Prime's new trailer is essentially a heavily armed version of the original, with two double-barreled heavy laser cannons mounted on two arms with visible fists. The rear has a fold-down ramp to allow the storage of a smaller transformer, or perhaps spare accessories. The trailer can be transformed into a Powermaster battlestation that can allow other Powermaster engine figures to man the heavy laser cannons.
The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
Punch reported back to Optimus on what he had learned about the Decepticons as Counterpunch. Mainly, that they were planning on attending BotCon 2010. Optimus then turned to Teletraan I for more information about BotCon. Upon learning that special honors would be held for him at the convention, Optimus led his troops to BotCon once more. BotCon 2010 Promo
I agree with Aidan but would expand on his point. It’s not just that the sets seemed bigger; they were. As the relative complexity of sets has increased, so too has the piece count, but there has been an overall decline in the size of the models due to increased build complexity and a corresponding reduction in size of the pieces required to create such detail. The negative affect on perceived value in this is apparent, though I would argue, misguided when one considers the build quality and detail of new and recent sets.
Although he was weak and low on energon, Prime made a last-ditch effort to save the day when he rammed through the wall of Megatron's energon-producing lab. G.I. Joe vs. the Transformers #5 After a quick recharge, Optimus single-handedly smashed the Decepticons, pounded Megatron to the ground, and ripped his fusion cannon off his arm. Prime then teamed up with the Joes and used Megatron's cannon to shoot down the SPS Satellite that had gone rogue and was destroying the island.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
Part of the first wave of Prime: Beast Hunters Series 3 Cyberverse Commander Class toys, Optimus Prime is an all-new mold. He now transforms into a monstrous, flat-nosed truck with spiky fenders at the front and a cage compartment at the back, and comes with the Thunder Lance and Star Saber. Each of the weapons features two differently-placed 3mm posts, allowing them to be held by his hands, or mount onto two ports on the rear vehicle sides, as well as allowing the lance to additionally be used as a pressure-fired missile launcher.
If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
Commemorating the death of Optimus Prime in The Transformers: The Movie, this set contains a special version of the original Optimus Prime figure with show-inspired translucent blue windows. It was packaged with Ligier and Alert, in an apparent homage to the similar Diaclone "Powered Convoy DX" giftset that packaged the "Powered Convoy" version of the Optimus mold with figures using the molds of Ligier and Alert.
Doug Smidebush, Lior Keinan , Kelvin Nduka, Thad Standley, Nolan Zak, Adam Franks, Stephen Brown, Loren Roberts, Matt and Nykki Boersma, Tom Morgan, Jack Everitt, John Kovalic, Seiler Hagan, Jess Hart, Will James, Christopher M. Kelly, Roberto L. Vargas, Michele Hall, Chuck Lawton, Ismael Schonhorst, (There are those who call him) Tim, Vladimir Weinstein, Randiman Rogers, Robert Booth, Henry Roenke, Kevin Culp, W. David MacKenzie, Nicholas Richards, John Idlor, Michael Fox, Rob H., Matthew Cody, Dan Callahan, Patrick Kohn, Seth Phillips, Kevin Korpi, Ben MS, Monica, Mark Gonyea, Pharlain Ross, Derick Larson, Furstarter.com
Early in this new series of encounters with Megatron, Red Alert contacted the Autobots on Earth and asked for Optimus Prime to join then on Velocitron. Ransack and Crumplezone tricked Hot Shot and Dirt Boss into believing that a race between them would determine which of them would be allowed to race Override for the Planet Cup. During the race, Ransack and Crumplezone caused a rockslide that buried Hot Shot. Hot shot was saved when Optimus Prime, Vector Prime, and Landmine arrived, but Optimus was upset that Hot Shot had become involved with the locals. Clocker and Brakedown were eager to help the Autobots. After being unable to obtain the Planet Cup from Override herself, Optimus Prime endorsed Hot Shot's plan to win the cup in a race with the aide of the other Autobots. Ransack and Crumplezone were contacted by Megatron and were told to keep on eye on things. They also decided to enter the race, either to win the cup and cause as much damage as they could to the other racers. Override, Dirt Boss, Ransack, Crumplezone, Optimus Prime, Hot Shot, Red Alert, Landmine, Clocker and Brakedown participated in the qualification round.
Surprisingly, this was also the first Hasbro exclusive transforming Movie Optimus Prime figure to be based on the final design seen in Age of Extinction. He even features the forearms that Prime had before obtaining the Sword of Judgement, which unfortunately means that he is inaccurate to his appearance in the battle of Hong Kong and the entirety of The Last Knight. The sword's blade is still painted as the heated-up version from the concept art.
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.
Exclusive to Walmart, this Deluxe Class Optimus Prime is an all-new mold, close in scale to Voyager Class Megatron. He has a high range of motion, with ball jointed shoulders and hips, swivels at the neck, knees, and feet, and double swivels in the elbows. As a result of the transformation process, he can also rotate at the waist, though this is hindered considerably by his "backpack" kibble. This can be remedied by pointing the truck nose downward, as it is in the packaging. Optimus Prime also features the spring loaded "Automorph" feature in his head, if the truck kibble pushes the small grey switch from his back before splitting the chest into half.
In late 2014, twelve Kreons were sold through TakaraTomy's "TakaraTomy A.R.T.S" Gacha capsule-toy machines in Japan. Thankfully for the rest of the world, these Kreons are all basically identical to previously-released ones in the Hasbro lines. The Gacha release of Optimus Prime is basically the base Custom Kreon Optimus using his clear-plastic helmet and carrying the small ray pistol, lacking his leg-wheels, smokestacks and backpack (and of course all those other parts and accessories).
In Transformers: Decepticons, Optimus Prime lands on Earth along with the other Autobots to stop the Decepticons. Optimus does not appear until Megatron is released and Starscream escapes with the Allspark. Optimus fights Megatron, but is defeated and is killed while Megatron gives chase to his traitorous second-in-command. In the 2009 Revenge of the Fallen video game by Activision, Optimus Prime is among the playable characters.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.
Screen Rant is exclusively announcing that the Transformers brand will join the pop culture series of toys with figures from Star Wars and Marvel and you can get your first look below. Hasbro relaunched their Mighty Muggs line in January 2018 with by announcing plans for over 50 figures from Star Wars and Marvel, with each collectible figure including the new push-and-turn head feature that changes their facial expressions. And yes, this new feature applies to your favorite Cybertronians too!
The all new 2006-2007 Classics line featured characters from the original series in updated forms. Hot Rod (now called Rodimus due to trademark reasons) was in the first wave of Autobots along with Optimus Prime and Bumblebee. Due to most of the Classics lacking visible Autobot and Decepticon insignias, this figure lacks the distinctive Autobot symbol seen on the chest of all other versions of Hot Rod/Rodimus, to which fan companies have responded to with alternative stickers. His vehicle mode is based on an obscure Japanese Supercar, the Dome Zero, manufactured by DOME Co. Ltd in 1978.