This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.
After the Great War, Optimus Prime disappeared with other legends into the mysterious location on Cybertron dubbed J'nwan, where Optimus himself became the "Authority" who spoke on behalf of the others. Sandstorm, the leader of a rebellion in a 32nd-century firmly under the heel of the tyrannical Shokaract, entered J'nwan to plead with the heroes of Cybertron's past for aid. He hoped to convince them to join the fight against the Predacon warlord. After a mind-crushing journey which left all of his companions dead or deranged, Sandstorm finally found an audience with the Authority and his brethren, but they declined to help, with the Authority stating that their time was past and the war was no longer their war. The Authority then in some way manipulated Sandstorm's trip out of J'nwan such that it was comparatively short and simple. Paradox
Part of the first wave of Bot Shots Series 1 launchers, this repaint of Optimus Prime comes with a large trailer that pops open to form a battle station with a spring-loaded launching platform. He appears to have the same plastic colors as the single release, and the same set of paint operations, but his paint is done in different shades, having glossy dark blue paint and glossy bright red paint. The black part of his launcher is sculpted to look vaguely like the repair done that is part of Generation 1 Optimus Prime's repair bay.
Part of the sixth wave of Custom Kreons, and the first (and only) Robots in Disguise-themed wave, Optimus Prime uses the new 2015 Kreon construction with the hollow waist-peg and "raised" hands.. He comes with a buildable parts rack on which to hang/store his extra pieces. Unlike the previous Custom Kreons, he no longer features a chromed helmet, and comes with an extra clear-plastic helmet, torso, legs, and his arms, plus a chromed Bazooka (originally from the Kre-O Battleship sets), and some kind of a dual pick-axe with a clear red staff.
A redeco of the first Sports Label Convoy, this figure transforms into a white, navy, and grey sneaker. Promotional images for the figure depicted its robot mode as white and aqua-blue, but the finished product was visibly darker, produced in shades of off-white and dark teal. In either coloration, it sure as heck looks like it should be Ultra Magnus, but for whatever reason... it ain't.
The second Optimus Primal toy was an ape in the Ultra size class. Though the transformation from primate to humanoid was a relatively simplistic one, the toy compensated with more than a fair share of weaponry and action features. A compartment on his right forearm opened to reveal a skull-shaped mace he could hold in his fist. His left forearm could open into a double-barreled missile launcher. On his back were two spring-loaded missile launchers which auto-flipped over each shoulder. By pulling a lever in the center of his back, both arms would either spin at the bicep or bend in and out at the elbow, depending on the placement of notch-buttons located on either bicep. This gimmick was shown to be an effort to simulate a gorilla beating its chest while Optimus was in beast mode, but could also be used in robot mode, making him swing his weapons wildly before himself. And finally, like many first-year Beast Wars toys, a battle mask/"mutant head" could be deployed over his robot head.
This set is a ToysЯUs Japan exclusive, consisting of Powerlinx Optimus Prime (dubbed "Convoy Final Battle Coloration" and redecoed with more show-accurate colours, principally a silver mouthplate instead of red and varying color saturation from the Hasbro version), a "crystal" version of Overload ("Ultra Magnus Special Clear Version") made out of transluscent plastics, and an exclusive X-Dimension redeco of the Street Action Mini-Con Team. This set is entirely "new" content not available in the normal mass-retail Micron Legend line, and is also the last release of "X-Dimension" Mini-Cons. Rather than come with individual bio cards for the various characters, the set came with only a single card for Magna Convoy.
In just seven years, from 1997 to 2004, the number of elements in the company’s inventory exploded, ascending from slightly more than 6,000 to more than 14,200. So did its range of colors, which climbed from the original six (red, yellow, blue, green, black, and white) to more than fifty. As the number of components and colors mounted, soaring supply and production costs plundered the company’s bottom line. Here’s why.
Exclusive to LDH Shop, this redeco of the Music Label Convoy toy is utterly ridiculous and was created as a promotion for the Japanese pop band EXILE. While Convoy himself has EXILE written on his right forearm, his trailer sports the "Love Dream Happiness" tagline of LDH Inc., as well as the "EXILE Perfect Year 2008" logo of the "EXILE Perfect Year 2008 Ultimate Best Box" boxset, which was released some months after he was.
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
Available exclusively from Japanese clothing company A Bathing Ape in 2015, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique deep red color scheme matching the Convoy Reissue BAPE Ver. RED of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
The Optimus Prime Battle Rig Blaster transforms from a superdeformed amalgamation of his Movie truck and G1 Optimus Prime's truck (indeed pulling G1 Prime's trailer) to a fully G1 robotic forearm and hand with a built in Nerf style gun. By simply placing your hand inside the back of the trailer (I need an adult!) and pulling back on the front of the truck, the gun transforms and folds back into a weapon. It comes with three Nerf N-Strike size whistle darts which can be stored inside the trailer. Although not shown in the image, the truck front splits in half in gun-mode, while the grille acts as a sight. This toy was marketed as 'Optimus Prime Big Rig Blaster' overseas.
Per Ravage's original plan, with Unicron defeated, the Decepticons returned to conquer the transformers. Optimus Prime had also planned for this event, and sent Mirage to press a switch, buried deep within Cybertron, that would render all transformers inert. This was seen at the conclusion of the "Five Faces of Darkness" story arc from the original animated series. Optimus hoped that by rendering all the transformers inoperative, the war would be stopped, hoping that the humans would be able to reactivate the transformers in the future. Instead of deactivating all transformers, however, only those with original Cybertronian bodies were deactivated. Transformers with Earth-made Binaltech bodies continued to function. The Autobots effectively won the war, the large army of Binaltech Autobots easily outnumbering the few Decepticons who had managed to procure Binaltech upgrades. The few Decepticons remaining, effectively just Nemesis Prime and Shockwave, escaped with Megatron and their other inert comrades.
Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. It is interesting that, unlike all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.
The second known version  ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
This silver-chromed redeco of the Leader-class Optimus Prime figure first saw the light of day as a prize in a TV Magazine mail-in, offered alongside a gold chrome version of the same toy (see above). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (see below). Despite being offered in equal quantities in these contests, this silver version is apparently much harder to come by.
The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
Hybrid Style Optimus Prime is an insanely detailed and complex transforming toy, created under the supervision of famed mecha designer Shōji Kawamori. Standing only three and three-quarter inches tall in robot mode, the figure is partially constructed from die-cast metal and features one of the most complex transformation sequences ever seen on a Transformers figure of its size. Alas, the small size of the figure also works against it, as it required several design concessions that resulted in (if we're being nice about it) an unimpressive cab mode.
We may be four days in 2019, but that certainly isn't too late to post a special New Year's message from everyone's favorite yellow Volkswagen Beetle, right? To promote the upcoming Bumblebee Movie premiere in Japan in March (that's right, March!) a New Year's video message from Bee himself has been posted to YouTube and Twitter. What the actual message says we don't know, but we'll update when we do. The message is then followed by a full scene clip (in English with Japanese subtitles) where - Read More
Optimus Prime and his troops lay deactivated on the Fera Islands for three million years until G.I. Joe stumbled upon them one day in 1939. The Line The Autobots were reactivated by a repair drone and given new disguises, with Optimus Prime being reformatted into an unknown World War II-era human vehicle. He explained to Duke who they were, and learned that Megatron's Decepticons had been reactivated a year prior, and were currently wreaking havoc on Europe along with Cobra. While hesitant at first, Optimus Prime soon joined G.I. Joe in their mission to destroy Cobra and the Decepticons. Transformed After commanding the Aerialbots to get the Seekers out of the way, Prime advanced across the Fera Islands, but met resistance in the form of Rumble. Trial by Fire
Simon Furman's "Alignment", a text story available through Transforce, a British Transformers convention, mentions Prime falling during what was intended to be the final conflict with the Decepticons at Pinea Omicron, long after the events of the Generation 2 comic book. He managed to defeat Galvatron II, but in doing so, was damaged such that Grimlock had to engage a stasis field around him to save his flickering Spark, making Prime a living war monument.
LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
A retool of Crash Combiner Optimus Prime available in a two-pack with Grimlock, featuring a new Optimus Prime-ish Combiner head and new arm parts with a green dinosaur-themed front shoulder pads, and he features a lighter shade of red plastic. Like the previous versions, Optimus Prime can become the top half of any Crash Combiner gestalt, though his official combination is with Grimlock as Primelock.
Alternators Optimus Prime transforms into an accurate 1:24 scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. Several of the details of his robot mode body are based on the sculpt of the 20th Anniversary Optimus Prime figure, but the head itself shares more similarities with the Powermaster mold. He is armed with a small pistol which transforms into his vehicle mode engine.
In an alternate version of this reality, Rodimus was forced to deal with a militant and aggressive Optimus Prime, and Cybertron was soon wracked by a three-way war between Optimus' Autobots, Rodimus' Omnicons, and Megatron's Decepticons. Unfortunately, the balance of the conflict tipped with the arrival of dimension-hopping tyrant Megazarak, whose Destructicons allied with the Decepticons, creating a force that soon annihilated Autobot and Omnicon alike. However, the Destructicons then turned upon their allies and destroyed them before being abducted by Unicron. This universe was then drained of all life and energy by Tornedron, whose creator Primacron was also destroyed.
Henkei! Henkei! Transformers Convoy is a redeco of Classics Optimus Prime. He features a significantly altered colour scheme, generally to make the toy more closely resemble his appearance in the Generation One cartoon and the original toyline. His truck mode features less silver paint striping, but compensates by vacuum-metalizing the entire grill/fender area silver chrome. In robot mode all of his previously grey plastic has been replaced with red plastic and mostly painted silver (or in case of the grill & bumper, chromed), along with smaller decos. Since Henkei! toys do not feature a heat-sensitive rubsign, Henkei Convoy has two Autobot sigils tampographed onto his shoulders.
I you can get an official reissue for around the same price, do it. I lucked out and got an opened but mint Encore for $50 last week but you'll be getting lucky that way. All Hasbro reissues have short smokestacks and long stacks are harder to get separate to swap out. Average price for a Japanese reissue is around $100 opened. If you are on a budget and the kid doens't care about slight issues, the $40 KO would be the better option.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Optimus became the leader of the Autobots for a time, then disappeared, leaving his people to be ruled tyrannically by Megatron.Targetmasters Megatron never stopped seeking out his old foe, rewarding any of his troops that provided him with information that could lead to Optimus's whereabouts. The Golden Boys As for the Autobots, they were uncertain exactly as to why Optimus had disappeared; some believed Optimus had simply abandoned his troops, while other believed he was fulfilling some greater purpose and would return to them in their hour of need. Ultimately, it was Snake-Eyes and Duke who found the Autobot leader, lost in the void between dimensions. Form Follows Function There, the three of them became ensnared by the Quintessons. They escaped the extra-dimensional entities' mind-probe and made their way back to normal space. En route, Optimus learned from Duke that Bumblebee had traveled to Earth and met his demise there. His human companions went off to help their friends on Cybertron, while Optimus headed for T.H.E. P.I.T. on Earth, eviscerating numerous Coltonbolt satellites as he entered the atmosphere. Everybody Hates Metroplex
A gold chrome remold of the 2007 movie Leader Class figure by Hasbro Hong Kong. Limited to 88 units, with only 10 released to the public at the 2008 Animation and Comic Show convention; all of which were sold only to the first 10 people to spend more than HK$3,000 at the Hasbro booth. Because the figure is permanently fixed to the trophy base, it is no longer transformable.
This release is a redeco of the Cyberverse Commander Optimus Prime figure, with a lighter gradient paint job that lacks the flames, and with Optimus sporting a G1 insignia. Instead of his jetpack and guns, he comes with his trailer/Armored Weapons Platform, which can transform into a base and exo-suit. The trailer itself features movie-style insignias.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).