The subject of Bumblebee’s voice is a bit of a complicated matter. Just as he was the second Transformer ever seen on the original TV show, he was also the second to speak and did so in the loud and clear voice of Dan Gilvezan, who voiced him throughout the original series and animated movie. But by the time we get to the first live-action movie, he could only talk via audio clips because, according to a prequel comic, Megatron had destroyed his voice capacitor during a battle on Cybertron.
In Another Light, Rodimus finally assumes total control over the Autobots upon Optimus Prime and several of his closest loyalists being jettisoned into space and left near death following the Battle of Decepticon City. However, his reign came to a swift end when the group returned, having been reformatted into the Knights of Unicron. The heroically reborn Optimus, now known as Nova Prime, engaged his usurper in battle and defeated Rodimus, sending him plummeting into Cybertron's depths. However, Rodimus then encountered the malevolent Primus, who enlisted his aid and that of other "true Autobots" in ridding his surface of those he considered vermin-namely, all Decepticons and Autobots not loyal to the same cause. This would lead to an epic battle between Primus' minions and the heroic Transformers of their universe: Galvatron's Decepticons, Nova Prime's Autobots, and a group of Maximals created from Classics Autobots.
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge
Eleven years after their arrival on Earth, Prime and the Autobots made a new human ally in Wataru Hoshinoumi when he stumbled into the midst of a battle between Prime's team and Starscream and Ramjet. Enter! The Transformers When Megatron joined the fight soon after, he held Bumblebee and Wataru hostage, daring Prime to make a move against him. Prime opened fire, but Megatron merely used the defeated Starscream for a shield, then turned his cannon on the younger duo. Prime unleashed his ion blaster and apparently deflected the blast with a shot of his own, saving Bumblebee and Wataru and prompting the Decepticons to retreat. The Emperor of Destruction Appears!

A non-transforming model kit of Optimus Prime by Takara Tomy, sold exclusively in Japan. The kit comes with a pre-assembled inner frame that features a high rate of poseability similar to Master Grade Gundam model kits. The kit comes with two swords and two different sets of attachments for them: one set for the forearms and the other to replace the hands. Pre-ordered units of the first batch came with battle hooks.[138]
The final waves of this line, released in early 2014, really pushed towards younger kids, with incredibly simplified designs based on the characters' Cyberverse releases, which actually allowed the toys to be larger than most others in their size class. Unfortunately, as they were tail-enders, their US releases were nearly nonexistant: only the Voyagers made it out at US retail, and only through discount chains like Ross and TJ Maxx. The rest ended up released only overseas (not even Canada got them!).
This Collector's Edition Japanese e-HOBBY exclusive was a redeco of Targetmaster Kup, released in conjunction with the 2006 reissue of Kup and designed to represent the character Orion Pax from the Generation 1 television series episode "War Dawn". Orion transforms into a Cybertronic pickup truck and came with both a gun and Barrelroller, a redeco of Recoil. He has full shoulder rotation, though the way his elbows are set up means he cannot make full use of their joints. His legs feature no articulation whatsoever.

The actual events of the Autobots and Decepticon coming to Earth were never printed by Dreamwave comics, but flashbacks of the events are printed later. These flashbacks suggest that the Autobots allied with humankind and defeated the Decepticons at the turn of the century. They planned to return to Cybertron aboard the newly constructed Ark II, but the ship was destroyed as part of a military conspiracy to take control of the transformers. A terrorist organization, run by the enigmatic Lazarus, was able to seize control of several of the Transformers that fell back to Earth while the U.S. military was occupied with locating Prime's body. Before his departure, Prime had entrusted a small portion of the Matrix to Spike Witwicky, who was forced by the product chief, General Hallo, to use it to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades, and then faced off against Megatron in San Francisco.
In the alternate universe of the 2003–2004 toyline and series, Transformers: Energon, Rodimus (lacking the "Prime" suffix in English, but still called Rodimus Convoy in Japan) was a great leader on Cybertron ages in the past and was viewed as a hero by many, including similar character Hot Shot. Desiring to escape the war that had consumed the planet, Rodimus departed Cybertron with a contingent of like-minded troops, most of whom settled on an alien planetoid and became the energon-mining Omnicons. Still, Rodimus continued on his journey with Prowl and Landmine, carrying the "flag of peace" from world to world.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.

The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
This Optimus Prime is a redeco of the figure above, featuring red wheels and various Tech Spec-sque patterns on the legs & chest which can be decoded with their transparent red weapons, which is molded in a sprue similar to the ones used for the Arms Microns kits & Robots in Disguise (2015) Mini-Con figures. He can use any weapons included in this set, although his primary weapon is an axe.
Generation 1 Optimus Prime has appeared in numerous video games since the introduction of the Transformers series. He makes a cameo in the 1999 Beast Wars Transmetals video game for Nintendo 64, where he is killed by Megatron at the end of the campaign, showing what would have happened in the Beast Wars series with a Predacon victory. Prime is also one of the playable characters in the 2003 Japan-only Transformers game for the PlayStation 2 and the 2010 Transformers: War for Cybertron. Optimus Prime is also playable in the Hasbro Net Jet Transformers fighting game Transformers Battle Universe. Three versions of Optimus Prime are playable characters, including the first generation incarnation, his incarnations from the 2007 live-action film, and the incarnation from Transformers Animated. In this game, Optimus Primal is also a playable character. He is a regular character in the Nintendo GameCube and PlayStation 2 2003 fighting game DreamMix TV World Fighters. He appeared as a boss in a simple Flash-based video game on the Hasbro web site.[17]
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
Of course, while Bumblebee does a lot of serious action in the films, tumbling and punching and kicking, you don’t see McFly doing a whole lot of that in the Back to the Future films. In fact, McFly doesn’t get up to too much more hard-core physical action, aside from some skateboarding and wailing on the guitar. Nevertheless, Fox does have a distinctly bowlegged gait, and you can see some of that in Bumblebee, and you can maybe see some Fox mannerisms in his more casual interactions with Sam Witwicky.
Part of the first wave of the "Mini-Con Weaponizers" subline imprint, this One-Step Changer figure of Optimus Prime is a new sculpt. In the Robots in Disguise mobile game, it was identified alternatively as an "Advanced One-Step" or "Evolved One-Step" figure depending on the user's region, but on the toy's packaging, no such modifiers are featured, and it is available as part of the regular One-Step Changer assortment. This figure shares most of its engineering with One-Step Fracture.
Hasbro's Toys R Us-exclusive 2003 reissue of Powermaster Optimus Prime was actually a modified version of Takara's then-recently reissued God Ginrai set. As such, the cab was partly constructed out of die-cast metal, vacuum-metalized plastic and had clear blue windows. The trailer was retooled so the super robot's fists could slide in and out of the arms. This set also included the originally Japanese-exclusive Apex Bomber drone trailer that attached onto the back of Optimus Prime's trailer in vehicle mode, and could become extra armour in super robot mode.The missiles where unchromed and lengthened due to safety issues as opposed to the Japanese release which were chromed and shorter.
This release of the Japanese Super Ginrai version of the of Powermaster Optimus Prime was a Toys R Us Japan exclusive black repaint, made to represent the original Convoy/Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' colour schemes.
Adventure Lucky Draw Optimus Prime is a gold vacuum metalized redeco of the original Warrior Class figure (save for some of his unpaintable thighs & upper shoulders) released as a prize for the Transformers Adventure prize draw campaign held between 25 July 2015 and 30 September 2015. To obtain it, entrants needed to send in four robot points clipped from the packaging of Transformers Adventure products.
Partially constructed of die-cast metal, this small three inch figurine of Optimus Prime has a CGI-accurate sculpt compared to the larger toys, owing to the fact it does not need to transform at all. He is sculpted with his Ion Blaster in his right fist, and is articulated at the neck, shoulders and waist. He comes with a small movie-style Autobot sigil display stand.
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
Optimus Prime (Clear Ver.) is a redeco of Revenge of the Fallen Legends Class Optimus Prime in black and clear blue plastic, available only in the August 2014 issue of TV-Kun magazine. His only paint operations are on his abdomen and face, but stickers for additional detail are included on the issue's sticker sheet. Optimus Prime has been slightly retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.
Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
×