In light of this news, if Optimus decided to nonetheless head back directly to Autobot headquarters, his squad returned to find their comrades nearly dead from the poison. But with Ratchet’s help, the antidote was quickly distributed, and the Autobots sprung back to life. Now cured, the Autobots discussed their next course of action; they had to prevent the Decepticons from poisoning the nearby water reservoir.
Oh, also, I should add that I would like to see if this trend is the same for specific themes, or just over all themes. Although I would guess that the individual themes would show the same general trend you discuss here, one reason individuals might believe in the “price increase fallacy” might be because of the individual themes they support. But again, I think that if you do this, you will find the themes fit the trend as well. If you are looking to go into the numbers more, this might be an interesting area to investigate.

Part of the second wave of Warrior class figures, this Deluxe-sized Optimus Prime transforms into a futuristic trailer truck. Due to his simple transformation scheme, he has a faux window chest in robot mode, while the end of the front trailer kibble has extra toes. Optimus Prime also comes with an axe, which was based on the Energon Axe weapon from the War for Cybertron game. Undocumented in the instructions, Prime's axe can store between his trailer, or plug into ports on either of his shoulders. His scannable Autobot insignia is on his robot mode left shoulder and is easily scannable while still in-package.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.

In a break from tradition, Energon Optimus Prime's large mode resembled a configuration similar to Voltron or to the Super Sentai action figures. This design was unpopular with many fans due to design issues with the toy. The small robot's body was large in proportion to his arms and legs which made the figure appear fat, earning it the nickname "Fatimus Prime" or "Obese-imus Prime". The 4 vehicles that combined with the robot were small, lacking the intricate detail that made other toys in the line popular. Fans were also angered by early releases of this toy in which the head was molded with a mouth rather than the traditional face plate design. Later releases of the toy eliminated the visible mouth feature.


As a result of striving for vehicle realism and painstaking accuracy to his visual portrayal in the live-action films, this Optimus Prime ends up being ridiculously complex. Transforming him back into a truck is probably more complicated than shown in the movie and can only be considered torture. Very unfortunately, the instructions for this toy are infamous for being amazingly vague and unclear in their visual depiction of the transformation steps, making transformation even harder. Also, let us not forget that, upon transforming him back to robot mode, he will declare his identity over and over and over and over and over until you're finished.
Available only at KB Toys, Machine Wars Optimus Prime is a redeco and slight retool of the European Generation 1 exclusive Turbomaster leader Thunder Clash, transforming into a Cybertronic truck cab. It's easy to see why Thunder Clash was chosen to become the new Optimus Prime, given his adherence to Prime tradition: the cab disconnects to become the robot, while the trailer unfolds to become an assault tower with twin missile launchers. On the original Thunder Clash version of the mold, the launchers operated on a gravity-feed system that saw a new missile drop into the launcher from above each time one was fired, allowing for twelve to be fired in rapid succession, but for Machine Wars Prime, this feature had to be dialed back for safety reasons. The missiles had to be lengthened to prevent choking hazards, and so the toy's launchers were modified to accommodate them, becoming straightforward spring-loaded single-firing weapons.
Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
Instead of his trailer, Prime can alternately combine with Armada Jetfire, who forms a pair of legs, as "Jet Prime" (Jet Optimus on the cartoon, or "Jet Convoy" if you own the Japanese version). In addition to this, Armada Overload can form a pair of massive cannons that attach to either Prime's base mode, or mount over the shoulders of his super robot torso (with either his trailer or Jetfire as legs), forming Optimus Prime Megaweapon (or Magna Convoy).
But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.

Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.

A redeco (or should that be de-deco?) of the Grand Convoy Super Mode Pla-Kit, Grand Convoy Super Mode White Version was available exclusively on July 17th and 18th at the Japanese convention, Kodansha Super Chara Festival 2004 ("K-Fest"). It is a solid white version of the normal model kit, possessing all the features of the normal figure, which was intended to be used in a customization/painting contest held at the convention. It lacks the comic of the normal release.


Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!
Following our last article on in hand images of Studio Series 38 Voyager Class Optimus Prime (from the Bumblebee film), TonTon Reviews (who put up the in hand images), has come through on what they said and posted their review! This review allows us to get the best look at the toy yet, as well as its surprisingly complex transformation. We see the ion blaster included stores between his legs in truck mode to fill in the gap and hold it togethyer. The backpack in robot mode also has 5mm - Read More

LEGO has changed a lot in its history. It started as a wooden toy company before it discovered the benefits of molded plastic. Since the advent of the brick, we have been able to build everything from houses, to spaceships, to working robots. The increased detail and wider product line has allowed for the blossoming of the idea of LEGO as an art medium7. LEGO bricks walk the line between giving people more pieces that can be used to add detail and restricting the pieces to inspire creativity. There is a balance that can be seen through the amazing works, both large and small, that can be done with a bit of patience and an eye for plastic.
Outstanding work here. After reading a number of complaints about how the price has ‘increased’ over the years, it’s great to see this analytical approach. One additional hypothesis I have is related to the increase in the number of sets released each year, which would appear to be supported by your data. More sets to buy to be ‘complete’ makes for more money out of pocket.
An undocumented transformation step includes flipping Optimus Prime's knees out in vehicle mode to form a back bumper with tail lights. Oddly, the toy itself and the package art show Optimus Prime with four fingers on each hand, while he has 5 fingers in the video game. The vehicle mode pictured here is minimally mis-transformed: The exhaust pipes have not been rotated to hide the indentations against the vehicle body. The instructions show the rifle being plugged in by its shorter peg, but the packaging depicts the rifle stored by its grip, which keeps the weapon higher off Prime's body, but is also more secure.
The Joes discovered a cavern where the people of Cobra-La were growing metal-eating spores as a last defense against Unicron. Flint and Cosmos took a load of the spores into space just as Unicron appeared in Earth orbit. Prime, Hawk and Colton headed deeper into Cobra-La to rescue Firewall and kick butt. Prime was tackled and pinned by a giant bug creature, but made a dramatic recovery and tossed the bug aside. He then took the machine-hating Cobra-La leader Golobulus to task with a single punch. Flint and Cosmos released the spores, which devoured Unicron from the inside and defeated the giant Transformer before he could harm Earth.
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
The third version [5] would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and triple changer. The Headmaster also would have been a triplechanger, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.
Optimus Prime appears as leader of the Autobot forces in the Transformers: Timelines story "Shattered Glass" by Fun Publications. When Cliffjumper, the Generation 1 character from a parallel universe, is seemingly discovered alive, Optimus welcomes his old friend back to the Autobot fold. After learning that Clffjumper is not the evil Autobot he remembers, he shoots Cliffjumper and leaves him to fend for himself in the Rad Zone. Optimus plans to launch his new warship, the Ark, to conquer Earth, but Cliffjumper aids Megatron's heroic Decepticon forces in a successful attack on the Ark's launch platform.[175]

Available only via mail-order through Dengeki Hobby magazine, this black and gray redeco of Optimus is one of four "Black Body" promotional Robot Masters toys made available through different outlets simultaneously. He came with his normal accessories (it is worth noting his axe was solid silver), plus a chromed-gold clear-red-plastic version of Psycho-Orb's "Calamity Defenser" solitarium shield.


We know that despite starting his fictional life as a lovable, horn-headed robot who could turn into a Volkswagen in Generation 1, Bumblebee's most well-known these days as a round-headed robot who turns into a Camaro. In fact, younger viewers might not even realize he was ever anything but the Chevy muscle car. But there’s one quirky continuity where he’s able to switch between original and movie modes at will.


A redeco of the sword-wielding version of Battle Masters Optimus Prime, Silver Knight Optimus Prime is a non-transforming "Rock 'Em Sock 'Em Robots"-like toy with arms that punch through the use of levers in his legs. He can also be placed on the included controller handle, allowing the punches to be activated with a pair of triggers. Optimus Prime was only available in a Target-exclusive two-pack with Grimlock.
The centerpiece of the power-up robot mode is Prime's gigantic Ultimax Super Cannon, an electronic light-and-sound weapon the size and mass of a Deluxe figure. The whole cannon attaches to a special socket slightly behind Prime's shoulders, can store on the back or flip over to be gripped in both fists in armor mode, or stored upside-down underneath the trailer in truck mode. When pointed forward, the cannon has a larger helmet styled after Prime's own with a large translucent face shield featuring a painted targeting system. The weapon has three electronic modes: each of two small buttons plays its own weapon-firing noise and flashes one set of lights, while the large pull-switch in the cannon's center plays the sounds of a powerful barrage, flashing both sets of lights and (every third time) finishing off with the declaration "I am Optimus Prime". The Ultimax Super Cannon also has two of its own 5mm ports for even more MechTech firepower. When mounted on his back, the Cannon has two hook-like sections that securely lock into the "backpack", allowing the Ultimax weapon to serve as a handle for Optimus' imaginary "flight" operations.
In the past 80 or so years, the yo-yo has seen some pretty mundane innovations, such as a ball bearing axle for better spin efficiency and the addition of flashing lights, to name a few. But finally, someone has rolled up their sleeves and is ready to fuck shit up all over the yo-yo world. Meet the ReGEN; half yo-yo, half MP3 player and just a pinch retarded.
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
Optimus includes an spring-loaded missile firing "ion cannon" modeled after Megatron's shotgun from Dark of the Moon, with the missile features a sculpted shotgun nozzle on the front section. It can be held in his hand or attached to the top of the truck cab or truck bed via 5mm post, and, in an unadvertised feature, sports tabs on the rear-most handle that allow the Dark of the Moon Voyager Class Megatron toy to wield it. Also undocumented is the fact that the weapon can be stored under either of Optimus' shoulders.

The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.

The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
A redeco of Cybertronian Optimus Prime with a translucent red front section, additional (painted) "scratched paint" details, some red paint highlights either omitted or changed to yellow and additional yellow circuitry pattern detailing reminiscent of the jammed abilities/mode lock/EMP effect from the War for Cybertron game, available in a Toys"R"Us-exclusive three-pack with redecos of Cybertronian Megatron and Cybertronian Bumblebee.

Optimus Prime is also among the characters who appear in the flash game TRANSFORMERS CVBERVERSE Battle Builder Game.[21] Optimus Prime is one of the Autobots featured in Transformers: The Ride at Universal Studios theme parks. In the ride, Optimus fends off against the invading Decepticons at N.E.S.T. headquarters while telling Evac to escape with the AllSpark shard. He battles Megatron throughout the ride until Megatron is killed by Evac. Optimus then congratulates Evac and the riders for protecting the AllSpark.
Summer of 2017 will bring us the fifth Transformers movie, The Last Knight. It’s said that it will be a little different from the previous films; an entry point for new viewers that will help launch a series of spinoffs or stand-alone movies. And the first of those spinoffs is a Bumblebee movie, slated for release in the summer of 2018. At one point, Michael Bay said he would love to make an R-rated, Quentin Tarantino-style movie featuring Bee, but that’s not likely to come to fruition, considering how much kids love the character.
Like Chomp & Stomp Grimlock, his truck kibble from the back can accommodate One-Steps and Power Battlers (Both Hasbro and TakaraTomy), activating his various voice clips and flashing lights by interacting with the magnets in their feet. He is notably less kibbly than other AOE Optimus Primes...from the front, at least. The back and sides are not so promising with large chunks of Western Star truck kibble hanging off his legs, making him look as if he's wearing a petticoat. At least the jetpack helps balance the whole thing out....

This TakaraTomy Asian market-exclusive Leader Class two-pack consists of a redecoed Jetfire and a slightly altered Buster Optimus Prime. Buster Optimus Prime is almost identical to the single-pack Japanese release of the toy, but unlike the standalone Buster Prime, has a head with a faceplate, itself containing more paint details than the first release of Revenge of the Fallen Leader-class Optimus Prime. The flames are outlined with light blue instead of white for accuracy to the physical truck prop (though it ends up being inaccurate in robot mode). Jetfire has a subtle, more movie-accurate colour scheme.

A redeco of the sword-wielding version of Battle Masters Optimus Prime, Silver Knight Optimus Prime is a non-transforming "Rock 'Em Sock 'Em Robots"-like toy with arms that punch through the use of levers in his legs. He can also be placed on the included controller handle, allowing the punches to be activated with a pair of triggers. Optimus Prime was only available in a Target-exclusive two-pack with Grimlock.


This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.
This mold was redecoed into Universe Optimus Primal and Beast Wars Telemocha Series DX Convoy, and retooled into Beast Wars Reborn/Beast Wars Tenth Anniversary versus pack Optimus Primal. Takara also created multiple special variants, including all-gold (from Tele-V Magazine, only ten awarded), red and gray (Tele-V again, but only one awarded), and blue-fur (a Comics Bom Bom design-contest prize, only five awarded).
This is a weird one. Back in the late-’80s, the original TV show had ended and Marvel Comics decided to take the “transform” part of the property a step further and gave a handful of Transformers an organic, human-looking shell. Bumblebee was one of the lucky Autobots to get one. According to the storyline, the Decepticons developed the technology first, but the Autobots secretly caught wind, made their own human shells, and fooled the bad guys into thinking they were fighting mere humans, until they burst out of their shells.
Accompanied by Prowl, Optimus went to Sumatra and discovered much of the jungle had been destroyed. The Decepticons tried to destroy the Brazilian jungle and take its oil, but once again the Autobots stopped them. Storms of Destruction Following a battle between the Dinobots and the Decepticons, Optimus ordered Slag be repaired by Ratchet at their Antarctic oil supply. Tracking Slag, Megatron attempted to destroy the base with the Crusher, slicing icebergs off the continent. Optimus ordered Autobot superjets to counterattack, but the battle was won when Megatron unwittingly reawakened hundreds of dormant Dinobots beneath the ice. Jaws of Terror Optimus and Prowl were baffled by Megatron's next strategy, a series of hit-and-run attacks in the Pacific rim. It emerged it was a distraction from the enslavement of the population of Buru. Optimus, Prowl and the Dinobots arrived and fought off the Insecticons, foiling the scheme to drain the island's oil. Slaves of the Insecticons When Megatron planned to drain the world's largest supertanker, Optimus had the oil tainted with a corrosive acid, sabotaging the Decepticon submersible. The Autobots flew the tanker to New York City, and ordered the few witnesses' memory to be wiped. Wow. Attack of the Decepticons
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[8] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[9]
The Happy Meal version of Energon Optimus Prime features a very similar transformation sequence to his larger figure, though his limited articulation means that his shoulder insignias aren't visible in robot mode when his arms are facing forward. His torso is hollow to contain his electronic "Energon Cube" accessory, which generates effects when activated by remote control. This remote is in the form of the Mini-Con jet Wreckage, and can mount on the top of his cab in truck form.

Optimus Prime is the Autobot leader on Transtech Cybertron. On Transtech Cybertron, Optimus Prime is a gifted politician who has forged an alliance with Megatron, the militaristic leader of the Decepticons. together, they helped bring forth a golden age on Cybertron. Transtech Cybertron is unique among Cybertrons of alternate universes in that war has not broken out between factions.[171]
Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). The main torso-bot is based on Generation 1 Optimus's original body. Another limb-bot is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
(As an odd postscript to this tale of footwear-induced madness, although the promo pictures all showed the shoeformer as a white and navy blue sneaker that transforms into a white and aqua blue robot, the product actually released sported much darker colors for all the robot-mode parts, with a deep teal instead of aqua, and almost all the white replaced by an icky tan/cream/grey color, including the head. Basically, the figure looks like the promo picture viewed through really dark sunglasses. Although this certainly doesn't make it look any more like Prime, you might argue that it looks a little less like Magnus. Sorta. Maybe. Not really.)

Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.
Hasbro executives, high off the revival of G.I. Joe through the same marketing concept, decided to acquire rights to toys from a variety of Japanese “Super Robot” series. Transformers didn't introduce the concept of super robots to the United States, but for the first time, the genre became widely recognized and popular outside of Japan. As the Transformers brand grew throughout G1, it began to define the genre, and all other super robots were measured competitively to Transformers' standard.
According to an early Universe-style profile published in The Transformers Comics Magazine, Optimus Prime's "official" nicknames were at one point considered to be "Autobot Commander", "Chief", "Big Boss" and "Roller". As far as it is known, no piece of fiction has ever purposely addressed him using these nicknames, though it's a fair bet he's been called "chief" at least once or twice anyway. And technically part of him is called "Roller" with some frequency.

This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
×