Though he was packaged on an individual box, he was initially sold as part of a set with Dark Energon Megatron. He was eventually made available on his own, and all of the Dark Energon Series toys were eventually made available in Singapore as mass-retail releases. The Voyager Class toys, in particular, also saw mass-retail release in the Philippines.

Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.


Alternatively, if Optimus chose to retreat either when initially confronted with the overwhelming Decepticon threat, or after realizing that his troops are too weak to fight after ordering them to concentrate their firepower equally amongst the intruding Decepticons, the ensuing underground adventure can have multiple outcomes; the Autobots become the captive of the Insecticons, forcing Optimus to either entrust Beachcomber with the fate of his troops, or to bargain with the Insecticons for the safe release of his Autobots; or dealing with the theft of the Sun-Pak by either duelling Megatron for the device's ownership, stealing the Sun-Pak back from the Decepticons or charging Mirage and Buster with the device's retrieval. If Optimus duels Megatron for the device, he either wins through brute force or by being more "cunning" than Megatron and destroying the device before the Decepticons can claim it as their victory prize. If Optimus attempts to steal the Sun-Pak under the Decepticons' noses, Optimus is shot by Megatron when the Decepticon leader notices Optimus and Smokescreen skulking towards the Sun-Pak. The Autobots nonetheless retrieve it when Smokescreen blots out the sun with his emission fumes, forcing Megatron to pass the Sun-Pak towards Buzzsaw in order to bypass the Autobots' smog cover, only for Optimus to intercept Megatron's pass and drive away with the Sun-Pak in Autobot possession. Finally, if Optimus has entrusted the Sun-Pak's retrieval to Mirage and Buster, the Autobot leader makes the duo swear not to engage the enemy for fear of their safety. If his Autobots keep their promise to him, Optimus is called in alongside the rest of the Autobots when the Insecticons are discovered, and Optimus leads a successful ambush towards the Insecticons, at the cost of the Sun-Pak itself. Attack of the Insecticons
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.

Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one of a kind (well, two of a kind) piece is a almost fully vacuum-metallized Leader class Optimus Prime in red, silver and blue (based heavily upon Generation One Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.

A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
This gold-chrome and clear-plastic redeco of the Leader-class Optimus Prime figure was first offered as a prize in a mail-in contest held through TV Magazine alongside a silver chrome version of the same toy (see below). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (again, see below).

After weeks of Decepticon silence, Optimus Prime decided to get proactive and sent out patrols all over the planet to try and flush the villains out. None of the patrols reported back with any success, however, and Prime realized that there was one area of the planet that his troops had deliberately ignored: the mysterious "Nebulos Triangle". Quickswitch, Scoop and Quickmix were sent into the Triangle, and they did indeed discover and foil the Decepticon plot going on in the area. Decepticons Underground


Alternity Convoy transforms into a 1:32 scale Nissan GT-R, featuring die-cast metal parts, an opening hood, trunk and doors, as well as an interior, complete with his feet and thighs being sculpted to form the back seats. This complex figure stands at 6.5" tall, and is armed with a pair of blasters on each arm. In the hyper-dimensional world of the oft-confusing Alternity fiction, this figure specifically represents the Optimus Prime of universal stream Primax 903.0 Beta.
At BotCon 2005, Hideaki Yoke revealed that Optimus Prime (or more accurately, Diaclone Battle Convoy) was not designed by a single person, but rather a team of Takara designers as the one who was originally assigned the job had fallen behind. It is said that a young Shoji Kawamori was also a member of this team at some point, who would design THS-02 Convoy over 20 years later. The patent for the toy, however, lists Hiroyuki Obara as the designer.
1 is the TF/ Evangelion crossover edition of MP 10 Optimus Prime. Honestly Im not familiar with Evangelion but OP in purple and green is just sick. 2 is the MP version of Sideswipe, but Takara calls him Lambor. 4 is the "marlboro edition" Diaclone repaint of MP Wheeljack. It was supposed to be released in March, but Phillip Morris blocked its sale in the U.S. bc they suck. Luckily my homeboy /u/dajoeker was able to help me get a hold of one.
Nearly all the chrome is worn off, the tips of both smokestacks are broken, the fists and guns and voice box are long gone, there's a huge chip of plastic broken off one of the shoulders. I still have the trailer, but it's also broken in a few places. The door is gone. The spring-loaded gimmick doesn't work anymore. The repair drone broke off entirely near one of the joints on the main arm and was thrown away many years ago.
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
There is another factor that comes with the sticker shock. As I showed before, LEGO has had $100+ sets for a while. However, only recently have they produced sets even more pricy than that. When we were kids, the $100 set was the pinnacle of LEGO. It was the set we all aspired to own. It was the set we all went straight to at the store. Of course we rarely ended up with that set, but that was our dream.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.

The character of Optimus Prime first appears in the 2007 Transformers film as the leader of the Autobots in the search for the Allspark. He intends to destroy it, even if it means sacrificing himself, before the Decepticons can use it to create a new army to conquer the universe. After arriving and scanning a Peterbilt truck, Optimus greets Sam Witwicky and Mikaela Banes, introducing his men and explaining why they have come to Earth. During the final battle, Optimus slays the hate-filled Decepticon Bonecrusher and faces his ancient enemy, Megatron. Unable to match Megatron in combat, Optimus urges Sam to push the Allspark into his chest, which will destroy them both. Instead, Sam rams the Allspark into Megatron's chest, destroying it and killing the Decepticon leader. The film ends with Optimus sending out a deep-space signal, inviting other Autobots to join them on Earth.


Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.

The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
Kabaya's second candy toy of Energon Optimus Prime was released as part of the Hyper Transformers series. This non-transforming figurine depicts Prime in his lesser-seen combined mode with Wing Saber: "Fight Mode", as Hasbro called it, or "Cannon Mode" in Japan. The figure's shoulder cannons came on a separate sprue in-package and had to be removed by the buyer. Prime's head can be removed and attached to the Hyper Transformers Omega Supreme figure, creating Optimus Supreme. As a candy toy, Prime came with a stick of gum.
A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.

Part of the third wave of 2012-onwards Generations Legends Class toys, Thrilling 30 Optimus Prime is a new mold that is roughly the same size as a Cyberverse Commander Class toy. Both his truck and robot mode are based on his Don Figueroa-designed body from IDW's ongoing series, and features 5mm-compatible hands and roof. He comes with an Ion Blaster which has both 5mm and 3mm posts.
IDW's Transformers Collectors Club exclusive comic story, Revelations part 6, is set after the defeat of Galvatron, but before Optimus Prime's mission to start a new Space Bridge project. In this story, the Autobots from the IDW series Robots in Disguise, Optimus Prime, Ultra Magnus, Sentinel Maximus, Downshift, Perceptor, Alpha Trion, Over-Run, Anti-Blaze, Checkpoint, and Scythe, meet the Autobots from the animated series, Cybertron Optimus Prime, Jetfire, Override, Scattorshot, Red Alert, Hot Shot, Lori, Bud, and Coby Hansen, and thank each other and remembering those who were lost in the battles.[40]
Transported to a parallel Universe, as the walls of reality began to crumble, foretelling the coming of Unicron to the Armada universe, Optimus Prime and Jetfire were reformatted by their Mini-Con companions using the Mini-Con Matrix into new "Powerlinx" forms. Optimus Prime and Jetfire combined to hold the chaos-bringer at bay. Unicron was eventually defeated by the united power of the Mini-Cons.
Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.
Alternatively, the Autobots could concoct a plan where Optimus would pretend to allow himself to be taken prisoner, per Buddy’s suggestion. The Decepticons, fooled into thinking they’ve won, took Optimus Prime into their base. Having hidden his troops inside his trailer, Optimus and the Autobots then led a surprise attack on their unsuspecting foes.

In the wake of this incident, the transformers managed to reclaim much of Cybertron. Mindful of the dangers of allowing humans like Cobra access Cybertronian technology, Prime sent Perceptor, Grimlock, Arcee, and Bumblebee on a mission to Earth. As it turned out, Prime's fears were well founded. The U.S. government had used parts from Megatron to create Serpent O.R., a cyborg designed to be a perfect weapon. A raid by Cobra allowed it to escape and gather an army of Decepticons on Cybertron, killing Bumblebee in the process. Despite the grief of losing Bumblebee, Prime continued on and rallied his comrades to do the same. Attacking the Autobot capital city, Serpentor's forces proved overwhelming, and Prime surrendered to ensure the Decepticons would cease fire and not kill another comrade. Realizing that Serpentor wanted the Autobot Matrix of Leadership, Prime broke free as Serpentor was distracted, but was unable to kill him. He was promptly attacked and nearly beaten to death by Razorclaw and Motormaster. He was subsequently forced to watch as Serpentor opened the Matrix. In doing so, Serpentor was not only reformatted into a transformer-like mechanoid, but was also shown the futility of the fighting by the Matrix. At this point, Cobra Commander was able to take control of Serpentor's body. In an attempt to stop him, Hawk opened the Matrix and was transformed into a great leader, rendering Cobra Commander comatose. As the Joes prepared to head home, Prime promised to record the Hawk-led humans' future.

Part of the sixth wave of the 2010 Transformers toyline, this Optimus Prime is an all-new Deluxe class mold based on the original Generation 2 Laser Optimus Prime toy (see above). Transforming into a racing truck, he has some influences from the live-action movie Optimus Prime, including the more defined flames on his hood, athletic robot mode proportions and a more aggressive-looking translucent orange sword that can be held with both hands for maximum extreme chopitude. Optimus Prime features extensive use of translucent plastic in his arms, head and upper torso for a light-piping effect. Optimus also has a (non-detachable) matrix gimmick in robot mode that is formed by a relief pattern on the inside of the cab's side windows and is visible through the windshield/chest in robot mode. Like the Legends toy, he's part of "Reveal the Shield" and features a rubsign, this time on the roof. He is also very articulated and poseable, even featuring ankles and wrists that are both ball-jointed and hinged.


Within G.I. Joe's headquarters, Optimus found Doctor Venom controlling a robotic suit made out of the remains of both Bumblebee and Soundwave. The battle between him and the Joes spilled out into the open and into another battle, where Decepticobra was attacking the United Nations. As more factions joined the brawl, Optimus yanked Bumblebee's components free from Soundwave's body and took to the skies, back to Cybertron. Expelled from the Garden There, he was able to reunite Bumblebee's body with his head. Headmasters
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.
LEGO® sets are not cheap toys. They are made to the highest standards and have the price to go along with it.  However, in the past couple decades it seems that the price of LEGO sets has become outrageous. New sets can sell for up to $500 retail and old sets can sell for twice that in a secondary market. This is a children’s toy, right? There is no way LEGO sets have always been this expensive; it is just molded plastic. Let’s take a look at the history of LEGO pricing and try to figure out what is going on.
Optimus and Bumblebee snuck into the Decepticons' base, and found their enemies upgrading themselves with Autobot parts. The pair took offense to this, and Bumblebee set about sabotaging the process. Megatron wound up tripping on some gumballs thanks to the Autobot's mucking about, and Optimus congratulated his fellow Autobot on a prank well done! Intro!
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
A Japanese-exclusive, the final new-design G1 Convoy toy was a departure from previous versions. He now transformed into a small extended hood cab truck of made-up model pulling an implausibly large trailer equipped with motorized caterpillar treads. The trailer could additionally pull along the auxiliary trailer transformer Grandus, on which the shuttle Sky Garry could land, forming the spaceship "Battlestars". Even without combining, Star Convoy's truck mode was a behemoth, including a Micro Trailer semi as a small accessory and an upgraded Roller that was now patterned after a tracked ballistic missile carrier.
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.

Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.

This figure was released during the short-lived period when Hasbro was treating the Beast Wars as an extension of the Autobot/Decepticon war, and Optimus Primal was presented as being the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.


Tomica Optimus Prime is a die-cast non-transforming toy of his truck mode from Prime. It was sold as part of the "Dream Tomica Series", a subline featuring exclusively fictional vehicles. Like all Tomica toys & all Generation 2 GoBots and Spychangers, Optimus Prime features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces. However, they do not convert into robot mode.
The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".
This Turbo Change Series Optimus Prime toy is a slight redeco/retool of the Lost Age Series toy. Deco changes include omitting the flame tampos on his legs and shoulder, and added blue pinstripes on the Trailer/Wing Backpack to evoke his Generation 1 toy's trailer. This toy also features some new parts like the screen-accurate forearms, the command deck for the smaller Turbo Change Series toys, and the trailer's adapter. His usual Sword of Judgment is now replaced with a screen-accurate mold that is similar to the Armor Knight toy's sword, and he now features a new Vector Shield piece, which can convert into a battle axe.

There is also the release of Optimus Prime as a deluxe sized brown gorilla which is a repaint of the Beast Wars 10th anniversary Optimus Primal toy most likely trying to tie Optimus Prime in some way to the jungle planet Animatros in the Cybertron series. According to his bio, Optimus Prime was temporarily mutated into this form by the Animatros Cyber Planet Key. The colors of this toy are a homage to Transformers: Universe Optimus Primal.


The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.
Like Chomp & Stomp Grimlock, his truck kibble from the back can accommodate One-Steps and Power Battlers (Both Hasbro and TakaraTomy), activating his various voice clips and flashing lights by interacting with the magnets in their feet. He is notably less kibbly than other AOE Optimus Primes...from the front, at least. The back and sides are not so promising with large chunks of Western Star truck kibble hanging off his legs, making him look as if he's wearing a petticoat. At least the jetpack helps balance the whole thing out....

These include two large guns, patterned after the new weapons included with the G2 version of the classic Optimus Prime toy, which can be attached to the trailer in a similar fashion to those of Powermaster Prime. Also included are two additional (blue) Prime heads, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger's interpretation of Prime, especially as seen on the cover of the first issue, one pristine and the other battle-damaged.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.

In Transformers: Armada, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.

Prime would make one further surprise appearance in Dreamwave's Transformers: Armada series. With Optimus Prime having disappeared to an alternate dimension, devastated by Unicron, the Autobots attempted to find their leader. As Jetfire attempted to locate him through Spacebridge links to other dimensions, one of these clearly shows RiD Optimus Prime and Prowl.
Rounding out a bumper year of Japanese-exclusive Generation 1 Optimus Primes, the Takara-licensed Kawada brand Diablock Convoy is a fully transformable Lego-style block building figure similar in premise to the earlier American Built to Rule sets. The Diablock figure, however, easily outstrips the Built to Rule sets by both being an accurate representation of the toy on which it is based, and being able to transform between modes without having to be partially disassembled and put back together first.
The Beast Wars raged on prehistoric Earth, eventually leading to the discovery of the buried Ark sometime after its crash on prehistoric Earth. Megatron, following his namesake's instructions in a desperate gambit, decided to attempt to change history by killing Prime, who was still lying in the Ark in stasis lock. Megatron hoped that this would result in the Decepticons winning the Great War and eventually Predacon control of Cybertron. Megatron unleashed a full-power weapon blast at Optimus Prime's face, near-fatally injuring him. The Agenda (Part III) However, Optimus Primal proceeded to take Prime's spark into his body to protect it from surgical trauma while his injuries were repaired. The subsequent power increase caused by Prime's spark's connection to the Matrix mutated Primal into a large, Transmetal "Optimal Optimus" form. Then, with the repairs complete, Prime's spark was restored, and he briefly activated before sinking back into normal stasis. Optimal Situation
Doug Smidebush, Lior Keinan , Kelvin Nduka, Thad Standley, Nolan Zak, Adam Franks, Stephen Brown, Loren Roberts, Matt and Nykki Boersma, Tom Morgan, Jack Everitt, John Kovalic, Seiler Hagan, Jess Hart, Will James, Christopher M. Kelly, Roberto L. Vargas, Michele Hall, Chuck Lawton, Ismael Schonhorst, (There are those who call him) Tim, Vladimir Weinstein, Randiman Rogers, Robert Booth, Henry Roenke, Kevin Culp, W. David MacKenzie, Nicholas Richards, John Idlor, Michael Fox, Rob H., Matthew Cody, Dan Callahan, Patrick Kohn, Seth Phillips, Kevin Korpi, Ben MS, Monica, Mark Gonyea, Pharlain Ross, Derick Larson, Furstarter.com
In a break from tradition, Energon Optimus Prime's large mode resembled a configuration similar to Voltron or to the Super Sentai action figures. This design was unpopular with many fans due to design issues with the toy. The small robot's body was large in proportion to his arms and legs which made the figure appear fat, earning it the nickname "Fatimus Prime" or "Obese-imus Prime". The 4 vehicles that combined with the robot were small, lacking the intricate detail that made other toys in the line popular. Fans were also angered by early releases of this toy in which the head was molded with a mouth rather than the traditional face plate design. Later releases of the toy eliminated the visible mouth feature.
The Optimus Prime Battle Rig Blaster transforms from a superdeformed amalgamation of his Movie truck and G1 Optimus Prime's truck (indeed pulling G1 Prime's trailer) to a fully G1 robotic forearm and hand with a built in Nerf style gun. By simply placing your hand inside the back of the trailer (I need an adult!) and pulling back on the front of the truck, the gun transforms and folds back into a weapon. It comes with three Nerf N-Strike size whistle darts which can be stored inside the trailer. Although not shown in the image, the truck front splits in half in gun-mode, while the grille acts as a sight. This toy was marketed as 'Optimus Prime Big Rig Blaster' overseas.
In the episode "Along Came a Spider", Optimus discoveres that Elita did survive the ordeal with the giant spiders and was transformed into the technorganic Decepticon Blackarachnia. He offeres to try and help her, but is turned down violently as Blackarachnia has still not forgiven him. However, when she nearly dies trying to use the Allspark key to purge her organic half, Optimus saves her and repeats his offer to help her. She stings him instead, vowing that she will never trust him.
Optimus Prime led a group of Autobots who left Cybertron aboard the Ark, which was shot down over Earth, sending them into stasis for four million years. Optimus was badly damaged in the crash, and the prognosis wasn't great, but he recovered in time to announce the Autobots had no choice but to involve the humans in their war. Following a battle at Dyson Dam, Prime persuaded Jetfire to join the Autobot team. When the Decepticons headed through the space bridge to Cybertron, Optimus followed, only for him and his team to be ambushed and imprisoned.
In our list of things you didn’t know about Optimus Prime, we learned that the live action version of Optimus was based on actor Liam Neeson. It turns out Michael Bay likes to base his Transformers on real actors, because it’s been revealed that Bumblebee’s character movements are based on Michael J. Fox-- but not just regular old Michael J. Fox; we’re specifically talking about Marty McFly in the Back to the Future movies.

Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.
A Walmart exclusive set featuring a redeco of the first Cyberverse Commander Optimus Prime figure, featuring moderately brighter colors and paint, while his jetpack and rifles are now black, with the jetpack's wings having silver flames. He also lacks the flame pattern on top of his hood, and features different flame patterns on the sides of the hood.
In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.
EZ Collection Gum Convoy is another redeco of Generations Legends Class Motorbreath, featuring the retooled parts, but this time omitting the sword. He is decoed once again in his Generation 2 colors (see above), with the black legs, but uses metallic red plastic, and is coated in metallic red, blue, and black paint. As per the toyline's name, he comes with a yellow candy-shelled piece of lemony-flavored gum.
A Japanese-exclusive, the final new-design G1 Convoy toy was a departure from previous versions. He now transformed into a small extended hood cab truck of made-up model pulling an implausibly large trailer equipped with motorized caterpillar treads. The trailer could additionally pull along the auxiliary trailer transformer Grandus, on which the shuttle Sky Garry could land, forming the spaceship "Battlestars". Even without combining, Star Convoy's truck mode was a behemoth, including a Micro Trailer semi as a small accessory and an upgraded Roller that was now patterned after a tracked ballistic missile carrier.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More

The toy itself is a mix of different versions. The cab has the safety modifications, including the shortened smokestacks and longer missiles (and thicker rifle), but also has the modified hitch of the 2011 Chronicle DOTM two pack. Meanwhile, the trailer is the lighter grey version from the 2008 Universe release. This version also seems to suffer from mold deterioration.
×