A redeco of the Wing Convoy Super Real Figure, Wing Convoy Original Figure (ウイングコンボイ オリジナルフィギュア) was available at JUSCO department stores starting on July 30th 2004. The figure was available with purchase of a Wing Saber figure, and came in a plastic baggie, rather unattractively scotch-taped inside the toy's packaging. A sticker was placed on Wing Saber's packaging to note the promotion.
There is definitely a market for LEGO for adults. The modular buildings and other exclusives scratch that itch but there could be so much more. Currently the adult LEGO offerings falls into two categories: sets that look good but are boring to build (architecture) and sets that are fun to build (modular buildings, some Technic). The architecture line is marketed towards adult former fans of LEGO who want something to put on their desk. They can serve as a reintroduction to LEGO for adults.
Optimus Prime is then informed that Megatron has infected the core of Cybertron with dark energon and is given the task to undo the damage done. After rescuing Omega Supreme, Optimus, Ironhide, and Prowl fight their way to the core, but it's too late. The core informs Optimus that it is far too corrupted. It can repair itself by shuting down, but it will take millions of years. By that time, Cybertron will have to become cold, barren, and uninhabitable. The core gives Optimus a small piece of itself, saying it will still survive as long as the piece does. Optimus accepts the burden and the core relinquishes the Autobot Matrix of Leadership.
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth, picking up one year after the events that saw Optimus Prime's return to life.
Voyager figures all feature a spring-loaded MechTech-style transforming weapon, partially constructed from translucent plastic, which lights up via LED when the weapon is deployed. The figures themselves also feature translucent plastic, so the moving LED creates the image of energon power "flowing" from the character's bodies into their weapons. This worked better in theory than in practice. Internally, these figures were referred to by Hasbro as "Powerizers".
This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
A non-transforming model kit of Optimus Prime by Takara Tomy, sold exclusively in Japan. The kit comes with a pre-assembled inner frame that features a high rate of poseability similar to Master Grade Gundam model kits. The kit comes with two swords and two different sets of attachments for them: one set for the forearms and the other to replace the hands. Pre-ordered units of the first batch came with battle hooks.
Released as part of the Single Pack assortment, Optimus Prime is a show-accurate, non-transforming die-cast vehicle based on his alternate mode. He features through-axle construction, allowing for super-speedy racing on smooth surfaces, and his car mode is compatible with many tracks and playsets from Hot Wheels and Matchbox. He features 4 wheels, as opposed to the Legion Class' 6 wheels & his larger toy's 10 wheels. Optimus Prime also comes with a collector's flyer.
A retool of Lockdown with a new head. He is a simplified toy that can auto-transforms from an unlicensed approximation of a Lamborghini Aventador rather than a Lamborghini Centenario LP770-4 into a Voyager-sized robot by pulling out the arms first, and then flip the figure over itself. He features articulation on his arms, and features 5mm compatible hands.
This playset is a variation of Optimus Prime's dinosaur mode, but as a figure-8 racetrack. A launcher can propel Flip Racers through the track where they can activate a popup Chase and land in a jail. The Flip Racer MorBot is included but any Flip Racer is compatible. The raceway can be extended by attaching the Flip Racers launchers: Bumblebee’s Quick Launch Garage or Airport Blastoff Blades (sold separately).
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening
A redeco of the Generation 2 Go-Bot Firecracker, Go-Bots Optimus Prime transforms into a red Hot Wheels-sized Lamborghini Diablo. Like all Go-Bots, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly. He is armed with a small red laser rifle. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic.
Q-Transformers Optimus Prime is a tiny super deformed toy based on the Alternity Convoy design, transforming into a Nissan GT-R R35, though his legs retain the traditional blue truck bed motif. The English name on the packaging refers to him as just "Optimus". He comes with a code for unlocking "GTR Optimus Prime" as a playable character in the Q-Transformers: Mystery of Convoy Returns game. Standing at only slightly less than one inch and a half, this is actually the smallest transforming Optimus Prime ever made, which is a fairly impressive feat considering the surprising amount of detail in sculpt and paint apps.
This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
Released as part of the Bumblebee Energon Igniter's Speed Series line, this Optimus is a Legends/Legion-sized mold that transforms from robot into a Cab-over truck with the transformation scheme shared with the Transformers (2010) Reveal The Shield Legends Class toy, and he features 3mm compatible hands. Optimus' truck mode can also be attached with the Energon Igniters core, and due to the toy being lightweight, it can propel his vehicle mode forward very quickly, making him a fast-moving truck. Due to its simplified transformation, Optimus' robot shoulder parts ended up sticking out from his truck mode, and his upper cabin panel ends up being integrated with his head. Unlike most Speed Series toys, his Energon Igniter port is ends up under his right foot in robot mode rather than on his knee.
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
The 1986 line featured another significant change in that many, if not the majority, of the toys were conceived as futuristic vehicles and bore little resemblance to present-day machinery. This was due to changes in the movie and television series, which leaped ahead twenty years to the year 2005. Many have speculated that this change might have been what signaled the beginning of the end for the Transformers, as part of the novelty of the first lines was the realistic vehicles that turned into robots.
In Transformers: Decepticons, Optimus Prime lands on Earth along with the other Autobots to stop the Decepticons. Optimus does not appear until Megatron is released and Starscream escapes with the Allspark. Optimus fights Megatron, but is defeated and is killed while Megatron gives chase to his traitorous second-in-command. In the 2009 Revenge of the Fallen video game by Activision, Optimus Prime is among the playable characters.
Alternatively, if Optimus chose to retreat either when initially confronted with the overwhelming Decepticon threat, or after realizing that his troops are too weak to fight after ordering them to concentrate their firepower equally amongst the intruding Decepticons, the ensuing underground adventure can have multiple outcomes; the Autobots become the captive of the Insecticons, forcing Optimus to either entrust Beachcomber with the fate of his troops, or to bargain with the Insecticons for the safe release of his Autobots; or dealing with the theft of the Sun-Pak by either duelling Megatron for the device's ownership, stealing the Sun-Pak back from the Decepticons or charging Mirage and Buster with the device's retrieval. If Optimus duels Megatron for the device, he either wins through brute force or by being more "cunning" than Megatron and destroying the device before the Decepticons can claim it as their victory prize. If Optimus attempts to steal the Sun-Pak under the Decepticons' noses, Optimus is shot by Megatron when the Decepticon leader notices Optimus and Smokescreen skulking towards the Sun-Pak. The Autobots nonetheless retrieve it when Smokescreen blots out the sun with his emission fumes, forcing Megatron to pass the Sun-Pak towards Buzzsaw in order to bypass the Autobots' smog cover, only for Optimus to intercept Megatron's pass and drive away with the Sun-Pak in Autobot possession. Finally, if Optimus has entrusted the Sun-Pak's retrieval to Mirage and Buster, the Autobot leader makes the duo swear not to engage the enemy for fear of their safety. If his Autobots keep their promise to him, Optimus is called in alongside the rest of the Autobots when the Insecticons are discovered, and Optimus leads a successful ambush towards the Insecticons, at the cost of the Sun-Pak itself. Attack of the Insecticons
This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.
Categories: Character stubs missing fictionStubCharacter stubs missing video gamesAction MastersAlternity AutobotsArmada AutobotsAutobot leadersBeast Machines AutobotsBeast Wars AutobotsBeast Wars: Uprising AutobotsCloud AutobotsCombinersConvoysDimension hoppersDreamwave Generation 1 AutobotsEmperors of DestructionGeneration 1 AutobotsGeneration 2 AutobotsGeneration 2 Go-BotsGhostsGladiatorsGT charactersHall of Fame charactersHenkei! Henkei! AutobotsMatrix bearersMulti-component TransformersPowermastersPrimesRevenge of the Fallen AutobotsRulers of CybertronTransformers with three modesTransTech AutobotsUnited AutobotsZombies
When animating the scene in which Primal removes Prime's spark, Mainframe's animators consulted The Transformers: The Movie for reference on the interior of Prime's chest. Not realizing the importance of the Matrix of Leadership, they rendered it as a container for Prime's spark. Beast Wars writers Larry DiTillio and Bob Forward have since claimed that in their view, Prime had not received the Matrix from Alpha Trion at this point, but a later comic produced for Botcon indicated that the Matrix was in fact stored in a secondary compartment, hidden behind Prime's spark. In this particular comic, the alien Vok used the Matrix, the Transmetal Driver, and a control suit once piloted by the Predacon Quickstrike to create Primal Prime.
The Transformers Adventure Easy Dynamic Series release, titled "Big Optimus Prime", features extra paint details and has two additional Autobot symbols on his shoulders. He also includes a different scannable badge, which is compatible with TakaraTomy's Transformers Adventures app. Scanning this will unlock Big Optimus Prime in the collection list. Unlike the American release, Big Optimus Prime is packaged in a windowed box, instead of an an open package.
After returning with Ironhide's body, Hot Rod was shocked as Optimus Prime resigned his position as leader. When Optimus Prime left the Autobots and surrendered to humans, Hot Rod and few others decided to break from the main Autobot group and leave Earth. As he requested Omega Supreme's help, he met and stroke an alliance with a small group of Decepticons led by Swindle. They then began to build an interstellar vessel. Swindle informed Hot Rod that some of bots in the group have started calling Hot Rod, "Rodimus Prime". Ultra Magnus and his team arrived to arrest Rodimus, for committing treason for working with the enemy. Just then, Swindle walked over and said that he will take over now. Rodimus said that he had things under control, but Swindle dropped the charade and said he plans to take the ship off the planet, and kill as many Autobots as he can before that. Swindle gave the order for the Stunticons to merge into Menasor, his newest creation. After winning the battle against the Deceptions with help from Optimus and Spike's Skywatch soldier, Magnus found Rodimus and told him he was under arrest for willful collusion with the enemy. Rodimus attempted to justify his actions, but Silverstreak was fed up with him. Bumblebee interceded between Magnus and Rodimus, telling Magnus to back off. Magnus, not one to be ordered around, attempted to supplant Bumblebee's authority. Bumblebee snapped, and he told Magnus that they have felt lost and scared ever since Megatron stole the Matrix of Leadership. He also said that he was in charge until the Matrix is recovered and it chooses someone else. Hot Rod overheared this, as he snuck off and stole Ultra Magnus' shuttle, leaving Earth. He went to assault the Decepticon base on a satellite, taking the Matrix of Leadership back from Starscream, only to encounter a newly reformated Megatron, who blasted him in outer space, leaving him seemingly dead. Floating through space, Rodimus crash-lands on a desolate planet with the Matrix bonding onto his body which keeps him alive.
However, Prime was encouraged to keep fighting by the cheers of a human boy named Junpei. Megatron, surprised at Prime's resilience, attempted to finish his foe off with his Tornado Axe attack. Prime countered with his Double Wheel-Torque Mega-Ton, which trumped Megatron's attack and injured the Decepticon badly. Megatron teleported back to his ship and left Earth's atmosphere, vowing to return.
Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg onto his lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
As part of the Robot Replicas line, this version of Optimus is a non-transforming action figure that utilizes Revoltech-style jointing. The sculpt hews much closer to the movie CGI model than is possible with the full transforming toys, plus the universal jointing of the line allows for his forearm to be replaced with his hand-cannon... or bits from other Robot Replicas.
Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.
Commander class figures all come with translucent weaponry, and feature some amount of translucent plastic in their bodies (blue for Autobots, but a variety of colors for Decepticons), a feature designed around interacting with the line's vehicles (see below). Each vehicle is equipped with an "Energon Booster", a light-up accessory that can plug into the Commanders' weapons or into the posts and ports on the figures' backs to illuminate them with "glowing energon power".
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.