The largest 2007 Transformers movie Optimus Prime toy, Leader Class Optimus Prime featured, at the time, the most accurate representation of the CGI designs' complex transformation sequence. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel hitch is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
We may be four days in 2019, but that certainly isn't too late to post a special New Year's message from everyone's favorite yellow Volkswagen Beetle, right? To promote the upcoming Bumblebee Movie premiere in Japan in March (that's right, March!) a New Year's video message from Bee himself has been posted to YouTube and Twitter. What the actual message says we don't know, but we'll update when we do. The message is then followed by a full scene clip (in English with Japanese subtitles) where - Read More
We may be four days in 2019, but that certainly isn't too late to post a special New Year's message from everyone's favorite yellow Volkswagen Beetle, right? To promote the upcoming Bumblebee Movie premiere in Japan in March (that's right, March!) a New Year's video message from Bee himself has been posted to YouTube and Twitter. What the actual message says we don't know, but we'll update when we do. The message is then followed by a full scene clip (in English with Japanese subtitles) where - Read More

The set is a counterpart to TakaraTomy's simultaneously-available Transformers Animated Sons of Cybertron set, which also features translucent versions of that line's Deluxe Optimus Prime and Rodimus figures. It was intended as an exclusive for the Japanese Chara Hobby 2010 festival, but was also initially offered as a raffle prize at the 2010 "Autobot Alliance" event in the Philippines.,[1] and was later available for purchase at Cybertron Con 2010 in Shanghai.
There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.
On another beautiful day, Optimus sat under a tree with Bumblebee and Hound, discussing the Decepticons. A while later, Beachcomber reported that Grapple had shot at him. Optimus smelled a Decepticon plot and led an assault on their headquarters, only to find that Grapple had been injected with a cerebro-shell, placing him in Decepticon control. Battle commenced, during which Grapple was freed and helped them defeat the Decepticon. Afterward Optimus said it all had been worth it to get Grapple back. Insecticon Attack!
In the Japanese exclusive Transformers: The Headmasters storyline (which replaced the "Rebirth" finale in Japanese continuity), Hot Rod appeared as part of Optimus Prime's inner circle. When Galvatron and his Headmaster warriors launched a devastating attack on Cybertron, Vector Sigma was damaged, and Hot Rod was sent to Earth to retrieve the Matrix. Recovering it, he returned it to Prime, only to be surprised when the ghost of Alpha Trion once again reformatted him into Rodimus Prime to help Optimus. After Prime's second death, Rodimus once again took command of the Autobots. However, when Scorponok destroyed Vector Sigma, Rodimus decided to leave the war, and left Fortress Maximus in command of the Autobots.
The other new additions were two black spring-loaded missile launchers that fire red projectiles. In vehicle mode, these attached to the soundbox (an echo of Powermaster Optimus Prime's cannons, perhaps), and could be held in Optimus Prime's fists in robot mode. These launchers were not created for Prime; they were retooled versions of the launcher from Barricade of the G.I. Joe line.

Part of the first wave of Bot Shots Series 1 single-packs, Optimus Prime is a teeny little long-nosed semi truck with "trailer", with a spring-loaded automatic transformation to robot mode triggered when his front bumper is pressed. He has a "spinner" in his chest that shows his three attack types and power levels. His truck mode and robot body are influenced by the live-action Optimus Prime, while his head is taken from the original. His blue paint is light and sparkly-metallic, his red paint is dull matte, and his optics are yellow.
Our Deal of the Day features hand-picked daily deals with low prices on top electronic products, video games, tools, items for your kitchen and home, sporting goods, computer software, and more. Every day you will see our Lightning Deals displaying limited-time deals at great prices; make sure you buy quickly because these deals will go away fast. Our other Savings and Sales include hundreds of items throughout Amazon to pique your interest for savings on HDTVs; movies or TV shows; fashion items like clothing, jewelry, and watches; toys; and magazines. Come back often as our deals update daily.

Alternity Convoy was simultaneously available in both this silver coloration, and a deco based on his traditional appearance termed "Vibrant Red" (see below). The figure was later redecoed to create "Convoy Super Black" (representing not Optimus Prime, but Universe Nemesis Prime), Alternity Ultra Magnus, and Alternity Dai Atlas. It was retooled into Transformers GT GT-R Prime, GT-R Saber, GT-R Megatron and GT-R Maximus.


On Cybertron, Optimus Prime kicked back to do a little bit of paperwork and reminisce. With Shockwave defeated, Cybertron was enjoying a new era of peace. He was interrupted by Hot Rod, who reported that a group of "pesky humans with their peashooters" were giving an Autobot team on Earth a hard time. Prime suspected Cobra's involvement and counseled Hot Rod not to be so dismissive of the humans. The Art of War #1 When the team returned to Cybertron and mysteriously vanished in the Gladiator Zone, Prime was prepared to go search for them, but was convinced by Hot Rod to stay behind and organize a peace ceremony. The Art of War #2
Takara's release of Optimus Prime the following year made a few changes, noticeably replacing the gold paint and plastic of the Hasbro toy with bright yellow and much brighter gold. The deco has been tweaked to be a bit closer to the original prototype glimpsed in early catalogs, with yellow added back to cab Prime's feet and the cab grill painted silver, and the Super Mode's waist getting much more paint. This version of the figure was never burdened with the mobility-inhibiting shoulder tabs. Completing the Super Mode combination triggered a new clip of Prime shouting "Convoy, ready for battle!" in Japanese instead of generic mechanical sounds. Late in the run, JUSCO stores offered this toy with blind-packed "Space Galaxy" versions of the individual Destruction Mini-Con Team members, one toy per box.
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge
Part of the first wave of Age of Extinction: Generations Leader Class toys, this is yet another completely new "big" Optimus Prime figure. While smaller than the First Edition toy, this one features more silver and chrome paint in vehicle mode, a more poseable robot mode, and a Vector Shield accessory instead of the Sentinel Shield. Unlike the First Edition figure, Leader Class Optimus Prime's pauldrons and hip-skirts are formed from truck kibble, giving him a marginally smaller backpack. His accessories have roughly the same functionality as the First Edition toy, with his sword being hand-held and pegged onto his hands or storing underneath the truck, and his shield mounting onto his left forearm or storing on the back of the truck. Additionally, the sword sheath underneath the truck can be folded up and used in robot mode.
Tim Bailey, Sara Blackburn, Stephen Clark, Jeffrey Cohen, Adam Dimuzio, Mathias DeRider, Tom Fassbender, Luke Forney, Logan Giannini, Travis Hanson, Sean Hallenbeck, Michael Harrison, Kim Haynes, Whit Honea, Greg Howley, Michael J., Angela Leach, Michael LeSauvage, Jim MacQuarrie, Eric Parrish, Michael Pistiolas, Ricardo Rebelo, Drew Rich, Mitchell Roush, Mariana Ruiz, Tony Sims, Randy Slavey, Erik Stanfill, Andrew Terranova, Gerry Tolbert, Mark Vorenkamp, Chris Wickersham
The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".
Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)

As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences


General Optimus Prime later attended a meeting of the Convoy held by Starscream. There, he assured the others present that he had been mistaken about the rumored Megatron's identity. Starscream was convinced, but the rest of the Convoy were savvy to the truth. The other Optimuses supported General Optimus Prime's decision, stating that if C-81 had earned the General's trust, that was good enough for the rest of them. Optimus was later seen hanging out with Spy-Eye on his off-time. Cybertron's Most Wanted
Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.

Following a battle which left him grievously wounded, Optimus Prime's entire structural integrity and circuitry processors were reprogrammed into a sleeker, stronger, combat-ready configuration. With a new giant laser-targeting rocket launcher, ripple-fire missile blaster and armor-piercing discs, Optimus was ready to immobilize Megatron once and for all.

We know that despite starting his fictional life as a lovable, horn-headed robot who could turn into a Volkswagen in Generation 1, Bumblebee's most well-known these days as a round-headed robot who turns into a Camaro. In fact, younger viewers might not even realize he was ever anything but the Chevy muscle car. But there’s one quirky continuity where he’s able to switch between original and movie modes at will.

This deluxe-size, highly-poseable version of Armada Optimus Prime is an entirely new mold, retaining the ability to tow Super Base Prime's trailer, though he cannot combine with it. He comes with the Mini-Con Over-Run, who can transform into a gun for him, or can peg onto the Powerlinx plug on Optimus's back to activate a double-fisted "punching" action (that looks more like hyperactive shrugging). Like the Super Base figure, Prime has a flip down chestplate, but lacks a molded-in Matrix, and his smokestacks can be removed (and in many cases will simply fall off), but cannot peg together as a gun. Shipping in a great many waves throughout most of the later run of the line, Super-Con Optimus became a notorious pegwarmer.
In Titan Magazines' UK Transformers magazine, a comic strip on Optimus Prime, written by Simon Furman, would reveal where he was during the events of Movie Prequel #1. As he carries out his fateful plan to send the Allspark into space, the Autobot base is attacked by one of Megatron's drones with specific orders to kill him. As it locates the Allspark, Prime does the only thing he could think of to prevent it from transmitting its location to Megatron. He transforms into protoform mode and physically rams through it. Recovering in time to see the Allspark blast off, Prime is granted a vision of their war on Earth.
Hot Rodimus also appeared in the Japanese exclusive Kiss Players storyline. In the alternate timeline of Kiss Players, Hot Rodimus has given up the Matrix to Ultra Magnus after his actions in hurling Galvatron out of Unicron's body resulted in the Decepticon leader crashing into and devastating Tokyo, rather than landing on Thrull, as seen in the original continuity. He subsequently came to Earth to try to repair relations with the humans, but was instead attacked and nearly killed by a Legion Creature, a hybrid created from Galvatron's Unicron-corrupted cells fusing with local creatures. He was saved by a kiss from the human Li Shao-Shao and reformatted into a body resembling a Ford GT. He went on to battle the Earth Defense Command (an anti-Transformer organization), the Legion - and Optimus Prime himself. Prime had been resurrected in a Kiss Player body, but Hot Rodimus, believing his commander to be dead, thought it was a trick.
This Optimus Prime is an extensive screen-accurate redeco of the Dark of the Moon Supreme Class/Leader Class Striker retool, using the Ion Blaster accessory from the Buster Optimus Prime and the Toys R Us Japan-exclusive battle blade accessories. He also comes with the Knuckle piece and the Battle Hooks and uses the 2-2-1 articulated fingers featured from the second Asia Premium Series release. He also features a Japanese language sound box for his voice gimmick, replacing Peter Cullen's "I am Optimus Prime" voice line.
His main gimmick, however, is his quintet of "Firebreath Cyclocannons"—spring-loaded dragon-headed missile launchers mounted on an ornate, rotating circular contraption attached to his back/roof. Turning the handle on top makes the backpack rotate and cycle through each cannon, and pressing the handle's button will trigger and fire whatever cannon is at the top/front. When the cannons are cycled through in robot mode, his eyes and windshield-chest light up, and one can alternatively rotate (but not fire) the cannons and activate his light-up features by pushing down on the fake spiky fenders on his stomach. Out of the package, the handle itself comes detached to allow the rest of the toy to fit.

All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.
Beast Wars: Transformers had to be renamed in some countries, particularly Canada, because of concern over the word "war" in the title. So, in some countries, it was released under the title Beasties. Long-time Transformers fans noticed the prominence of the words "Beast Wars" over "Transformers", the latter appearing in small type under the former. The Transformers' fan base splintered into two groups as a direct result, with the one enjoying Beast Wars for what it was and the other refusing to accept it as official canon in the Transformers mythology.
The Japanese release of Powermaster Optimus Prime actually represented a new character named Ginrai, and featured several retools: the cab featured die-cast metal, shortened smokestacks, vacuum-metalized plastic and clear blue windows, while the trailer was given retractable super robot fists. This Japanese version was eventually issued by Hasbro in 2003 as part of the Commemorative Series collection (see below).
×