Optimus Prime would also be a major character in Devil's Due Publishing's various G.I. Joe meets the Transformers series. Devil's Due Publishing does not address Prime's early years, save that he survived an assassination attempt by Bludgeon soon after receiving the Matrix. The traditional Ark storyline left the transformers crashed on Earth. In this series, instead of being reactivated by the Ark, the transformers and the ark were discovered by the terrorist organization called Cobra. The transformers inside were reformatted into Cobra vehicles, remotely controlled by the Televipers. Prime was turned into a Cobra Sentry Missile System tank, which was a 1985 Sears store exclusive red repaint of the HISS tank.[14] After an attack on a U.N. summit in Washington D.C., Optimus was able to get a message to Wheeljack, alerting G.I. Joe to where the Cobra base was hidden. Subsequently, he and the other captive Autobots and Decepticons broke free. After the ensuing battle, Optimus fought and defeated his enemy Megatron. After Megatron's defeat, the transformers returned to Cybertron in a second Ark Class vessel, but not before giving their human allies the ability to build and use mecha based on Transformers technology.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.

For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added.[24] Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[25] In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10.[26] In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.[27]

Template:Pp-semi-indef Template:Multiple issues Optimus Prime is a character from the Transformers franchise. Prime is the leader of the Autobots, a faction of transforming robots from the planet Cybertron. The autobots are constantly waging war against a rival faction of transforming robots called Decepticons. He is depicted as a brave, powerful, wise and compassionate leader who puts his talent to use improving the universe around him. Optimus is portrayed as having a strong sense of justice and righteousness and has dedicated himself to the protection of all life, particularly the inhabitants of Earth.[1] According to Bob Budiansky, co-writer of the Transformers series, Dennis O'Neil was responsible for his name.

He comes with the Star Saber, which has a 5mm handle and a post on its hilt, as well as two spring-loaded, missile-firing "Ionic Pulse Launchers" (which are called "Eaglefire Missile Launchers" in the instructions). The launchers each feature a 5mm post, have flip open prods, and can peg onto the ports near the wheels on his robot back, giving him a pair of back-mounted rocket engines.
Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
Q-Transformers Optimus Prime is a tiny super deformed toy based on the Alternity Convoy design, transforming into a Nissan GT-R R35, though his legs retain the traditional blue truck bed motif. The English name on the packaging refers to him as just "Optimus". He comes with a code for unlocking "GTR Optimus Prime" as a playable character in the Q-Transformers: Mystery of Convoy Returns game. Standing at only slightly less than one inch and a half, this is actually the smallest transforming Optimus Prime ever made, which is a fairly impressive feat considering the surprising amount of detail in sculpt and paint apps.
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.
This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.
In "The Elite Guard", the Autobot Elite Guard, composed of Ultra Magnus, Jazz, and Sentinel Prime, arrive on Earth to reclaim the Allspark. They don't believe Optimus' story about the Decepticons and Sentinel Prime wishes to have him court-martialled. When a fragment of the Allspark causes a production line to go haywire, Optimus finally stands up to Sentinel, retrieving the fragment, and earning praise from Ultra Magnus.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.
The Autobots tracked SARA's energy signature to a decrepit old building. While a team headed by Jazz stormed the building's main floor as a distraction, Optimus, Hot Rodimus and Brawl infiltrated its basement covertly. Coming upon the Decepticons' inner sanctum, they found Megatron having already wired SARA into his own body! Horrified by this development, Optimus demanded to know what Megatron was planning to do. The true extent of Megatron's megalomania was then revealed; the Decepticon leader planned to use SARA's energy to become ruler of all space-time, even if it meant destroying his home dimension in the process. Both Hot Rodimus and Brawn were knocked aside by Megatron in short order, leaving Optimus with no back-up and few options. Deciding he needed to take down Megatron, even at the cost of his own life, Optimus transformed to vehicle mode and rammed the Decepticon. He then lost consciousness...
Very well written piece. It is very expensive, but as seems to be the trend on here, I would agree you are paying for the quality with LEGO. I like that they have provided the opportunity for adults to build sets with the LEGO Modular buildings range, those sets use real architectural techniques in their construction and are really quite impressive.

Epic Optimus Prime is a 22 inches tall, non-transforming Optimus Prime figure, featuring limited articulation in the waist, shoulders and wrists. His chest can be opened to reveal a command center with a seat and room to display at least three figures. His arms also feature one seat each to accommodate more figurines. The back of his arms and legs are hollow with "shelves" that allow even more figurines to be displayed.
The DOTM packaging release of this 2-pack features an altered paint application on Optimus Prime's ion blaster/barrage cannon. On the original ROTF packaging release, the slide-out barrel on Prime's blaster is painted silver with a black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is left as unpainted grey plastic (exactly like the blaster on the original single-boxed ROTF Buster Optimus Prime). After receiving numerous reports from customers that the silver paint on the slide-out barrel was easily scraped off by merely transforming it from gas tank to blaster, Takara-Tomy briefly stated in an interview that they had addressed the issue for the Dark of the Moon packaged version by swapping the placement of the silver paint application. Thus, the Dark of the Moon packaged version now features the slide-out barrel on Prime's blaster as unpainted grey plastic with an unchanged black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is now painted silver.

QT-M Optimus Prime is a redeco of the GT-R Optimus Prime mold in the colors of the Transformers-sponsored Nissan GT-R used by the Team Mach racing team (a vehicle previously used as the base for non-toy character Mach Five Racing Prime). Like Transformers GT's Safety Prime, this toy was a collaboration with the Super GT racing series and was given away free to young children who attended TakaraTomy-sponsored "Kids Walk" events held by Super GT in the fall season of 2015.
He reappeared in the third crossover, where he apparently acted as Optimus Prime's right-hand man. Putting a team together to look for the missing team that had journeyed to Earth (who had been captured by Serpentor and the Decepticons), he would later lead the combined G.I. Joe/Autobot force that rescued Optimus Prime. In contrast to his usual "youthful rookie" portrayal here Hot Rod seems to be in a high command position, outranking Ultra Magnus, Prowl and Ironhide among others. However, by the fourth crossover Hot Rod is forced to wait on Cybertron under Magnus's command as Optimus Prime journeys to Earth.
Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.
For the 1987 and 1988 lines, Hasbro introduced even more radical ideas through new sub-groups. The Headmasters and Targetmasters came with partners who transformed into the figure's head or weapon, respectively. Powermasters, including the new version of fan favorite Optimus Prime, came with partners that transformed into engines. Each line would see various permutations over the two-year span, including smaller Headmasters, Double Targetmasters, and a Powermaster with two engines.
Take note that the leg construction (thigh parts with legs consists of rear wheels/fifth wheel hitch & engine compartment/flip out legs combination) can become loose after a long time of play due to being used with transformation. Also, the legs did not seem to securely connect due to the hitch's shallow holes & the front half of the legs' small pegs. Also, attaching weapons with 3mm posts on the Battle Cannons' holes can cause some stress marks.
A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.

The bio for the Botcon 2015 version of Megatron reveals that he comes from an alternate reality where Megatron achieved victory during events similar to Dark of the Moon and killed both Optimus and Sentinel Prime. However, Rodimus Prime then arose to challenge him, facing him in a battle that Megatron ultimately chose to flee, resulting in him ending up in the Axiom Nexus.
The protoform mode consists of eight pieces of metallic blue plastic that plug into the arms, chest, pelvis and legs of the figure. With these pieces attached, the figure can be manipulated in a manner that might charitably be called "transformation" into his meteor-like "entry mode," accomplished by doing little more than tucking the head out of sight and folding the chest back. This blue-and-grey lump can be mounted on a three-piece stand that comes with the figure, allowing you to display it in mid-plummet. Optimus Prime's Earth mode, meanwhile, is made up of many armor pieces (including a particularly large backpack) that form a rather kibbly robot mode, which can then transform into a truck approximating a Peterbilt 379. We would go into what an abominable, unintuitive, parts-massaging mess this transformation is, but we wouldn't want to fill up the rest of the page.
Optimus was able to rally Autobot factions from across Cybertron to the cause and launch an all-out attack on Shockwave's fortress. He headed the assault himself, but broke rank when he saw the image of Shockwave blasting Ultra Magnus upon one of the many monitor screens planted around the Decepticon's headquarters. Optimus charged in to confront Shockwave, beating down all opposition along the way. Coming upon Shockwave's throne room, Prime was greeted by Ultra Magnus, who pointed him towards a secret passage through which Shockwave had absconded. Leaving his wounded brother to rest, Optimus barged into Shockwave's secret chambers, only to be overpowered and have the Matrix ripped from his chest. With it, Shockwave was finally able to activate Vector Sigma. Countdown to Extinction Stalling, Prime listened as Shockwave recounted the history of Cybertron, and eventually Ultra Magnus arrived, having recovered, to attack and defeat Shockwave. Prime and Grimlock helped him escape from the fortress as it crumbled to the ground. With Shockwave's defeat, the Autobots would now be able to start rebuilding Cybertron towards true peace... but Optimus remained troubled by Shockwave's motives; he recognized that Shockwave would not be urged to action by mere fancy. Optimus pondered what greater threat awaited Cybertron for Shockwave to so thoroughly plan for its arrival. Revelation The injuries Prime took in this conflict necessitated a prolonged restoration period in stasis. Both he and Ultra Magnus were tended to by Perceptor and Hoist as they recuperated. Generation 1 #0 Though Magnus recovered in due course, Optimus's systems had received a more severe shock due to the Matrix being forcefully removed from his frame. Thus, he needed additional time spent in recovery before he could reboot. Black Sunshine

The back story of the Transformers on ancient Cybertron is told in Transformers: Defiance. In this story, Starscream returns to Cybertron after encountering an enemy scout ship in the Eshems Nebula. After being repaired for minor damage by Ratchet, Starscream and Ironhide report to Optimus Prime and Megatron.[63] In issue #2, Optimus Prime is ordered by Megatron to counter-attack Cybertron's invaders, but instead, Optimus organizes a resistance to Megatron's decision. In issue #3, Optimus Prime, Jazz, and Prowl break into Megatron's quarters while he is away looking for clues to why he is acting so strangely. What they find is an ancient artifact that Megatron had restored.[64]
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
In another possible sequence of events, the trio returned to Autobot headquarters to relate their findings to Optimus Prime. The Decepticons planned to use a Destruction Beam to create a fault line near Center City, which would in turn be exploited by Rumble’s earthquake-inducing abilities to destroy the entire area. The Autobots then decided to split up in two groups, one to attack the Decepticons’ fortress, the other to stop Rumble in Center City. Optimus headed the lead team.
This military-colors redeco of the Auto Roller Dirtbag was planned for late Generation 2 and widely solicited alongside fellow redeco Sargent Hound, but never saw release. Transforming into an "earth mover" dump truck, he has an auto-transforming gimmick activated by rolling his rear wheels; roll forward to go to robot mode, and back to dump truck. A switch on his back end separates the gears of the gimmick, allowing him to roll freely in either mode. In vehicle mode, his missiles can peg onto the front end of the dump-bed for storage. In robot mode, he has a twin spring-loaded missile launcher in his right arm, and a clamping "stun gun" claw on the left.
Optimus Prime is another redeco of Revenge of the Fallen Legends Class Optimus Prime, features gunmetal-stque grey plastic, and his paint operations being similar to the first Revenge of the Fallen Legends Class toy. He is also packaged with Grimlock, himself a redeco of none other than Energon Cruellock. Like other Legion-themed product, he is exclusive to Walmart in the US and Asda in the UK.
General Hawk stated in an interview that his typical transportation in Axiom Nexus was his Convoy colleagues. As the seats of General Optimus Prime's vehicle mode were manufactured at the same location as the VAMPs of his universe, Hawk was able to find a degree of familiarity in the strange world of Axiom Nexus. Andromeda - Axiom Nexus News, 2016/05/01
This figure was made available again, without any changes, in 2015, this time in new packaging resembling the then-concurrent packaging design for the Generations line, but replacing the name "Generations" with "Authentic Transformers". It was also given a new Hasbro product code number and UPC barcode, thereby technically making it a separate product. In 2017, it was re-released again, this time in a minor variant of the 2014 version's packaging (including the original product code number and barcode) that now lacked the reference to the non-existing "Reveal the Shield" gimmick.
The third version [18] would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and Triple Changer. The Headmaster also would have been a Triple Changer, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.

What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
Take note that the leg construction (thigh parts with legs consists of rear wheels/fifth wheel hitch & engine compartment/flip out legs combination) can become loose after a long time of play due to being used with transformation. Also, the legs did not seem to securely connect due to the hitch's shallow holes & the front half of the legs' small pegs. Also, attaching weapons with 3mm posts on the Battle Cannons' holes can cause some stress marks.
In another possible sequence of events, the trio returned to Autobot headquarters to relate their findings to Optimus Prime. The Decepticons planned to use a Destruction Beam to create a fault line near Center City, which would in turn be exploited by Rumble’s earthquake-inducing abilities to destroy the entire area. The Autobots then decided to split up in two groups, one to attack the Decepticons’ fortress, the other to stop Rumble in Center City. Optimus headed the lead team.
The brand was yet to get its biggest revitalization, though. In 2007, Paramount Pictures released a high-budget live-action movie. Though many long-time fans resented the changes in style and story that the movie brought forth, it performed incredibly well at the box office and launched the brand into the public eye all over the world. Now, everyone recognized the concept of alien robots disguised as cars, and everyone associated the concept with the name: Transformers.
From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.
Yet another rerelease of the original toy mold, this gift set of course includes the cab, combat deck trailer, and Roller. Hasbro stock photography of the set depicts Prime with full-length smokestacks, but this would not be the first time that stock photography does not accurately represent the final product. The set also includes a reprint of the first issue of the Marvel Comics series, as well as a DVD containing the entire "More than Meets the Eye" pilot. The set also features a battery-powered Autobot symbol that plays the classic transformation sound, speech recorded by Peter Cullen, and a snippet of the G1 series theme song.
Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.
Revenge of the Fallen Legends class Optimus Prime is an all-new, much more accurate mold compared to the 2007 Legends class Prime, having a much greater accuracy in both robot and vehicle mode. In particular, his vehicle mode isn't inexplicably missing one smokestack like the 2007 toy. It should be noted that he was molded in only one paintable plastic color, with red and blue deco patterns decked on it. The top of the truck's bunk (ending up on his back in robot mode) has a slot to combine with Jetfire. For some reason, this isn't mentioned in the instructions, though they're hardly needed.
An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).
The key sports a tampographed Autobot insignia, a red border, and the Key Code "D56B" tampographed on the back. This code, when entered on Hasbro's website, was supposed to unlock additional information on the character or the toy, but due to an error on behalf of Hasbro, it unlocked information intended for Optimus Prime's wave-mate, the aforementioned Deluxe Class Demolishor; Optimus Prime's information was instead unlocked using the code "dt67", which was tampographed on the back of the Cyber Key included with said Demolishor toy.

This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.


TFcon has announced their latest guest update: Bill Ratner! People will recognize Ratner as the voice of Dashiell Faireborn in the Transformers Generation 1 cartoon. He is also better known by his code name Flint in G.I. Joe. TFcon 2019 is earlier than normal, taking place in Los Angeles, California from March 15-17. The guest roll call already includes Michael Bell, Neil Ross, Alan Oppenheimer, Paul Eiding, Arthur Burghardt, Michael Horton, Morgan Lofting, Jack Lawrence, Alex Milne, Donald - Read More
He’s continued to be lovable through many different continuities, all the way to the current live-action film series. But as much as you love him, there may be a few things you don’t know about him. So let’s take a look at some of his strange real-world facts, storyline goofiness, pop-culture tie-ins and even his relationship to Back to the Future.
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!

The conclusion to the storyline was forestalled when Hasbro retracted 3H Enterprise's license, but an explanation can be found in issue 8 of the Transformers Collectors Club magazine, Cybertron/Robots in Disguise. In this issue, Prime tells the tale of how Unicron's forces were defeated in the last battle by Optimus Primal's forces and Unicron disappeared into the black hole opened in Transformers: Energon. Combined as Omega Prime, they could not escape fast enough, and were sucked into another dimension.

This new roughly 11-inch leader-sized mold of Optimus Prime transforms from a robot to trailer/truck combination and back, with the transformation taking cues from both the Reveal the Shield Legends Class and the Robots in Disguise Legion Class toys. Surprisingly, he does have a reasonable amount of articulation, including a balljointed head and hinged joints for his arms, shoulders and legs, plus lateral hinges for his feet. His head includes light-piping and, unlike other Cyber Series toys, his truck windows have actual transparent plastic rather than just being merely painted.
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
I agree with Aidan but would expand on his point. It’s not just that the sets seemed bigger; they were. As the relative complexity of sets has increased, so too has the piece count, but there has been an overall decline in the size of the models due to increased build complexity and a corresponding reduction in size of the pieces required to create such detail. The negative affect on perceived value in this is apparent, though I would argue, misguided when one considers the build quality and detail of new and recent sets.
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. [20][21]
Optimus Primal, leader of the Maximal faction in the Beast Wars animated series and toy line, is not Optimus Prime. Primal is one of the Maximal descendants of the Autobots, who took the name to honor Optimus Prime. The same applies to the Megatron of this era. Before the animated series began, Hasbro envisioned Prime and Megatron as their beast counterparts, but once the animated series began, this had already been changed. Design elements, such as Prime's mouth-plate slitted to add an actual mouth for the animated series and the first mini-comic that came packaged with the toys, suggest this. Nonetheless, Optimus Prime and Megatron were a major reason the Beast Wars began, as Megatron's Predacon namesake traveled back in time seeking to alter history and insure that the Decepticons triumphed over the Autobots.
Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.
If Optimus allowed the cured Autobots to charge headlong into battle, he and the rest of the Autobots who were still running low on fuel stayed behind as back-up to the main charge. The Autobots’ first wave of warriors were quickly overpowered by the arrival of Megatron, prompting Optimus to lead the energy-depleated Autobots into the fray. Optimus’s opening volley struck down Shockwave. Optimus and his troops soon found themselves running on empty, and Optimus called for a retreat. Thankfully, the Decepticons were damaged enough through the course of the battle, causing them to retreat as well.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.

Rodimus can be unlocked by beating "Dam 6" in Arena Mode, credited as Hot Shot. Rodimus is described as being young, impetuous, showing enthusiasm and confidence which borders on arrogance. He boldly claims that he has both skill and looks, though he is not too keen being paired with Kup on missions. Somehow, he became corrupted by Dark Energon. If the player manages to defeat him, he calms down, shrugging off the effects of the Dark Energon and returning to his regular self.


Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.

Note: Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor and a stepup/stepdown transformer (the electrical kind) with advice from an electronics specialty shop is recommended.
If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.
In the grand Optimus tradition, the cab of Laser Optimus Prime disconnects to become the highly poseable robot mode of Prime himself. Like Powermaster Prime and Hero Prime, the toy features the iconic windshield pecs and grill abs, despite not actually being formed from the actual truck components they emulate. In robot mode, pressing the button on Prime's cab (now on his back) activates a red LED in his right fist which illuminates his clear-plastic sword (which stores beneath his legs in truck mode).
×