Optimus and Wheeljack returned to Autobot HQ after an absence to find Grimlock had taken leadership. Though they failed to resist him, he soon bored with leading the Autobots and let Optimus take command again. Me, Grimlock, King Impressed with Bumblebee's success as team leader, Optimus assigned Pipes to lead a team. The B-Team Part Deux With Optimus badly damaged and without the Matrix, the Autobots were driven off Earth and sought refuge on Cybertron. Once Optimus had recovered, he put together a team which returned to Earth and retook it from the Decepticons, with Optimus badly damaging Megatron in combat. All Hail Megatron
Voyager Optimus Prime is a redeco of the toy from the first movie's toyline. Like several redecos or retools of 2007 movie toys, there has been some effort to make this release noticeably different from the previous releases, though the toy ends up looking less accurate to the actual movie appearance than those previous releases. Optimus Prime has a sort of faded Autobot logo on the side of the truck's bunk, and kanji (Chinese characters) on the roof (ending up on his knee in robot mode.) The word "上海将军" means "Shanghai General", while "大将" means "Grand general".
Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.
In Transformers vs. G.I. Joe comics, Bumblebee is offed as well. His ship is damaged during a space chase with Starscream, so he lands on Earth where G.I. Joe and Cobra are going at each other (as per usual). But his fatal mistake was helping G.I. Joe favorite Snake Eyes, who was trying to take on Starscream. In the process, Bumblebee got in the Joe-Cobra crossfire and was ripped apart by missiles. This wasn’t a true death, however. First, Starscream took Bee’s head to Megatron, who wore it on a necklace (yes, really), but eventually the head got back to the Autobots, who planted it back on his repaired body and he came back to life.
This new roughly 11-inch leader-sized mold of Optimus Prime transforms from a robot to trailer/truck combination and back, with the transformation taking cues from both the Reveal the Shield Legends Class and the Robots in Disguise Legion Class toys. Surprisingly, he does have a reasonable amount of articulation, including a balljointed head and hinged joints for his arms, shoulders and legs, plus lateral hinges for his feet. His head includes light-piping and, unlike other Cyber Series toys, his truck windows have actual transparent plastic rather than just being merely painted.
Released in the latter stages of the Cybertron toyline, this redeco of the Leader-class Optimus Prime figure introduced a new colour scheme that several other tail-end releases would emulate. Taking its name from the Japanese version of Cybertron and with a bio noting that this new body depicts Prime after he embarks on his galaxy-spanning mission at the end of the Cybertron cartoon, "Galaxy Force" Optimus Prime replaces the original toy's blue parts with black and the translucent blue with smokey clear, and moulds several—but not all—grey parts out of red plastic, including the toy's rifles, rail gun covers, missile launchers, and Super Mode leg guns. In the realm of new paint operations, Prime now sports all four Cyber Planet Key symbols on his shoulders, and his unique Matrix-shaped Cyber Key (now with the code lo9x) finally has a gold-painted border, as it had always had in Japan. Additionally, Prime's hip joints were tightened up with this release, making it easier to stand him up in Super Mode.
As seen in the episode "War Dawn", Optimus Prime began his life as a robot named Orion Pax, a mostly defenseless dock worker during the Golden Age of Cybertron nine million years ago, with a girlfriend named Ariel and a best friend named Dion. During this time, a new breed of robot with new flight capabilities appeared on the planet that Orion idolized. When Megatron, the leader of the new group of robots, approached him with inquiries about using one of the dock warehouses, Orion was swayed by Megatron. Both Orion and Ariel were severely wounded when Megatron and his forces attacked in order to claim the energy stored there. Searching for someone to help them, the time-displaced Aerialbots took Orion and Ariel to the ancient Autobot, Alpha Trion, who used them as the first subjects for the new reconstruction process he had developed involving rebuilding the frail Autobot frames into more battle-hardy configurations. With this reconstruction, Orion Pax became Optimus Prime, the first of the Autobot warriors.
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball joints. He can also hold small weapons, such as Cyberverse.
Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.
GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R

What I find more interesting is who’s in this wave. Not only is there Hot Rod and Barricade in ’80s muscle car form, but Optimus Prime in his red G1 Peterbilt truck form (just with movie Optimus’ head! Maybe Bumblebee will explain the origin of his “rip off everyone’s face” fetish). Two versions of Bumblebee round out the wave, his traditional movie-verse Camaro and G1 VW Bug.


This Wal*Mart-exclusive two-pack pairs the deluxe-size Classics Optimus Prime figure with live-action movie line's Fast Action Battlers Power Hook Optimus Prime toy. Both toys are identical to their original releases, and together represent the Optimus Primes of the oldest and newest generations (at the time) of Transformers, respectively. The movie Prime is designated "2007 Optimus Prime", while the Classics figure is dubbed "1984 Optimus Prime" (referring not, of course, to the toy, which was produced in 2006, but to the character).
The "Underbite Jetpack Takedown" Optimus Kreon uses the new 2015 style of Kreon hips and torso, with a hollow hip-peg and a central post inside the torso for increased grip... which also makes them incompatible with about four years' worth of Kreons. Based on his appearance in Robots in Disguise, he features a new version of the Optimus helmet, this time lacking a moutplate. He attaches to an included jet pack, armed with two pressure-launch missiles.
Inspired by a 1985 special limited release of Optimus Prime with bonus Pepsi decals for his trailer in the US market, Pepsi Optimus Prime sports an egregious number of new new Pepsi-themed paint masks and decals, as well as an entirely new trailer unit, specially designed to carry a single 500ml-size bottle (a common size in Japan), three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan).
In reorganizing the company, LEGO became more efficient. The data shows that they have been able to standardize costs and it is likely that they were able to hedge the price of plastic against future price fluctuations. In protecting their business, they have also been able to normalize prices for their customers. A stable price is good for everyone; it helps LEGO ensure that future production costs are budgeted for and it helps the consumer manage their budget. This allows LEGO to protect and grow its market share.
"Optimus Prime Figure" (オプティマスプライム・フィギア)[1] is a redeco of 2001 Robots in Disguise Spychanger Scourge, painted to resemble Movie Optimus Prime. Of note is the tampographed detailing on his chest resembling Movie Prime's distinctive chest design. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Rounding out a bumper year of Japanese-exclusive Generation 1 Optimus Primes, the Takara-licensed Kawada brand Diablock Convoy is a fully transformable Lego-style block building figure similar in premise to the earlier American Built to Rule sets. The Diablock figure, however, easily outstrips the Built to Rule sets by both being an accurate representation of the toy on which it is based, and being able to transform between modes without having to be partially disassembled and put back together first.
The color scheme of this special redeco of Super class Optimus Prime was decided through a colouring contest held in the December 2004 issue of TV Magazine, in which entrants coloured in lineart of Prime in the scheme they wanted to see. The winning entry rendered Prime in a... distinct palette of grey, cream, dark red, and purple chrome, with blue, white, and yellow drones. It was limited to only ten pieces, making it one of the rarer Transformers toys in existence.
While Transformers ended poorly for the US market, the same can not be said for the UK, Canada, and Japan markets as they went on to produce their own continuing series between 1991 and 1993, despite the UK market in particular missing a substantial amount of figures prominent in the comics and animated series throughout the line's run. Each country produced their own continuity. The UK and Canada continued with new Action Master figures and introduced the Turbo Masters and Predators. Japan continued with the Micromasters concept.
He made it out of the building and ran into the real Sunstreaker, who blasted the 2 clones following Hot Rod. Sunstreaker ignored Hot Rod's warning about Scorponok's army and stormed into the building so Hot Rod painfully wired himself to send a distress signal. When Sunstreaker's real head was later disabled by Hunter, the Headmaster clones shut down, which Hot Rod explained to Grimlock. The group was surprised by the arrival of Shockwave, but Ultra Magnus had heard Hot Rod's distress call and was on his way to Earth. After Scorponok knocked out Sludge and Grimlock tended to him, the remaining Dynobots offered Hot Rod a lift aboard the Monsterbots' ship. He refused though, and made it back into Machination HQ to take care of something "personal". He eventually found Scorponok's real head. Hunter also showed up and let Hot Rod know how to disable it, but before he could do so, Scorponok grabbed him. Before Scorponok could crush Hot Rod's head, the Dynobots showed up and began to battle Scorponok. Hot Rod told Swoop which wires to sever, and he did just that, reducing Scorponok to a catatonic state. Ultra Magnus arrived took everyone back aboard his ship, which later docked with the Ark-32. Within 3 days, Hot Rod was fully repaired, with a new body form design.
Hasbro's Toys R Us-exclusive 2003 reissue of Powermaster Optimus Prime was actually a modified version of Takara's then-recently reissued God Ginrai set. As such, the cab was partly constructed out of die-cast metal, vacuum-metalized plastic and had clear blue windows. The trailer was retooled so the super robot's fists could slide in and out of the arms. This set also included the originally Japanese-exclusive Apex Bomber drone trailer that attached onto the back of Optimus Prime's trailer in vehicle mode, and could become extra armour in super robot mode.The missiles where unchromed and lengthened due to safety issues as opposed to the Japanese release which were chromed and shorter.
The box seems to have been created rather hastily from the Japanese original. It is roughly identical to the Tomy release, but with the Japanese text edited out... mostly. Random Japanese text remains floating in space on the top of the back panel and underneath the "Jetwing Optimus Prime" name on the front. Curiously, the left flap has been rewritten to eliminate mention of NEST and the jetpack's ability to detach, while the right flap has been (badly) edited to remove all mentions of MechTech.
Unusually for the smaller Voyager Class of toys, Robo-Vision Optimus Prime comes packed in robot mode in a special hexagonal column box with many windows, similar to the original packaging for 20th Anniversary Optimus Prime. The package also includes a Robo-Vision Decoder. Strangely, this Target exclusive preceded the release of the regular Voyager by a large margin, coming out on June 2, 2007 with the initial wave of movie toys.
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.

Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.
Optimus was checking up on the Autobots' ongoing energy collecting campaign when Wheeljack informed him that a disturbance in Sector 33HM of space-time would eventually cause major problems in its time-stream. Optimus assigned the investigation of this disturbance to Bumblebee, then noted that Hot Rodimus had not completed his latest report, communications with the young Autobo having been lost while he was on his own mission. With a brief inspirational speech, he urged his subordinates to redouble their efforts in maintaining harmony throughout reality. Little did Optimus suspect that in his own universe, Megatron was planning a coup against the Autobots... Uprising
He comes with the Star Saber, which has a 5mm handle and a post on its hilt, as well as two spring-loaded, missile-firing "Ionic Pulse Launchers" (which are called "Eaglefire Missile Launchers" in the instructions). The launchers each feature a 5mm post, have flip open prods, and can peg onto the ports near the wheels on his robot back, giving him a pair of back-mounted rocket engines.
Released as part of the Single Pack assortment, Optimus Prime is a show-accurate, non-transforming die-cast vehicle based on his alternate mode. He features through-axle construction, allowing for super-speedy racing on smooth surfaces, and his car mode is compatible with many tracks and playsets from Hot Wheels and Matchbox. He features 4 wheels, as opposed to the Legion Class' 6 wheels & his larger toy's 10 wheels. Optimus Prime also comes with a collector's flyer.

On another plane of existence, Optimus travelled the path to the Matrix, guided by the voice of his old mentor Alpha Trion. The path led him to Grimlock, who had also been killed by Megatron; Prime rescued Grimlock from Kremzeek, the demonic eater of souls. At the gateway to the great beyond, they encountered Bludgeon, who announced that only those who bore the "key to Vector Stigmata" may pass through. Prime realized that the wounds on his body form the key, but the angel insisted that these would grant Prime access. Prime took Grimlock's sword and bestowed the key on Grimlock, allowing the former Autobot King to ascend into the Matrix while Prime stayed behind. Transformers vs. G.I. Joe #12


Although Rodimus plays the part of the brash youth, he is actually very intelligent, and has no loyalty to Optimus Prime; only his own personal gain. According to his biography, Rodimus used to be leader of the Wreckers, a mercenary group hired by Optimus Prime; but after the deaths of the other members, he joined the Autobot Seekers under the command of Goldbug.
Optimus Prime is another redeco of Revenge of the Fallen Legends Class Optimus Prime, features gunmetal-stque grey plastic, and his paint operations being similar to the first Revenge of the Fallen Legends Class toy. He is also packaged with Grimlock, himself a redeco of none other than Energon Cruellock. Like other Legion-themed product, he is exclusive to Walmart in the US and Asda in the UK.

With the failure of the Generation 2 series, Hasbro and Takara decided the franchise needed an overhaul. They went in a new direction and a new beginning. While there had been Transformers that change into robotic animals, the premise of the new line was that all figures would transform into animals with realistic appearances. The Beast Wars toy line was launched in the autumn of 1995, and Mainframe Entertainment produced a computer-generated imagery, or CGI, animated series program to tie in with the new toy line. A fresh idea coupled with a TV series program with strong stories assured this series the success Hasbro and Takara needed, as this series was a giant hit in international markets as well as in Takara's home market, Japan.

If he didn't send Sludge with them, the odds were 2 to 1 that the Autobots would all be destroyed as part of Operation Black Coral. The one possible positive outcome ended with Optimus fighting a duel against Megatron atop Mount Lomas in which Prime (somehow) split into his three components to surround his archenemy. This provoked Rumble into "assisting" his leader with an earthquake that destroyed the Decepticons' entire superfuel operation.

The main difference is an extensive redeco, rendering Prime in his traditional colours instead of the iPod-inspired white. (Yes, it actually had more to do with iPods than Magnus, believe it or not.) Reminiscent of the Kiss Players, iPod Optimus Prime's entire ABS/PVC structure is painted over, including his fists and the silver stripe that runs along his chest. His wind shield is colored blue like the one in the 2002 New Years Convoy reissue. The silver-grey trailer has a fairly elaborate deco, featuring detailing that resembles the outward appearance of the traditional Prime trailer, including the doglegging blue stripe and Autobot symbol, an effect somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three, count 'em, three logos proclaiming the name "Optimus Prime". The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this would be largely covered by the intended insertion of an iPod.


Apparently, early plans for the shield were to have it colored gold and silver, but it was later changed to gray and red. When a hand-painted prototype of the toy was first displayed at the 2013 New York Comic Con, the shield was colored yellow and silver; in addition, the original versions of the official Hasbro stock photos also depict the gold color, but the versions featured on the back of the toy's packaging were edited so they would accurately depict the final toy's colors for the shield. Meanwhile, the versions of the stock photos provided to websites and online retailers depict the shield in its final colors for the robot mode, whereas the vehicle mode photo is the unedited version featuring the shield's original colors. Furthermore, UK-based retailer Argos also featured unedited versions of the stock photos for both modes in one of its catalogs, causing some confusion among fans.[5] Sometimes, the spring loaded "Automorph" feature in his head is too strong and causes the head to fly off...
The Optimus Prime Battle Rig Blaster transforms from a superdeformed amalgamation of his Movie truck and G1 Optimus Prime's truck (indeed pulling G1 Prime's trailer) to a fully G1 robotic forearm and hand with a built in Nerf style gun. By simply placing your hand inside the back of the trailer (I need an adult!) and pulling back on the front of the truck, the gun transforms and folds back into a weapon. It comes with three Nerf N-Strike size whistle darts which can be stored inside the trailer. Although not shown in the image, the truck front splits in half in gun-mode, while the grille acts as a sight. This toy was marketed as 'Optimus Prime Big Rig Blaster' overseas.
A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile.[76] With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.

Exclusive to Japanese ToysЯUs stores, this redeco of AM-01 Optimus features warmer, metallic shades of plastic, replaces the gray plastic around his windshield-chest with red, and replaces the clear-blue plastics with clear-black. He comes with the Hasbro version's battle sword, which is now a darker, warmer shade. For Arms Microns, he now comes with O.P. A, Pral G, Sais G, and Jayz G, and the latter three can combine to form a golden version of the Cosmotector shield (hence the name).


Released in conjunction with Japanese cellphone maker au[10], au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
Entertainment Pack Optimus Prime is a slight redeco of the SDCC figure, with some deco differences between the SDCC release; this version has gray windows instead of blue and is missing some of the silver deco on the helmet and roof/feet, as well as the yellow paint on his lights. His midriff is also darker. Optimus also comes with a similarly-scaled Megatron and PVC figurines of Jack Darby, Miko Nakadai, and Raf Esquivel.

Optimus later led a convoy in search for a building site for Autobot City, which ran into a Decepticon ambush. Rodimus Prime remembers the Transformers greatest battle on Earth. He sent off several Autobots to get help, knowing this was the only chance of victory. Transformers Combat Data Those several Autobots were seen again, but Prime... wasn't. 

Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.

The single carded release of Optimus Prime is a redeco of Revenge of the Fallen Legends Class Optimus Prime, exclusive to Walmart in the US and Asda in the UK. Deco changes included in this toy are the top half of the knee armor's blue being omitted and an Autobot insignia tampographed on the left knee, and similar to the Legends Class Power Armor Optimus Prime: the red arms, and the abdomen was replaced into blue.
Here is another thing, people complain about the presence of stickers in a LEGO set. I have news for them, stickers keep down the cost of a set. The latest modular building will have stickers with it, but it isn’t the last time a set geared toward adults will have stickers with it. At least LEGO listened to our wishes and got rid of STAMPS (Stickers across multiple pieces). Still that modular will be the only set that will have a red baseplate and printed golden star tiles. Translation, that set will be very hot on the secondary market when it is retired. It is going to be very hard to source out the baseplate if people try to build Palace Cinema by sourcing its parts. (Which is a project some are doing with Cafe Corner and the UCS Falcon)
A Deluxe-sized figure sold only in Japan and Asian markets by Takara Tomy. The package consists of a highly poseable skeletal frame called a Core Body, along with parts to assemble the Core Body to either a Protoform mode or robot mode. In Protoform, the figure can transform into an atmospheric Entry Mode. The figure with robot parts is able to fully transform into vehicle mode.[87]

Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love, in bed.


The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, and bumpers (and thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners, and the windscreen visor. In robot mode, the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
Summer of 2017 will bring us the fifth Transformers movie, The Last Knight. It’s said that it will be a little different from the previous films; an entry point for new viewers that will help launch a series of spinoffs or stand-alone movies. And the first of those spinoffs is a Bumblebee movie, slated for release in the summer of 2018. At one point, Michael Bay said he would love to make an R-rated, Quentin Tarantino-style movie featuring Bee, but that’s not likely to come to fruition, considering how much kids love the character.
Part of the fourth wave of Prime: Beast Hunters Cyberverse Commander Class toys, Beast Blade Optimus Prime is a jungle-themed green and blue redeco of his Series 3 Cyberverse Commander Class toy, coming with a new Battlewing Shield accessory in addition to retaining both the Thunder Lance and Star Saber. His shield can open up to form wings, and can be pegged onto the ridge on top of the vehicle's cage compartment, or mount onto the screw-hole on his, er, robot butt.

Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
Optimus Prime (Clear Ver.) is a redeco of Revenge of the Fallen Legends Class Optimus Prime in black and clear blue plastic, available only in the August 2014 issue of TV-Kun magazine. His only paint operations are on his abdomen and face, but stickers for additional detail are included on the issue's sticker sheet. Optimus Prime has been slightly retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock.
Megatron is captured by the Autobot Targetmasters in the episode "Do Over". When Optimus learns Megatron has been captured, he rushes to be the one who kills his old enemy, despite the closing launch window of the Ark. When confronted by Optimus Prime, Megatron attempts to use the Autobot Targetmaster Nightstick to shoot the Autobot leader, but Nightstick takes control of Megatron's arm. Megatron then tricks Optimus into using Megatron's own sword to cut his hand off, freeing him from Nightstick. Optimus fails to kill his foe and misses the launching of the Ark, which has been taken over by Rodimus. He then takes out his anger on Blurr.
According to the bio printed in the Transformers Collectors Club magazine, Optimus Prime was a member of the Cybertron Dimensional Patrol, but was abducted by Unicron. It is unknown whether he repainted himself yellow before being abducted or if the recoloration was due to the radiation emanating from Unicron, which has a tendency to recolor Cybertronians.

The single carded release of Optimus Prime is a redeco of Revenge of the Fallen Legends Class Optimus Prime, exclusive to Walmart in the US and Asda in the UK. Deco changes included in this toy are the top half of the knee armor's blue being omitted and an Autobot insignia tampographed on the left knee, and similar to the Legends Class Power Armor Optimus Prime: the red arms, and the abdomen was replaced into blue.


Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More

Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
This increase in average piece count could be a factor in why LEGO is perceived to be more expensive now than in the past. LEGO sets have become larger and more complex. They have started to market directly to an older crowd with sets such as the Modular Buildings and the Architecture series. These new sets have rekindled interest in LEGO for an older generation but at the same time, it has introduced this same generation to the relatively high price of LEGO sets.
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.[4]
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
The other new additions were two black spring-loaded missile launchers that fire red projectiles. In vehicle mode, these attached to the soundbox (an echo of Powermaster Optimus Prime's cannons, perhaps), and could be held in Optimus Prime's fists in robot mode. These launchers were not created for Prime; they were retooled versions of the launcher from Barricade of the G.I. Joe line.
This mold was redecoed into Universe Optimus Primal and Beast Wars Telemocha Series DX Convoy, and retooled into Beast Wars Reborn/Beast Wars Tenth Anniversary versus pack Optimus Primal. Takara also created multiple special variants, including all-gold (from Tele-V Magazine, only ten awarded), red and gray (Tele-V again, but only one awarded), and blue-fur (a Comics Bom Bom design-contest prize, only five awarded).
×