Released as part of a collaboration between Transformers and Primitive Skateboarding, this figure is a black repaint of the Titans Return Powermaster Optimus Prime, with the deco somewhat resembling Nucleon Quest Super Convoy, but with some gold trims and Primitive Skateboarding markings partially designed by Primitive Skateboard founder Paul Rodriguez. He also comes with an extra ramp and skateboard accessory that resembles the one Daniel Witwicky used in The Transformers: The Movie, which Shreddicus Maximus (or any other Titan Master) can attach to. The ramp can also form Optimus Prime's gun.
LEGO® sets are not cheap toys. They are made to the highest standards and have the price to go along with it.  However, in the past couple decades it seems that the price of LEGO sets has become outrageous. New sets can sell for up to $500 retail and old sets can sell for twice that in a secondary market. This is a children’s toy, right? There is no way LEGO sets have always been this expensive; it is just molded plastic. Let’s take a look at the history of LEGO pricing and try to figure out what is going on.
Dark of the Moon Voyager Class Optimus Prime is an all-new mold. He features heatshield details in his sculpting and translucent solar panels on various parts of his body, and huge gas tanks. Optimus himself is differently proportioned, having larger feet and a smaller torso and arms. He also features some faux-kibble/parts: His actual windshield chest is being covered by a sculpted panel featuring his characteristic deformed windshield-chest, and a pair of sculpted tires on his thighs. His pair of optics is designed to have a light-piping gimmick, but it was rendered useless since it was painted in smoke gray on top of the colorless transparent plastic.
If Optimus destroyed the duplicate Cosmos, the real one would inform the Autobots of the Decepticons’ schemes, and the convoy would roll out to take on their adversaries. They were soon met by a squad of flying Decepticons, but were at a strict disadvantage against their adversaries as their vehicle modes possessed no weapons. The Autobots nonetheless managed to fight their way to the Decepticons’ base, one way or another, and defeated the Decepticons by using their own gravity weapon against them. Desert Flight
This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
Optimus Prime was one of only two Armada-theme figures in the otherwise Generation 1-centric Q-Robo Collection line of super deformed PVC figurines, the other being Armada Megatron. Like all the figures in the series, Prime featured articulation in the neck and shoulders, and was also available in a translucent colored plastic: as an Autobot, Optimus came in translucent red, but was also uniquely available in a golden metallic "pewter" variant as the wave's solitary rare chase figure. All Q-Robo figures were sold in sets of two, one full-color figure and one translucent one, blindpacked in a plastic capsule.
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.
Available with Grimlock, this Optimus Prime is a redeco (or possibly a repaint) of the figure above, featuring extra paint applications on the chest and thighs, and he features a different flame pattern on his side doors. His Autobot insignia is now tampographed on his right arm. The cyberglyphs on his front hood is confusingly translated as "PRIME". The 2-pack also comes with a card, which the glyphs being decoded as "DINOBOTS". Optimus Prime and Grimlock also saw release as a Toys"R"Us Japan exclusive, making this Optimus Prime redeco/slight retool to be first sold at Japanese markets.
Later, Orion Pax worked as an archivist in the Iacon Archives, and was friend to Ariel and Dion. Shortly after the trio encountered a group of time-traveling Aerialbots, the Archives were attacked by Decepticons, and Pax and Ariel were severely injured. The Aerialbots took them to Alpha Trion, who rebuilt them into Optimus Prime and Elita One respectively. Golden Age The Matrix of Leadership was passed to Optimus Prime following the death of Sentinel Prime at the hands of Megatron. The War Within During the war on Cybertron, Optimus Prime came to the aid of Getaway, Joyride and Slapdash, saving them right as the Decepticons Dreadwind and Darkwing were on the verge of destroying them. End of the Road
In the "Transformers" film, the robots had more of an alien feel to them to fit the theme of an alien invasion. The robots (stated by Optimus Prime) in the film are actual sentient organisms and not just giant, mindless, and mechanical machines. The robots can also speak their own alien language sounding like what seems to be based on different pitches and frequencies. Alongside that, they gave them more alien features that probably wasn't mentioned in the comics or T.V. series such as a highly advanced exoskeleton, force field, and a special "alien meteoroid" mode which they transform into individually and arrive on earth in. The exoskeleton is a "self-regenerating metal" in which the aliens are composed of (stated in the film) that is the equivalent of living skin that heals itself.
Although Rodimus plays the part of the brash youth, he is actually very intelligent, and has no loyalty to Optimus Prime; only his own personal gain. According to his biography, Rodimus used to be leader of the Wreckers, a mercenary group hired by Optimus Prime; but after the deaths of the other members, he joined the Autobot Seekers under the command of Goldbug.
This mold was redecoed by Takara in 2000 as Car Robots Black Convoy. The following year, it was released by Hasbro as Black Convoy's 2001 Robots in Disguise franchise counterpart, Scourge, with retooled discs that lacked the Autobot insignia. Following this, the next use of the mold was planned to be Universe Toxitron, which ended up being canceled. The modified tooling was also used when Laser Prime was reissued by Takara in 2006 with a modified deco (see below), and for the e-Hobby exclusive Laser Ultra Magnus that accompanied the reissue's release. In 2015, Platinum Edition Year of the Goat Optimus Prime, another repaint version, comes with partially transparent plastic torso.
In the episode "Along Came a Spider", Optimus discoveres that Elita did survive the ordeal with the giant spiders and was transformed into the technorganic Decepticon Blackarachnia. He offeres to try and help her, but is turned down violently as Blackarachnia has still not forgiven him. However, when she nearly dies trying to use the Allspark key to purge her organic half, Optimus saves her and repeats his offer to help her. She stings him instead, vowing that she will never trust him.

The two sides found themselves equally matched until the Constructicons merged into The Devastator. The tables were turned once more when the Dinobots appeared, and mercilessly slaughtered the Constructicons. The Decepticons' plan foiled, Optimus decided that the Autobot-Decepticon war had come to an end, despite Megatron's protests to the contrary. He and his Autobots then drove away victorious. Battle for Earth
Optimus Prime was one of three Transformers characters immortalized in Gummy Candy form by the Frankford Candy & Chocolate Company. Released during the time when Classics had just replaced Cybertron on the toy shelves, Prime's candy depicts him in his Cybertron body, alongside Generation 1 Bumblebee and a kooky Cybertron/Classics Megatron cross-breed. The candies were all sold individually in blister bubbles.
The largest Movie Optimus Prime toy (until Revenge of the Fallen, that is), Leader Class Optimus Prime features the most accurate representation yet of the CGI designs' complex transformation sequence, the only difference being the arms which are placed behind the cab while they constitute the hood in the CGI model. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion Blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel (known among fans as a 'hitch') is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]
A second Target-exclusive redeco of the Voyager Class Optimus Prime toy, the gray molded pieces were recolored beige-grey, and multiple parts that were previously molded in blue and red (the chest, shoulder pads, and leg interiors) had their mold colors swapped, with extra paint operations to make up the difference. As such, the toy has very few visual differences from the regular release of the sculpt, in a "doing things differently to achieve a very similar end result" sense. This version was only available in a pack with an unchanged Deluxe Class Bonecrusher.
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).

Generations Selects Ricochet and Red Swoop - Following our last news post regarding this new "Generations Selects" toyline (previously called "Select Series"), we finally have new images of the first two releases, Deluxe Class Red Swoop and Ricochet! These two figures are redecos of Power of the Primes Swoop and Jazz respectively. Red Swoop is based of the original G1 toy's colors (which can be found on the stock renders for the Power of the Primes toy), while Ricochet is meant to evoke the Headmasters character Stepper.


Available only with the Bot Shots Dragon Track set, this version of Optimus Prime is a new mold, changing from a robot form resembling Generation 1 Optimus Prime, into a truck with a rocket exhaust molded into the back of its trailer. As a Flip Shot, he, er, flips up when auto-transforming. He comes with a launcher that can be connected to the track, as well as Flip Shot Megatron and his launcher.
Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). Another is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
Really great, well-researched article. I think you hit the nail on the head here – the fact that there are more expensive sets than ever before affects perception. Also, I’m pretty sure the presence of a baseplate (light but large) in the old sets made them seem bigger. I don’t like the lack of baseplates in new sets – it does make them seem smaller.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
When animating the scene in which Primal removes Prime's spark, Mainframe's animators consulted The Transformers: The Movie for reference on the interior of Prime's chest. Not realizing the importance of the Matrix of Leadership, they rendered it as a container for Prime's spark. Beast Wars writers Larry DiTillio and Bob Forward have since claimed that in their view, Prime had not received the Matrix from Alpha Trion at this point, but a later comic produced for Botcon indicated that the Matrix was in fact stored in a secondary compartment, hidden behind Prime's spark. In this particular comic, the alien Vok used the Matrix, the Transmetal Driver, and a control suit once piloted by the Predacon Quickstrike to create Primal Prime.
On Cybertron, Optimus Prime kicked back to do a little bit of paperwork and reminisce. With Shockwave defeated, Cybertron was enjoying a new era of peace. He was interrupted by Hot Rod, who reported that a group of "pesky humans with their peashooters" were giving an Autobot team on Earth a hard time. Prime suspected Cobra's involvement and counseled Hot Rod not to be so dismissive of the humans. The Art of War #1 When the team returned to Cybertron and mysteriously vanished in the Gladiator Zone, Prime was prepared to go search for them, but was convinced by Hot Rod to stay behind and organize a peace ceremony. The Art of War #2
Early in this new series of encounters with Megatron, Red Alert contacted the Autobots on Earth and asked for Optimus Prime to join then on Velocitron. Ransack and Crumplezone tricked Hot Shot and Dirt Boss into believing that a race between them would determine which of them would be allowed to race Override for the Planet Cup. During the race, Ransack and Crumplezone caused a rockslide that buried Hot Shot. Hot shot was saved when Optimus Prime, Vector Prime, and Landmine arrived, but Optimus was upset that Hot Shot had become involved with the locals. Clocker and Brakedown were eager to help the Autobots. After being unable to obtain the Planet Cup from Override herself, Optimus Prime endorsed Hot Shot's plan to win the cup in a race with the aide of the other Autobots. Ransack and Crumplezone were contacted by Megatron and were told to keep on eye on things. They also decided to enter the race, either to win the cup and cause as much damage as they could to the other racers. Override, Dirt Boss, Ransack, Crumplezone, Optimus Prime, Hot Shot, Red Alert, Landmine, Clocker and Brakedown participated in the qualification round.
Another release of the Leader Class Optimus Prime figure, now redecoed from the original Revenge of the Fallen Leader Class mold, but with the gimmick-less arms from the Supreme Class retool, and a pair of articulated fingers which was not previously used for the original release. He also retains his pair of Energon Swords and Hooks, and his Knuckle piece. He also retains the fuel tanks that can combine to form his ion blaster. In terms of deco, he features a darker plastic color and paint (which resulted in a two-tone shades of silver & gunmetal), which is meant to go with this line's Jetfire.

This is a redeco of Ultimate Optimus Prime. While Prime himself only features a red grill, the trailer has been extensively redecoed, with an ornate golden Chinese dragon being painted on the trailer panels, and the various gray parts of the trailer panels, armor, and cannon being replaced by blue, red, gold, and burgundy. The toy was released as a "Year of the Dragon" Special Edition in 2012, since the Chinese Zodiac sign for that year is the Dragon.
He resembles previous Optimus characters in robot mode: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
×