Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
Optimus had Bumblebee and Huffer plant false information to mislead the Decepticons. As the Autobots were in need of a new power source, he sent Cliffjumper to find Doctor Heath Blaisedale and had to apologize to the doctor after Cliffjumper kidnapped her. Persuading her to help them, the Autobots traveled to the solar plant to make use of her solar reactor, only to find the Decepticons were already planning to attack it. While the other Autobots re-energized, Optimus protected them from an attack by Starscream, Thundercracker and Skywarp. Ravage abducted Blaisedale as a diversion, forcing Optimus to lead a team and rescue her. When the team returned, the plant was already under attack and Optimus helped the Dinobots drive them off. Unfortunately the Dinobots totaled the plant in the process, and Optimus promised Blaisedale the Autobots would help her rebuild. In return, Blaisedale organized a meeting with the President of the United States so the Autobots could forge an alliance. Sun Raid (Listen 'n Fun)
When Sideswipe was accused and convicted of destroying the Nova Suspension Bridge, Optimus was infuriated that one of his own Autobots could commit such a heinous act. Optimus was tasked to hunt down and deactivate Sideswipe, though the task proved to be easy as Sideswipe did not run, hide or resist. After Optimus had deactivated Sideswipe, he was approached by Prowl, who pointed out that Sideswipe's actions made little sense, as he had committed the crime in broad daylight before many witnesses. Agreeing that the Decepticons might be behind the situation, Optimus allowed Prowl to take a team of Autobots to Carob Island to clear Sideswipe's name while Optimus and Jazz stayed behind to continue working on human/Autobot relations. Prowl returned with evidence that it was indeed a Decepticon-controlled clone of Sideswipe that had committed the crime. Optimus then presumably reactivated Sideswipe when his name was cleared. Deadly Paradise
Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
The actual events of the Autobots and Decepticon coming to Earth were never printed by Dreamwave comics, but flashbacks of the events are printed later. These flashbacks suggest that the Autobots allied with humankind and defeated the Decepticons at the turn of the century. They planned to return to Cybertron aboard the newly constructed Ark II, but the ship was destroyed as part of a military conspiracy to take control of the transformers. A terrorist organization, run by the enigmatic Lazarus, was able to seize control of several of the Transformers that fell back to Earth while the U.S. military was occupied with locating Prime's body. Before his departure, Prime had entrusted a small portion of the Matrix to Spike Witwicky, who was forced by the product chief, General Hallo, to use it to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades, and then faced off against Megatron in San Francisco.
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.

In search of new energy sources, Optimus led a team to central South America. When they spotted Mount Sheelah, their two human friends John and Tim Gordon explained volcanoes, and, believing it to be of possible use, the Autobots went to examine it. During a battle with the Decepticons over the volcano, Optimus was convinced by the two humans to retreat, ultimately saving them when Mount Sheelah erupted. Terror of Mount Sheelah After discovering that the Decepticons were kidnapping humans, Optimus sent Bumblebee to scout the Decepticon base. When Bumblebee returned with the Decepticons' global crystal, Optimus was able to use it to blackmail the Decepticons into letting the humans go. Bumblebee to the Rescue
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984 A.D., a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate headsculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. A smaller laser is seen when it flips out with the sword. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime leader class based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Universe Optimus Prime is a redeco of the Robots in Disguise Scourge Spy Changer toy. He replaces most of the black plastic with predominantly red and blue, with silver for detailing, with an overall deco making him resemble the original Optimus Prime. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Many who received their first LEGO set in the early 1990’s are now adults looking forward to buying a LEGO set for their first child or for themselves. When we are younger, we do not fully understand how money works. We do not realize that a large LEGO set can require hours of work to earn. We only know what we want. I would wager that it isn’t until our first jobs that we can fully appreciate the value of money. We all wanted the large sets as kids and we didn’t realize how hard our parents had to work for them.
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
The first toy in TakaraTomy's United toyline is a redeco of the War for Cybertron Deluxe Class Optimus Prime, transforming into a Cybertronic "armored truck". As has been TakaraTomy's wont of late, he now sports a metallic red paint job, with brighter pink paint applications and cooler grey parts, and features several additional paint details to those present on the Hasbro figure in the form of black chest windows and pink lines on his face mask. His rifle transforms as well, folding and plugging into the roof of the vehicle mode. The rifle can also peg into his forearms, and, in its compact configuration, can attach to his shoulders via peg holes on the backs of his front tires or stored behind his back in robot mode.
As the Universe War began, Optimus Primal was shown a myriad of Transformers from across all timelines that he could choose to recruit into his Children of Primus in the battle against the Minions of Unicron. One such possibility was a Transformer who was either Thunder Clash or Optimus Prime, but, regardless, Primal chose Depth Charge and Rhinox instead. Homecoming
Optimus and Wheeljack returned to Autobot HQ after an absence to find Grimlock had taken leadership. Though they failed to resist him, he soon bored with leading the Autobots and let Optimus take command again. Me, Grimlock, King Impressed with Bumblebee's success as team leader, Optimus assigned Pipes to lead a team. The B-Team Part Deux With Optimus badly damaged and without the Matrix, the Autobots were driven off Earth and sought refuge on Cybertron. Once Optimus had recovered, he put together a team which returned to Earth and retook it from the Decepticons, with Optimus badly damaging Megatron in combat. All Hail Megatron
Hasbro has had a bit of a strange relationship with Bumblebee. In the early days (we’re talking mid-’80s) he was hugely popular, both on the TV show and as a toy, and Hasbro was sure to capitalize on that. As a result, there were more different Bumblebee toys during that time and into the early ‘90s than for any other Transformer. Of course, the alternate Goldbug version helped boost the number of toys they could make.
The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.
He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
The two sides found themselves equally matched until the Constructicons merged into The Devastator. The tables were turned once more when the Dinobots appeared, and mercilessly slaughtered the Constructicons. The Decepticons' plan foiled, Optimus decided that the Autobot-Decepticon war had come to an end, despite Megatron's protests to the contrary. He and his Autobots then drove away victorious. Battle for Earth
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.
In another possible sequence of events, the trio returned to Autobot headquarters to relate their findings to Optimus Prime. The Decepticons planned to use a Destruction Beam to create a fault line near Center City, which would in turn be exploited by Rumble’s earthquake-inducing abilities to destroy the entire area. The Autobots then decided to split up in two groups, one to attack the Decepticons’ fortress, the other to stop Rumble in Center City. Optimus headed the lead team.

Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.
Realizing that the planet is dying, Optimus orders a mass evacuation of all Autobot cities, but many transport ships are destroyed by the Decepticon satellite Trypticon, under orders from Megatron that no one shall leave the planet. He orders the Aerialbots Jetfire, Silverbolt and Air Raid to fly and destroy Trypticon. The aerial trio manages to destroy Trypticon's jet pack and send the Decepticon behemoth crashing into Cybertron, where Optimus Prime and the Autobots band together to narrowly defeat him, sending him plunging into a pool of raw energon. Optimus and the remaining Autobots volunteer to stay and defend Cybertron from Megatron for as long as possible while the rest evacuate the planet. He commissions a massive vessel known as "the Ark" to transport the remaining Autobots into space when the time comes.

A redeco of the Dark of the Moon Deluxe Class toy, this Optimus Prime has large portions of his body, mostly his truck parts, vacuum metallized silver, and his light-piped eyes were neutered by blue paint. He comes with a redeco of Generation 1 Rampage's sword, which can be wield by his 5mm-compatible hands (Although not shown in the instructions). As his body, legs, and front truck kibble were chromed, care must be taken while transforming, especially with the shoulder kibble & the bottom leg's posts (This can be amended if you slightly widen the holes with 3mm hand drills). As with the original Dark of the Moon Deluxe Class figure, the instructions did not mention about forming the sleeper part until step 10, the pinky finger prevented the sword to peg down through his hands, and of course: his truck mode can attach with the Armored Weapons Platform included in the Chronicle or the Movie Trilogy Series figure. This figure has slightly loose shoulder joints.

Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation 1 Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie... because there are so many long-nose cabs driving around Mars. Yeah.

The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.

Based upon the "Protoform" (Cybertronian) appearances of the Transformers in the Movie, Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. A flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail. The bottom of the vehicle has small wheels to roll the toy across smooth surfaces. Oddly, it has NO automorph gimmick at all, a feature most main-line figures have.
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.
LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).

Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).

This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
MP-10 Convoy, advertised as a "perfect new model" on its packaging, is an entirely new tooling of Generation 1 Optimus Prime. Convoy is now smaller, making him more in-scale with other recent Masterpiece toys, such as Rodimus, and comes with a trailer and various accessories. While the front of the vehicle mode's cab is an accurate depiction of a mid-to-late-1980s Freightliner FLT cabover, the back half, (which is, as usual, made out of Convoy's legs) is much larger and robot-leggier in proportion. (So much that they sculpt a ladder on each side.)

Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. Unlike in all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
The project was crowd-funded through Japanese crowd-funding site Makuake[11]. For 5,400 yen, contributors received an INFOBAR Optimus Prime, or for 16,200 yen, received INFOBAR Optimus Prime, INFOBAR Megatron and INFOBAR Bumblebee, the only way to obtain the last two items. The project received one million yen in the first 24 hours, ultimately topping out at over 32 million yen.
Billed on his packaging as "BIGGEST Optimus Prime Toy!", Ultimate Optimus Prime consists of an articulated tractor-trailer. The cab can transform into a "normal" Optimus Prime on its own, roughly equivalent to a Voyager in size and complexity, though with a lower degree of screen-accuracy than most large Optimus toys. Prime has 5mm fist holes, as well as additional 5mm ports on his front wheel wells and both sets of external fuel tanks. Four of these remain available in robot mode. The trailer has twelve more 5mm ports. Despite this, the toy comes with no weapons scaled such that the cab-only robot can usefully wield them.

This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.
I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.
The lowest priced toys in the Armada line were three-packs of Mini-Cons. Each larger price point consisted of an Autobot or Decepticon who came with a Mini-Con partner. Mini-Cons could be used to unlock a variety of features on each larger robot, such as firing weapons, electronic lights and sounds, or alternate modes. Some three-pack Mini-Cons combined into other forms or had additional features. According to the storyline, Mini-Cons also enhanced the power of other Transformers, giving incentive to collect as many of them as possible.
×