If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.
The TakaraTomy version, part of the first wave of Movie Advanced Series toys, is dubbed "Classic Optimus Prime", and opts for a deco closer to Prime's previous on-screen appearances, omitting the blue paint on his feet and hands to reveal the gray plastic underneath, and adding new paint details all over. Instead of painting it in clear light blue, his light-piping eyes is neutered with opaque light blue paint. In terms of quality control, at least one sample has missing it's silver paint on the head's left cheek.
Near the end of the series, in what is generally regarded by fans to be his most impressive feat, Optimus Prime takes on Galvatron without combining with any other transformer. Traditionally, throughout the three series and RiD, Optimus Prime has been shown to be physically weaker than Galvatron. At the end of the intense fight, Galvatron proved stronger than Prime, but Prime managed to destroy Galvatron with Vector Prime's sword.
An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]
The figure seems to have some transformation scheme & design related problems in it: The front truck cab's upper two pieces are supposed to be pushed to the front in robot mode, but the piece keeps collapsing back due to looseness when the figure is standing straight (Though pressing the two halves together firmly tends to reduce this issue for a while), while the tab underneath the truck grill does not connect well with the bottom port. Additionally, his 5mm compatible hands have a slight problem with wielding weapons with short 5mm posts.
When the Decepticons tried to take control of a solar energy station, Prime sent Roller in to investigate. Megatron's Fight for Power Later, Prime sent Bumblebee to spy on the Decepticons' latest misdeeds, and the Autobots discovered that they were having trouble with the ion drive of their starship. Prime led the Autobots in an attack on the mine the Decepticons were using to test their propulsion system and routed Megatron's force. Autobots Fight Back
Cloud Optimus Prime is a redeco of the Classics Voyager Class Optimus Prime mold, transforming into a modern cab-over style truck of made up model, dominated by a large "energy unit" on his roof (actually a wind vane). He features a similar Generation 1-inspired deco to the original toy, but aims for a "cleaner" appearance by omitting many paint details such as stripes on the cab, while the energy unit is colored black with a silver Autobot insignia in homage to Generation 2 Optimus Prime. In robot mode, Prime's energy unit transforms into a large blaster and his smokestacks transform into a smaller laser cannon. Additionally, both weapons can combine together to form a double-barrelled over-shoulder weapon. He was available exclusively at TakaraTomy Mall.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.
Of course, while Bumblebee does a lot of serious action in the films, tumbling and punching and kicking, you don’t see McFly doing a whole lot of that in the Back to the Future films. In fact, McFly doesn’t get up to too much more hard-core physical action, aside from some skateboarding and wailing on the guitar. Nevertheless, Fox does have a distinctly bowlegged gait, and you can see some of that in Bumblebee, and you can maybe see some Fox mannerisms in his more casual interactions with Sam Witwicky.
There is definitely a market for LEGO for adults. The modular buildings and other exclusives scratch that itch but there could be so much more. Currently the adult LEGO offerings falls into two categories: sets that look good but are boring to build (architecture) and sets that are fun to build (modular buildings, some Technic). The architecture line is marketed towards adult former fans of LEGO who want something to put on their desk. They can serve as a reintroduction to LEGO for adults.

This Optimus Prime is an extensive screen-accurate redeco of the Dark of the Moon Supreme Class/Leader Class Striker retool, using the Ion Blaster accessory from the Buster Optimus Prime and the Toys R Us Japan-exclusive battle blade accessories. He also comes with the Knuckle piece and the Battle Hooks and uses the 2-2-1 articulated fingers featured from the second Asia Premium Series release. He also features a Japanese language sound box for his voice gimmick, replacing Peter Cullen's "I am Optimus Prime" voice line.
Produced by the Chupa Chups lollipop company, this small version of Prime is essentially a battery-powered "holder" for lollipops, which fit behind his head and are spun around by a motor that activates when his pelvis is pressed. Prime has articulation in his shoulders, and his fists feature small holes that allow him to hold and store two more lollipops, in addition to the strawberry sucker he comes with. Weirdly, his Matrix compartment is open instead of having the grill front-and-center.

In this incarnation, Optimus Prime is the main protagonist and shows a near-xenophobic reluctance with interacting with other cultures, believing that such interaction would cause more harm than good. Consequently, he prohibits his team from mingling with the locals of Earth, Velocitron, and the Jungle Planet during their search for the Cyber Planet Keys. This attitude was drastically changed when Prime realized that the only way to acquire the Cyber Planet Keys from Velocitron and Animatros was to play by their laws.
Optimus Prime is also among the characters who appear in the flash game TRANSFORMERS CVBERVERSE Battle Builder Game.[21] Optimus Prime is one of the Autobots featured in Transformers: The Ride at Universal Studios theme parks. In the ride, Optimus fends off against the invading Decepticons at N.E.S.T. headquarters while telling Evac to escape with the AllSpark shard. He battles Megatron throughout the ride until Megatron is killed by Evac. Optimus then congratulates Evac and the riders for protecting the AllSpark.

The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.
A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.
Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game.[28] As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
A figure of Prime combined with Jetfire was released as part of the second Big Transformers wave, which came with no accessories of its own, but could hold any of the weapons released with the other second wave figures, including Jetfire's gun, the Star Saber, the Skyboom, and the Requiem Blaster. As with the first wave figures, he came packaged with Ramune candy.
In April 2007, photos of a repainted Alternators Mirage, in a color scheme similar to Kiss Players Hot Rodimus, and in Alterators-style "fishbowl" packaging began to appear on the internet. Simply called Rodimus, the 27th Alternator lacks almost all of the Kiss Players accessories, including the fishing pole, but keeps the new head sculpt. This figure also sports the classic "flame" detailing in lieu of the Kiss Player's white stripes, while the vanity plate reads "TOO HOT". Rodimus was first sold as a convention exclusive at the 2007 San Diego Comic-Con. The Monday after the convention, it was made available on the Hasbro Toy Shop website, where it would sell out that same morning. The instructions present an alternate name for the figure: Rodimus Prime; whether this is merely an oversight is unknown.

These include two large guns, patterned after the new weapons included with the G2 version of the classic Optimus Prime toy, which can be attached to the trailer in a similar fashion to those of Powermaster Prime. Also included are two additional (blue) Prime heads, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger's interpretation of Prime, especially as seen on the cover of the first issue, one pristine and the other battle-damaged.


The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.
In the animated series, Optimus Prime was originally in the Autobot Academy and friends with Sentinel Prime and Elita One. When Elita is lost on a planet dominated by giant spider-like aliens, he blames himself for leaving her behind, where she supposedly dies in the explosion of a wrecked Decepticon warship loaded with Energon. Sentinel doesn't forgive him for losing her and Optimus takes full responsibly for Elita's demise. This caused Optimus Prime to wash out of the Autobot Academy. However, Ultra Magnus pulls some strings so that Optimus Prime could be captain of a strange Space Bridge repair crew composed of a war vet named Ratchet, a fledgling cadet named Bumblebee, and his fellow cadet Bulkhead. Optimus is given command of the starship which is the vehicle mode of Omega Supreme.
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.
The second known version [4] ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
Prime suffered a severe, though unfair, defeat when Megatron challenged him to one-on-one combat while imbued with the different abilities of all the Decepticons. Teletraan I, the Ark's computer, discovered the deception in time, and the Autobots were able to drive off the Decepticons. In "Prime Problem", Megatron created a clone of Optimus, which caused confusion with the other Autobots. Windcharger and Spike, however, were able to identify the clone before it led the Autobots into their demise.
Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.

Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.
Part of the first wave of 2012 Generations Deluxe Class toys, Optimus Prime is based on his Fall of Cybertron design, and transforms from a robot to a Cybertronian truck and back. His ion cannon, based on a weapon seen in his concept art, can mount via either of its two 5mm posts onto ports on his hands, forearms, back, and shoulder smokestacks. The toy is known for being oddly small for an Optimus Prime toy, especially when compared to other toys from the same line. This allows him to be more or less in scale with Grimlock and Bruticus (likewise from the same line), however. Optimus features sculpted fake wheels on his back.
Certainly the most iconic, and most common, leader of the Autobots is Optimus Prime. But the thing about Optimus Prime is that he dies... a lot. And every time he dies, someone has to take his place-- until he’s invariably resurrected in one way or another, that is. In many storylines, including the original animated Transformers: The Movie, it’s Hot Rod who takes over as Rodimus Prime.
A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile.[76] With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.
Released in the latter stages of the Cybertron toyline, this redeco of the Leader-class Optimus Prime figure introduced a new colour scheme that several other tail-end releases would emulate. Taking its name from the Japanese version of Cybertron and with a bio noting that this new body depicts Prime after he embarks on his galaxy-spanning mission at the end of the Cybertron cartoon, "Galaxy Force" Optimus Prime replaces the original toy's blue parts with black and the translucent blue with smokey clear, and moulds several—but not all—grey parts out of red plastic, including the toy's rifles, rail gun covers, missile launchers, and Super Mode leg guns. In the realm of new paint operations, Prime now sports all four Cyber Planet Key symbols on his shoulders, and his unique Matrix-shaped Cyber Key (now with the code lo9x) finally has a gold-painted border, as it had always had in Japan. Additionally, Prime's hip joints were tightened up with this release, making it easier to stand him up in Super Mode.
This Collector's Edition Japanese e-HOBBY exclusive was a redeco of Targetmaster Kup, released in conjunction with the 2006 reissue of Kup and designed to represent the character Orion Pax from the Generation 1 television series episode "War Dawn". Orion transforms into a Cybertronic pickup truck and came with both a gun and Barrelroller, a redeco of Recoil. He has full shoulder rotation, though the way his elbows are set up means he cannot make full use of their joints. His legs feature no articulation whatsoever.
This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.

In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.[4]

This creation and expansion of the secondary market in conjunction with LEGO now marketing some of their products to an older audience has made the prices of some old sets increase exponentially.  On the extreme range, there is the UCS Millennium Falcon that is selling new for upwards of $2,000 (and close to $1,500 USED!). It sold for $500 new in 2007. Even non-licensed sets can run a premium, such as the Cafe Corner that was one of the original modular buildings. It was $150 new and now it can sell for over $1,000.
The bio for the Botcon 2015 version of Megatron reveals that he comes from an alternate reality where Megatron achieved victory during events similar to Dark of the Moon and killed both Optimus and Sentinel Prime. However, Rodimus Prime then arose to challenge him, facing him in a battle that Megatron ultimately chose to flee, resulting in him ending up in the Axiom Nexus.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
Part of the first assortment of "Custom Kreons", this version of Optimus Prime comes with a buildable parts rack on which to hang/store his many many extra pieces. His tampographs are much more heavily-detailed than the original Kreons, based on the original Optimus Prime toy. His "normal" helmet (and small sword) are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens), plus a buildable large rifle, a buildable wing-pack, and a ray pistol (originally an Andorian blaster from Kre-O Star Trek).
4. Collectability/Internet/Ebay: While Lego has always been a somewhat collectible product, the age of the internet has increased the collectability of Lego. Nostalgic adults came together on the internet to trackdown and re-acquire sets from their child hood. I think Lego has embraced this as evidenced by large limited edition sets aimed at the adult market. This is also evident in the increase in tempo of development of sets and themes that drive the collector to want to buy more and more; which overall is good for Lego. In the past, an individual set and theme seemed to have more life than they do now.
Scarlett later used the Brainwave Scanner to contact Optimus's spirit and guide him back to the mortal realm. In the physical world, Ultra Magnus challenged Megatron to a duel on a Dyson sphere surrounding the sun. The Autobot god had not ferried Optimus to the afterlife - he had merely repaired Optimus's body by taking it into himself. During the climatic duel, he allowed Optimus to burst free from within his armor. The reborn Optimus punched Megatron into the sun, then turned his attention to reclaiming the stolen Matrix from the Decepticons. After Atlas defeated the maddened Primus, Optimus healed Snake-Eyes' injuries. Optimus then turned his attention to returning Primus/Cybertron to its regular orbit. As the planet left the solar system, he departed aboard the Ark 2 alongside a crew of Joes and Autobots, in the hopes of contacting the Makers. The War Never Ends
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
Cloud Optimus Prime is a redeco of the Classics Voyager Class Optimus Prime mold, transforming into a modern cab-over style truck of made up model, dominated by a large "energy unit" on his roof (actually a wind vane). He features a similar Generation 1-inspired deco to the original toy, but aims for a "cleaner" appearance by omitting many paint details such as stripes on the cab, while the energy unit is colored black with a silver Autobot insignia in homage to Generation 2 Optimus Prime. In robot mode, Prime's energy unit transforms into a large blaster and his smokestacks transform into a smaller laser cannon. Additionally, both weapons can combine together to form a double-barrelled over-shoulder weapon. He was available exclusively at TakaraTomy Mall.

Each arm features flip-out blades that trigger when a button on the forearm is pressed. Each of these blades has a Cyberglyphic symbol on it. The blades severely restrict Prime's arm articulation when retracted, as they get in the way of the kibble, but as there is very little one can do with Prime's arms without causing the blades to deploy, this is hardly noticeable.

The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.
Categories: Unreleased toysUpcoming toy releasesArticles in need of imagesAction MastersAlternators AutobotsAlternity AutobotsAuthenticsBot Shots AutobotsClassics AutobotsCloud AutobotsCombiner WarsCombinersConstruct-Bots AutobotsContest prizesConvention exclusivesE-HobbyGeneration 1 AutobotsGeneration 2 AutobotsGenerationsGeneration 2 Go-BotsGT charactersHenkei! Henkei! AutobotsKiss Players AutobotsMachine Wars AutobotsMail order exclusivesMasterpieceMusic LabelPlatinum EditionPower of the PrimesPowermastersQ-Transformers charactersReturn of Convoy AutobotsRobotmasters AutobotsSDCC exclusivesTimelines charactersTitanium SeriesTitans ReturnToys "R" Us exclusivesTransformers with three modesUnite Warriors AutobotsUnited AutobotsUniverse (2008)War for Cybertron: Siege

Then he dreamed of awakening, only to find his troops smashed. Realizing his only hope for survival lay with Cybertron, Optimus then boarded the ship the Autobots were repairing, and travelled back to his home planet. Arriving on Cybertron, he found it completely under Decepticon domination. Optimus then met an old Autobot codger who pleaded that he return to Earth to gather a force that could overthrow the Decepticon’s regime. Optimus remorsefully told the old Autobot that there could be no reinforcements from the planet Earth. The two Autobots were then swarmed by Decepticon police officers, who Optimus fought until his dying breath…
Legion Class Optimus Prime is a redeco/retool of the first Revenge of the Fallen Legends Class figure, with the deco resembling the paint job from Optimus Prime's Western Star "5700 OP" concept truck. While the main body is identical to the figure, the arms and legs are newly tooled, with simple assemblies for the wheels. The retooled legs now features a more solid stopping point, which prevents the center front grill/legs to swing back further. It should be noted that his flame decals are painted over the side windows.

Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.
The largest 2007 Transformers movie Optimus Prime toy, Leader Class Optimus Prime featured, at the time, the most accurate representation of the CGI designs' complex transformation sequence. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel hitch is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.

This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
Hasbro's Toys R Us-exclusive 2003 reissue of Powermaster Optimus Prime was actually a modified version of Takara's then-recently reissued God Ginrai set. As such, the cab was partly constructed out of die-cast metal, vacuum-metalized plastic and had clear blue windows. The trailer was retooled so the super robot's fists could slide in and out of the arms. This set also included the originally Japanese-exclusive Apex Bomber drone trailer that attached onto the back of Optimus Prime's trailer in vehicle mode, and could become extra armour in super robot mode.The missiles where unchromed and lengthened due to safety issues as opposed to the Japanese release which were chromed and shorter.

The trailer unfolds to form a battle station bristling with many firing weapons. Primarily, it can fire an air-powered missile launcher, a ripple rocket launcher with 5 missiles that can be launched individually (this turret can also be mounted in Laser Prime's hand) and a 'disc launcher', that fired several blue plastic discs adorned with the Generation 2 Autobot sigil. This disc launcher is the only weapon that can be used in vehicle mode.
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
Rodimus was seen in the season 3 "Transwarped" special, leading his team in defending a Space Bridge from Strika's "Team Chaar". His team was overwhelmed, and Rodimus is infected with Cosmic Rust, courtesy of Oil Slick, putting him out of commission. According to Derrick J. Wyatt, Rodimus is back on Cybertron de-rusting. He can later be seen on Cybertron cheering for Optimus Prime and his crew for defeating the Decepticons in "Endgame, Part II".

The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.

This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
Brian Colin, Peter Smyth, Mark Buffington, Josh H., Propelstalz, Mary Crocker, Wayne Moulton Jr, Mitch Gross, Jim Valko, Andrew Brown, Lucy Ravitch, Nicholas Duresky, Heather Hofshi, John Kemp, Thorsten Karge, Natasha Dzurny, Keith Ives, Benjamin Chan, Neal Bhatnagar, Justin Farr, Regan Lee, Elaine, Nate Fugal, Stephanie Tennison, Jon Rasmussen, Ryan Pulis, Owen Duffy, Colman Reilly, Anthony, Mark Richman, Alexis Ohanian, Steve, Greg “TVsEgon” Skinner, Andy Saavedra, Daniel, Willie Raymond Taylor III, Chad Ingham, Irene Christian, Clinton Richmond, Jamey Stegmaier, James Allenspach, John Howell, Leif Terry, Tiago Pereira, Nathan Heath, Grinidon, Roman, Berserker Hew, Clark Stacey, Ben Harkins, Kayvaan Ghassemieh, Travis B., Justin Myers, Magna Nordgard, Jim Griffin, Jeff, David Smith, Matthew Titelbaum, Dennis Hitzeman, Daniel Lieske, Michael Jantze, Ruddy, Tom Damico, Kelson, Michelangelo Grigni
In Titan Magazines' UK Transformers magazine, a comic strip on Optimus Prime, written by Simon Furman, would reveal where he was during the events of Movie Prequel #1. As he carries out his fateful plan to send the Allspark into space, the Autobot base is attacked by one of Megatron's drones with specific orders to kill him. As it locates the Allspark, Prime does the only thing he could think of to prevent it from transmitting its location to Megatron. He transforms into protoform mode and physically rams through it. Recovering in time to see the Allspark blast off, Prime is granted a vision of their war on Earth.

Also, as a new feature, most figures include advanced "automorph technology", which is designed to create quicker and easier conversion, which means moving one part of the vehicle or robot causes other parts to move, creating a final shift to battle mode; this was successful because the transformation was more complex in the movie line than in any other Transformers toy line.
Categories: Character stubs missing fictionStubCharacter stubs missing video gamesAction MastersAlternity AutobotsArmada AutobotsAutobot leadersBeast Machines AutobotsBeast Wars AutobotsBeast Wars: Uprising AutobotsCloud AutobotsCombinersConvoysDimension hoppersDreamwave Generation 1 AutobotsEmperors of DestructionGeneration 1 AutobotsGeneration 2 AutobotsGeneration 2 Go-BotsGhostsGladiatorsGT charactersHall of Fame charactersHenkei! Henkei! AutobotsMatrix bearersMulti-component TransformersPowermastersPrimesRevenge of the Fallen AutobotsRulers of CybertronTransformers with three modesTransTech AutobotsUnited AutobotsZombies
Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.
×