Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. It is interesting that, unlike all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.

Optimus Prime also appears in the text-based fiction Dungeons & Dinobots. He commands the Autobots to attack the Arch-Ayr fuel dump. The attack is thwarted when the main Decepticon forces are augmented by the Mayhem Suppression Squad. When Wheeljack attacks both the Autobots and Decepticons with a massive force of drone Dinobots, Optimus offers to allow the outcast Autobot scientist to rejoin the Autobot ranks if the Dinobots destroy the Decepticons. The Dinobots prove unstable and go on a rampage, attacking everyone, including each other. Optimus punishes Wheeljack by having Ratchet painfully reformat him for Earth mode and assigning him to the Ark repair crew on the advice of Side Burn. He punishes Blurr for allowing his heroic Decepticon cousin, Crasher, part of the Mayhem Suppression Squad, to live. When Grimlock returns to the Autobots, Optimus lets him live because the Dinobot has gained useful intelligence and helps in work on the Ark.

Prime's personality had been copied onto a floppy disk by Ethan Zachary, the technician running the game. He employed Prime in various video game scenarios he developed. Prime's damaged mind led him to believe that he himself was a video game character and, in an attempt to bring him back to life, Goldbug, Joyride, Slapdash, and Getaway took the disk to the planet Nebulos. They built a new body for Optimus Prime and upgraded it with the ability to combine with the trailer to form a larger robot. In an effort to keep Transformers off their planet, the Nebulans had poisoned their fuel. The sensation of dying, however, convinced Prime that he was truly alive and not a game character. To save his life, the Nebulan scientist Hi-Q bonded with him, creating Powermaster Optimus Prime. A UK story set around the same time in UK #198, Prime returned to Earth and tried to rekindle his feeling for the planet. After a battle between his forces and an advance force from Cybertron ruined a small town's Christmas festivities, he realized that bringing the Transformers to Earth was far worse than anything his troops could have done and vowed to protect its inhabitants from Decepticon aggression.[6]


Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.
Optimus and Prowl received message from Skyfire of a coal transport in Africa, and discovered Megatron was using human slaves. Megatron detonated his coal mines with the world's largest explosion, killing the humans and forging the world's largest diamond — that he would use to as a lens for a satellite to focus the Sun's beams, melting the Rocky Mountains! Prime ordered Skyfire to attack the satellite, and Ratchet to build a square mile panel of metal to deflect the beam, blowing the satellite up. Satellite of Doom The Decepticons attempted to drain the Prudhoe Bay oil reservoir, causing volcanic eruptions and Russia to approach America, accelerating tensions between the countries. Optimus ordered razon gas to be pumped into the reservoir, returning the oil below and raising the Decepticons' aquatic drill. When Continents Collide
If you're still on the fence about Masterpiece MPM-5 Decepticon Barricade, or are considering purchasing Masterpiece MPM-6 Ironhide (which is also currently available), now might be a great chance to grab this Amazon.com exclusive figure from Hasbro. As of this writing, MPM-5 Barricade is currently on sale at Amazon.com for $52.13, which is 35% off the regular retail price of $79.99. Part of the special deal is that he's also available for "FREE" One-Day shipping for Amazon Prime members. Order - Read More

G1 Convoy comes with two sets of fists, each pair featuring differently-shaped fist holes: one pair with square holes to hold the figure's "Convoy Gun" (as his ion blaster is called), and the other with round 3mm-compatible holes to hold the spring-loaded translucent blue missile launcher (a generic accessory also available with Robotmasters Beast Megatron and Beast Convoy). The fists are swapped out by simply popping them out of the wrist-hinge that holds them in place; the figure also includes an energon-axe that can be inserted into the wrist instead of a fist.

A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.


Oh, also, I should add that I would like to see if this trend is the same for specific themes, or just over all themes. Although I would guess that the individual themes would show the same general trend you discuss here, one reason individuals might believe in the “price increase fallacy” might be because of the individual themes they support. But again, I think that if you do this, you will find the themes fit the trend as well. If you are looking to go into the numbers more, this might be an interesting area to investigate.
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.
The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
According to IDW Publishing's Transformers: Movie Prequel comic book, Optimus Prime and Megatron co-ruled Cybertron until Megatron began a war for control of the Allspark. Optimus formed the Autobots, a militia of civilian transformers sworn to protect the Allspark. Optimus fought back, willing to doom Cybertron itself to deny Megatron the Allspark. His reasoning was that a new homeworld could be rebuilt with the Allspark once Megatron was no longer a threat. He entrusted Bumblebee with the task of distracting Megatron at Tyger Pax long enough for the Allspark to be sent into space.

If Powerglide did not heed Optimus orders, he indadvertedly caused the water supply to be poisoned anyways. If however, Powerglide listened to Optimus’s orders, the Autobots attempted to lure the Decepticons away from the reservoir and into some nearby woods, where the Autobots would have some cover against the Decepticons. Finding themselves under heavy fire before they could reach the treeline, the Autobots were forced to fight back in the open. With Autobots falling beside him, Optimus gritted his teeth and took careful aim at the poison containers the Decepticons were carrying. After taking out both of the planes carrying the poison, Optimus continued to battle Megatron and his Decepticons until nightfall, until the Autobots were finally victorious.
The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
"Convoy Last Production" was the final re-use of the Masterpiece toy mold before it was at last retired after numerous re-releases and redecos. The figure is essentially identical to the original Japanese MP-1 release, aside from a slightly brighter red, and the addition of the words "LAST SHOT" in Transformers typeface molded into the small of Convoy's back, hidden beneath its headlight-flaps in robot mode. Lacking the trailer of MP-4, the figure instead comes with a redecoed version of the electronic base included with Hasbro's "DVD Edition" of the figure from five years prior, which now features a collection of sixteen soundbytes of Convoy delivering famous lines from the Japanese version of the Generation 1 cartoon, recited by the character's original Japanese voice actor Tesshō Genda. The base was promoted as containing a hint as to the identity of the next Masterpiece toy; as it would turn out, this was a new version of Convoy himself (see below), foreshadowed by a sound clip on the base which played only intermittently, and which had Convoy announce that he would "soon be reborn".

Optimus Prime's character returns in Transformers: Revenge of the Fallen. He leads the Autobots as part of NEST in seeking and destroying remaining Decepticons on Earth. At the beginning of the film, the massive Decepticon Demolishor is rampaging through Shanghai, China, and Optimus parachutes out of a plane to take him on. Before he is killed, Demolishor tells them that the Earth is "not theirs to rule" and that "the Fallen shall rise again". At the NEST base, Optimus tells Theodore Galloway that they do not know what The Fallen is and that if they are asked to leave Earth, the Autobots will comply. When the remaining Allspark shard is stolen, Optimus asks Sam for his help in convincing the Earth's leaders to allow the Autobots to stay, but Sam refuses. When Megatron is resurrected and Sam, Mikaela and Leo Spits are kidnapped, Optimus and Bumblebee attack the Decepticons holding them. Optimus fights Megatron, Starscream, and Grindor on his own to protect Sam in a forest. Though he manages to kill Grindor and rip Starscream's arm off, Optimus is ultimately killed by Megatron. His last words were for Sam to run. His body is taken to a military base where Galloway orders the Autobots to bring his body back to Diego Garcia. Meanwhile, Sam hears from Jetfire that "The Fallen" is an ancient Prime and that only a Prime could kill him. He also said that the Matrix of Leadership may be able to revive him. After a long battle with the Decepticons in Egypt, Sam resurrects Optimus using the Matrix, but it is subsequently stolen by The Fallen. Because Optimus is still weak, Jetfire offers to sacrifice himself to help. Ratchet and Jolt convert parts from Jetfire into a jet mode for Optimus. Optimus flies over to the pyramids and destroys the Sun Harvester. After severely damaging Megatron, he kills The Fallen, forcing Megatron and Starscream to retreat. At the end of the film, he thanks Sam for reviving him and again transmits a message to space, hoping to find more Autobots.
The Monster XL also features not one, but TWO barrels with 6 different nozzles per barrel. That adds up to about 36 different ways to put out your best friend's eye. The ludicrous weight and the fact that it takes 43 fucking pumps to get the water up to pressure offer up reasonable disadvantages, but since water gun fights are always half water gun fight and half "who brought the biggest dick" competition, none of that really matters.
In the past 80 or so years, the yo-yo has seen some pretty mundane innovations, such as a ball bearing axle for better spin efficiency and the addition of flashing lights, to name a few. But finally, someone has rolled up their sleeves and is ready to fuck shit up all over the yo-yo world. Meet the ReGEN; half yo-yo, half MP3 player and just a pinch retarded.
A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.
Although the animated series ended in the U.S. after The Rebirth, Optimus Prime continued to appear in animated sequences of Transformers toy commercials, progressing from Powermaster to Action Master. He even made an appearance as a computer-generated Combat Hero. Many episodes of the series were re-aired to promote Transformers: Generation 2. During these sequences, computer-generated scenes featuring key G1 characters are borrowed from Generation 2 commercials to serve as opening, closing, and commercial bumpers. Optimus Prime is shown in the opening and closing fighting Generation 2's Ramjet.
Entertainment Pack Optimus Prime is a slight redeco of the SDCC figure, with some deco differences between the SDCC release; this version has gray windows instead of blue and is missing some of the silver deco on the helmet and roof/feet, as well as the yellow paint on his lights. His midriff is also darker. Optimus also comes with a similarly-scaled Megatron and PVC figurines of Jack Darby, Miko Nakadai, and Raf Esquivel.
Part of the first wave of Beast Hunters Series 3 Voyager Class toys, Optimus Prime is functionally an upsized copy of his Beast Hunters Series 3 Cyberverse toy, though with certain sculpted details based on his larger toys, the replacement of his ball joints with more robust ratchet joints, the addition of thigh swivels, and various deco differences. As a result, his complexity is lower than in his previous Voyager Class toys, but he ends up being much, much more massive.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
×