Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
The series begins when Optimus and his crew, after picking up a disillusioned ninja named Prowl, are sent to clear rubble from a space bridge passage. There, the Autobots stumbled upon the Allspark and are immediately attacked by Megatron's battle cruiser, the Nemesis. Through treachery by Megatron's second-in-command, Starscream, Megatron was fragged and the Autobots crashed on Earth in the early 21st century. After being in stasis under Lake Erie for 50 years, the Autobots awaken in Detroit of the near future, where they immediately discovered humans in need and became heroes of the city. During the battle for the possession of the Allspark, Optimus goes offline after defeating Starscream, only to be revived by Sari Sumdac and her Allspark-infused key.

The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, and bumpers (and thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners, and the windscreen visor. In robot mode, the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.

As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.


A Bic Camera and Joshin Kids' Land exclusive, this redeco is the first release of the Prime: First Edition Deluxe class Optimus Prime figure in Japan, featuring a slightly lighter hue of red (the stock photography provided by TakaraTomy, showed Orion Pax's red plastic features more pink than its original toy, this seems to have been a trick of the lighting or a photoshop), and greyish blue plastic. He features several customer-applied foil stickers, including Decepticon insignias of varying sizes. He comes with a gold vac-metal version of the Arms Micron, R.A., as well as the normal blaster-cannon.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.

Hasbro has had a bit of a strange relationship with Bumblebee. In the early days (we’re talking mid-’80s) he was hugely popular, both on the TV show and as a toy, and Hasbro was sure to capitalize on that. As a result, there were more different Bumblebee toys during that time and into the early ‘90s than for any other Transformer. Of course, the alternate Goldbug version helped boost the number of toys they could make.

During a Decepticon attack, Cliffjumper pleaded with Optimus to let him jump into the fray. Optimus denied his request, telling him that they already had the Decepticons on the run. In the battle’s aftermath, the Decepticon’s activity seem to vanish altogether. Grateful for the quiet, Optimus decided to head out and fetch extra fuel for the Autobots with Sparkplug. He returned just in time to find his Autobots in the middle of a battle with the Decepticons. With Sparkplug and Prowl’s help, Optimus refuelled his troops, and once more drove the Decepticons back. Revenge of the Decepticons

Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.


If Optimus decided to send the lead team to attack the Decepticon headquarters, the team managed to infiltrate the Decepticon headquarters by using Beachcomber’s knowledge of the secret doors’ location, and Brawn’s strength to keep the doors opened. The Autobots then stormed the fortress, and Optimus maimed Megatron himself with a shot of his rifle. He then grappled the Decepticon leader, and forced him to lead himself, Inferno and Beachcomber to the Decepticons’ lab. There, the Autobots disabled and destroyed the Destruction Beam device, captured Megatron, and left many Decepticons permanently maimed. Though they later traded Megatron back to the Decepticons for the safe relief of the Autobots captured in Center City, the Autobots were ultimately victorious that day.
Power of the Primes "Evolution Optimus Prime" transforms from a truck with a trailer into a robot and back. The individual truck transforms into his "Orion Pax" form based on his appearance in the Generation 1 episode "War Dawn", and he is able to form the core of Optimus Prime's robot mode. His trailer forms Prime's entire body, and his ion blaster can be split into two weapons. He includes the Matrix of Leadership, which can store in his chest in the 'Evolved' form. The center of his Matrix of Leadership can be replaced with any Prime Master. In an undocumented feature, his rifle can be stored on his back as Optimus Prime by pegging it into Orion Pax's hands.The Takara version of the mold lacks the production numbers located at his right shins. Depending on the individual copy, Optimus Prime is prone to having a number of quality control issues: ranging from two left/right arms and/or legs/feet on the evolution armor, to lacking stickers on the trailer pieces.
Exclusive to LDH Shop, this redeco of the Music Label Convoy toy is utterly ridiculous and was created as a promotion for the Japanese pop band EXILE. While Convoy himself has EXILE written on his right forearm, his trailer sports the "Love Dream Happiness" tagline of LDH Inc.[1], as well as the "EXILE Perfect Year 2008" logo of the "EXILE Perfect Year 2008 Ultimate Best Box" boxset, which was released some months after he was.
The China KO has been out for years. It's about 95% the same quality as an official product. The average price is $35-$40 shipped from China. Do not purchase from buyallhappy as this seller fraudulently claims to ship from Los Angeles but ships from China and prices the toy much higher. The seller also ships in a crappy cardboard box and the toy will likely arrive crushed. Most China sellers will use 6 pieces of thick styrofoam as a box which is much more durable.
During the three-part "One Shall Rise", Optimus uses the Matrix of Leadership to defeat Unicron. Unfortunately, in doing so, he not only emptied the wisdom of the Primes, but lost his own memories as a Prime, believing himself to be Orion Pax once again. Megatron took advantage of this to manipulate Orion into deciphering Iacon records the Decepticons have stolen from Cybertron. Eventually, Orion figures out the truth and escapes. Jack is later able to restore Optimus' memories after downloading the wisdom of the Primes from Vector Sigma into its key which Optimus gave him before he left to stop Unicron. However, Optimus could not recall the time he spend as a Decepticon.
There is also a smaller "Legends of Cybertron" Micro sized version of this Optimus Prime, without a trailer, and a Burger King Kid's Meal toy, again without a trailer. There is also a rotating sucker holder version of Cybertron Optimus Prime. Later releases of the Leader class and Micro class Optimus Prime were repainted in darker colors, supposedly representing Optimus Prime after the television story. This toy is called Galaxy Force Optimus Prime. A special metallic painted version of this toy was included with Megalo COnvoy in Japan.
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.

Optimus Prime and his troops lay deactivated on the Fera Islands for three million years until G.I. Joe stumbled upon them one day in 1939. The Line The Autobots were reactivated by a repair drone and given new disguises, with Optimus Prime being reformatted into an unknown World War II-era human vehicle. He explained to Duke who they were, and learned that Megatron's Decepticons had been reactivated a year prior, and were currently wreaking havoc on Europe along with Cobra. While hesitant at first, Optimus Prime soon joined G.I. Joe in their mission to destroy Cobra and the Decepticons. Transformed After commanding the Aerialbots to get the Seekers out of the way, Prime advanced across the Fera Islands, but met resistance in the form of Rumble. Trial by Fire


The Autobots and the Decepticons came to a distant world in the grip of an ice age. Assuming alternate modes based upon the dominant (though doomed) indigenous creatures of this planet, they continued their ancient, unending war. However, the Autobots, with their energy levels dangerously low, withdrew from combat as the world grew colder. They sought refuge in a deep cavern and entered stasis lock, awaiting the day when surface conditions changed to better suit their operation. Hearts of Steel #1 Optimus lay under the Mare Rurek Glacier. Infestation 2: The Transformers #1 Millions of years later, Bumblebee was awoken by the hammering of humans working on a rail line. He briefly considered awakening Optimus Prime, but thought better of it. After discovering the world had changed significantly, Ratchet thought there was no reason to awaken Prime. Hearts of Steel #1 When Bumblebee discovered the Decepticons were once again active on this world, Ratchet and Prowl agreed that the Autobots must intervene, but again decided out of rousing Optimus from his slumber. Hearts of Steel #2
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.

LEGO has changed a lot in its history. It started as a wooden toy company before it discovered the benefits of molded plastic. Since the advent of the brick, we have been able to build everything from houses, to spaceships, to working robots. The increased detail and wider product line has allowed for the blossoming of the idea of LEGO as an art medium7. LEGO bricks walk the line between giving people more pieces that can be used to add detail and restricting the pieces to inspire creativity. There is a balance that can be seen through the amazing works, both large and small, that can be done with a bit of patience and an eye for plastic.


A Bic Camera and Joshin Kids' Land exclusive, this redeco is the first release of the Prime: First Edition Deluxe class Optimus Prime figure in Japan, featuring a slightly lighter hue of red (the stock photography provided by TakaraTomy, showed Orion Pax's red plastic features more pink than its original toy, this seems to have been a trick of the lighting or a photoshop), and greyish blue plastic. He features several customer-applied foil stickers, including Decepticon insignias of varying sizes. He comes with a gold vac-metal version of the Arms Micron, R.A., as well as the normal blaster-cannon.
© 2019 Hasbro.com All rights reserved. All audio, visual and textual content on this site (including all names, characters, images, trademarks and logos) are protected by trademark, copyrights and other Intellectual Property rights owned by Hasbro or its subsidiaries, licensors, licensees, suppliers and accounts. By using this site, you agree to the Terms and Conditions of Use.
2. Piece diversity: Today the total range of piece types and the number of new piece types introduced every year has skyrocketed since the decade of the 80s. As a kid, the new pieces introduced every year were indeed one of the great answers to my parents’ pleas of “don’t you already have ENOUGH Legos?!?!” However, the quantity of new piece types again coupled with the broad color diversity again requires much more Lego to be purchased to attain that “critical mass”.
As part of the Robot Replicas line, this version of Optimus is a non-transforming action figure that utilizes Revoltech-style jointing. The sculpt hews much closer to the movie CGI model than is possible with the full transforming toys, plus the universal jointing of the line allows for his forearm to be replaced with his hand-cannon... or bits from other Robot Replicas.
Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
A perfect example of why I dislike modern Transformers more and more. I'm 22, and when I was younger Transformers were my favorite thing. I still have many of the ones I had back then. But nowadays I'll go to Target or Toys R Us (RIP) and see what Hasbro has been up to, and they're bragging about how this Transformer only takes 5 steps to transform!
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.

This Optimus Prime is a redeco of the figure above, featuring red wheels and various Tech Spec-sque patterns on the legs & chest which can be decoded with their transparent red weapons, which is molded in a sprue similar to the ones used for the Arms Microns kits & Robots in Disguise (2015) Mini-Con figures. He can use any weapons included in this set, although his primary weapon is an axe.

After the rise of the Decepticons and the death of the merciless Zeta Prime, he became the Prime, and entered what would become a millions-of-years-long war of attrition with the Decepticons, which would lead to the death of Cybertron and the spreading of the Cybertronian civil war far beyond their homeworld in a push for resources. With the end of the war and the emptying of the Matrix of Leadership to restart Vector Sigma and rebirth Cybertron, he found himself rejected by the returning civilian population, and - secretly gladly - abdicated his rank and returned to his original name of Orion Pax as he travelled through the galaxy.


The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
×