Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.
Prime would make one further surprise appearance in Dreamwave's Transformers: Armada comic series, although it would not be the Prime of Dreamwave's first series. When the Optimus Prime of the Armada universe disappeared, pulled into another dimension by the power of Unicron, the Chaos-Bringer sent something back in his stead: a nearly dead Optimus Prime from that universe, who warned the transformers of Unicron's coming into their universe before dying.

This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.

An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!

In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[21]
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.
Available exclusively from Japanese clothing company A Bathing Ape in April 2012, "Convoy Reissue BAPE Ver. BLACK" (コンボイ復刻版 BAPE® Ver. BLACK) is a redeco of the original Optimus Prime toy sporting a unique new grey color scheme, along with a grey trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.

Of course, while Bumblebee does a lot of serious action in the films, tumbling and punching and kicking, you don’t see McFly doing a whole lot of that in the Back to the Future films. In fact, McFly doesn’t get up to too much more hard-core physical action, aside from some skateboarding and wailing on the guitar. Nevertheless, Fox does have a distinctly bowlegged gait, and you can see some of that in Bumblebee, and you can maybe see some Fox mannerisms in his more casual interactions with Sam Witwicky.
As a result of striving for vehicle realism and painstaking accuracy to his visual portrayal in the live-action films, this Optimus Prime ends up being ridiculously complex. Transforming him back into a truck is probably more complicated than shown in the movie and can only be considered torture. Very unfortunately, the instructions for this toy are infamous for being amazingly vague and unclear in their visual depiction of the transformation steps, making transformation even harder. Also, let us not forget that, upon transforming him back to robot mode, he will declare his identity over and over and over and over and over until you're finished.
A single-packed version of the battle damaged Voyager Optimus Prime toy from the Sam's Club exclusive three-pack. Although the assortment number and the general packaging style seemed to indicate that this might be a Best Buy exclusive, this has been confirmed to be an "international market" exclusive. It has been released in Asia, but will presumably not be available in the USA outside the Sam's Club three-pack.
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.
In a world where the Transformers' war settled into a series of friendly competitive races known as the Transformers GT, Optimus Prime became the GT Transformer known as GT-R Prime. As a racer he was known for his serious but sometimes hot-blooded personality and his skillful use of the Impact Wrench Gun, though he maintained an honorable policy never to fire directly at an opposing racer's body. Like other racers, GT-R Prime put a limit on his own strength by separating his Matrix into a GT Sister, creating his partner Misaki.
For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.

Optimus Prime is primarily voiced by Peter Cullen in most of his incarnations, who voiced him in the original series. Following the production of the 2007 film, Cullen reprised his role for the sequels and supporting media and would even voice Optimus in later series such as Transformers: Prime. Optimus has been voiced by a number of other voice actors in other series such as Neil Kaplan, Garry Chalk, and David Kaye in the series Transformers: Robots in Disguise, Unicron Trilogy, and Transformers Animated, respectively.
There is also the release of Optimus Prime as a deluxe sized brown gorilla which is a repaint of the Beast Wars 10th anniversary Optimus Primal toy most likely trying to tie Optimus Prime in some way to the jungle planet Animatros in the Cybertron series. According to his bio, Optimus Prime was temporarily mutated into this form by the Animatros Cyber Planet Key. The colors of this toy are a homage to Transformers: Universe Optimus Primal.
Optimus and Bumblebee snuck into the Decepticons' base, and found their enemies upgrading themselves with Autobot parts. The pair took offense to this, and Bumblebee set about sabotaging the process. Megatron wound up tripping on some gumballs thanks to the Autobot's mucking about, and Optimus congratulated his fellow Autobot on a prank well done! Intro!
Optimus was providing cover-fire for a cross-universal battle when he suddenly seized up. Though he rebooted momentarily, he had terrible news for his Protector allies: using the power of the lower-dimensional Planicrons, Megatron had succeeded in sundering the Alternity's aggregate! Optimus urged his subordinates to not lose hope however, reassuring them that events were still unfolding within the parameters they had foretold. Sure enough, the battle swayed back in the Autobots' favor when Thundercracker, disgusted by Megatron's reckless use of their power, freed the Planicrons and robbed Megatron of his most powerful weapon. Optimus then tasked Elita Seven, the black Convoy, and Bumblebee to track down the doorway that would allow the Planicrons to ascend to the higher-dimensions, putting them on the path to supersede the Alternity as multiversal protectors. While they attended to this task, the rest of the now-former Alternity busied themselves by destroying Megatron's auto-avatars, weakening the villain and disallowing him from interfering further with the Planicrons' destiny.
Four million years ago, Cybertron, shaken from its orbit and drifting through space, became threatened when it floated into the path of an asteroid field. Prime led a group of elite Autobot warriors on the Ark, the Autobot starship, on a mission to destroy the asteroids. Although the mission was successful, during the aftermath of this mission, the Ark was attacked by Decepticons hoping to overpower their weakened foes. Intent on keeping the secrets of the Ark from the Decepticons, Prime set the craft on a suicide course, crashing it into the then prehistoric planet Earth.
The figure also comes with two gun accessories, the "Eliminator Gun" and "Assault Blaster", which combine into the "Mega Striker", a rifle that closely resembles the one used in Dark of the Moon. The separate guns also have a MechTech-style transformation, and pulling a lever transforms them into alternate crossbow-like shapes. In "battle vehicle mode", the sides of the truck are rotated up, and the guns can be attached by small pegs to holes in the modified smokestacks, or they can plugged into any of the standard connection points with their 5mm posts... except the ones on the hinge behind the cab, since those are supposed to be for his Energon battle blades.
Alternators Optimus Prime transforms into an accurate, fully-licensed 1:24th scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. His robot mode body sculpt details are based upon the 20th Anniversary Optimus Prime toy. However, his headsculpt is based upon Powermaster Optimus Prime. He is armed with a small pistol that is formed from his engine.
Template:Pp-semi-indef Template:Multiple issues Optimus Prime is a character from the Transformers franchise. Prime is the leader of the Autobots, a faction of transforming robots from the planet Cybertron. The autobots are constantly waging war against a rival faction of transforming robots called Decepticons. He is depicted as a brave, powerful, wise and compassionate leader who puts his talent to use improving the universe around him. Optimus is portrayed as having a strong sense of justice and righteousness and has dedicated himself to the protection of all life, particularly the inhabitants of Earth.[1] According to Bob Budiansky, co-writer of the Transformers series, Dennis O'Neil was responsible for his name.
Based on Optimus Prime's Cybertronian form as seen in the Dreamwave comic book "The War Within", this version of Prime transforms into Cybertronian truck. The figure was personally designed by comic artist Don Figueroa, who created the original comic design in the first place, and his signature is left on the figure in the most literal way: the word "DON" can be seen sculpted into the barrel of his silver ion blaster.

A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.
Part of the fifth wave of Kabaya's revival of the Transformers Gum series, this snap-on transforming model kit of War for Cybertron Optimus Prime is sculpted from red, light blue, and gray plastics, and uses stickers for detail. He comes with a blue non-transforming version of his hand-held blaster rifle, which mounts at the rear in vehicle mode. He comes packed with a model kit of Tigerbreast, and a stick of gum.
Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and SideSwipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.

Optimus Prime Special Color (オプティマスプライムクリアVer, Optimus Prime Clear Ver) was only available blindpacked as part of TakaraTomy's EZ Collection Vol. 3. It is a clear version of the Revenge of the Fallen mold, casted in (entirely colorless) clear plastic with opaque paint operations (which is the same paint mask from the original Legends Class toy albeit slightly darker) on the details. This redeco also uses the slightly small fuel tank/elbow tabs from the Battle Damaged release.

Classics Optimus Prime was initially intended to be Deluxe-sized. An alleged list of the tentative Classics line-up[20] included a Deluxe-sized Optimus Prime without a trailer and a version with a trailer at the Voyager price point; however, it appears the decision was eventually made to upscale Optimus to Voyager size instead.[21] Don Figueroa's control drawings for the Deluxe version were leaked before the Classics line was even released at retail.[22] A gray model prototype was later shown as part of an interview with TakaraTomy's staff in Transformers Generations 2009 vol. 1.[23] It's unclear whether the trailer ever made it past the early planning stage before the size of the figure was changed.
Later, the Transformers were all transported to Cybertron by Primus to battle Unicron. Although Unicron had tainted the Matrix after killing Thunderwing, Prime managed to reacquire and purify the Matrix. Prime then sacrificed his life one more time to destroy Unicron by plunging the Matrix into his maw. The Powermaster process, however, had been working to fully bond Prime and Hi-Q. Prime's death completed the process, and the two minds and souls became one. Hi-Q's biomechanical body was stripped down and reconstructed by the Last Autobot, resurrecting Optimus Prime once more with the two minds now one. Prime rejoined the other Transformers on the planet Klo and routed Bludgeon's Decepticons.

Many who received their first LEGO set in the early 1990’s are now adults looking forward to buying a LEGO set for their first child or for themselves. When we are younger, we do not fully understand how money works. We do not realize that a large LEGO set can require hours of work to earn. We only know what we want. I would wager that it isn’t until our first jobs that we can fully appreciate the value of money. We all wanted the large sets as kids and we didn’t realize how hard our parents had to work for them.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added.[24] Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[25] In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10.[26] In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.[27]
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.

On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial
Released exclusively in Asia, Shadow Spark Optimus Prime is a redeco of the Age of Extinction Leader Class Optimus Prime, featuring dark grey plastics, weathered deco patterns, and some opaque plastic which was recasted from transparent plastics. He features a scratched Autobot insignia on the right side of his sleeper-cab, and a Cyberglyphic on the left side of the front hood. Some weathered parts does not match well with some other parts (the fenders, for example).
This deluxe-size, highly-poseable version of Armada Optimus Prime is an entirely new mold, retaining the ability to tow Super Base Prime's trailer, though he cannot combine with it. He comes with the Mini-Con Over-Run, who can transform into a gun for him, or can peg onto the Powerlinx plug on Optimus's back to activate a double-fisted "punching" action (that looks more like hyperactive shrugging). Like the Super Base figure, Prime has a flip down chestplate, but lacks a molded-in Matrix, and his smokestacks can be removed (and in many cases will simply fall off), but cannot peg together as a gun. Shipping in a great many waves throughout most of the later run of the line, Super-Con Optimus became a notorious pegwarmer.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
The series begins when Optimus and his crew, after picking up a disillusioned ninja named Prowl, are sent to clear rubble from a space bridge passage. There, the Autobots stumbled upon the Allspark and are immediately attacked by Megatron's battle cruiser, the Nemesis. Through treachery by Megatron's second-in-command, Starscream, Megatron was fragged and the Autobots crashed on Earth in the early 21st century. After being in stasis under Lake Erie for 50 years, the Autobots awaken in Detroit of the near future, where they immediately discovered humans in need and became heroes of the city after stopping a Sumdac Industries experiment gone wrong. During the battle for the possession of the Allspark, Optimus goes offline after defeating Starscream, only to be revived by Sari Sumdac and her Allspark-infused key.

Hasbro executives, high off the revival of G.I. Joe through the same marketing concept, decided to acquire rights to toys from a variety of Japanese “Super Robot” series. Transformers didn't introduce the concept of super robots to the United States, but for the first time, the genre became widely recognized and popular outside of Japan. As the Transformers brand grew throughout G1, it began to define the genre, and all other super robots were measured competitively to Transformers' standard.
1 is the TF/ Evangelion crossover edition of MP 10 Optimus Prime. Honestly Im not familiar with Evangelion but OP in purple and green is just sick. 2 is the MP version of Sideswipe, but Takara calls him Lambor. 4 is the "marlboro edition" Diaclone repaint of MP Wheeljack. It was supposed to be released in March, but Phillip Morris blocked its sale in the U.S. bc they suck. Luckily my homeboy /u/dajoeker was able to help me get a hold of one.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.

Rodimus can be unlocked by beating "Dam 6" in Arena Mode, credited as Hot Shot. Rodimus is described as being young, impetuous, showing enthusiasm and confidence which borders on arrogance. He boldly claims that he has both skill and looks, though he is not too keen being paired with Kup on missions. Somehow, he became corrupted by Dark Energon. If the player manages to defeat him, he calms down, shrugging off the effects of the Dark Energon and returning to his regular self.


Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
Optimus Prime is the Autobot leader on Transtech Cybertron. On Transtech Cybertron, Optimus Prime is a gifted politician who has forged an alliance with Megatron, the militaristic leader of the Decepticons. together, they helped bring forth a golden age on Cybertron. Transtech Cybertron is unique among Cybertrons of alternate universes in that war has not broken out between factions.[171]

Part of the third wave of 2012-onwards Generations Legends Class toys, Thrilling 30 Optimus Prime is a new mold that is roughly the same size as a Cyberverse Commander Class toy. Both his truck and robot mode are based on his Don Figueroa-designed body from IDW's ongoing series, and features 5mm-compatible hands and roof. He comes with an Ion Blaster which has both 5mm and 3mm posts.
In Axiom Nexus, General Optimus Prime found himself inducted into the Convoy, a group of Optimus Primes and their kin dedicated to safeguarding the multiverse. While the other Convoy members tended to stay in the upper reaches of Axiom Nexus, the General was able to use his unusual appearance for an Optimus Prime to venture in the Offworlder zones without suspicion, a great help to Offworlder Zone Security Administration Commander Cheetor. The General was also assisted in his new mission by his longtime scout, Sergeant Hound. General Optimus Prime profile card Sgt. Hound profile card
After the successful Armada toy line, Hasbro/Takara introduced Transformers: Energon. The accompanying television series program was a direct continuation of the events of Transformers: Armada and featured many of the same characters in new forms. This was reflected in the toy line, as characters such as Hot Shot, Jetfire, Optimus Prime and Megatron were all released with entirely new molds.
The Hasbro website explains it best: "The rogue DARK NINJA MASTER was exiled to a cave beneath Arashikage Mountain for betraying the ninja clans. After finding the Moon's Blood, a mystical stone of great power, he was able to channel the energy of dead ninjas, making him almost unstoppable. Seeking revenge, he has emerged from his subterranean prison to destroy all ninjas. Only two people can stop him: STORM SHADOW and SNAKE EYES. The two adversaries must join forces, for only by working together will they be strong enough to defeat this evil super-ninja."
Optimus Prime landed in the Himalayan Mountains with G.I. Joes Flint and Hawk. As they searched the area, the trio was attacked by Bludgeon in his Pretender shell. Prime whacked him with his energon-axe and in return Bludgeon bearhugged him and coated him in metal-eating slime. Hawk, still carrying power from the Matrix, helped Prime break free. Optimus then shot his way into the hidden kingdom of Cobra-La.
An additional oddity is that unlike every other toy in the Go! toyline, Optimus Exprime came packaged in a box without a window. This is potentially because of the sheer amount of information TakaraTomy wanted to print on the box, or because they were unable to fit him into the box in robot mode with all of his accessories displayed. Whatever the reason, it left him with a smaller box than the other voyagers in the line, a substantially-altered box layout, and a much shorter profile.
The figure has diecast in its feet, shins, and abdomen. It features pinstriped flames, articulated fingers, a headsculpt with a face that can rotate between masked and unmasked modes in a method identical to Armor Knight Optimus Prime's, and an abdomen that opens to reveal a chamber housing a diecast Matrix of Leadership. He comes with said Matrix, his Ion Cannon, and a pair of Energy Swords that tab in behind his wrists (the hands unfortunately have to be bent forward to accommodate these). All three weapons can combine and store on the fifth wheel in vehicle mode.
An undocumented transformation step includes flipping Optimus Prime's knees out in vehicle mode to form a back bumper with tail lights. Oddly, the toy itself and the package art show Optimus Prime with four fingers on each hand, while he has 5 fingers in the video game. The vehicle mode pictured here is minimally mis-transformed: The exhaust pipes have not been rotated to hide the indentations against the vehicle body. The instructions show the rifle being plugged in by its shorter peg, but the packaging depicts the rifle stored by its grip, which keeps the weapon higher off Prime's body, but is also more secure.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More

The Decepticons' initial strike came abruptly and brutally, devastating entire districts of Metropolis. Optimus was meeting with Hot Rodimus as this took place, and was nearly overcome with grief when Ratchet informed him of the carnage the Decepticons had wrought. Steeling himself, Optimus coordinated the city's defenses, ordering his troops to be dispatched where they were most needed to repel the invasion. Upon spotting an old enemy on one of the nearby monitors, Optimus geared up to go in the field himself. Arming himself with his favorite pistol, Optimus resolved to take down Megatron. Raid
Then he dreamed of awakening, only to find his troops smashed. Realizing his only hope for survival lay with Cybertron, Optimus then boarded the ship the Autobots were repairing, and travelled back to his home planet. Arriving on Cybertron, he found it completely under Decepticon domination. Optimus then met an old Autobot codger who pleaded that he return to Earth to gather a force that could overthrow the Decepticon’s regime. Optimus remorsefully told the old Autobot that there could be no reinforcements from the planet Earth. The two Autobots were then swarmed by Decepticon police officers, who Optimus fought until his dying breath…
Takara's iteration of Combiner Wars Optimus Maximus is sold in a gift set including all five Autobots (minus the Rodimus mold). This version of Convoy has numerous changes in deco to better match his look in the Generation 1 cartoon. Like Unite Warriors Menasor, the set also features some minor improvements to the original sculpts, such as improved hip-ratchets for Convoy for increased stability. He also had the slightly modified pegs that Legends Class Rodimus (or Blackjack, Runabout, and Runamuck) can securely attach to, which was previously used for Battle Core Optimus Prime. While he features foil insignia stickers on his robot mode shoulders, he also features tampographed Autobot symbols on his side truck panels.
The details between these events differ between universes. Sometimes Optimus Prime merged with Vector Sigma soon after defeating the Hate Plague, and returned much, much later as Star Convoy. Sometimes Optimus Prime partnered up with Marissa Faireborn to receive upgrades through mutual kissing. Sometimes... look, he did a lot of weird stuff, okay? He later sacrifices himself to restore the Matrix of Leadership.
If you’re a child of the ‘80s and grew up with the original The Transformers cartoon, Bumblebee may have been the second Transformer you ever saw-- in the narrative of the show, anyway. In the first episode, “More Than Meets the Eye,” you would’ve started off by watching the memorable opening sequence. There, you first get a quick glimpse of a group of five Autobots in vehicle mode, including Bumblebee alongside Optimus Prime.

Released as part of the second wave of Clash of the Transformers subline imprint that's exclusive to Toys"R"Us stores, this Power Surge Optimus Prime is a redeco of the toy above, featuring transparent blue parts, white paint applications to the shoulder armor/front truck kibble, his chest, & leg/trailer striping to resemble his larger Power Surge Optimus Prime figure.


This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.
As with other Dark of the Moon Activators toys, this Optimus Prime (released under the Robo Power subline) is a very simple one-step transformation toy. You simply slam him down on the big blue button on the back end of his truck mode and he transforms thanks to spring-loaded mechanisms. To transform him back, just slam him down again on the same blue button.
Available with Grimlock, this Optimus Prime is a redeco (or possibly a repaint) of the figure above, featuring extra paint applications on the chest and thighs, and he features a different flame pattern on his side doors. His Autobot insignia is now tampographed on his right arm. The cyberglyphs on his front hood is confusingly translated as "PRIME". The 2-pack also comes with a card, which the glyphs being decoded as "DINOBOTS". Optimus Prime and Grimlock also saw release as a Toys"R"Us Japan exclusive, making this Optimus Prime redeco/slight retool to be first sold at Japanese markets.
The SS-03 version of Takara's Deluxe-class Optimus figure, based on the Anniversary release, was released in Hasbro markets in a two pack with the smaller Japanese Megatron figure. There are some tiny but notable differences between this and the Anniversary figure; the Hasbro version uses a more neutral dark-gray for the main body as opposed to the Takara version's blue-tinted dark-gray, plain dark-blue plastic rather than dark-blue-with-sparkles, and plain yellow paint for the cab's lights rather than sparkly-yellow/gold.
Later, at the peace celebration, Prime was watching a procession of Autobots when Decepticons attacked. Optimus ordered Omega Supreme into action but the huge Autobot was quickly overcome by Menasor, Piranacon and Predaking. The Art of War #3 Prime hopped into the fray, saved a civilian from getting smushed by the falling Omega, rode Sixshot into Piranacon's face, smashed Astrotrain into the ground, and carried a wounded civilian out of danger.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[8] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[9]
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!
Optimus Prime is primarily voiced by Peter Cullen in most of his incarnations, who voiced him in the original series. Following the production of the 2007 film, Cullen reprised his role for the sequels and supporting media and would even voice Optimus in later series such as Transformers: Prime. Optimus has been voiced by a number of other voice actors in other series such as Neil Kaplan, Garry Chalk, and David Kaye in the series Transformers: Robots in Disguise, Unicron Trilogy, and Transformers Animated, respectively.

I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.
Mission Racer Optimus Prime features a pull-back gimmick by using a rubber band: insert the rubber band onto the front and rear post, then place Optimus Prime onto the ramp and pull his trailer backwards, and release the trailer for allowing the truck to zoom forward. The rubber band also has Optimus Prime's name and the Autobot insignia tampographed oh it.
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.

A giant-sized transforming Optimus Prime figure is set to be released for the third film. The set comes with a Leader Class-sized Optimus Prime figure and a trailer that transforms into his Omega Combat Armor - both of which combine to form Prime's Ultimate mode.[126] This set will be released on August 1st, 2011, a month after the film's premiere.


Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
Categories: Articles in need of imagesUnreleased toysCharacter stubs missing toysAge of Extinction AutobotsBattle Masters AutobotsBumblebee AutobotsConstruct-Bots AutobotsCostco exclusivesDark of the Moon AutobotsKmart exclusivesMasterpieceMovie AutobotsNESTPlatinum EditionQ-Transformers charactersRevenge of the Fallen AutobotsSam's Club exclusivesStudio SeriesTarget exclusivesThe Last Knight AutobotsTitanium SeriesToys "R" Us exclusivesTransformers (2010) AutobotsTriple ChangersWal-Mart exclusives
Some time later, as the war raged between Autobots and Decepticons on Earth, Optimus had requested the Aerialbots as reinforcements from Cybertron. Though they nearly defected to the Decepticons, Optimus was able to secure the Aerialbots as allies. Later, when a power plant had to be evacuated of its human workers due to the fear of landslides, Optimus posted Denfensor at the location to secure its protection. Optimus then drove off to check up on the rest of his troops who were aiding in the area’s evacuation. Though he passed a military convoy heading towards a plant, he thought nothing of it, unaware that they were the newly created Combaticons in disguise. Optimus then reached the Ark, and from there opened communications with the Aerialbots. Optimus had someone come into the know that the Decepticons were moving in towards the plant. He watched from afar as Defensor and Superion fought Menasor and Bruticus, wary to send more Autobots into the fray while these titans wreaked havoc onto the battlefield. Optimus allowed himself a smile when the Aerialbots and the Protectobots proved themselves superior teams to the Decepticons’, though at the back of his mind, he was wary. After all, Megatron himself had chosen not to add his considerably weight to the battle... The Special Teams
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
×