In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt, but due to the aforementioned lessened complexity significant sacrifices had to be made, such as "cheats" to the transformation sequence, to achieve this and thus he is overall less accurate than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. However, he maintains a superb level of articulation and posability.

The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".


Rodimus Prime/Minor is a character who appeared in season 3 of the Transformers Animated series. He is a homage to the Generation 1 version of the character Hot Rod.[17] He wields an energon bow-and-arrow weapon of his own design.[18] On March 31, 2009, Derrick J. Wyatt, lead Transformers Animated Character Designer posted an image of Rodimus' vehicle mode, which is described as a futuristic muscle car that is mostly based on a 2008 Dodge Challenger with some elements of a 1969 Ferrari Daytona. This was revealed at the 2009 BotCon where Hasbro released an action figure of Rodimus Minor. It showed that the 2008 Dodge Challenger parts of Rodimus' vehicle mode were mostly based on the back, top, and sides of the vehicle, while the 1969 Ferrari Daytona parts were found in the front of the vehicle, most notably, the headlights.
Another redeco of Deluxe-Class Dark of the Moon Prime, this release uses a darker grey, a less magenta-y red, and less gold on the front end. Included is the trailer originally available with the Chronicle release. The trailer holds up to seven MechTech or similar 5mm peg accessories. Four holes are located on the top-front end of the trailer, with another three inside. The door also folds down to become a ramp, and the inside of the trailer is big enough for several Legion or Commander Cyberverse toys, or one smaller-end Deluxe figure. Two C joint bars also run along the bottom of both sides.

 • Optimus Prime  • Rodimus  • Ultra Magnus  • Alpha Trion  • Arcee  • Blaster  • Blurr  • Brawn/X-Brawn  • Bulkhead  • Bumblebee/Goldbug  • Cliffjumper  • Elita One  • Hoist  • Hot Shot  • Hound  • Ironhide  • Jazz  • Jetfire  • Kup  • Metroplex  • Mirage  • Omega Supreme  • Perceptor  • Powerglide  • Primus  • Prowl  • Ratchet  • Red Alert  • Sandstorm  • Smokescreen  • Seaspray  • Sentinel Prime  • Sideswipe  • Springer  • Wheeljack  • Wheelie  • Wreck-Gar


Walmart have uploaded a very nice commercial via their YouTube Channel that we are sure will please your optics. What is it about? This video features several famous and iconic cars like KITT from “Knight Rider”, Ecto-1 from “Ghostbusters”, Lightning McQueen from “Cars”, the Mystery Machine from “Scooby Doo” and even Fred Flintstone’s footmobile. As some of you should expect, our small yellow hero is present here in his Bumblebee Movie VW Beetle design, and with an impressive entrance emulating Ironhide’s jump from the 2007 live action movie.
"Special Edition" Optimus Prime is a redeco of the Classics multi-pack toy, featuring some minor paint detail changes, bluer translucent plastic, darker and cooler gray plastic, and darker metallic flake red and blue plastic, with his (previously black-only) rifle body most notably now being cast in both blue and black plastic. He came in special "book box" style packaging with black-and-white boxart, and was only available at retail in Australian and Asian markets. North American customers could later buy him via Hasbro Toy Shop.

A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.

When the long-lost Titan Masters reemerged into modern society and joined the Autobot-Decepticon war, Optimus Prime was partnered with the Titan Master Apex, who carried a portion of Prime's spark, boosting the legendary commander's already formidable abilities. Titans Return Apex/Powermaster Optimus Prime toy bio On Velocitron, Optimus Prime was present for the biggest race of the year when Scourge and Crashbash arrived and attempted to botnap Hyperfire. Optimus ordered Sentinel Prime and Hardhead to battle against them. Later, Optimus was part of a battle on Cybertron against Soundwave. During the battle, the Autobots' base Fortress Maximus transformed to thwart the Decepticon advance. Optimus Prime declared that to defeat the Decepticons, the Autobots would need to master the power of the Titan Masters. Titans Return: The Power of the Titan Masters


On the day before the Transformers GT began, GT-R Prime found himself racing with GT-R Saber when they were both out for a test run. Though Misaki warned him not to get too invested in a practice race, Prime took the challenge seriously and won the race by briefly transforming into robot mode, thus tricking Saber into slowing down in anticipation of a fight. Test Run Battle! –Prelude– Prime earned the pole position for the Transformers GT, but this combined with his victory over Saber made him overconfident, and he was unprepared when Saber attacked him immediately as the race began and sent him flying. First Fast Attack! –Whoever Strikes First Wins– GT-R Megatron also targeted Prime during the course of the race, seeing him as his fated rival. One Shot and One Kill!! –Finishing Blow–


Having been removed from toy store shelves after 1985, Optimus Prime was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie premiering that year. He cost $21.50 and 5 Robot Points. He was also offered in 'The Autobots Have A Special Mission For...' mail-away pamphlet and came with a special "Movie Edition Certificate" and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)

Super class Energon Optimus Prime transforms into a Cybertronic short-nosed truck cab. A switch on his back offers four selectable sound effects, each one corresponding to one member of the Prime Force, the four drone vehicles contained within Prime's parallelogram-shaped trailer. A tiny, slightly recessed button above the switch activates the sounds. When Prime transforms to robot mode, the trailer stands upright to become a launch base of sorts for the Prime Force, with three of the trailer's four storage compartments featuring launching mechanisms that propel the vehicles into action. The Prime Force consists of Fire-1, a fire truck with an extending ladder and rotating turret; Copter-2, a helicopter with spinning rotors; Digger-3, a drill tank with a gear-wheel-activated spinning drill; and Submarine-4, a submarine with opening capture claws beneath its bow. The four interchangeable drones can combine with Prime to create his Super Mode; any drone is capable of forming any limb. When in Super Mode, Prime's chest panels are opened, in turn pressing a button on his side that creates more electronic sounds and lights up a red LED in his chest, representing the Spark of Combination.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
Transformers: War for Cybertron was released in June 2010 for the PlayStation 3, Xbox 360, and Nintendo DS. The game takes on Cybertron during the Great War between the Autobots, led first by Zeta Prime and then Optimus Prime, and the Decepticons, led by Megatron. Transformers: Cybertron Adventures was released alongside War For Cybertron for the Wii and utilizes the same characters and setting.

The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.
Bumblebee, being the popular character he is, was one of the first five characters inducted into the Hall in 2010, during a ceremony at BotCon; the convention for all things Transformers. He was joined, not surprisingly, by other super-popular transformers: Optimus Prime, Megatron, Starscream, and the Dinobots. Humans enshrined in the Transformers Hall of Fame over the last few years include everyone from director Michael Bay to Peter Cullen (the iconic voice of Optimus).
This Japanese-exclusive vacuum metalized golden redeco of Super Base Optimus Prime, whose name means "Shining Golden", was available as a prize in several draws, including a colouring contest held in the pages of TV Boy magazine, and in-store lottery draws at Tobu Department Stores. Between the draws, at least 58 "Kinpika" Prime toys are known to have been given away, making it one of the more widely available Lucky Draw figures, comparatively speaking. It came packaged in a plain white box, and including all the accessories and features of the standard release of the figure, including a gold-chromed Sparkplug (or "Prime", as he's confusingly known in Japan).
Optimus & Shreddicus were initially exclusive to San Diego Comic-Con 2017, where they sold out. A small portion of the run had been held for future sales: Hasbro Toy Shop put the set up for sale for about five minutes on August 14 before selling out. The remainder was available at HasCon 2017's exclusives booth, but again they burned through the stock very quickly.
© 2019 Hasbro.com All rights reserved. All audio, visual and textual content on this site (including all names, characters, images, trademarks and logos) are protected by trademark, copyrights and other Intellectual Property rights owned by Hasbro or its subsidiaries, licensors, licensees, suppliers and accounts. By using this site, you agree to the Terms and Conditions of Use.
The second known version [17] ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
I you can get an official reissue for around the same price, do it. I lucked out and got an opened but mint Encore for $50 last week but you'll be getting lucky that way. All Hasbro reissues have short smokestacks and long stacks are harder to get separate to swap out. Average price for a Japanese reissue is around $100 opened. If you are on a budget and the kid doens't care about slight issues, the $40 KO would be the better option.
A redeco of the Dark of the Moon Deluxe Class toy, this Optimus Prime has large portions of his body, mostly his truck parts, vacuum metallized silver, and his light-piped eyes were neutered by blue paint. He comes with a redeco of Generation 1 Rampage's sword, which can be wield by his 5mm-compatible hands (Although not shown in the instructions). As his body, legs, and front truck kibble were chromed, care must be taken while transforming, especially with the shoulder kibble & the bottom leg's posts (This can be amended if you slightly widen the holes with 3mm hand drills). As with the original Dark of the Moon Deluxe Class figure, the instructions did not mention about forming the sleeper part until step 10, the pinky finger prevented the sword to peg down through his hands, and of course: his truck mode can attach with the Armored Weapons Platform included in the Chronicle or the Movie Trilogy Series figure. This figure has slightly loose shoulder joints.
Though Prime's ultimate fate is unknown, in a story entitled "The Last Days of Optimus Prime", also from Transforce, Prime laments the new Transformers age without war and passes on to a Transformers afterlife, referred to as "J'nwan". The story is vague, however, and may be a metaphor for Prime rejoining the Matrix, as his time had come. In this realm, he was approached by the Predacon Sandstorm, who tried to plead for the help of Prime and the other legendary Transformers in dealing with a Unicron/Predacon hybrid named Shokaract. Prime refused, but later led a group of Transformers, including Megatron, Grimlock, and Soundwave), to distract the creature while Primus dealt the final blow.
The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.

Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster, a Barrage cannon, two retractable energon blades that extend from his forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, and two retractable energon hooks that extend from his wrists. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.


Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.
This is a new line which features robot versions of various Marvel Comics superheroes (and later more of the Star Wars Transformers figures once it merged with this line). Confirmed figures are Iron Man, Spider-Man, Wolverine, Venom and Hulk. Hulk turns into a tank while Iron Man turns into a jet. Spider-Man becomes a helicopter, Wolverine turns into a 4WD, Venom turns into a turbocharged retro car. They are not to be confused with the Marvel Megamorphs toy line, which also featured transformable mecha piloted by the superheroes. Eventually, the Star Wars Transformers figure joined the line with reissues of previous figures, as well as all new molds.
Hot Rod appears in All Hail Megatron , while traveling through space by himself, he found himself under attack by the Torment, a Decepticon warship crewed by Bludgeon and the Pretender Monsters. He was shot down, but managed to transmit a distress call to the Autobot starship Trion, which came to his rescue. After the Decepticons were chased off, Hot Rod joined the crew of the Trion. When the Decepticons' galaxy-wide assault hit, the Trion was shot down over Cybertron. Hot Rod sent out a distress signal and was ecstatic when he ran into some other Autobots. Hot Rod was taken back to base and relayed the story of how he and his other crew-mates from the Trion arrived on Cybertron, having been diverted there by Decepticon ships and forced to crash land. Once on the surface, Hot Rod sent out his distress signal and was so sure someone heard it. Kup arrived with the rest of the Trion's crew at that point, just in time to tell Hot Rod of course no one heard his message. After the Autobots narrowly avoided the Insecticon swarm and Sunstreaker sacrificed himself, Hot Rod jumped to Drift's defense when he was being insulted by Bumblebee. When the Autobots were later rescued by Omega Supreme, Hot Rod was glad that he sent out the distress call. He was then ferried to Earth with the other Autobots aboard Omega.
The 1986 line featured another significant change in that many, if not the majority, of the toys were conceived as futuristic vehicles and bore little resemblance to present-day machinery. This was due to changes in the movie and television series, which leaped ahead twenty years to the year 2005. Many have speculated that this change might have been what signaled the beginning of the end for the Transformers, as part of the novelty of the first lines was the realistic vehicles that turned into robots.
A redeco of of the Cyber Commander toy above, this Prime features grey plastic replacing the original blue, some deco differences on the arms, body & legs. He also features a flame tampograph on the sides of his vehicle front. He comes in an altered packaging that replaces the first version's painted prototype stock photos with CG renders depicting the new deco, and also features a new Hasbro product code number, thus making him officially a separate product rather than a drastic running change variant.

Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…


In the "Transformers" film, the robots had more of an alien feel to them to fit the theme of an alien invasion. The robots (stated by Optimus Prime) in the film are actual sentient organisms and not just giant, mindless, and mechanical machines. The robots can also speak their own alien language sounding like what seems to be based on different pitches and frequencies. Alongside that, they gave them more alien features that probably wasn't mentioned in the comics or T.V. series such as a highly advanced exoskeleton, force field, and a special "alien meteoroid" mode which they transform into individually and arrive on earth in. The exoskeleton is a "self-regenerating metal" in which the aliens are composed of (stated in the film) that is the equivalent of living skin that heals itself.
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Gary Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.
Following a battle which left him grievously wounded, Optimus Prime's entire structural integrity and circuitry processors were reprogrammed into a sleeker, stronger, combat-ready configuration. With a new giant laser-targeting rocket launcher, ripple-fire missile blaster and armor-piercing discs, Optimus was ready to immobilize Megatron once and for all.
From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.
If you're still on the fence about Masterpiece MPM-5 Decepticon Barricade, or are considering purchasing Masterpiece MPM-6 Ironhide (which is also currently available), now might be a great chance to grab this Amazon.com exclusive figure from Hasbro. As of this writing, MPM-5 Barricade is currently on sale at Amazon.com for $52.13, which is 35% off the regular retail price of $79.99. Part of the special deal is that he's also available for "FREE" One-Day shipping for Amazon Prime members. Order - Read More
However, the situation was still so desperate that Optimus not only decided to recruit human allies The battle is far from over!, but aggressively tried to recruit and deputise human children, including giving them the power to co-ordinate Autobot teams in battles. He wouldn't even make a final move on the Decepticons until he had enough child soldiers on his side. Earthlings: THE S.T.A.R.S. need your help now! Have the Decepticons defeated us once and for all? In at least one case, this likely led to the death of a small boy at Decepticon hands. Can one boy, alone, hold back the evil Decepticons?
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.

Part of the seventh wave of Robots in Disguise Warrior class lineup, and the first of the Mini-Con Weaponizers subline, Power Surge Optimus Prime is a retool of the original Warrior Class Optimus Prime figure, now transforming into a 6-wheeled futuristic trailer truck. Optimus now also comes with a pair of swords, which can be attached to his 5mm-compatible hands or the top of the truck/back port to serve as the robot's wings. Most notably, Power Surge Optimus Prime features retooled truck hood/shoulder parts to makes the hands more evident. As a retool of the original Warrior Class Optimus Prime toy, he retains his axe accessory, albeit unpainted just like the Clash of the Transformers Warrior Class toy's. His light blue-colored Launcher can be attached onto his collar.


This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original Generation 1 figure release. While his cab robot retained his original red and blue color scheme, his trailer was recast in black, with the original blue and silver striped sticker replaced with a red and silver one displaying Optimus's name. On the first release of the trailer, the internal components and Roller matched the blue of the cab robot. Later, the internal components were changed to a lighter blue, as was Roller. Another running change followed, making the dark blue of the cab robot match this lighter shade. A bright yellow "Autobot" tampograph was also added to the back of his right leg.
With the Japanese Binaltech toy series having transformed into the Kiss Players line, the second figure to be released as a Kiss Players character was Hot Rodimus. Based on the same Ford GT mold as Mirage, Hot Rodimus features several differences from Mirage. First, it has a unique head sculpt, which includes a movable crest to allow a "visor" to be lowered over his eyes, referencing a scene from the animated Transformers Movie during which Hot Rod is on Lookout Mountain. Additionally, it includes a fishing-rod accessory, which can be split and connected in a different configuration to create a tri-barreled arm weapon, reminiscent of Hot Rod's exhaust-pipe blasters. The figure also includes a PVC figurine named Syao Syao and a CD featuring a Kiss Players radio drama. The vehicle mode stays true to the Ford GT's factory color scheme, lacking Hot Rod's signature "flame" detailing, and, like Binaltech, is fully painted. Meanwhile, the robot mode reveals additional orange and yellow body parts, such as the chest, abdomen, arms and hands, as well as flame-like paint applications on the lower arms to link the figure with the original Hot Rod.
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening
Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
This Wal*Mart-exclusive two-pack pairs the deluxe-size Classics Optimus Prime figure with live-action movie line's Fast Action Battlers Power Hook Optimus Prime toy. Both toys are identical to their original releases, and together represent the Optimus Primes of the oldest and newest generations (at the time) of Transformers, respectively. The movie Prime is designated "2007 Optimus Prime", while the Classics figure is dubbed "1984 Optimus Prime" (referring not, of course, to the toy, which was produced in 2006, but to the character).
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
Optimus Prime comes with many accessories in addition to the aforementioned Matrix, including the character's traditional laser rifle, now termed (and henceforth known as) an ion blaster. The initial release of the figure cast the ion blaster in grey plastic, but later assortments recast it in its more familiar black coloration. Other accessories include a transparent orange energon-axe that plugs into either wrist when Prime's fist is retracted, and even a non-transforming gun mode Megatron weapon, with removable stock, silencer and scope accessories, in homage to several instances in the Generation 1 cartoon when Prime was forced to wield his enemy. Pack-in bonuses that came with the figure included an inner cardboard tray illustrated to resemble the interior of Prime's Combat Deck, and in later releases, a small poster drawn by Pat Lee.
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.

Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
×