The main difference is an extensive redeco, rendering Prime in his traditional colours instead of the iPod-inspired white. (Yes, it actually had more to do with iPods than Magnus, believe it or not.) Reminiscent of the Kiss Players, iPod Optimus Prime's entire ABS/PVC structure is painted over, including his fists and the silver stripe that runs along his chest. His wind shield is colored blue like the one in the 2002 New Years Convoy reissue. The silver-grey trailer has a fairly elaborate deco, featuring detailing that resembles the outward appearance of the traditional Prime trailer, including the doglegging blue stripe and Autobot symbol, an effect somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three, count 'em, three logos proclaiming the name "Optimus Prime". The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this would be largely covered by the intended insertion of an iPod.

The figure seems to have some transformation scheme & design related problems in it: The front truck cab's upper two pieces are supposed to be pushed to the front in robot mode, but the piece keeps collapsing back due to looseness when the figure is standing straight (Though pressing the two halves together firmly tends to reduce this issue for a while), while the tab underneath the truck grill does not connect well with the bottom port. Additionally, his 5mm compatible hands have a slight problem with wielding weapons with short 5mm posts.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
As had first been done in the Armada line, Takara elected to supplement their release of the Super class Optimus Prime figure with a new-mold Deluxe class toy. Coming without trailer, Prime Force or electronics, this Prime discarded the larger toy's ability to form Super Mode in favor of being able to Powerlinx with the other compatible toys of the Energon line, forming either a torso or a pair of legs that the other Autobots could connect to. Like the Deluxe Armada Prime, this one too was on the small side for its size class, but just as that figure could, this small Prime can still tow the Super class figure's trailer.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
Voyager Optimus Prime is a redeco of the toy from the first movie's toyline. Like several redecos or retools of 2007 movie toys, there has been some effort to make this release noticeably different from the previous releases, though the toy ends up looking less accurate to the actual movie appearance than those previous releases. Optimus Prime has a sort of faded Autobot logo on the side of the truck's bunk, and kanji (Chinese characters) on the roof (ending up on his knee in robot mode.) The word "上海将军" means "Shanghai General", while "大将" means "Grand general".

In one possible scenario, Optimus was surprised to see Beachcomber return to Autobot headquarters soon after his departure. Beachcomber informed Optimus that he had uncovered the Decepticon's newest hidden fortress, and he suspected that the Decepticons were up to something big. Optimus sent out Beachcomber once more, this time along with Powerglide and Windcharger to investigate the Decepticons' plot further.
I had a transformers armada (ew) style Megatron with horns like a stag beetle that would turn into a tank. I actually liked the whole design and was upset when my sis broke it on purpose. She'd always tell on me for stupid shit so I saved this incident as a trap card for later. Too bad this sort of thing had a statute of limitations in our house lmao.

Transformers: War for Cybertron was released in June 2010 for the PlayStation 3, Xbox 360, and Nintendo DS. The game takes on Cybertron during the Great War between the Autobots, led first by Zeta Prime and then Optimus Prime, and the Decepticons, led by Megatron. Transformers: Cybertron Adventures was released alongside War For Cybertron for the Wii and utilizes the same characters and setting.
Nearly all the chrome is worn off, the tips of both smokestacks are broken, the fists and guns and voice box are long gone, there's a huge chip of plastic broken off one of the shoulders. I still have the trailer, but it's also broken in a few places. The door is gone. The spring-loaded gimmick doesn't work anymore. The repair drone broke off entirely near one of the joints on the main arm and was thrown away many years ago.
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!
As part of the Robot Replicas line, this version of Optimus is a non-transforming action figure that utilizes Revoltech-style jointing. The sculpt hews much closer to the movie CGI model than is possible with the full transforming toys, plus the universal jointing of the line allows for his forearm to be replaced with his hand-cannon... or bits from other Robot Replicas.
Having been removed from toy store shelves after 1985, Optimus Prime was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie premiering that year. He cost $21.50 and 5 Robot Points. He was also offered in 'The Autobots Have A Special Mission For...' mail-away pamphlet and came with a special "Movie Edition Certificate" and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.
The second known version [4] ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.

Tiny Turbo Changers Optimus Prime is a small, stumpy, soft-plastic blind-bagged mini-figure that changes from robot to a licensed Western Star 5700 OP Truck with just a few simple steps. He features ball-jointed shoulders and hands that are compatible with Cyberverse weapons and other 3mm post accessories. Like all Tiny Turbo Changers, his vehicle-mode tires do not spin, sorry.


Meanwhile, the U.K. offices of Marvel Comics were producing their own storylines. Writer Simon Furman offered a different take on Prime, that he was weary of the war he had been forced to fight. In the "Prey" storyline, Prime arranged for Wheeljack to build a copy of himself and destroy it to see how the Autobots could cope without him. Unfortunately, the plan was derailed by Megatron and the Predacons. During the battle, Prime, Megatron, and Ultra Magnus were transported to Earth. There, Prime accidentally interrupted his own funeral service. The theme of war-weariness would again come to the fore in the U.K. strips detailing Prime's U.S. death.

According to the bio printed in the Transformers Collectors Club magazine, Optimus Prime was a member of the Cybertron Dimensional Patrol, but was abducted by Unicron. It is unknown whether he repainted himself yellow before being abducted or if the recoloration was due to the radiation emanating from Unicron, which has a tendency to recolor Cybertronians.
Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.
The trailer unfolds to form a battle station bristling with many firing weapons. Primarily, it can fire an air-powered missile launcher, a ripple rocket launcher with 5 missiles that can be launched individually (this turret can also be mounted in Laser Prime's hand) and a 'disc launcher', that fired several blue plastic discs adorned with the Generation 2 Autobot sigil. This disc launcher is the only weapon that can be used in vehicle mode.
Optimus awakened to the sound of Ratchet's voice. Taking in his surroundings, he noted that he was now in an organic forest, surrounded by unfamiliar Cybertronians. It soon dawned on him that he had been transported to the dimension where Megatron had intended to begin his conquest: the OG World. The 'bots surrounding him were the local counterparts to his own Autobots, including his own doppelgänger! The locals informed him that they had found him thanks to the help of his "companion," a small robotic girl. Before Optimus could puzzle out who this humanoid was, the group came under attack by the local Megatron. Though badly injured, "Cloud Optimus Prime" had the strength to fight alongside "G1 Optimus Prime" against the Decepticons, and protect the girl that had brought the Autobots to him. During the fight, blasts from both Primes' rifles collided with a blast from Megatron's fusion cannon, knocking all of the combatants down. Cloud Optimus Prime ensured that the girl was safe before before his attention was drawn to the horizon by a familiar voice. It was "Cloud Megatron," who had also survived his inter-dimensional trip, and had come to continue his fight against his nemesis. Leap
Optimus Prime was the central figure of Kabaya's final Cybertron candy toy series, Change Galaxy, which was themed around his combinations with Leobreaker and Wing Saber. In addition to being transformable (again, through partial disassembly), this figure of Prime combines with the Change Galaxy versions of his partners, forming Savage Claw Mode and Sonic Wing Mode. Prime himself came packaged with an alternate Super Mode head and his leg armour in order to complete his appearance in each of these forms. Additional Super Mode pieces were not created for this line, as that wasn't the point.

While exploring Cybertron's hemisphere of darkness, Optimus Prime became severly damaged, and unable to return to the hemisphere of light. Having been able to send out one last message before his memory was badly damaged, Optimus found himself unable to distinguish friend from foe, and would join (or rejoin) whichever faction found him first. Optimus Prime Is Back


The problem there is that Star Wars took over the Space theme and Harry Potter took over the Castle theme. Just keeping up with the kids- sign of the times. What’s a castle lover to do? Compare 6075 (Castle) with (7094 Kings Castle Siege) and 4757 (Hogwarts) and they all have their own fantastic attributes. Sell the Harry minifigs and buy some crownies- problem solved.

This redeco of the Dark of the Moon Voyager Class Optimus Prime figure features a really unusual deco pattern consisting of red transparent tires, the vehicle front grill and fuel tanks (the fenders remained opaque red due to unpaintable plastic). Some of his parts like the vehicle front hood and the truck roof features a pattern similar to the ones used for the Tech Specs in the Generation 1 toys. He features a new sword and shield accessory, which can be used to decode the patterns.
As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures.
As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
Adventure Lucky Draw Optimus Prime is a gold vacuum metalized redeco of the original Warrior Class figure (save for some of his unpaintable thighs & upper shoulders) released as a prize for the Transformers Adventure prize draw campaign held between 25 July 2015 and 30 September 2015. To obtain it, entrants needed to send in four robot points clipped from the packaging of Transformers Adventure products.
Platinum Optimus is a redeco of the Leader Class Optimus Prime. Optimus' color palette is now darkened with some additional paint details. His "Sword of Judgment" is now a light blue. Optimus features more chrome on his "Vector Shield", chest, and on his head. The set was a shared exclusive, available from BigBadToyStore and Toys"R"Us, and was also sold during a Taiwanese event celebrating the launch of Transformers Rising.
Another redeco of Deluxe-Class Dark of the Moon Prime, this release uses a darker grey, a less magenta-y red, and less gold on the front end. Included is the trailer originally available with the Chronicle release. The trailer holds up to seven MechTech or similar 5mm peg accessories. Four holes are located on the top-front end of the trailer, with another three inside. The door also folds down to become a ramp, and the inside of the trailer is big enough for several Legion or Commander Cyberverse toys, or one smaller-end Deluxe figure. Two C joint bars also run along the bottom of both sides.
Available exclusively from Japanese clothing company A Bathing Ape in 2015, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique deep red color scheme matching the Convoy Reissue BAPE Ver. RED of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.

The internet can be blamed for the size and scope of the secondary LEGO market. On the website, BrickLink, you can find almost any set that LEGO has ever produced. In addition, the site keeps records of trends in the market and value of individual pieces. This site is invaluable to a LEGO collector and has given many the ability to grow their collections. Before the advent of this site and sites like eBay, collecting LEGO required going to garage sales. There are now whole sites dedicated to buying LEGO as an investment, but that is a topic for another article.
If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.
In this incarnation, Optimus Prime is the main protagonist and shows a near-xenophobic reluctance with interacting with other cultures, believing that such interaction would cause more harm than good. Consequently, he prohibits his team from mingling with the locals of Earth, Velocitron, and the Jungle Planet during their search for the Cyber Planet Keys. This attitude was drastically changed when Prime realized that the only way to acquire the Cyber Planet Keys from Velocitron and Animatros was to play by their laws.

A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.


Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love.
A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
LEGO is not a cheap toy and has never been. The brand has stood for nothing but the highest quality and hopefully any issues it has had with changes in manufacturing are only the result of temporary growing pains. Next time you are out buying a LEGO set for a loved one or for yourself, take a second to thank everyone who ever bought one for you as a gift.
In the movie, he starts out as a 1976 Camaro before modernizing himself. But the 2007 version (the fifth generation of the model) was a concept car-- you couldn’t even buy a new Camaro until 2009. They later switched to the production version for the 2009 sequel Revenge of the Fallen and he was yet another updated model for Dark of the Moon in 2011 (the SS model). In Age of Extinction, he appears both as a 1967 model and another new model of the current version. Finally, back in June, Bay tweeted that in next year’s The Last Knight, Bee would be a custom-built 2016 Camaro. Over the first two years of the relaunch, Chevy sold an astounding 140,000 Camaros and saw a 10% spike in the yellow model, thanks largely to our friend Bumblebee.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.
Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.

His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car.
The voice actor drama was written for OFTCC 2004 by Simon Furman, set after the events in the comics. Among those taken from their world via teleportation beam by Unicron and his Decepticon minions were Spy Changers Optimus Prime, Prowl, Ultra Magnus, and Ironhide. The Autobot forces opposing Unicron attempted to deflect a beam, leaving them all trapped on an uninhabited ice-world. The Autobot forces teamed up to overcome the Decepticons led by Reptilion. The Autobots were then, presumably, returned to their own worlds.
When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?

Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.
The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".
Brian Colin, Peter Smyth, Mark Buffington, Josh H., Propelstalz, Mary Crocker, Wayne Moulton Jr, Mitch Gross, Jim Valko, Andrew Brown, Lucy Ravitch, Nicholas Duresky, Heather Hofshi, John Kemp, Thorsten Karge, Natasha Dzurny, Keith Ives, Benjamin Chan, Neal Bhatnagar, Justin Farr, Regan Lee, Elaine, Nate Fugal, Stephanie Tennison, Jon Rasmussen, Ryan Pulis, Owen Duffy, Colman Reilly, Anthony, Mark Richman, Alexis Ohanian, Steve, Greg “TVsEgon” Skinner, Andy Saavedra, Daniel, Willie Raymond Taylor III, Chad Ingham, Irene Christian, Clinton Richmond, Jamey Stegmaier, James Allenspach, John Howell, Leif Terry, Tiago Pereira, Nathan Heath, Grinidon, Roman, Berserker Hew, Clark Stacey, Ben Harkins, Kayvaan Ghassemieh, Travis B., Justin Myers, Magna Nordgard, Jim Griffin, Jeff, David Smith, Matthew Titelbaum, Dennis Hitzeman, Daniel Lieske, Michael Jantze, Ruddy, Tom Damico, Kelson, Michelangelo Grigni
He next appears in Transformers: Energon, the only time during the Unicorn Trilogy where Prime is not the main protagonist. In Energon, set ten years after Armada, he is no longer able to combine with his trailer. Instead, he has been gifted with the Spark of Combination by Primus, allowing him to combine with the quartet of vehicular drones in his trailer. Fire One, Copter Two, Digger Three, and Submarine Four, can each form either an arm or a leg when they combine with Prime, creating his super mode. Later, Prime gained the ability to combine with fellow Autobots Wing Saber and Omega Supreme, the latter case creating Optimus Supreme.

Part of the second wave of Warrior class figures, this Deluxe-sized Optimus Prime transforms into a futuristic trailer truck. Due to his simple transformation scheme, he has a faux window chest in robot mode, while the end of the front trailer kibble has extra toes. Optimus Prime also comes with an axe, which was based on the Energon Axe weapon from the War for Cybertron game. Undocumented in the instructions, Prime's axe can store between his trailer, or plug into ports on either of his shoulders. His scannable Autobot insignia is on his robot mode left shoulder and is easily scannable while still in-package.
For Transformers: Age of Extinction, Optimus Prime initially transforms into a rusty 1973 Marmon semi cab-over truck and later on a new alternate mode in a blue and red Western Star 5700 Custom semi-truck.[31][32] After humanity turns on all Transformers, regardless of faction, Optimus and the other Autobots go into hiding. Eventually, they find themselves being hunted by a rogue organization called Cemetery Wind. Optimus is severely injured in a trap set by the group, while many of the other Autobots, including Ratchet and Leadfoot, are slain. An inventor, Cade Yeager, comes to Prime's aid and helps restore his health. After uniting with a small band of Autobots, Optimus faces Lockdown, a ruthless bounty hunter allied with the humans, and KSI, an organization that produces man-made Transformers. Optimus is captured by Lockdown, but the Autobots rescue him. Optimus is quickly losing faith in humanity, but at the urging of Cade, chooses to stay and fight a resurrected Megatron and his new army. Prime awakens the ancient Dinobots, and rides a newly tamed Grimlock into battle through Hong Kong. He kills Lockdown and Harold Attinger at the film's climax as revenge for killing many of his friends, including Ratchet and Leadfoot. At the end of the film, he leaves Earth and flies off into deep space, seeking to find out the truth about his mysterious Creators.[33][34]
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
Rodimus was seen in the season 3 "Transwarped" special, leading his team in defending a Space Bridge from Strika's "Team Chaar". His team was overwhelmed, and Rodimus is infected with Cosmic Rust, courtesy of Oil Slick, putting him out of commission. According to Derrick J. Wyatt, Rodimus is back on Cybertron de-rusting. He can later be seen on Cybertron cheering for Optimus Prime and his crew for defeating the Decepticons in "Endgame, Part II".
This golden chromed redeco of the Super class Optimus Prime figure was initially offered as a prize to five lucky winners of a colouring contest held in the pages of the TV Magazine. Additional units were later given away via in-store draws at Toys"R"Us Japan; precisely how many is unknown, but the regularity with which the toy appeared on auction sites throughout 2005 suggests it was quite a few.
A redeco (or should that be de-deco?) of the Grand Convoy Super Mode Pla-Kit, Grand Convoy Super Mode White Version was available exclusively on July 17th and 18th at the Japanese convention, Kodansha Super Chara Festival 2004 ("K-Fest"). It is a solid white version of the normal model kit, possessing all the features of the normal figure, which was intended to be used in a customization/painting contest held at the convention. It lacks the comic of the normal release.
Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.
In a world where the Transformers' war settled into a series of friendly competitive races known as the Transformers GT, Optimus Prime became the GT Transformer known as GT-R Prime. As a racer he was known for his serious but sometimes hot-blooded personality and his skillful use of the Impact Wrench Gun, though he maintained an honorable policy never to fire directly at an opposing racer's body. Like other racers, GT-R Prime put a limit on his own strength by separating his Matrix into a GT Sister, creating his partner Misaki.
First Edition Optimus Prime is, as his title suggests, the first toy available to the public from the Age of Extinction toy line. Prime is an all-new Leader Class-sized figure, featuring his new Western Star "5700 OP" concept truck vehicle mode and his updated robot mode from the film (well, mostly based on his initial design rather than the final design in the movie). His transformation is much simpler than his counterparts from the previous three movie lines, being billed as transforming in "15 easy steps." His torso, shoulders, upper legs, and the vehicle mode grill are all completely chrome with the exception of minor blue and red details painted on his chest. However, this comes at the expense of his smokestacks and wheels being bare gray plastic, whereas they are chromed in the film. His simplified transformation also comes at the expense of having a very bulky "backpack" of kibble composed of the rear of the truck cab and the fuel tanks, limiting his shoulder and hip articulation. However, his Truck kibble can be detached from the main figure to form the majority of his vehicle mode on its own.
This. Is. Awesome. I remember running LEGO piece auctions ~1998/99 on RTL (rec.toys.lego) then later my own website. I’d buy sets at Walmart and other places on discount, break them out, and sell the pieces as lots. I knew I’d always make good money if I could average < $0.10/piece cost (ideally around $0.07) and sell for $0.15 – $0.20+ … fun times!
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
In the animated series, Optimus Prime was originally in the Autobot Academy and friends with Sentinel Prime and Elita One. When Elita is lost on a planet dominated by giant spider-like aliens, he blames himself for leaving her behind, where she supposedly dies in the explosion of a wrecked Decepticon warship loaded with Energon. Sentinel doesn't forgive him for losing her and Optimus takes full responsibly for Elita's demise. Ultra Magnus, who had high hopes for him, expels him and thus bars him from any position of the Elite Guard. However, Magnus pulls some strings so that Optimus could be captain of a strange Space Bridge repair crew composed of an old grumbler of a war vet named Ratchet, a fledgling Bumblebee, and his fellow cadet, Bulkhead. Optimus is given command of the starship Omega Supreme.
Released as part of the Single Pack assortment, Optimus Prime is a show-accurate, non-transforming die-cast vehicle based on his alternate mode. He features through-axle construction, allowing for super-speedy racing on smooth surfaces, and his car mode is compatible with many tracks and playsets from Hot Wheels and Matchbox. He features 4 wheels, as opposed to the Legion Class' 6 wheels & his larger toy's 10 wheels. Optimus Prime also comes with a collector's flyer.
That’s actually a very big part, but I’d go lower than the $10 sets. The little tiny box sets with one minifig and some small vehicle or accessory that were $1-4 when I was growing up in the 80s now seem to be anywhere from $5 to $12 on the shelves. The cheapest of those are the sets that you could buy as a casual gift with pocket change in the 80s. Related to that, I’d like to see a metric that tracked the bottom price (both sticker price and adjusted price) of sets each year.
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984 A.D., a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.

Based on Optimus Prime's Cybertronian form as seen in the Dreamwave comic book "The War Within", this version of Prime transforms into Cybertronian truck. The figure was personally designed by comic artist Don Figueroa, who created the original comic design in the first place, and his signature is left on the figure in the most literal way: the word "DON" can be seen sculpted into the barrel of his silver ion blaster.


This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
Although he was weak and low on energon, Prime made a last-ditch effort to save the day when he rammed through the wall of Megatron's energon-producing lab. G.I. Joe vs. the Transformers #5 After a quick recharge, Optimus single-handedly smashed the Decepticons, pounded Megatron to the ground, and ripped his fusion cannon off his arm. Prime then teamed up with the Joes and used Megatron's cannon to shoot down the SPS Satellite that had gone rogue and was destroying the island.
Transformers Siege Greenlight will be released sooner than later, especially compared to exclusives from previous years. We have our first preorder up on Amazon.ca revealing two important points: who the exclusive retailer is and what the price point will be. Now we know that it will be an Amazon exclusive. While we only know for sure that this will be the case in Canada, it stands to reason that it will be an Amazon exclusive elsewhere to, which is great news since those are always the - Read More
Available exclusively from Japanese 7-11 stores, MP-711 is an Ultra Magnus-decoed Convoy—white with green and blue highlighting—themed with 7-Eleven logos. Unlike most MP-10 redecos, he comes with a trailer, Roller, and Spike figure, who is sporting a 7-Eleven uniform. Roller and the combat deck come with 7-Eleven logos, however Convoy's shoulder logos are stickers with the option of a green 7-Eleven logo or the standard Autobot logo on either shoulder.
A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.
In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
In one possible scenario, Optimus was surprised to see Beachcomber return to Autobot headquarters soon after his departure. Beachcomber informed Optimus that he had uncovered the Decepticon's newest hidden fortress, and he suspected that the Decepticons were up to something big. Optimus sent out Beachcomber once more, this time along with Powerglide and Windcharger to investigate the Decepticons' plot further.
At about 2/3 the size of the Smallest Transforming Transformers, this diminutive version of the original Generation 1 Optimus Prime toy is the smallest figure of the Autobot leader made to date. It was sold as part of Takara's blindpacked Mini Toy Shop Collection line, a series of miniaturized figures from numerous classic Takara toylines, including Transformers, Microman, Licca-chan, Choro-Q and others. Both of Prime's modes are represented by non-transforming individual figures, which come together in a two-pack. In-box, his truck form is even packed in a miniature recreation of his original Japanese packaging, which also includes a shrunken version of his sticker sheet. A tiny version of the original Takara Transformers catalog completes the set.
×