In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.
Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. Unlike in all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.
A redeco of of the Cyber Commander toy above, this Prime features grey plastic replacing the original blue, some deco differences on the arms, body & legs. He also features a flame tampograph on the sides of his vehicle front. He comes in an altered packaging that replaces the first version's painted prototype stock photos with CG renders depicting the new deco, and also features a new Hasbro product code number, thus making him officially a separate product rather than a drastic running change variant.
"Hero Mashers" Optimus Prime, Bumblebee and Grimlock took on Megatron in the middle of a busy city. Optimus came to Bumblebee's help while riding atop of Grimlock, swapping heads with his mount to bite Megatron's arm off, getting a hold of the Decepticon's jetpack at the same time. He attached both pieces to himself, and flew around for a bit before returning to the battle. He thoroughly scrambled his pieces with those of his teammates, then took down Megatron with his "dino-fist." Afterwards, the Autobots returned to their normal configurations (though it took them more than one try to do so!) Hero Mashers commercial
This creation and expansion of the secondary market in conjunction with LEGO now marketing some of their products to an older audience has made the prices of some old sets increase exponentially. On the extreme range, there is the UCS Millennium Falcon that is selling new for upwards of $2,000 (and close to $1,500 USED!). It sold for $500 new in 2007. Even non-licensed sets can run a premium, such as the Cafe Corner that was one of the original modular buildings. It was $150 new and now it can sell for over $1,000.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate head sculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime Leader-class-based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
Prime comes with all the accessories of his previous release, although his ever-changing ion blaster is now somewhat confusingly cast in blue plastic. He features one major additional accessory: an electronic display base sculpted with the image of the Matrix and the Autobot insignia. Pressing the insignia's crest triggers a series of electronic soundbytes, mostly quotes from the movie recited not by original actor Peter Cullen, but by Hasbro's in-house actor, Ron Hayden: "Autobots, transform and roll out!", "I want you to make a special run to Autobot City," "Megatron must be stopped!", "All we need is a little energon, and a lot of luck," and two samples of the classic transformation sound effect, one ascending, one descending.
In this set, both the buildable Optimus Prime and the included Kreon figure are in the style of Beast Hunters Optimus Prime. In addition to the robot mode having a buildable shield and sword, both it and the vehicle build have two firing missile launchers. Additionally, four hands are included, with two possibilities for each arm. These Optimus Primes come with a buildable Predacon beast Lazerback and an Energon Kicker Kreon.
Then he dreamed of awakening, only to find his troops smashed. Realizing his only hope for survival lay with Cybertron, Optimus then boarded the ship the Autobots were repairing, and travelled back to his home planet. Arriving on Cybertron, he found it completely under Decepticon domination. Optimus then met an old Autobot codger who pleaded that he return to Earth to gather a force that could overthrow the Decepticon’s regime. Optimus remorsefully told the old Autobot that there could be no reinforcements from the planet Earth. The two Autobots were then swarmed by Decepticon police officers, who Optimus fought until his dying breath…
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
The first toy in TakaraTomy's United toyline is a redeco of the War for Cybertron Deluxe Class Optimus Prime, transforming into a Cybertronic "armored truck". As has been TakaraTomy's wont of late, he now sports a metallic red paint job, with brighter pink paint applications and cooler grey parts, and features several additional paint details to those present on the Hasbro figure in the form of black chest windows and pink lines on his face mask. His rifle transforms as well, folding and plugging into the roof of the vehicle mode. The rifle can also peg into his forearms, and, in its compact configuration, can attach to his shoulders via peg holes on the backs of his front tires or stored behind his back in robot mode.
First Edition Optimus Prime is, as his title suggests, the first toy available to the public from the Age of Extinction toy line. Prime is an all-new Leader Class-sized figure, featuring his new Western Star "5700 OP" concept truck vehicle mode and his updated robot mode from the film (well, mostly based on his initial design rather than the final design in the movie). His transformation is much simpler than his counterparts from the previous three movie lines, being billed as transforming in "15 easy steps." His torso, shoulders, upper legs, and the vehicle mode grill are all completely chrome with the exception of minor blue and red details painted on his chest. However, this comes at the expense of his smokestacks and wheels being bare gray plastic, whereas they are chromed in the film. His simplified transformation also comes at the expense of having a very bulky "backpack" of kibble composed of the rear of the truck cab and the fuel tanks, limiting his shoulder and hip articulation. However, his Truck kibble can be detached from the main figure to form the majority of his vehicle mode on its own.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).
Universe Optimus Prime is a redeco of the Robots in Disguise Scourge Spy Changer toy. He replaces most of the black plastic with predominantly red and blue, with silver for detailing, with an overall deco making him resemble the original Optimus Prime. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
Generation 1 Optimus Prime has appeared in numerous video games since the introduction of the Transformers series. He makes a cameo in the 1999 Beast Wars Transmetals video game for Nintendo 64, where he is killed by Megatron at the end of the campaign, showing what would have happened in the Beast Wars series with a Predacon victory. Prime is also one of the playable characters in the 2003 Japan-only Transformers game for the PlayStation 2 and the 2010 Transformers: War for Cybertron. Optimus Prime is also playable in the Hasbro Net Jet Transformers fighting game Transformers Battle Universe. Three versions of Optimus Prime are playable characters, including the first generation incarnation, his incarnations from the 2007 live-action film, and the incarnation from Transformers Animated. In this game, Optimus Primal is also a playable character. He is a regular character in the Nintendo GameCube and PlayStation 2 2003 fighting game DreamMix TV World Fighters. He appeared as a boss in a simple Flash-based video game on the Hasbro web site.
After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6
This TakaraTomy Asian market-exclusive Leader Class two-pack consists of a redecoed Jetfire and a slightly altered Buster Optimus Prime. Buster Optimus Prime is almost identical to the single-pack Japanese release of the toy, but unlike the standalone Buster Prime, has a head with a faceplate, itself containing more paint details than the first release of Revenge of the Fallen Leader-class Optimus Prime. The flames are outlined with light blue instead of white for accuracy to the physical truck prop (though it ends up being inaccurate in robot mode). Jetfire has a subtle, more movie-accurate colour scheme.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt, but due to the aforementioned lessened complexity significant sacrifices had to be made, such as "cheats" to the transformation sequence, to achieve this and thus he is overall less accurate than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. However, he maintains a superb level of articulation and posability.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
Optimus later led a convoy in search for a building site for Autobot City, which ran into a Decepticon ambush. Rodimus Prime remembers the Transformers greatest battle on Earth. He sent off several Autobots to get help, knowing this was the only chance of victory. Transformers Combat Data Those several Autobots were seen again, but Prime... wasn't.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such. Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
It may be that the price of an individual brick has gone down over time, but what does it matter if the size of the bricks has decreased overtime? Sure, the average number of pieces in a set has increased, but how many of those pieces are tiny details? To answer this question, I compiled all the weight data on brickset.com and compared the sets by their price per gram in a similar fashion to how I compared them by price of piece. Below is the chart of my results (prices are in US dollars).
Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
This redeco of Leader-class Optimus Prime replaced most of the plastics in the cab robot with colored translucent equivalents, with chromed silver wrist-pipes, a golden chrome Matrix, and red chrome window frames. His trailer remained opaque, but was cast in much deeper red plastic, with a more metallic silver used for his cannons. He was available only in a Toys"R"Us Japanese exclusive giftset released in October 2005, with a redeco of Wing Saber, and the Coby Sen'yō Rumble.
NEW! TFSource News - IF Catastrophe, Flame Toys Tarn Final Stock, MMC Cylindrus, MP-36+ Megatron & More! NEW HOT INSTOCK ITEMS: - Iron Factory - IF-EX24X War Giant Catastrophe - Set Of 5 - Flame Toys - Transformers - Tarn - Mastermind Creations - Ocular Max - R-34 Cylindrus - Mech Fans Toys - MF-37 Veteran and MF-20 Scourgers - Magic Square - MS-B02F Fevernova - Diaclone Reboot - DA-30 Powered System Maneuver Gamma & Delta Set - Planet X - PX-C01 Ismenios - Transformers Encore - - Read More
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno. The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
A Japan-exclusive release of the Voyager Class figure with a trailer and a different Mech Tech weapon. The trailer opens like the original G1 toy and fits up to two Deluxe Class vehicles of the same toy line. In addition, the trailer can hold over 20 Mech Tech weapons. The supplied Mech Tech weapon is a blaster with a retractable blade designed similarly to Optimus' forearm swords.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
The key sports a tampographed Autobot insignia, a red border, and the Key Code "D56B" tampographed on the back. This code, when entered on Hasbro's website, was supposed to unlock additional information on the character or the toy, but due to an error on behalf of Hasbro, it unlocked information intended for Optimus Prime's wave-mate, the aforementioned Deluxe Class Demolishor; Optimus Prime's information was instead unlocked using the code "dt67", which was tampographed on the back of the Cyber Key included with said Demolishor toy.
Having been removed from toy store shelves after 1985, Optimus Prime was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie premiering that year. He cost $21.50 and 5 Robot Points. He was also offered in 'The Autobots Have A Special Mission For...' mail-away pamphlet and came with a special "Movie Edition Certificate" and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)