Prime appeared again in the fourth crossover called "Black Horizon". When Hawk, who had been afflicted by the Matrix, began getting dire visions of a new threat, Prime journeyed to Earth. He took Hawk and Flint to Tibet to discover the source of the problem, only to encounter Bludgeon once again. Prime battled Bludgeon and only won due to intervention by Hawk. Fighting their way into a secret city beneath the Himalayas, the trio realized the extent of the threat. At stake was the impending destruction of humanity by Unicron and the world being taken over by Cobra-La. Optimus and Hawk were discovered by Bludgeon and a group of Cobra-La troops. Prime defeated Bludgeon, then, with Hawk and Joe Colton, gatecrashed the Cobra-La ceremony to sacrifice Firewall to Unicron. Prime was mobbed by Cobra-La warriors and pinned down by a monstrous insectoid creature. Prime demolished them in time to save Hawk from Golobulus. With Cobra-La arrested by G.I. Joe, Prime made sure his comrades were okay before sitting down to watch TV with Eject and Firewall.
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.
The second known version [17] ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.

The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.

Part of the first wave of Bot Shots Series 1 launchers, this repaint of Optimus Prime comes with a large trailer that pops open to form a battle station with a spring-loaded launching platform. He appears to have the same plastic colors as the single release, and the same set of paint operations, but his paint is done in different shades, having glossy dark blue paint and glossy bright red paint. The black part of his launcher is sculpted to look vaguely like the repair done that is part of Generation 1 Optimus Prime's repair bay.
This new roughly 11-inch leader-sized mold of Optimus Prime transforms from a robot to trailer/truck combination and back, with the transformation taking cues from both the Reveal the Shield Legends Class and the Robots in Disguise Legion Class toys. Surprisingly, he does have a reasonable amount of articulation, including a balljointed head and hinged joints for his arms, shoulders and legs, plus lateral hinges for his feet. His head includes light-piping and, unlike other Cyber Series toys, his truck windows have actual transparent plastic rather than just being merely painted.
If instead of all heading into the lab together, the Autobots had sent in Bumblebee alone, and Bumblebee subsequently managed to escape with the antidote to the Decepticons’ poison, the Autobots escaped from the Valley of Poison and returned to Autobot headquarters. Once the other Autobots were cured, they all drank a toast to Bumblebee, to celebrate his part in the mission Decepticon Poison
A second Target-exclusive redeco of the Voyager Class Optimus Prime toy, the gray molded pieces were recolored beige-grey, and multiple parts that were previously molded in blue and red (the chest, shoulder pads, and leg interiors) had their mold colors swapped, with extra paint operations to make up the difference. As such, the toy has very few visual differences from the regular release of the sculpt, in a "doing things differently to achieve a very similar end result" sense. This version was only available in a pack with an unchanged Deluxe Class Bonecrusher.
Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Released exclusively in Japan, Bumblebee Legendary Optimus Prime is an all-new Leader Class mold, taking many cues from the Age of Extinction Evasion Mode Optimus Prime mold. His head can also switch into either maskless or masked faces. He also comes with an Ion Blaster, which can be pegged on his 5mm compatible hands and can store on his back. His truck mode can tow Convoy's (MP-10) trailer.

Nearly all the chrome is worn off, the tips of both smokestacks are broken, the fists and guns and voice box are long gone, there's a huge chip of plastic broken off one of the shoulders. I still have the trailer, but it's also broken in a few places. The door is gone. The spring-loaded gimmick doesn't work anymore. The repair drone broke off entirely near one of the joints on the main arm and was thrown away many years ago.


In the series released by Marvel Comics, before the Great War broke out on Cybertron, the robot who would be Optimus Prime, before he received the Matrix of Leadership from Sentinel Prime, was a Transformer of note, displaying his skills in the Infraformers Sharpshooting Competition. When the war began, Prime quickly made a name for himself as a combat leader of the Autobots.

ROBOTKINGDOM.COM Newsletter #1462 Hi, Here is a quick update from www.robotkingdom.com.  #1 Hot Items! Flame Toys : Transformers Star Saber. Preorder. Available in May 2019. US359.90 http://www.robotkingdom.com/ftstarsaber.html Flame Toys [Furai Model] - Bumble Bee. Preorder. Available in May 2019. US44.90 http://www.robotkingdom.com/4897054512308.html Takara Transformers Masterpiece MP-34 Masterpiece - Read More
Released as part of the "W Convoy" campaign ("Double" Convoy, that is!) alongside a silver chrome version of Energon Rodimus, this gold chrome "Mēki" ("plating") version of the Deluxe size Optimus Prime toy was available only as a prize in a mail-in Robot Points contest. Initially limited to 20 units in the original draw, it appears that many more were made available through toy store drawings, given how many went on to appear on online auction sites through 2005 and 2006.
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, bumps (thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners and the windscreen visor. In robot mode the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
INFOBAR Optimus Prime (ANNIN) is a redeco of INFOBAR Optimus Prime (NISHIKIGOI), transforming into a recreation of the ANNIN edition of the INFOBAR cellphone. All-white in cellphone mode, he sports additional blue and red detailing in robot mode. Like the other figures in this line, he is not a working cellphone but can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. [20][21]
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.
As had first been done in the Armada line, Takara elected to supplement their release of the Super class Optimus Prime figure with a new-mold Deluxe class toy. Coming without trailer, Prime Force or electronics, this Prime discarded the larger toy's ability to form Super Mode in favor of being able to Powerlinx with the other compatible toys of the Energon line, forming either a torso or a pair of legs that the other Autobots could connect to. Like the Deluxe Armada Prime, this one too was on the small side for its size class, but just as that figure could, this small Prime can still tow the Super class figure's trailer.
Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.

Ultra Magnus is a redeco of the Diaclone "Powered Convoy" figure, itself a redeco and slight retool of "Battle Convoy", the toy that became the original Optimus Prime figure, sporting a new trailer. One of the last few Diaclone toys to be released in the Transformers toyline, Magnus was recolored from the original toy's dark blue, red and black color scheme into a more patriotic red, white and blue, though his chestplate, which was rendered white in his package art followed a more the blue color scheme of his shoulders. He transforms into a Freightliner COE, towing a car-carrier trailer capable of transporting up to four normal-sized Autobot cars. As with Optimus Prime, his cab transforms into a small robot, which can then combine with the trailer to form a "super robot", although all original Generation 1 fiction prior to the 21st century ignored this and simply rendered the super robot as Magnus's default robot form. To facilitate this combination, Magnus sports a slightly longer front axle than Prime, thereby creating tabs on either side of the cab that slide into grooves in the trailer to help lock the small robot into place. He is armed with a rifle sporting two handles that allow either of his robot modes to hold it, and two shoulder-mounted missile launchers, whose spring-loaded firing mechanism was removed for the Hasbro release of the figure.

One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]

After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6


In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate head sculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime Leader-class-based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
Also, as a new feature, most figures include advanced "automorph technology", which is designed to create quicker and easier conversion, which means moving one part of the vehicle or robot causes other parts to move, creating a final shift to battle mode; this was successful because the transformation was more complex in the movie line than in any other Transformers toy line.
Optimus foiled Megatron's attack on 21st century Tokyo after informing his old foe that wherever he would pop up, the Autobots would be there to thwart his evil intentions. Henkei! Henkei! volume 1 Optimus and Bumblebee later intervened when Astrotrain attacked Shinjuku Station, using their bodies to shield nearby humans from the destruction the triple-changer brought about. They were unaware that Astrotrain's rampage was really a distraction staged to keep their attention away from Megatron's gathering of energon cubes nearby. Henkei! Henkei! volume 2 Optimus continued to do battle against Astrotrain until Rodimus showed up to provide the Autobots with additional firepower. Henkei! Henkei! volume 3
The U.S. release of Super Fire Convoy had the Japanese voice replaced with an English voice (with the lines, "Optimus Prime, Maximize!" and "Autobots, Transform"), and Autobot insignias were added on the side panels. Much like the Japanese version, Optimus Prime's normal robot mode can combine with Ultra Magnus (sold separately) to form Omega Prime.[48]

JETWING OPTIMUS PRIME Black Ver. is a black, teal, and chrome redeco of Jetwing Optimus Prime exclusive to the Asian market. He appears to have been based on the cancelled TakaraTomy contest prize Jetwing Optimus Prime Black Version (see above), with a few color alterations here and there, plus the obvious addition of chrome. It was originally solicited by online retailers as the far goofier-sounding "Dark Nightwatch Jetwing Optimus Prime".

The problem there is that Star Wars took over the Space theme and Harry Potter took over the Castle theme. Just keeping up with the kids- sign of the times. What’s a castle lover to do? Compare 6075 (Castle) with (7094 Kings Castle Siege) and 4757 (Hogwarts) and they all have their own fantastic attributes. Sell the Harry minifigs and buy some crownies- problem solved.
Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.

Mission Racer Optimus Prime features a pull-back gimmick by using a rubber band: insert the rubber band onto the front and rear post, then place Optimus Prime onto the ramp and pull his trailer backwards, and release the trailer for allowing the truck to zoom forward. The rubber band also has Optimus Prime's name and the Autobot insignia tampographed oh it.
Every two weeks, Seibertron.com brings you a Top 5 list related to all things Transformers written by me, your fellow editor. These are our opinions so what matters most is what you guys think of the topic or list, and I hope to see your own lists or comments on omissions and ranking. Let's have fun! All previous lists can be found here. Top 5 Best Cliffjumper toys With Cliffjumper having a surprise appearance in the Bumblebee movie I figured we were due for a rundown of the best - Read More

Optimus Prime is another redeco of Revenge of the Fallen Legends Class Optimus Prime, features gunmetal-stque grey plastic, and his paint operations being similar to the first Revenge of the Fallen Legends Class toy. He is also packaged with Grimlock, himself a redeco of none other than Energon Cruellock. Like other Legion-themed product, he is exclusive to Walmart in the US and Asda in the UK.


In 1986 the Transformers animated movie had been released, and during the run of the movie, through a pamphlet that came with certain figures, you could order certain Transformers through the mail, such as Optimus Prime among other toys. The toys came in a standard brown mailer box, with items, booklet, and a limited Edition Movie certificate and sticker.
The subject of Bumblebee’s voice is a bit of a complicated matter. Just as he was the second Transformer ever seen on the original TV show, he was also the second to speak and did so in the loud and clear voice of Dan Gilvezan, who voiced him throughout the original series and animated movie. But by the time we get to the first live-action movie, he could only talk via audio clips because, according to a prequel comic, Megatron had destroyed his voice capacitor during a battle on Cybertron.

In the two-part episode "Megatron Rising", Optimus loses his composure over the recent numerous Decepticon attacks coupled with the fact that Prowl had secretly placed the Dinobots on an island off the coast of Detroit instead of destroying them. He has Ratchet confiscate the Allspark key from Sari, which he loses when he is ambushed by Blitzwing. Optimus also fails to stop a newly resurrected Megatron from acquiring the Allspark. He defeats Megatron by overloading the Allspark in his chest with Sari's key. In the process, the Allspark shatters into countless pieces, scattering all across Detroit.
A slight redeco of Takara's Deluxe-size Optimus Prime was released as part of a special set commemorating both the 20th anniversary of Transformers and the 30th anniversary of its progenitor, Microman. Coming with an exclusive metallic redeco of Takara's Kicker, which was based on the Microman body, this Prime featured a chromed grill where the original had painted plastic, and supposedly slightly shinier plastics. Very slightly.
In Titan Magazines' UK Transformers magazine, a comic strip on Optimus Prime, written by Simon Furman, would reveal where he was during the events of Movie Prequel #1. As he carries out his fateful plan to send the Allspark into space, the Autobot base is attacked by one of Megatron's drones with specific orders to kill him. As it locates the Allspark, Prime does the only thing he could think of to prevent it from transmitting its location to Megatron. He transforms into protoform mode and physically rams through it. Recovering in time to see the Allspark blast off, Prime is granted a vision of their war on Earth.
Available exclusively from Japanese clothing company A Bathing Ape in 2017, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique black color scheme matching the Convoy Reissue BAPE Ver. BLACK of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
Released as part of the "W Convoy" campaign ("Double" Convoy, that is!) alongside a silver chrome version of Energon Rodimus, this gold chrome "Mēki" ("plating") version of the Deluxe size Optimus Prime toy was available only as a prize in a mail-in Robot Points contest. Initially limited to 20 units in the original draw, it appears that many more were made available through toy store drawings, given how many went on to appear on online auction sites through 2005 and 2006.
Optimus and Bumblebee snuck into the Decepticons' base, and found their enemies upgrading themselves with Autobot parts. The pair took offense to this, and Bumblebee set about sabotaging the process. Megatron wound up tripping on some gumballs thanks to the Autobot's mucking about, and Optimus congratulated his fellow Autobot on a prank well done! Intro!
Many who received their first LEGO set in the early 1990’s are now adults looking forward to buying a LEGO set for their first child or for themselves. When we are younger, we do not fully understand how money works. We do not realize that a large LEGO set can require hours of work to earn. We only know what we want. I would wager that it isn’t until our first jobs that we can fully appreciate the value of money. We all wanted the large sets as kids and we didn’t realize how hard our parents had to work for them.
Optimus led the search for the AllSpark through space, but he and his troops were unable to locate the artifact. Though the search seemed hopeless, Optimus assured the others that they would not give up until Cybertron's last hope for survival was found... At that moment, a strange green pig crashed through one of the ship's windows, with the AllSpark in tow. Optimus stared in bewilderment at the strange creature as it asked for a ride back home. Hard Boiled
The Power Plus series are similar to the Power series, except these come with the core that unlocks extra features. The Bumblebee figures in this series are nearly the same as the Power series versions (Camaro ‘Bee’s Power Plus figure has his unmasked head), so if you’re going to get them, and you want the cores, go with these versions. If you want Optimus Prime at this size, though, you’ll have to go with this version.

The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.


Every two weeks, Seibertron.com brings you a Top 5 list related to all things Transformers written by me, your fellow editor. These are our opinions so what matters most is what you guys think of the topic or list, and I hope to see your own lists or comments on omissions and ranking. Let's have fun! All previous lists can be found here. Top 5 Best Cliffjumper toys With Cliffjumper having a surprise appearance in the Bumblebee movie I figured we were due for a rundown of the best - Read More
As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences
The 2010 Transformers "Reveal the Shield" Legends Class Optimus Prime sculpt in the deco from the first Chronicle EZ Collection wave (see below) was released as a "Dollar Store" exclusive (available at stores such as Dollar General and Big Lots) in generic 2010 Transformers packaging packaging alongside Starscream, Bumblebee and Megatron. The initial release saw the copyright year removed, while a later running change variant featured the new tooling originally used for Generations Legends Class Motorbreath, with not only the retooled hands and a hole on the back of his head/top of his vehicle mode compatible with 3mm posts, but also Motorbreath's sword accessory.
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
Cloud Optimus Prime is a redeco of the Classics Voyager Class Optimus Prime mold, transforming into a modern cab-over style truck of made up model, dominated by a large "energy unit" on his roof (actually a wind vane). He features a similar Generation 1-inspired deco to the original toy, but aims for a "cleaner" appearance by omitting many paint details such as stripes on the cab, while the energy unit is colored black with a silver Autobot insignia in homage to Generation 2 Optimus Prime. In robot mode, Prime's energy unit transforms into a large blaster and his smokestacks transform into a smaller laser cannon. Additionally, both weapons can combine together to form a double-barrelled over-shoulder weapon. He was available exclusively at TakaraTomy Mall.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces. 
×