Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
A K-Mart exclusive set released on "Black Friday" (the day after Thanksgiving, the most hellishly busy shopping day of the year), this set consists of Super Base Optimus Prime, Jetfire, their respective partner Mini-Cons Sparkplug and Comettor, the Adventure Mini-Con Team, and oddly enough, Longarm. Optimus Prime's red plastics and paint were replaced with gold, the only changes made to anyone in the set. It is this set from which the name of Optimus Prime's combined mode with Jetfire, Jet Prime, comes.

Rodimus Prime is a fictional robot superhero character from the Transformers robot superhero franchise. He was formerly known as Hot Rod and was first seen in The Transformers: The Movie but was reformatted into Rodimus Prime when he received the Autobot Matrix of Leadership from his mentor, Optimus Prime, the leader of the Autobots, and assumed the role of the movie's protagonist. Hasbro has used the names Autobot Hot Rod, Rodimus, and Hot Shot as replacements for later characters, due to trademark issues with the name Hot Rod. His alternate mode varies between depictions, but usually possesses a red, yellow, and silver paint job.


Like the previous Prime, it is loaded with features, though it ditches the first movie's Automorphing for the new Mech Alive gimmick. When a grey tab on his midriff is pressed, Prime's entire pectoral region "flexes", lights in his chest and eyes glow, and he declares "I am Optimus Prime" in Peter Cullen's voice. For the European release of the figure, to get past the language barrier, the Cullen sound clip is abbreviated to just "Optimus Prime"; in some regions, including Quebec and the UK (but only after a month or two), both versions were made available. A transformation sound effect activates when his torso is transformed, and once Prime is in truck mode, an almost unnoticeable button (a small square located beside the screw for the battery compartment, undocumented in his instructions) is revealed, which activates engine-idling noises.
A limited edition of the Optimus Prime toy sold as a mail-away exclusive by PepsiCo was made available in North America in 1985. This version of the figure came with a small fold-out leaflet glued to the top-right of the packaging, which contained two Pepsi logo stickers for the buyer to attach to Prime, mid-way through the traditional silver-and-blue stripe on his trailer. Canada also got a version of this promotional figure, but with much larger stickers that were the full length and height of the trailer. This promotion would go on to serve as the inspiration for the Japanese character of Pepsi Convoy, who would in turn be released by Hasbro as a new "Pepsi Optimus Prime" in 2007.
Optimus foiled Megatron's attack on 21st century Tokyo after informing his old foe that wherever he would pop up, the Autobots would be there to thwart his evil intentions. Henkei! Henkei! volume 1 Optimus and Bumblebee later intervened when Astrotrain attacked Shinjuku Station, using their bodies to shield nearby humans from the destruction the triple-changer brought about. They were unaware that Astrotrain's rampage was really a distraction staged to keep their attention away from Megatron's gathering of energon cubes nearby. Henkei! Henkei! volume 2 Optimus continued to do battle against Astrotrain until Rodimus showed up to provide the Autobots with additional firepower. Henkei! Henkei! volume 3
The first in TakaraTomy's Hybrid Style series, Galaxy Convoy is a partly die-cast figure with scaled-down equivalents of the accessories that came with the Leader-class figure. This highly-intricate figure retains all the transformation abilities of the original figure—vehicle, flight mode, robot, and Super Mode—and even its Cyber Key-activated features (even coming with two keys so they can be deployed simultaneously), with additional touches like spring-loaded mechanisms that snap his cannons into place, and hand-grips on the weapons for Super Mode. While he does lack electronics or firing missiles, Prime still includes his Matrix, super-tiny yet still removable, and has four alternate sets of hands: two clenched fists, two with pointing index fingers, two with splayed palms, and two curved hands for holding his various weapon handles. Given the figure's small size, a reconfigurable head was infeasible, so it also comes with an alternate Super Mode head with a mouthplate and crests deployed, though the standard head must be attached in order for the figure to be transformed to vehicle mode.
Optimus Prime and his troops lay deactivated on the Fera Islands for three million years until G.I. Joe stumbled upon them one day in 1939. The Line The Autobots were reactivated by a repair drone and given new disguises, with Optimus Prime being reformatted into an unknown World War II-era human vehicle. He explained to Duke who they were, and learned that Megatron's Decepticons had been reactivated a year prior, and were currently wreaking havoc on Europe along with Cobra. While hesitant at first, Optimus Prime soon joined G.I. Joe in their mission to destroy Cobra and the Decepticons. Transformed After commanding the Aerialbots to get the Seekers out of the way, Prime advanced across the Fera Islands, but met resistance in the form of Rumble. Trial by Fire
When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, using 12 ball-jointed block pieces, giving him a range of motion similar to Masterpiece Prime, with the exception of the head, which can only move up and down, not side-to side. Speaking of the head, it is by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate inside a simplified helmet, mainly featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
He next appears in Transformers: Energon, the only time during the Unicorn Trilogy where Prime is not the main protagonist. In Energon, set ten years after Armada, he is no longer able to combine with his trailer. Instead, he has been gifted with the Spark of Combination by Primus, allowing him to combine with the quartet of vehicular drones in his trailer. Fire One, Copter Two, Digger Three, and Submarine Four, can each form either an arm or a leg when they combine with Prime, creating his super mode. Later, Prime gained the ability to combine with fellow Autobots Wing Saber and Omega Supreme, the latter case creating Optimus Supreme.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury
Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.
Screen Rant is exclusively announcing that the Transformers brand will join the pop culture series of toys with figures from Star Wars and Marvel and you can get your first look below. Hasbro relaunched their Mighty Muggs line in January 2018 with by announcing plans for over 50 figures from Star Wars and Marvel, with each collectible figure including the new push-and-turn head feature that changes their facial expressions. And yes, this new feature applies to your favorite Cybertronians too!
His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[11] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).
Hasbro has had a bit of a strange relationship with Bumblebee. In the early days (we’re talking mid-’80s) he was hugely popular, both on the TV show and as a toy, and Hasbro was sure to capitalize on that. As a result, there were more different Bumblebee toys during that time and into the early ‘90s than for any other Transformer. Of course, the alternate Goldbug version helped boost the number of toys they could make.
If instead of all heading into the lab together, the Autobots had sent in Bumblebee alone, and Bumblebee subsequently managed to escape with the antidote to the Decepticons’ poison, the Autobots escaped from the Valley of Poison and returned to Autobot headquarters. Once the other Autobots were cured, they all drank a toast to Bumblebee, to celebrate his part in the mission Decepticon Poison
Today, generally the creator sets only emphasize Lego as a building system. They come with pieces and instructions for two alternate models. Generally, Creator sets utilize a more basic color selection and look less “realistic” due to the emphasis on a versatile piece selection. Contrast that with current licensed themes and even Lego’s own proprietary themes. Themed/licensed sets are now trying to achieve more “realistic” models. As a result, piece and color selection skews toward more specialized pieces and colors again making the “critical mass” of pieces harder to achieve.
A redeco of the first Sports Label Convoy, this figure transforms into a white, navy, and grey sneaker. Promotional images for the figure depicted its robot mode as white and aqua-blue, but the finished product was visibly darker, produced in shades of off-white and dark teal. In either coloration, it sure as heck looks like it should be Ultra Magnus, but for whatever reason... it ain't.
This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.

Optimus Prime was the central figure of Kabaya's final Cybertron candy toy series, Change Galaxy, which was themed around his combinations with Leobreaker and Wing Saber. In addition to being transformable (again, through partial disassembly), this figure of Prime combines with the Change Galaxy versions of his partners, forming Savage Claw Mode and Sonic Wing Mode. Prime himself came packaged with an alternate Super Mode head and his leg armour in order to complete his appearance in each of these forms. Additional Super Mode pieces were not created for this line, as that wasn't the point.

Megan Fulton, Tim Johnides, Jeff Williams, Dante Lauretta, Magnus Dahlsröm, Jayson Peters, David Michael, Gerry Tolbert, Andrew Smith, Ray Wehrs, Joel Becker, Scott Gaeta, Beth Kee, Joey Mills, talkie_tim, Danny Marquardt, Adam Bruski, John Bain, Bill Moore, Adam Frank, Lacey Hays, Peter Morson, James Needham, Matt Fleming, Adam Anderson, Jim Reynolds, Seiler Hagan, Bryan Wade, Petrov Neutrino, Jay Shapiro

When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1
A five-inch tall, non-transforming highly-articulated PVC figure of Optimus Prime in his Super Mode was the eighth entry in Takara's Mega Super Collection Figure series. In addition to a non-transforming figurine of Sparkplug, Optimus comes with two sets of alternate hands—one set with spread palms, one curled into fists—and is armed with his Convoy Gun, which can either peg into his right fist (and only his right fist) or onto his back.
As with all Action Master toys, Optimus Prime himself could not transform. His sculpt is based heavily upon the The Transformers cartoon model, though the colour scheme may be based upon his Powermaster (pre-supermode cab robot only) body, with blue forearms as opposed to just blue fists, although unlike the Powermaster cab robot it has blue thighs as well. His truck cab vehicle and the trailer do transform, though neither have robot modes. The truck cab can transform into a small plane, while the trailer transforms into a battle station with turrets that several Action Masters can man.

Optimus was checking up on the Autobots' ongoing energy collecting campaign when Wheeljack informed him that a disturbance in Sector 33HM of space-time would eventually cause major problems in its time-stream. Optimus assigned the investigation of this disturbance to Bumblebee, then noted that Hot Rodimus had not completed his latest report, communications with the young Autobo having been lost while he was on his own mission. With a brief inspirational speech, he urged his subordinates to redouble their efforts in maintaining harmony throughout reality. Little did Optimus suspect that in his own universe, Megatron was planning a coup against the Autobots... Uprising
Early versions of this storyline featured Rodimus returning as "Rodimus Primal," a techno-organic Maximal with a form similar to Optimal Optimus'. This concept was discarded in favor of Rodimus working alongside Primal Prime, but was later adapted for a storyline feature in "Ask Vector Prime." In an alternate reality where Starscream had possessed Waspinator and brought a premature end to the Beast Wars, Rodimus Primal led the Wreckers as one of several resistance group's to Megatron's rule over Cybertron. Eventually, Megatron was overthrown by his rebellious generals Obsidian and Tankor, splintering the Vehicon force prior to the pair being abducted by Unicron. Without Obsidian's leadership, the Vehicons crumbled, and Rodimus Primal became part of a new Cybertronian ruling council that also included "Waspscream," Magmatron, and Mutant leader Icebird.
Some time later, as the war raged between Autobots and Decepticons on Earth, Optimus had requested the Aerialbots as reinforcements from Cybertron. Though they nearly defected to the Decepticons, Optimus was able to secure the Aerialbots as allies. Later, when a power plant had to be evacuated of its human workers due to the fear of landslides, Optimus posted Denfensor at the location to secure its protection. Optimus then drove off to check up on the rest of his troops who were aiding in the area’s evacuation. Though he passed a military convoy heading towards a plant, he thought nothing of it, unaware that they were the newly created Combaticons in disguise. Optimus then reached the Ark, and from there opened communications with the Aerialbots. Optimus had someone come into the know that the Decepticons were moving in towards the plant. He watched from afar as Defensor and Superion fought Menasor and Bruticus, wary to send more Autobots into the fray while these titans wreaked havoc onto the battlefield. Optimus allowed himself a smile when the Aerialbots and the Protectobots proved themselves superior teams to the Decepticons’, though at the back of his mind, he was wary. After all, Megatron himself had chosen not to add his considerably weight to the battle... The Special Teams
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.[4]
First Edition Optimus Prime is, as his title suggests, the first toy available to the public from the Age of Extinction toy line. Prime is an all-new Leader Class-sized figure, featuring his new Western Star "5700 OP" concept truck vehicle mode and his updated robot mode from the film (well, mostly based on his initial design rather than the final design in the movie). His transformation is much simpler than his counterparts from the previous three movie lines, being billed as transforming in "15 easy steps." His torso, shoulders, upper legs, and the vehicle mode grill are all completely chrome with the exception of minor blue and red details painted on his chest. However, this comes at the expense of his smokestacks and wheels being bare gray plastic, whereas they are chromed in the film. His simplified transformation also comes at the expense of having a very bulky "backpack" of kibble composed of the rear of the truck cab and the fuel tanks, limiting his shoulder and hip articulation. However, his Truck kibble can be detached from the main figure to form the majority of his vehicle mode on its own.
Inspired by a 1985 special limited release of Optimus Prime with bonus Pepsi decals for his trailer in the US market, Pepsi Optimus Prime sports an egregious number of new new Pepsi-themed paint masks and decals, as well as an entirely new trailer unit, specially designed to carry a single 500ml-size bottle (a common size in Japan), three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan).
This increase in average piece count could be a factor in why LEGO is perceived to be more expensive now than in the past. LEGO sets have become larger and more complex. They have started to market directly to an older crowd with sets such as the Modular Buildings and the Architecture series. These new sets have rekindled interest in LEGO for an older generation but at the same time, it has introduced this same generation to the relatively high price of LEGO sets.

When Sergeant Hound apprehended a criminal going by the name "C-81", rumors that the prisoner was in reality a "Megatron" that had gotten past the TransTechs' security procedures piqued General Optimus Prime's interest. Though Cheetor assured him that it was impossible for a "Megatron" to have been allowed in Axiom Nexus, the General's concerns did not fade. More pressing concerns took over, however, when the entirety of Axiom Nexus, and nearly all of the TransTechs suffered a sudden shutdown due to a surge in the Global Net. General Optimus Prime tasked Bruticus with keeping guard over the prison while he and Hound went to investigate the source of the surge, the planet's core.


This Optimus Prime is a new Voyager-sized Triple Changer mold, which transforms from robot to tanker truck to plane and back. His robot mode is heavily based on Generation 2 Laser Optimus Prime, whilst the deco appears to draw from Star Convoy. His Titan Master partner Diac transforms into his head (but any Titan Master figure is compatible). Like all Titans Return Voyager class figures, he has built in mechanisms to "bulk up" his noggin. In his case these are spring-loaded pylons. His robot mode also features fake truck windows.

During the war, Optimus was killed in battle by Megatron, but was eventually resurrected. The Fight Begins Coming to the dire realization that the war against the Decepticons had become a never-ending arms race, Optimus Prime challenged Megatron to single-combat, with their troops acting as witnesses to their terrible and final clash. The battle between both faction leaders ended with Megatron beaten down and goading Optimus into delivering the kill shot...

The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
If you're still on the fence about Masterpiece MPM-5 Decepticon Barricade, or are considering purchasing Masterpiece MPM-6 Ironhide (which is also currently available), now might be a great chance to grab this Amazon.com exclusive figure from Hasbro. As of this writing, MPM-5 Barricade is currently on sale at Amazon.com for $52.13, which is 35% off the regular retail price of $79.99. Part of the special deal is that he's also available for "FREE" One-Day shipping for Amazon Prime members. Order - Read More
Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.

Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate head sculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime Leader-class-based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
Thanks to the efforts of fellow Seibertron user, Sabrblade, we now have pictures of the box that Entertainment Earth's Transformers Select Series exclusive Red Swoop will be shipped in when he's available this March! As you can tell from the images it's just an ordinary brown box... But a brown box with symbols relating to the Power of the Primes line! You can see all the Prime symbols present and Cybertronian writing, which according to Sabrblade, when translated says: - Read More
At about 2/3 the size of the Smallest Transforming Transformers, this diminutive version of the original Generation 1 Optimus Prime toy is the smallest figure of the Autobot leader made to date. It was sold as part of Takara's blindpacked Mini Toy Shop Collection line, a series of miniaturized figures from numerous classic Takara toylines, including Transformers, Microman, Licca-chan, Choro-Q and others. Both of Prime's modes are represented by non-transforming individual figures, which come together in a two-pack. In-box, his truck form is even packed in a miniature recreation of his original Japanese packaging, which also includes a shrunken version of his sticker sheet. A tiny version of the original Takara Transformers catalog completes the set.
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More

Only available at ToysЯUs, this Optimus Prime is a redeco of the Classics figure. He features a cartoon/toy accurate deco on his truck/robot parts, and vacuum-metallized upper legs & front grille to evoke his original Generation 1 toy. Like every Classics Optimus Prime mold, he still features all of his accessories. This Optimus was packaged along with the redecoed Age of Extinction Optimus Prime.
Commemorating the death of Optimus Prime in The Transformers: The Movie, this set contains a special version of the original Optimus Prime figure with show-inspired translucent blue windows. It was packaged with Ligier and Alert, in an apparent homage to the similar Diaclone "Powered Convoy DX" giftset that packaged the "Powered Convoy" version of the Optimus mold with figures using the molds of Ligier and Alert.
×