In reorganizing the company, LEGO became more efficient. The data shows that they have been able to standardize costs and it is likely that they were able to hedge the price of plastic against future price fluctuations. In protecting their business, they have also been able to normalize prices for their customers. A stable price is good for everyone; it helps LEGO ensure that future production costs are budgeted for and it helps the consumer manage their budget. This allows LEGO to protect and grow its market share.
Separate from the retreading and cartoon accuracy and backpack stuff one persons comment hit home for me as to why I will buy this new Optimus. It likely has the hyper articulation that they did in Sunstreaker and Megatron. So I will buy it for that to match Megatron. Let’s face it. mP-10 has a lot of nice things but even when it first came out I thought it had gorilla arms compared to mp-01.
Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.
Part of the fourth wave of Prime: Beast Hunters Cyberverse Commander Class toys, Beast Blade Optimus Prime is a jungle-themed green and blue redeco of his Series 3 Cyberverse Commander Class toy, coming with a new Battlewing Shield accessory in addition to retaining both the Thunder Lance and Star Saber. His shield can open up to form wings, and can be pegged onto the ridge on top of the vehicle's cage compartment, or mount onto the screw-hole on his, er, robot butt.
Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.
Part of the first wave of Bot Shots Series 1 launchers, this repaint of Optimus Prime comes with a large trailer that pops open to form a battle station with a spring-loaded launching platform. He appears to have the same plastic colors as the single release, and the same set of paint operations, but his paint is done in different shades, having glossy dark blue paint and glossy bright red paint. The black part of his launcher is sculpted to look vaguely like the repair done that is part of Generation 1 Optimus Prime's repair bay.
We may be four days in 2019, but that certainly isn't too late to post a special New Year's message from everyone's favorite yellow Volkswagen Beetle, right? To promote the upcoming Bumblebee Movie premiere in Japan in March (that's right, March!) a New Year's video message from Bee himself has been posted to YouTube and Twitter. What the actual message says we don't know, but we'll update when we do. The message is then followed by a full scene clip (in English with Japanese subtitles) where - Read More
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. 
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Garry Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.
This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.
Prime: First Edition Matrix of Leadership Optimus Prime converts from robot mode to his truck mode. He comes with a gun than he can wield with his hands, as well as peg onto his hitch in vehicle mode, with different pegs for either configuration. Similar to a previous Optimus Prime toy, he features some faux-kibble in the form of his actual windshield chest being covered by sculpted panels featuring his characteristic windshield-chest. His arms are slightly longer than his original design's arms.
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
The first Unicron Trilogy Optimus Prime toy transforms into a longnose truck cab of made-up model. His clear-plastic smokestacks can detach and form a double-barrelled pistol that he can hold in robot mode, and a button on top of his head causes his mouthplate to jiggle up and down as if he were talking (the irony being that while this was a familiar trait of G1 cartoon Optimus Prime, in the Armada animated series, this Prime's mouthplate remained static when he talked). He can also hold a large cannon that is stored within his trailer, and his chest flips down to reveal a (non-removable) Matrix of Leadership. He is packaged with his Mini-Con partner Sparkplug.
A non-transforming but highly articulated Optimus Prime action figure(ine), Revoltech Convoy uses the Revoltech "revolver joints" for maximum poseability. Convoy comes with a Matrix and ion blaster accessories, as well as a few alternate hands. His sculpting is explicitly in the style of Pat "serfdom" Lee's interpretation of Optimus Prime in the Dreamwave Generation One comics, but due to physical constraints has no lack of perspective.
A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.
Articles to be expanded from December 2011 Articles with invalid date parameter in template All articles to be expanded Articles lacking in-text citations from December 2009 All articles lacking in-text citations 3H Enterprises characters Action Masters Autobots Convoys (Transformers) Devil's Due characters Transformers automobiles Fictional characters introduced in 1984 Fictional commanders Fictional robots Film characters Fun Publications characters Go-Bots Triple Changers IDW Publishing characters Maximals (Transformers) Powermasters Primes (Transformers) Robot superheroes Spy Changers Transformers Alternators Transformers characters in video games Transformers: Energon characters Transformers: Prime characters Dreamwave Productions characters Optimus Prime
Like all Predacons Rising releases, the Optimus Prime/Predaking two-pack was exclusive to Target stores in the United States and Canada and to Tesco stores in the UK, and is also supposed to be exclusive to Carrefour elsewhere in Europe (presumably in France and/or Spain, though there have been no sightings as of yet). It has also been found at Rossmann drug stores in Germany and Ripley stores in Chile and popped up at BigW stores in Australia much later, in mid-2014. Also, like all Predacons Rising multi-pack redecos of Beast Hunters Cyberverse figures, the Cyberverse logo is nowhere to be found on the packaging.
Optimus Prime and his troops lay deactivated on the Fera Islands for three million years until G.I. Joe stumbled upon them one day in 1939. The Line The Autobots were reactivated by a repair drone and given new disguises, with Optimus Prime being reformatted into an unknown World War II-era human vehicle. He explained to Duke who they were, and learned that Megatron's Decepticons had been reactivated a year prior, and were currently wreaking havoc on Europe along with Cobra. While hesitant at first, Optimus Prime soon joined G.I. Joe in their mission to destroy Cobra and the Decepticons. Transformed After commanding the Aerialbots to get the Seekers out of the way, Prime advanced across the Fera Islands, but met resistance in the form of Rumble. Trial by Fire
Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
Optimus Prime narrated the events of what happened before the Ark crashed on Earth. He became the new leader of a long line of Autobot leaders via the discovery of the Matrix. On their quest for more Energon, the Autobots were chased by Decepticons to the planet known as Earth and crashed on it. When they emerged from the Ark, Optimus Prime scanned his truck altmode, stating that the war would not end on Earth. Action Blast 1
Virtually every toy in this list has a scannable insignia sticker on it. For Hasbro releases, it temporarily unlocks that toy as a playable character in the Robots in Disguise mobile game, and can only be scanned once per day. TakaraTomy releases simply check that off on their mobile app's collection list. It's honestly quicker and less redundant to say which toys don't have this feature. Meanwhile, scanning the Combiner Force toys' insignia stickers gives the player Tickets, which can be spent by giving them to Cryostase via the main map menu.
There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.
A Voyager class figure that transforms from semi-trailer truck to robot. Head features retractable face plate. The figure's main gimmick is a spring-loaded mechanism that spins the lower torso during transformation to robot mode. Trailer detaches and transforms into a giant Ion Axe or jet pack. Prime's gun can be filled with a small amount of water. Some variants of the figure come with the Autobot symbol printed on his left shoulder while others do not.
Q-Transformers Optimus Prime is a tiny super deformed toy based on the Alternity Convoy design, transforming into a Nissan GT-R R35, though his legs retain the traditional blue truck bed motif. The English name on the packaging refers to him as just "Optimus". He comes with a code for unlocking "GTR Optimus Prime" as a playable character in the Q-Transformers: Mystery of Convoy Returns game. Standing at only slightly less than one inch and a half, this is actually the smallest transforming Optimus Prime ever made, which is a fairly impressive feat considering the surprising amount of detail in sculpt and paint apps.
Optimus Prime is composed of two parts, his truck cab and his trailer. His new truck cab is reminiscent of the original Optimus Prime truck cab, but is constructed entirely of plastic, lacks vacuum-metalized plastic and has no clear windows. It also transforms differently in that the front of the truck is no longer the robot mode's chest. His chest is now formed out of the truck's cabin rear, styled after his cartoon appearance. He is armed with two long black rifles, based in part upon his cartoon rifle.
The all new 2006-2007 Classics line featured characters from the original series in updated forms. Hot Rod (now called Rodimus due to trademark reasons) was in the first wave of Autobots along with Optimus Prime and Bumblebee. Due to most of the Classics lacking visible Autobot and Decepticon insignias, this figure lacks the distinctive Autobot symbol seen on the chest of all other versions of Hot Rod/Rodimus, to which fan companies have responded to with alternative stickers. His vehicle mode is based on an obscure Japanese Supercar, the Dome Zero, manufactured by DOME Co. Ltd in 1978.
For Universe, a redeco of the Armada Super-Con Optimus Prime in more Generation 1-inspired colors was released in a Sam's Club exclusive five-pack alongside Runamuck, Longrack, Buzzsaw, and Blurr. Optimus was the only toy in the set different from the original releases. He came with a translucent red version of the remolded style of Cyber Key previously included with this mold's release during the Cybertron line, featuring a Powerlinx port to activate his punching gimmick.
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
Like the larger First Edition figure, you can actually separate the robot mode from his vehicle shell, displaying both of his modes at once... albeit unlike the First Edition figure, this tweak could sacrifice the even stability between those two separated figures. Some of the pieces like the legs/rear wheels are particularly difficult to separate.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.
The Happy Meal version of Energon Optimus Prime features a very similar transformation sequence to his larger figure, though his limited articulation means that his shoulder insignias aren't visible in robot mode when his arms are facing forward. His torso is hollow to contain his electronic "Energon Cube" accessory, which generates effects when activated by remote control. This remote is in the form of the Mini-Con jet Wreckage, and can mount on the top of his cab in truck form.
Some time later, as the war raged between Autobots and Decepticons on Earth, Optimus had requested the Aerialbots as reinforcements from Cybertron. Though they nearly defected to the Decepticons, Optimus was able to secure the Aerialbots as allies. Later, when a power plant had to be evacuated of its human workers due to the fear of landslides, Optimus posted Denfensor at the location to secure its protection. Optimus then drove off to check up on the rest of his troops who were aiding in the area’s evacuation. Though he passed a military convoy heading towards a plant, he thought nothing of it, unaware that they were the newly created Combaticons in disguise. Optimus then reached the Ark, and from there opened communications with the Aerialbots. Optimus had someone come into the know that the Decepticons were moving in towards the plant. He watched from afar as Defensor and Superion fought Menasor and Bruticus, wary to send more Autobots into the fray while these titans wreaked havoc onto the battlefield. Optimus allowed himself a smile when the Aerialbots and the Protectobots proved themselves superior teams to the Decepticons’, though at the back of his mind, he was wary. After all, Megatron himself had chosen not to add his considerably weight to the battle... The Special Teams
Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
Featuring a complex transformation, essentially the front and back ends of the truck fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his pricepoint has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, held in place by a simple clip.) Optimus' final Automorph, located in his torso, is activated by flipping the silver lever on his stomach activating a series of spring-loaded actions where the truck windows are pushed apart, and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth. With the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
Optimus battled alongside the Alternity to fend off the beast, when unexpectedly, Megatron overwrote the beast's higher functions with his own. At first, it seemed that the Hytherion had been killed, but a newly empowered Megatron (in two bodies) appeared and declared that, now possessing a power that rivaled the Alternity's, he challenged his opponents to take him on or see the multiverse itself burn. To Mega Therion
In "Endgame" 2-parter, Ratchet builds Optimus a jetpack attachment to help in the coming battle against the Decepticons. After some initial difficulty, Optimus is able to get the hang of the device, only to be shot down by Starscream's female clone, Slipstream. Though Ratchet urges Optimus to use the Magnus Hammer, he is reluctant to do so, given his past with Ultra Magnus. In the end, he wields the weapon as the Lugnut-controlled Omega Supreme clones land on Earth. During the fight, Optimus manages to master the Magus Hammer's power in order t overwhelms Megatron to the point of being acknowledged by name. After a devastating battle, the last remaining Omega clones self-destruct due to Starscream's intervention. With Prowl's sacrifice, the Allspark is rebuilt into one as it forms a barrier around the Omega clone, along with Optimus and Megatron. Prowl's spirit pulls Optimus from the bubble just as the clone self-destructs with Megatron still trapped inside. Prime laments Prowl's passing before defeating a heavily damaged Megatron and sparing him the deathblow, saying that Megatron does not deserve the "easy way out". He and his team return to Cybertron with Omega Supreme, the captured Decepticons, and Prowl's body and are greeted as the hero he had wished to be so long ago. The reconstructed Allspark, having a structure similar to the G1 incarnation of the Autobot Matrix of Leadership, is hung around his neck.
A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.
Optimus Prime was blasted into pieces by Dragon Megatron. Beast Wars Metals #5 Fortunately, his spark remained perfectly intact—in the remains of his Matrix-shaped spark chamber. Megatron was going to destroy Prime's spark, but Cheetor (now in his Transmetal body) saved it. Prime's spark was eventually swallowed by Optimus Primal, who was upgraded into Optimal Optimus by doing so.
Categories: Articles in need of imagesUnreleased toysCharacter stubs missing toysAge of Extinction AutobotsBattle Masters AutobotsBumblebee AutobotsConstruct-Bots AutobotsCostco exclusivesDark of the Moon AutobotsKmart exclusivesMasterpieceMovie AutobotsNESTPlatinum EditionQ-Transformers charactersRevenge of the Fallen AutobotsSam's Club exclusivesStudio SeriesTarget exclusivesThe Last Knight AutobotsTitanium SeriesToys "R" Us exclusivesTransformers (2010) AutobotsTriple ChangersWal-Mart exclusives
Screen Rant is exclusively announcing that the Transformers brand will join the pop culture series of toys with figures from Star Wars and Marvel and you can get your first look below. Hasbro relaunched their Mighty Muggs line in January 2018 with by announcing plans for over 50 figures from Star Wars and Marvel, with each collectible figure including the new push-and-turn head feature that changes their facial expressions. And yes, this new feature applies to your favorite Cybertronians too!
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
Henkei! Henkei! Transformers Convoy is a redeco of Classics Voyager Class Optimus Prime. He features a significantly altered colour scheme, generally to make the toy more closely resemble his appearance in the Generation 1 cartoon and the original toyline. His truck mode features less silver paint striping, but compensates with a vacuum-metalized grill/fender area. In robot mode all of his previously grey plastic is replaced with red plastic, with a majority of it being painted silver, chromed, or painted gunmetal gray. He features a different shade of red, blue, and clear blue plastic than the Classics version. Since Henkei! toys do not feature a heat-sensitive rubsign, Henkei Convoy has two Autobot sigils tampographed onto his shoulders.
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.
The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).
The original Ultra Magnus figure has been reissued and redecoed several times down the years, and this article strives to list each edition of the figure under its own heading. The first alteration to Magnus, however, was a running change made while he was still on shelves: Originally, his tires were made of rubber and he sported paint on both his small and large robot heads, but this version was soon replaced with one featuring plastic tires and no paint on either head. In addition, the clear yellow plastic that formed his windows was removed from the cab, leaving just holes instead; and his thighs and fuel tanks were left white, as opposed to the vacuum metalized chrome ones of the original release.