quintesson's trap. Dark Awakening

Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.


The actual events of the Autobots and Decepticon coming to Earth were never printed by Dreamwave comics, but flashbacks of the events are printed later. These flashbacks suggest that the Autobots allied with humankind and defeated the Decepticons at the turn of the century. They planned to return to Cybertron aboard the newly constructed Ark II, but the ship was destroyed as part of a military conspiracy to take control of the transformers. A terrorist organization, run by the enigmatic Lazarus, was able to seize control of several of the Transformers that fell back to Earth while the U.S. military was occupied with locating Prime's body. Before his departure, Prime had entrusted a small portion of the Matrix to Spike Witwicky, who was forced by the product chief, General Hallo, to use it to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades, and then faced off against Megatron in San Francisco.
In the two-part episode "Megatron Rising", Optimus loses his composure over the recent numerous Decepticon attacks coupled with the fact that Prowl had secretly placed the Dinobots on an island off the coast of Detroit instead of destroying them. He has Ratchet confiscate the Allspark key from Sari, which he loses when he is ambushed by Blitzwing. Optimus also fails to stop a newly resurrected Megatron from acquiring the Allspark. He defeats Megatron by overloading the Allspark in his chest with Sari's key. In the process, the Allspark shatters into countless pieces, scattering all across Detroit.
In robot mode he resembles previous Optimus characters: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
When Optimus and Hound eventually made their way there, they found that C-81 and his gang of criminals had escaped prison and were combating the Waruder soldiers responsible for the planetary shutdown. Optimus mistakenly assumed that C-81 and his goons were there on purpose, and joined them in fending off the invaders. They were soon joined by Burn Out and Lift-Ticket, who informed the Cybertronians that they had stumbled across the Waruders' main hive. Lift-Ticket explained the Waruders could be repelled if he managed to get a sample of the hive's venom. Optimus was willing to go along with Lift-Ticket's dangerous plan, despite C-81's skepticism. However, the battle came to an end when C-81 managed to grab a hold of the Waruders' leader, and forced the bug into peaceful negotiations. Optimus agreed to allow the Waruders to migrate to another Cybertron via C-81's illegal interuniversal gate, in exchange for a venom sample that would be used to create an anti-toxin to revive the TransTech. The General nonetheless impounded C-81's gate afterwards, though he did let the criminals "slip away" as thanks for their part in thwarting the Waruder invasion.
One of the single rarest Lucky Draw Figures in existence, this "Custom Color" redeco of Super Optimus Prime was limited to only one in the world. It was the grand prize of a coloring contest held in Septemeber 2005's TV Magazine, in which entrants colored in lineart of Prime with the deco they wanted to see. The winning entry was in green, blue and gold, while ten runners-up received one of five gold or five silver Lucky Draw versions of Prime.
IDW's Transformers Collectors Club exclusive comic story, Revelations part 6, is set after the defeat of Galvatron, but before Optimus Prime's mission to start a new Space Bridge project. In this story, the Autobots from the IDW series Robots in Disguise, Optimus Prime, Ultra Magnus, Sentinel Maximus, Downshift, Perceptor, Alpha Trion, Over-Run, Anti-Blaze, Checkpoint, and Scythe, meet the Autobots from the animated series, Cybertron Optimus Prime, Jetfire, Override, Scattorshot, Red Alert, Hot Shot, Lori, Bud, and Coby Hansen, and thank each other and remembering those who were lost in the battles.[40]

A gold-chromed version of the Voyager Optimus Prime toy was available as part of the same Lucky Draw contest as the Golden Protoform Optimus (see above) in the December 2007 issue of TV Magazine. Limited to only 3 pieces, it is insanely rare. The photographed sample here features a chromed truck grill, while a boxed unit has an unchromed grey grill; the owners of both pieces, the Mapes Brothers of Transformers @ The Moon, believe both are genuine TakaraTomy toys, so it unsure if the one with the chromed grill is a testshot or a production variant.
The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).

There is some difference of opinion on how the super mode of Leader Class Optimus Prime is supposed to assembled. Takara toys and the television series portrayed with the wings up and his two large guns underslung, however Hasbro later sold the toy with pictures and instructions having the wings down and the guns over the shoulders. Commercials and repainted models by Hasbro went back to the way Takara assembled the super mode. In 2006 a Costco exclusive of Optimus Prime packaged with Wingsaber and a DVD (with Armada Supercon Optimus Prime printed on it!) of the episode United was sold, again with the wings-under gun-over super mode. In Japan a gold chrome edition of this toy was released as a Lucky Draw special.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
The protoform mode consists of eight pieces of metallic blue plastic that plug into the arms, chest, pelvis and legs of the figure. With these pieces attached, the figure can be manipulated in a manner that might charitably be called "transformation" into his meteor-like "entry mode," accomplished by doing little more than tucking the head out of sight and folding the chest back. This blue-and-grey lump can be mounted on a three-piece stand that comes with the figure, allowing you to display it in mid-plummet. Optimus Prime's Earth mode, meanwhile, is made up of many armor pieces (including a particularly large backpack) that form a rather kibbly robot mode, which can then transform into a truck approximating a Peterbilt 379. We would go into what an abominable, unintuitive, parts-massaging mess this transformation is, but we wouldn't want to fill up the rest of the page.
Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
Another redeco of Deluxe-Class Dark of the Moon Prime, this release uses a darker grey, a less magenta-y red, and less gold on the front end. Included is the trailer originally available with the Chronicle release. The trailer holds up to seven MechTech or similar 5mm peg accessories. Four holes are located on the top-front end of the trailer, with another three inside. The door also folds down to become a ramp, and the inside of the trailer is big enough for several Legion or Commander Cyberverse toys, or one smaller-end Deluxe figure. Two C joint bars also run along the bottom of both sides.
An exclusive to Amazon.co.jp, this redeco of Optimus Prime is bundled with the Japanese release of the Revenge of the Fallen DVD. He is another in a long line of black repaints, swapping most of his red and blue plastic for black, some of his bright grey plastic for a cool grey and blue, and is covered with gold and silver flames. His orange blades are now translucent blue.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury
In the two-part episode "Megatron Rising", Optimus loses his composure over the recent numerous Decepticon attacks coupled with the fact that Prowl had secretly placed the Dinobots on an island off the coast of Detroit instead of destroying them. He has Ratchet confiscate the Allspark key from Sari, which he loses when he is ambushed by Blitzwing. Optimus also fails to stop a newly resurrected Megatron from acquiring the Allspark. He defeats Megatron by overloading the Allspark in his chest with Sari's key. In the process, the Allspark shatters into countless pieces, scattering all across Detroit.
If Optimus ordered his troops to attack the Decepticon base, they soon reached an area free of the anti-gravity beam’s influence. They were then attacked by a small fleet of Decepticons. Optimus targeted their squad leader, Dirge, knowing that by downing him, the Decepticons would be significantly demoralized. Dirge was forced to break-off his attack when his back-up was taken out, knowing he wouldn’t be able to take Optimus on without it. Losing their advantage quickly, the Decepticons retreated. But with the battle over, the Autobots noticed a small human boy at their feet. The boy was Buddy, a stowaway from the nearby town, and though Optimus was displeased with the tag-along, the Autobots could not spare the time to bring him home. Arriving at the Decepticon base, Megatron delivered an ultimatum; if the Autobots did not surrender Optimus Prime to the Decepticons immediately, he would use his gravity beam to have the nearby humans float off into space.
Categories: 3H Enterprises charactersAction MastersAutobotsConvoys (Transformers)Devil's Due charactersTransformers automobilesFictional characters introduced in 1984Fictional commandersFictional refugeesScience fiction film charactersFun Publications charactersGo-BotsTriple ChangersMaximals (Transformers)PowermastersPrimes (Transformers)Robot superheroesSpy ChangersTransformers AlternatorsTransformers characters in video gamesTransformers: Energon charactersTransformers: Prime characters
This highly accurate model kit of Optimus Prime is a Japanese exclusive. It is extremely possible, and comes with his two swords that can be mounted either on his fore-arm, or the hand can be removed and it placed in the wrist via ball joint. His appearance is based on his Dark of the Moon look, as it his "Abbs". The head can be made either with the face-plate on or the face-plate of which reveals a detailed face. Interestingly though, he doesn't come with any of the guns he uses in the films, though it is thought he can hold Buster Prime's gun.

Just like Optimus Primal's basic bat toy, this figure was released during the short-lived period when the Beast Wars was still considered to be an extension of the Autobot/Decepticon war, and Optimus Primal was the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.
If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
A second Target-exclusive redeco of the Voyager Class Optimus Prime toy, the gray molded pieces were recolored beige-grey, and multiple parts that were previously molded in blue and red (the chest, shoulder pads, and leg interiors) had their mold colors swapped, with extra paint operations to make up the difference. As such, the toy has very few visual differences from the regular release of the sculpt, in a "doing things differently to achieve a very similar end result" sense. This version was only available in a pack with an unchanged Deluxe Class Bonecrusher.
There is another factor that comes with the sticker shock. As I showed before, LEGO has had $100+ sets for a while. However, only recently have they produced sets even more pricy than that. When we were kids, the $100 set was the pinnacle of LEGO. It was the set we all aspired to own. It was the set we all went straight to at the store. Of course we rarely ended up with that set, but that was our dream.
In 2007, following the release of the Matrix's energy, Prime began to suffer from visions which foretold a great transformation for Cybertron. Events began with the Decepticons' theft of the key to the Plasma Energy Chamber, which forced Prime to consult Alpha Trion within Vector Sigma. Prime learned that the mega-computer had orchestrated events in order to restore Cybertron's Golden Age. When the Plasma Energy Chamber was opened and threatened to drive Earth's Sun supernova, Spike Witwicky and the Nebulans, who had become involved in the conflict as a result of these events, were able to drain off the excess solar energy and revitalize Cybertron. With the Decepticons driven off Cybertron and Nebulon free from tyranny, Cybertron enters into a Golden Age of peace and prosperity under the leadership of Optimus Prime and the Autobots.
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
In the grand Optimus tradition, the cab of Laser Optimus Prime disconnects to become the highly poseable robot mode of Prime himself. Like Powermaster Prime and Hero Prime, the toy features the iconic windshield pecs and grill abs, despite not actually being formed from the actual truck components they emulate. In robot mode, pressing the button on Prime's cab (now on his back) activates a red LED in his right fist which illuminates his clear-plastic sword (which stores beneath his legs in truck mode).
×