General Hawk stated in an interview that his typical transportation in Axiom Nexus was his Convoy colleagues. As the seats of General Optimus Prime's vehicle mode were manufactured at the same location as the VAMPs of his universe, Hawk was able to find a degree of familiarity in the strange world of Axiom Nexus. Andromeda - Axiom Nexus News, 2016/05/01
Released as part of a new line called Transformers: Tribute, Orion Pax is a redeco of Titans Return Sergeant Kup, and transforms from a red-and-blue Cybertronic pickup truck which is also an homage to Generation 1 Crosshairs's vehicle mode G1 Optimus's e-HOBBY toy. His Titan Master, retooled from Flintlock, features a new face that is based on the Thrilling 30 Orion Pax toy. As a redeco of the Kup mold, Orion Pax still suffers the leg panel misassembly.

The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)


Over the course of the next twenty years, the Decepticons succeeded in seizing control of all of Cybertron, forcing the Autobots to operate from their new city on Earth and two bases on Cybertron's moons. In the Earth year 2005 A.D., Prime, stationed on Moonbase One, dispatched troops to Earth to acquire energy for an upcoming strike on Cybertron. The Decepticons, however, got wind of the plan and used the shuttle run to attack Autobot City. A distress call summoned Prime and support troops to Earth. In the fearsome ensuing fight with Megatron, Optimus Prime sustained fatal injuries, but not before turning the tide of battle and forcing the Decepticons to flee. Despite the efforts of Perceptor, Optimus Prime went offline. The Matrix and role of leader of the Autobots fell into the hands of Ultra Magnus, Galvatron, and, subsequently, to Rodimus Prime. His last words were "Until that day... 'till all are one."
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Garry Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.
Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
The toy itself is a mix of different versions. The cab has the safety modifications, including the shortened smokestacks and longer missiles (and thicker rifle), but also has the modified hitch of the 2011 Chronicle DOTM two pack. Meanwhile, the trailer is the lighter grey version from the 2008 Universe release. This version also seems to suffer from mold deterioration.
Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love.
Entertainment Pack Optimus Prime is a slight redeco of the SDCC figure, with some deco differences between the SDCC release; this version has gray windows instead of blue and is missing some of the silver deco on the helmet and roof/feet, as well as the yellow paint on his lights. His midriff is also darker. Optimus also comes with a similarly-scaled Megatron and PVC figurines of Jack Darby, Miko Nakadai, and Raf Esquivel.
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!

Transported to a parallel Universe, as the walls of reality began to crumble, foretelling the coming of Unicron to the Armada universe, Optimus Prime and Jetfire were reformatted by their Mini-Con companions using the Mini-Con Matrix into new "Powerlinx" forms. Optimus Prime and Jetfire combined to hold the chaos-bringer at bay. Unicron was eventually defeated by the united power of the Mini-Cons.


Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.
The protoform mode consists of eight pieces of metallic blue plastic that plug into the arms, chest, pelvis and legs of the figure. With these pieces attached, the figure can be manipulated in a manner that might charitably be called "transformation" into his meteor-like "entry mode," accomplished by doing little more than tucking the head out of sight and folding the chest back. This blue-and-grey lump can be mounted on a three-piece stand that comes with the figure, allowing you to display it in mid-plummet. Optimus Prime's Earth mode, meanwhile, is made up of many armor pieces (including a particularly large backpack) that form a rather kibbly robot mode, which can then transform into a truck approximating a Peterbilt 379. We would go into what an abominable, unintuitive, parts-massaging mess this transformation is, but we wouldn't want to fill up the rest of the page.
Optimus confronted his archenemy on the battlefield, though he had to knock Starscream aside to get to him first. Due to a nearby explosion that rocked the battlefield, Optimus nearly lost both his stance and his head when Megatron took advantage of the opening. But Optimus's quick reflexes allowed him to shift to vehicle mode and back, dodging Megatron's attack and striking back in the process. As the battle raged on, both combatants found themselves evenly matched. Then Ratchet contacted Optimus with dire news; the Decepticons had managed to abduct SARA! Fate
A redeco of the first Sports Label Convoy, this figure transforms into a white, navy, and grey sneaker. Promotional images for the figure depicted its robot mode as white and aqua-blue, but the finished product was visibly darker, produced in shades of off-white and dark teal. In either coloration, it sure as heck looks like it should be Ultra Magnus, but for whatever reason... it ain't.

Another release of the Reveal the Shield Legends Class sculpt. The deco for its initial release is unchanged from the Transformers release from 2012, whereas the tooling is identical to the 2012 release's running change variant, with the retooled hands and a hole on the back of his head/top compatible with Cyberverse 3mm pegs. Bizarrely, the package art is lifted directly from the Generations Legends Class Optimus Prime/Autobot Roller two-pack's packaging, whereas the stock photos depicted on the back of the packaging are taken from Reveal the Shield Optimus Prime's packaging and only slightly altered, advertising a "Reveal the Shield" rubsign gimmick the toy doesn't actually have. Meanwhile, Hasbro's official stock photos provided to online retailers (including an in-packaging photo) depict the toy with the sword that came with the running change variant of the sculpt's 2012 release, even though the actual toy doesn't include the sword.
Optimus Prime appears in the prequel novel Transformers: Ghosts of Yesterday, where he and a group of Autobots travel in the Ark searching for the Allspark, battling Starscream's Decepticons along the way. While going through a worm hole, the Autobots find themselves encountering a group of humans in a spacecraft reverse-engineered from studying Megatron. With this discovery, Prime realizes the significance of Earth, as both Megatron and the Allspark are there. After saving Bumblebee from a pit of rock-chewing cave worms, Prime battles Starscream. He is about to be gunned down by Starscream and Bonecrusher when he is saved by the human craft. In retaliation, Starscream obliterates it.
In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.

As the Universe War began, Optimus Primal was shown a myriad of Transformers from across all timelines that he could choose to recruit into his Children of Primus in the battle against the Minions of Unicron. One such possibility was a Transformer who was either Thunder Clash or Optimus Prime, but, regardless, Primal chose Depth Charge and Rhinox instead. Homecoming
TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.
Although he was weak and low on energon, Prime made a last-ditch effort to save the day when he rammed through the wall of Megatron's energon-producing lab. G.I. Joe vs. the Transformers #5 After a quick recharge, Optimus single-handedly smashed the Decepticons, pounded Megatron to the ground, and ripped his fusion cannon off his arm. Prime then teamed up with the Joes and used Megatron's cannon to shoot down the SPS Satellite that had gone rogue and was destroying the island.
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
A Deluxe-sized figure sold only in Japan and Asian markets by Takara Tomy. The package consists of a highly poseable skeletal frame called a Core Body, along with parts to assemble the Core Body to either a Protoform mode or robot mode. In Protoform, the figure can transform into an atmospheric Entry Mode. The figure with robot parts is able to fully transform into vehicle mode.[87]

Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball-joints.
Part of the sixth wave of the 2010 Transformers toyline, this Optimus Prime is an all-new Deluxe class mold based on the original Generation 2 Laser Optimus Prime toy (see above). Transforming into a racing truck, he has some influences from the live-action movie Optimus Prime, including the more defined flames on his hood, athletic robot mode proportions and a more aggressive-looking translucent orange sword that can be held with both hands for maximum extreme chopitude. Optimus Prime features extensive use of translucent plastic in his arms, head and upper torso for a light-piping effect. Optimus also has a (non-detachable) matrix gimmick in robot mode that is formed by a relief pattern on the inside of the cab's side windows and is visible through the windshield/chest in robot mode. Like the Legends toy, he's part of "Reveal the Shield" and features a rubsign, this time on the roof. He is also very articulated and poseable, even featuring ankles and wrists that are both ball-jointed and hinged.
In 1984, a volcanic eruption re-activated the Ark, which, in turn, brought the Transformers back on-line. Prime led the Autobots in their opening battles to prevent the Decepticons from plundering Earth's resources, but, following their initial victory, the Transformers were all deactivated by Shockwave. Shockwave killed Prime and leeched the energy of the Creation Matrix from his mind. He used this energy to give life to his creations, the Constructicons. Shockwave was unaware that the Matrix was not just a program in Prime's mind, but a physical object in his chest. Before Shockwave could give life to Jetfire, his next Decepticon, Prime transferred the Matrix energy into the mind of Buster Witwicky. Buster used the energy to turn Jetfire on Shockwave, allowing Prime to reclaim his body and retake leadership of the Autobots. As a reward, he gave Jetfire true life.
Prime's trailer unfolds via a spring-loaded transformation mechanism in a battle station that is positively bristling with varied weaponry. In addition to the disc launcher, it is armed with a "ripple-fire" missile launcher that fires five missiles, an air-powered rocket launcher like the one previously seen on Hero Optimus Prime, and a small laser cannon that mounts on the base's main tower. Both the missile launcher and laser cannon can disconnect and be held by Prime; his LED-fist will illuminate the laser cannon like it does his sword. Additional missiles and a second rocket are stored in grooves inside the sides of the trailer.
(translated from the Japanese Wikipedia article) The Transformers: Kiss Players was a Japan-only line of Transformers toys, manga, and audio dramas released in 2006. Kiss Players is set in an alternate Transformers universe where the Transformers are powered by the kisses of young girls. The toys themselves come packaged with small, scale figurines of the girls who power them. The toyline was openly admitted to be aimed at a specific part of the market — adults, rather than children. The comic that accompanied the Kiss Players was an unashamed reflection of this, with several images which were considered by some to be very sexually themed.
The percentage in the title is not a turn of phrase nor something inferred in any way, it comes from a quote by Bumblebee movie producer Lorenzo Di Bonventura. Whether Bumblebee is a prequel or reboot (or anything in between) has been a hot topic for fans , especially those who want to distance themselves as much as possible from the previous films made by Michael Bay. These debates have reached Bonaventura who sat down with Metro and explained why to him, the Bumblebee film was 100% a prequel - Read More
It should be noted that in the lead up to the premiere of the Japanese translation of this series, TakaraTomy marketing director Masahiko Yamazaki indicated changes would be made to place it as a prequel to the 2007 Transformers live-action film. This would have made this version of Optimus Prime an earlier version of the film character. In practice however, the only changes that were made consisted of trimming for time to allow additional promotional material to be added to the start and end, and the name change of Bulkhead into "Ironhide" (with Ironhide becoming "Armorhide"). The future 22nd century Detroit setting and characterizations of the cast remain as they were in the original production.
Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.
This Cybertron spin pop consists of a generic handle with an Optimus Prime sticker, topped with a figurine of Prime through which the included lollipop slots. When the handle is squeezed, a manual gear mechanism spins both the figure and lollipop—no batteries necessary! The handle was also redecoed in orange for a Megatron spin pop, with a figure of the Decepticon leader on top.

The first reissue of the original Optimus Prime toy in North America since the Generation 1 toyline reached its end, this "Commemorative Series" edition of the figure was a Toys R Us exclusive. It was mostly identical to the original figure, save for some necessary modifications made for safety reasons: In the first instance of what would become a recognizable alteration to the mold, the toy's smokestacks were shortened, while the Combat Deck's firing missiles were elongated to prevent potential choking, as was the case with all other Commemorative Series figures' firing missiles. This release also had the trailer's launching feature removed.
Optimus Prime has fictionally shown a dislike of certain kinds of music and dance. For the Marvel Comics continuity, the letters page for issue 324 mentions he hates the music of Mötley Crüe. In the cartoon continuity, "Blaster Blues" and "Quest for Survival" have Optimus react noticeably more passive-aggressively to Blaster's choice of music than the other Autobots. And in the Dreamwave Generation One continuity, Hardwired features an uncalled for negative remark about Jazz's dance skills.

For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.


Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, save for his head, which is only able to move up and down. Said head is also by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate, instead featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.
In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
Available only via mail-order through Dengeki Hobby magazine, the "Limited Black Version" of G1 Convoy is just that: a straight black repaint of the G1 Convoy toy. He comes with all his original accessories, appropriately redecoed (including a silver version of his axe), as well as a gold-chromed version of the "Calamity Defenser" Solitarium weapon that came with Psycho-Orb.
At about 2/3 the size of the Smallest Transforming Transformers, this diminutive version of the original Generation 1 Optimus Prime toy is the smallest figure of the Autobot leader made to date. It was sold as part of Takara's blindpacked Mini Toy Shop Collection line, a series of miniaturized figures from numerous classic Takara toylines, including Transformers, Microman, Licca-chan, Choro-Q and others. Both of Prime's modes are represented by non-transforming individual figures, which come together in a two-pack. In-box, his truck form is even packed in a miniature recreation of his original Japanese packaging, which also includes a shrunken version of his sticker sheet. A tiny version of the original Takara Transformers catalog completes the set.

In this universe, Optimus Prime transforms into a fire engine. The front section of the vehicle detaches and becomes Prime himself, armed with "Blaze Blaster" cannons. To attack, he is able to use his headlights, known as the "Fire Flash" attack, and leg wheels, known as the "Gyro-Strike". The rest of the vehicle transforms into a mobile battle station/refueling port/communications array and can combine with Prime as additional weapons and armor, forming his super mode referred to as "Super Fire Convoy". The ladder/hose section houses Prime's Power Stream water cannon, capable of shooting freezing streams of water, called his Blizzard Storm attack. It also contains a quartet of rocket launchers. In super mode, his feet contain missile launchers than can mount to the shoulders of his regular robot mode. In this mode, he can fire his fists for his "Flying Fist" attack.
Based on his appearance in War for Cybertron, Generations Optimus Prime transforms from a red, blue, and silver robot into an "armored truck mode." He comes with a hand-held rifle that is held via either of its two 5mm posts, and can fold up to store in either mode. He features additional 5mm ports on his forearms, roof, and front-wheel panels. Optimus has a stylized sculpted Autobot insignia on his back, as seen in the game, but it is obscured by kibble.

The cab is yet another iteration of the original Optimus Prime/Convoy toy, based on the Ultra Magnus retool, as distinguished by the elongated hubcap pegs on the front wheels. Indeed, the iPod-aesthetic, all-white deco would make you think this figure should be Magnus, but no, the packaging clearly says "Convoy", making it twice in one year that Takara has released a white-redeco Prime that isn't Magnus.
Labeled as a "Triple Changer", Striker Optimus is a redeco and retool of Dark of the Moon Supreme Class Jetwing Optimus Prime, with new weapons. The base figure has most of the same mold changes as Jetwing Optimus Prime (see below), but has been altered further; in particular, the transforming smokestacks and fuel tanks/ion blaster parts have been replaced with retooled regular tanks that now function as mounts for the new accessories. The colors on the toy are darker than Jetwing Optimus, with a different flame deco that extends farther along the sides of the toy. Additionally, two new 5mm holes have been added to the gray hinge behind the cab in order to accommodate the Toys R Us Japan-exclusive battle blade accessories. The "I am Optimus Prime" saying of Buster Optimus Prime has also been replaced with the "We must stop the Decepticons!" saying of 2010 Transformers Optimus Prime, although batteries are not included.
Punch reported back to Optimus on what he had learned about the Decepticons as Counterpunch. Mainly, that they were planning on attending BotCon 2010. Optimus then turned to Teletraan I for more information about BotCon. Upon learning that special honors would be held for him at the convention, Optimus led his troops to BotCon once more. BotCon 2010 Promo
Never one to give up, Optimus managed to down Devastator in return, only to find himself at Megatron's mercy. The Decepticon leader pointed out to him the humans' self-obsessed behavior in the face of the devastation, suggesting the fleshlings were worthless, and the Autobots should join the Decepticons in wiping them out. Prime Directive #5 The heroic actions of a team of firefighters and other humans proved to Optimus that the humans were worth saving, and the Autobots delivered a smackdown on the Decepticons. The fight was interrupted by the news that a nuclear missile was inbound, and despite Prime's protests, Superion sacrificed himself intercepting it. Prime recovered from the shock wave to find that the Decepticons had fled. He appealed to Grimlock to return to the Autobot ranks, an offer turned down by the Dinobot. Prime Directive #6

Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.
A movie tie-in game for the sequel to the 2011 movie Transformers: Dark of the Moon was released a few weeks prior to the movie on June 14, 2011 (the movie is set to be first screened on July 1, 2011). It has similar gameplay and features as that of the War for Cybertron game as it's made by the same developers, High Moon Studios. The game takes place on Earth just two years after the events of Revenge of the Fallen and will focus on both factions in their "final battle". Adjustments to the previous concept of the game had been made, including the online multiplayer where you can customize iconic characters appearance, abilities and weapons rather than the unknown transformers that were in the game prior to this one by High Moon Studios where you could only customize the appearance, abilities and choose the weapons.
Distant Thunder was ultimately unsuccessful, but as the universe started to rip apart, a black Optimus Prime clone appeared. The Binaltech universe was split into its own separate continuity, while the original timeline was also restored, stabilizing the multiverse. The clone, friendly to the transformers, proclaimed that the Binaltech universe must be allowed to continue, as it was important to the future. Optimus Prime questioned the black doppelganger, who explained only that he carried "the Protector's" spark, but refused to reveal any more detailed information. Soon after, the clone, who was originally developed by Dr. Archeville as a weapon of evil, ejected the spark that had invaded and taken over the black figure, reverting to its original evil programming. The malevolent Nemesis Prime, no longer just a black version of Optimus, escaped.
Optimus Prime landed in the Himalayan Mountains with G.I. Joes Flint and Hawk. As they searched the area, the trio was attacked by Bludgeon in his Pretender shell. Prime whacked him with his energon-axe and in return Bludgeon bearhugged him and coated him in metal-eating slime. Hawk, still carrying power from the Matrix, helped Prime break free. Optimus then shot his way into the hidden kingdom of Cobra-La.
Like the previous Prime, it is loaded with features, though it ditches the first movie's Automorphing for the new Mech Alive gimmick. When a grey tab on his midriff is pressed, Prime's entire pectoral region "flexes", lights in his chest and eyes glow, and he declares "I am Optimus Prime" in Peter Cullen's voice. For the European release of the figure, to get past the language barrier, the Cullen sound clip is abbreviated to just "Optimus Prime"; in some regions, including Quebec and the UK (but only after a month or two), both versions were made available. A transformation sound effect activates when his torso is transformed, and once Prime is in truck mode, an almost unnoticeable button (a small square located beside the screw for the battery compartment, undocumented in his instructions) is revealed, which activates engine-idling noises.
Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
×