The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.

If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
Never one to give up, Optimus managed to down Devastator in return, only to find himself at Megatron's mercy. The Decepticon leader pointed out to him the humans' self-obsessed behavior in the face of the devastation, suggesting the fleshlings were worthless, and the Autobots should join the Decepticons in wiping them out. Prime Directive #5 The heroic actions of a team of firefighters and other humans proved to Optimus that the humans were worth saving, and the Autobots delivered a smackdown on the Decepticons. The fight was interrupted by the news that a nuclear missile was inbound, and despite Prime's protests, Superion sacrificed himself intercepting it. Prime recovered from the shock wave to find that the Decepticons had fled. He appealed to Grimlock to return to the Autobot ranks, an offer turned down by the Dinobot. Prime Directive #6
Produced to coincide with the 20th anniversary of The Transformers: The Movie and its release on DVD by Sony, this edition of Prime is a redeco of his 20th Anniversary figure. It replaces the original's metallic paint with flatter colors and does away with any and all vacuum-metalized plastic, as well as altering several other small details across the body, like the color of the lights on his feet and chest.
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.
Calibur Optimus Prime is a retool of the Armor Knight Optimus Prime figure, who is a retool of the original Age of Extinction Leader Class figure, with the fifth wheel hitch now forming his handheld shield based on the one used in Dark of the Moon, which results in a backpack-less robot mode. He also comes with an axe based on the one used in the third film.
The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.

When the Decepticons turned up in the same forest that the Autobots were taking a vacation in, Optimus took great pleasure in stopping them and returning the forest to pristine condition. Forest Rescue Mission Optimus was undertaking some repairs when Bumblebee offered to help, but Prime told him the repairs were too hard for him. When later the other Autobots were dismissive of Bumblebee's report of a Decepticon attack, Optimus alone listened to him, and they subsequently defeated the Decepticons. Bumblebee's Dangerous Mission
The Masterpiece Optimus Prime toy was featured in a print ad for Nokia 6820 phones in December 2004.[19] He is posed bent over to look at the phone and scratching his head. Pleasantly, most of the pose pictured is perfectly possible with an un-kitbashed, un-Photoshopped version of the toy. (The real toy can't bend forward at the waist like that, alas.)
A redeco of the Wing Convoy Super Real Figure, Wing Convoy Original Figure (ウイングコンボイ オリジナルフィギュア) was available at JUSCO department stores starting on July 30th 2004. The figure was available with purchase of a Wing Saber figure, and came in a plastic baggie, rather unattractively scotch-taped inside the toy's packaging. A sticker was placed on Wing Saber's packaging to note the promotion.
While I don’t think anyone should complain about the price of Lego, I have to say that I don’t think our nostalgia for the 80s/90s is at all misplaced -it really was a better time to be a yuppy/young parent. There were more and better jobs available with better pay, benefits, and less required prerequisites. Young adults today have to work a lot harder to maintain the same lifestyle our parents had..of course there are exceptions, if you are especially gifted you can still make it in today’s world.

In the war for Cybertron eons ago, Optimus was once Orion Pax, a historical archivist in the Iacon library. Throughout his studies on Cybertron's past, Orion became aware of the social inequality among Cybertron's populace. He became inspired by a gladiator taking the name of one of the thirteen original Primes, Megatronus. Megatronus attempted to start a revolution to overthrow Cybertron's current leadership and take the mantle of Prime. However, Orion preached a different ideology, declaring that violence is not the means to achieve justice, and thus, Megatronus changed his name to Megatron and severed ties with Orion, starting the Great War that destroyed Cybertron. Orion soon ventured into the core of Cybertron and was bestowed with the Matrix of Leadership by Primus, becoming Optimus Prime. After Cybertron became barren and lifeless, he and Megatron took their war to Earth, after which Megatron disappeared for three years. With Ratchet, Arcee, Bumblebee, Bulkhead, and Cliffjumper under his command, the Autobots were granted asylum on Earth by the US government if they kept the Decepticons at bay. However, in "Darkness Rising", the Decepticons return, killing Cliffjumper and target Jack, Raf, and Miko, three children who were seen with Arcee and Bumblebee. Optimus requested they be brought to base and know the full story, much to Arcee and Ratchet's dismay. Megatron returned soon after, wielding Dark Energon and nearly killing Optimus and Ratchet with a horde of reanimated Cybertronian corpses. Optimus later fought Megatron on the latter's space bridge, which Megatron intended to use to bring forth an army of undead to conquer Earth. Though Optimus is nearly killed by Megatron, he is able to gain the upper hand, and leaves Megatron to his apparent destruction when the Autobots destroy the space bridge. However, Optimus later confided in Ratchet that he still mourns Megatron's death, as he had a small glimmer of hope he could be turned to good. However, he does not underestimate Megatron's successor, Starscream.


1 is the TF/ Evangelion crossover edition of MP 10 Optimus Prime. Honestly Im not familiar with Evangelion but OP in purple and green is just sick. 2 is the MP version of Sideswipe, but Takara calls him Lambor. 4 is the "marlboro edition" Diaclone repaint of MP Wheeljack. It was supposed to be released in March, but Phillip Morris blocked its sale in the U.S. bc they suck. Luckily my homeboy /u/dajoeker was able to help me get a hold of one.
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
While Beast Machines was still running in Canada, Japan's Takara made a bid to return to the familiar vehicle-transforming robots concept. In 2000, Car Robots was released. This line was brought by Hasbro to America as the Robots In Disguise series, and featured the Autobots facing off against the Predacons. This series is usually regarded by most as filler while Hasbro contemplated the next direction for Transformers. However most fans of Transformers recognise that most if not all of the toys released from this line were of excellent quality (with the Optimus Prime and Ultra Magnus figures gaining considerable praise), combining the ball-joint articulation with detailed, well painted alternate modes.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
The first Unicron Trilogy Optimus Prime toy transforms into a longnose truck cab of made-up model. His clear-plastic smokestacks can detach and form a double-barrelled pistol that he can hold in robot mode, and a button on top of his head causes his mouthplate to jiggle up and down as if he were talking (the irony being that while this was a familiar trait of G1 cartoon Optimus Prime, in the Armada animated series, this Prime's mouthplate remained static when he talked). He can also hold a large cannon that is stored within his trailer, and his chest flips down to reveal a (non-removable) Matrix of Leadership. He is packaged with his Mini-Con partner Sparkplug.
This figure was originally conceived by Hasbro to be another character (exactly who is unknown), rather than Optimus Prime, but Takara insisted that the toy be made into Optimus to help it sell well in their markets, as the vehicle mode was no particular draw, given its scarcity in Japan. Reportedly, the figure cost twice as much as other Alternators to construct, so Hasbro had to bow to this demand so Takara would help fund it. Ironically, Takara eventually wound up soliciting the figure not as Prime, but as his Super-God Masterforce lookalike, Ginrai (perhaps connected to the Powermasteresque headsculpt), before its Japanese release was cancelled and moved over into the Kiss Players toyline (see below).
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
In the movie, he starts out as a 1976 Camaro before modernizing himself. But the 2007 version (the fifth generation of the model) was a concept car-- you couldn’t even buy a new Camaro until 2009. They later switched to the production version for the 2009 sequel Revenge of the Fallen and he was yet another updated model for Dark of the Moon in 2011 (the SS model). In Age of Extinction, he appears both as a 1967 model and another new model of the current version. Finally, back in June, Bay tweeted that in next year’s The Last Knight, Bee would be a custom-built 2016 Camaro. Over the first two years of the relaunch, Chevy sold an astounding 140,000 Camaros and saw a 10% spike in the yellow model, thanks largely to our friend Bumblebee.

Marissa and Prime are now on the run from the EDC and are also frequently attacked by the mysterious "Legion" Transformers. When faced with such foes, Marissa unleashes her "Kiss Player" ability by kissing Prime, fusing with him once again, increasing his power so that he can best their opponents. Prime is armed with the Surf Blade, a weapon formed out of Marissa's surfboard, wielded expertly thanks to the knife skills Marissa passes on to him when they merge.[18]

This figure was released during the short-lived period when Hasbro was treating the Beast Wars as an extension of the Autobot/Decepticon war, and Optimus Primal was presented as being the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.


An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).
The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
This Walmart-exclusive redeco and retool of the 2010 Transformers toyline "Battle Blades" Optimus Prime toy features the Japanese release's hooks (instead of swords), plus an all-new mouthplate-less, mouthed face. As part of the set's lunar theme, reflections of stars are painted across his vehicle mode sides and on his windshield, with a sharp reflection of Earth's Moon in one of his windows. This time, his Matrix of Leadership is cast in orange plastic.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
Movie the Best Nemesis Prime is a redeco of the TakaraTomy exclusive Calibur Optimus Prime figure, with darker paint and plastic, and bright, metallic, purple eyes, and the mark of Quintessa on his face. As for the weapons, the Caliber Axe uses translucent purple plastic instead of orange, and there is more silver at the base of the blade. The Overshield has black replacing the original's silver and purple replacing the original's bronze.
A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.
Released in conjunction with Japanese cellphone maker au[10], au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
After the Great War, Optimus Prime disappeared with other legends into the mysterious location on Cybertron dubbed J'nwan, where Optimus himself became the "Authority" who spoke on behalf of the others. Sandstorm, the leader of a rebellion in a 32nd-century firmly under the heel of the tyrannical Shokaract, entered J'nwan to plead with the heroes of Cybertron's past for aid. He hoped to convince them to join the fight against the Predacon warlord. After a mind-crushing journey which left all of his companions dead or deranged, Sandstorm finally found an audience with the Authority and his brethren, but they declined to help, with the Authority stating that their time was past and the war was no longer their war. The Authority then in some way manipulated Sandstorm's trip out of J'nwan such that it was comparatively short and simple. Paradox

LEGO® sets are not cheap toys. They are made to the highest standards and have the price to go along with it.  However, in the past couple decades it seems that the price of LEGO sets has become outrageous. New sets can sell for up to $500 retail and old sets can sell for twice that in a secondary market. This is a children’s toy, right? There is no way LEGO sets have always been this expensive; it is just molded plastic. Let’s take a look at the history of LEGO pricing and try to figure out what is going on.

When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally


These include two large guns, patterned after the new weapons included with the G2 version of the classic Optimus Prime toy, which can be attached to the trailer in a similar fashion to those of Powermaster Prime. Also included are two additional (blue) Prime heads, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger's interpretation of Prime, especially as seen on the cover of the first issue, one pristine and the other battle-damaged.
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.
This sculpt was redecoed from the Generation 2 Gobot Firecracker. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic. It was redecoed again for the third wave of Go-Bots to become Sideswipe (who Prime really looks a lot like), and would later be used to created Robots in Disguise R.E.V..
He next appears in Transformers: Energon, the only time during the Unicorn Trilogy where Prime is not the main protagonist. In Energon, set ten years after Armada, he is no longer able to combine with his trailer. Instead, he has been gifted with the Spark of Combination by Primus, allowing him to combine with the quartet of vehicular drones in his trailer. Fire One, Copter Two, Digger Three, and Submarine Four, can each form either an arm or a leg when they combine with Prime, creating his super mode. Later, Prime gained the ability to combine with fellow Autobots Wing Saber and Omega Supreme, the latter case creating Optimus Supreme.
Tim Bailey, Sara Blackburn, Stephen Clark, Jeffrey Cohen, Adam Dimuzio, Mathias DeRider, Tom Fassbender, Luke Forney, Logan Giannini, Travis Hanson, Sean Hallenbeck, Michael Harrison, Kim Haynes, Whit Honea, Greg Howley, Michael J., Angela Leach, Michael LeSauvage, Jim MacQuarrie, Eric Parrish, Michael Pistiolas, Ricardo Rebelo, Drew Rich, Mitchell Roush, Mariana Ruiz, Tony Sims, Randy Slavey, Erik Stanfill, Andrew Terranova, Gerry Tolbert, Mark Vorenkamp, Chris Wickersham
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening
This exclusive redeco of Optimus Prime features darker shades of red and blue than his other releases and has extensive paint applications to resemble his on-screen appearances in The Last Knight, particularly his Nemesis Prime alter ego seen in the film. To that end, he features movie-accurate flame patterns, which are larger and more elaborate then the ones on the regular release or the SDCC exclusive, on his vehicle mode exterior and robot pectoral armor. His eyes and sword are also painted metallic purple, but his shield is completely unpainted for some reason.
Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…

The internet can be blamed for the size and scope of the secondary LEGO market. On the website, BrickLink, you can find almost any set that LEGO has ever produced. In addition, the site keeps records of trends in the market and value of individual pieces. This site is invaluable to a LEGO collector and has given many the ability to grow their collections. Before the advent of this site and sites like eBay, collecting LEGO required going to garage sales. There are now whole sites dedicated to buying LEGO as an investment, but that is a topic for another article.
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
Optimus Prime was one of three Transformers characters immortalized in Gummy Candy form by the Frankford Candy & Chocolate Company. Released during the time when Classics had just replaced Cybertron on the toy shelves, Prime's candy depicts him in his Cybertron body, alongside Generation 1 Bumblebee and a kooky Cybertron/Classics Megatron cross-breed. The candies were all sold individually in blister bubbles.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.

For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.


Voyager figures all feature a spring-loaded MechTech-style transforming weapon, partially constructed from translucent plastic, which lights up via LED when the weapon is deployed. The figures themselves also feature translucent plastic, so the moving LED creates the image of energon power "flowing" from the character's bodies into their weapons. This worked better in theory than in practice. Internally, these figures were referred to by Hasbro as "Powerizers".
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More
A giant-sized transforming Optimus Prime figure is set to be released for the third film. The set comes with a Leader Class-sized Optimus Prime figure and a trailer that transforms into his Omega Combat Armor - both of which combine to form Prime's Ultimate mode.[126] This set will be released on August 1st, 2011, a month after the film's premiere.
Part of the Legend Commander Collection sold at Transformers Expo, Convoy is a redeco of Robotmasters G1 Convoy. While most of the paint masks are identical to the original mold, other changes includes replacing the transparent parts into clear blue plastic, and the panel-lining on the grill is stripped off. Unlike the first toy, he does not include a pair of swappable 3mm fists, his missile launcher, or his Calamity Defenser weapon.
Excellent article. Especially for pointing out how different we remember things from ‘when we were kids.’ (I swear Optimus Prime was two feet tall!) My only criticism is linking to those two Brickset articles about supposed “quality decline”… the headlines are sensationalist and inflammatory, and a LEGO rep eventually replied to the spurious claims with information that deflates much of the (somewhat unfounded) criticism. Also the comments give me a headache. Otherwise great stuff!
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
×