LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
The second known version  ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
I you can get an official reissue for around the same price, do it. I lucked out and got an opened but mint Encore for $50 last week but you'll be getting lucky that way. All Hasbro reissues have short smokestacks and long stacks are harder to get separate to swap out. Average price for a Japanese reissue is around $100 opened. If you are on a budget and the kid doens't care about slight issues, the $40 KO would be the better option.
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984 A.D., a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.
This Wal*Mart-exclusive two-pack pairs the deluxe-size Classics Optimus Prime figure with live-action movie line's Fast Action Battlers Power Hook Optimus Prime toy. Both toys are identical to their original releases, and together represent the Optimus Primes of the oldest and newest generations (at the time) of Transformers, respectively. The movie Prime is designated "2007 Optimus Prime", while the Classics figure is dubbed "1984 Optimus Prime" (referring not, of course, to the toy, which was produced in 2006, but to the character).
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More
A Toys R Us-exclusive item, this Titanium two-pack features the previously released War Within Optimus Prime and the upcoming War Within Megatron figures. Also included is an exclusive variant cover War Within comic book. Missing, however, is the unique base that comes with all single-pack 6-inch Titaniums (including the original release of War Within Optimus). The Megatron figure is also lacking its base, this despite bases for both figures being depicted on the instruction sheet.
In the 21st century reimagining of the original continuity by Dreamwave Productions, Optimus Prime started life as a data archivist known as Optronix, or Orion to his friends. After taking note of a battle where the Autobot leader Sentinel Prime had been killed by Megatron, he was summoned to the Council of Elders and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, and arranged for the Autobot evacuation of Cybertron. He intended to leave the Decepticons to their own devices, but a battle with Megatron beneath the planet's surface, accompanied by visions from the Matrix, stirred him on to fight for the safety of his homeworld.
2. Piece diversity: Today the total range of piece types and the number of new piece types introduced every year has skyrocketed since the decade of the 80s. As a kid, the new pieces introduced every year were indeed one of the great answers to my parents’ pleas of “don’t you already have ENOUGH Legos?!?!” However, the quantity of new piece types again coupled with the broad color diversity again requires much more Lego to be purchased to attain that “critical mass”.
My 6 year old son has recently gotten into the classic transformers. He has asked for an original Optimus Prime for Christmas. I can’t bring myself to spend the money on an original 1984 model, but would like to know if the reissues from China (sample in the link) are quality products. I’m not looking for a masterpiece, but i don’t want something that will fall apart within a month or so. Thanks in advance for the helpOptimus Prime
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
Optimus Prime led the Autobots to stop Megatron's attempt to cyberform Earth. After discovering that Megatron's new weapon was the Proudstar, Optimus initially tried to preserve the Cybertronian history contained on its Ferrotaxis supercomputer. Inside the Proudstar, he received a prophecy of his future death from Teletraan Alpha, but he merely expressed happiness that his friends would survive. After the Plasma Core was damaged and proved to be too great a threat to Earth, Optimus reluctantly decided to destroy it and the Ferrotaxis in order to preserve humanity's right to forge their own future. When Megatron shot shot the Ferrotaxis into space in one last spiteful effort to stop the Autobots, Prime rode an Insecticon swarm into Earth's orbit for a final showdown with Megatron, ultimately forced to destroy the Ferrotaxis. Once Megatron was again defeated, Optimus called upon the Autobots to stop merely living upon Earth and adopt the planet as their new home. Later, he and Wheeljack discussed plans for the Optimus Maximus project. Transformers: Devastation
In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
Equipped with knowledge of the future and the danger that would soon be threatening the transformers, Ravage's machinations included trapping Megatron and a large army of Decepticons in a spacial rift with the intention of protecting the Decepticons from the approaching Unicron and forcing the Autobots to face the planet-eater unaided. The Decepticons would then be in a position to conquer the victor of that battle.
"Convoy Last Production" was the final re-use of the Masterpiece toy mold before it was at last retired after numerous re-releases and redecos. The figure is essentially identical to the original Japanese MP-1 release, aside from a slightly brighter red, and the addition of the words "LAST SHOT" in Transformers typeface molded into the small of Convoy's back, hidden beneath its headlight-flaps in robot mode. Lacking the trailer of MP-4, the figure instead comes with a redecoed version of the electronic base included with Hasbro's "DVD Edition" of the figure from five years prior, which now features a collection of sixteen soundbytes of Convoy delivering famous lines from the Japanese version of the Generation 1 cartoon, recited by the character's original Japanese voice actor Tesshō Genda. The base was promoted as containing a hint as to the identity of the next Masterpiece toy; as it would turn out, this was a new version of Convoy himself (see below), foreshadowed by a sound clip on the base which played only intermittently, and which had Convoy announce that he would "soon be reborn".
There are two versions of the voice changer helmet with two different pre-recorded voices. An earlier release features a voice similar to Garry Chalk, while the later release features the voice of Peter Cullen. The latter version has modified packaging under the 'Try Me!' blurb, stating it has 'Real Movie Voice!', though the updated version has also appeared in the original packaging without the 'Real Movie Voice!' notice.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.
Beast Wars: Transformers had to be renamed in some countries, particularly Canada, because of concern over the word "war" in the title. So, in some countries, it was released under the title Beasties. Long-time Transformers fans noticed the prominence of the words "Beast Wars" over "Transformers", the latter appearing in small type under the former. The Transformers' fan base splintered into two groups as a direct result, with the one enjoying Beast Wars for what it was and the other refusing to accept it as official canon in the Transformers mythology.
This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.
Inspired by a 1985 special limited release of Optimus Prime with bonus Pepsi decals for his trailer in the US market, Pepsi Optimus Prime sports an egregious number of new new Pepsi-themed paint masks and decals, as well as an entirely new trailer unit, specially designed to carry a single 500ml-size bottle (a common size in Japan), three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan).
The lowest priced toys in the Armada line were three-packs of Mini-Cons. Each larger price point consisted of an Autobot or Decepticon who came with a Mini-Con partner. Mini-Cons could be used to unlock a variety of features on each larger robot, such as firing weapons, electronic lights and sounds, or alternate modes. Some three-pack Mini-Cons combined into other forms or had additional features. According to the storyline, Mini-Cons also enhanced the power of other Transformers, giving incentive to collect as many of them as possible.