The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.

Like Chomp & Stomp Grimlock, his truck kibble from the back can accommodate One-Steps and Power Battlers (Both Hasbro and TakaraTomy), activating his various voice clips and flashing lights by interacting with the magnets in their feet. He is notably less kibbly than other AOE Optimus Primes...from the front, at least. The back and sides are not so promising with large chunks of Western Star truck kibble hanging off his legs, making him look as if he's wearing a petticoat. At least the jetpack helps balance the whole thing out....


In 2007, the Optimus Prime of universal stream Primax 109.0 Beta encountered a mysterious messenger from another world: another incarnation of himself from a parallel dimension who left him with a warning. Two years hence, Megatron would bring the terrifying super-dimensional lifeform known as the "Beast of Time", the Hytherion, into their dimension to destroy Earth. The only thing that could battle the Hytherion was the power of the super-evolved multi-dimensional race of Cybertronians known as the Alternity. Prime agreed that when the danger appeared, he would join the Alternity in the fight.
This mold was redecoed into Universe Optimus Primal and Beast Wars Telemocha Series DX Convoy, and retooled into Beast Wars Reborn/Beast Wars Tenth Anniversary versus pack Optimus Primal. Takara also created multiple special variants, including all-gold (from Tele-V Magazine, only ten awarded), red and gray (Tele-V again, but only one awarded), and blue-fur (a Comics Bom Bom design-contest prize, only five awarded).
In "Human Error" Parts 1 and 2, Soundwave captures the Autobots with the help of his minions, Laserbeak and Ratbat, in order to brainwash them. Part of Soundwave's elaborate scheme consists of tricking the Autobots into thinking they have turned human. Optimus Prime's human form is a male caucasian in his early 20s wearing a red jacket. Sari forms a group of "Substitute Autobots" which consists of Scrapper, Wreck-Gar, and Snarl, to rescue them. They free the Autobots from Soundwave's control and Optimus grabbes Laserbeak to engage in a guitar vs. keytar battle with Soundwave, who used Ratbat. Optimus smashes Soundwave and Ratbat into pieces using Laserbeak in guitar mode, but Laserbeak grabs Soundwave's surviving components and flees.
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
Hot Rod only appeared three more times: once when he gave the Matrix to a Quintesson-controlled Optimus Prime. When he lost the Matrix, Rodimus was forced to face down his fears once and for all when the Decepticons began a series of attacks on Japan. Overwhelmed by the different responsibilities and directions he was being pulled in, Rodimus went joyriding and was attacked by the Stunticons Dead End and Wildrider, losing the Matrix in the ensuing crash, which was acquired by the Scourge, one of Galvatron's minions, the Decepticons' tracker and leader of the Sweeps. While Rodimus became Hot Rod again – and was not eager to change back – Scourge was warped and enhanced by the Matrix and led another attack on Japan. Counseled by a martial arts master on giri – the burden hardest to bear – Rodimus realized that the Matrix was his burden, and that he had been chosen to bear it; battling Scourge, he recovered the Matrix and resumed his role as leader, and finally when Optimus Prime was resurrected, Rodimus Prime was able to return to being Hot Rod for good. In all three occasions, his return to Hot Rod took place because he lost or passed the Matrix to someone else.
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)

Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
Available exclusively from Japanese clothing company A Bathing Ape in 2015, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique deep red color scheme matching the Convoy Reissue BAPE Ver. RED of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
Optimus and Prowl received message from Skyfire of a coal transport in Africa, and discovered Megatron was using human slaves. Megatron detonated his coal mines with the world's largest explosion, killing the humans and forging the world's largest diamond — that he would use to as a lens for a satellite to focus the Sun's beams, melting the Rocky Mountains! Prime ordered Skyfire to attack the satellite, and Ratchet to build a square mile panel of metal to deflect the beam, blowing the satellite up. Satellite of Doom The Decepticons attempted to drain the Prudhoe Bay oil reservoir, causing volcanic eruptions and Russia to approach America, accelerating tensions between the countries. Optimus ordered razon gas to be pumped into the reservoir, returning the oil below and raising the Decepticons' aquatic drill. When Continents Collide
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.
Mission Racer Optimus Prime features a pull-back gimmick by using a rubber band: insert the rubber band onto the front and rear post, then place Optimus Prime onto the ramp and pull his trailer backwards, and release the trailer for allowing the truck to zoom forward. The rubber band also has Optimus Prime's name and the Autobot insignia tampographed oh it.
Very well written piece. It is very expensive, but as seems to be the trend on here, I would agree you are paying for the quality with LEGO. I like that they have provided the opportunity for adults to build sets with the LEGO Modular buildings range, those sets use real architectural techniques in their construction and are really quite impressive.
Optimus was challenged to a duel by Megatron as a distraction while the Constructicons attempted to strike against Teletraan I. Heavy Metal War - Part 1 Concerned that the Decepticons might try to steal a new Energon related technology from a science facility, Optimus sent Blaster to infiltrate and protect the base. Espionage Optimus was impressed with Grapple and Hoist's plans for a Solar Power Tower, but thought it would be too difficult to defend from the Decepticons. The Master Builders Following the return of the Aerialbots from a trip to Cybertron, they told Optimus and Elita One about how they'd encountered Orion Pax and Ariel. Golden Age Optimus was among the Autobots affected after Megatron sabotaged their recharging chamber. Turned evil, Optimus was sent to attack Rutter Military Base and obtain a solar power satellite. He and the other Autobots were returned to normal by Sparkplug's attitude exchanger, and Optimus promised to repair the base. Attack of the Autobots
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
Another release of the Leader Class Optimus Prime figure, now redecoed from the original Revenge of the Fallen Leader Class mold, but with the gimmick-less arms from the Supreme Class retool, and a pair of articulated fingers which was not previously used for the original release. He also retains his pair of Energon Swords and Hooks, and his Knuckle piece. He also retains the fuel tanks that can combine to form his ion blaster. In terms of deco, he features a darker plastic color and paint (which resulted in a two-tone shades of silver & gunmetal), which is meant to go with this line's Jetfire.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.
Prime's body was entombed in a massive deep-space mausoleum with the many other fallen Autobots. In 2006, his grave was desecrated and his body reanimated by Quintessons in an attempt to destroy the Autobots by using Prime to lure their space fleet into a trap. The Matrix was able to purify Prime of the Quintesson influence, and he ordered the other Autobots to clear out while he piloted his flagship into the Quintessons' detonator, triggering the explosion of a nearby sun. Prime was supposedly destroyed in the explosion. According to "The Return of Optimus Prime", Prime's body was recovered from the craft by two human scientists, Jessica Morgan and Gregory Swofford, just minutes before the explosion. As their ship departed, it was coated with solar spores, which induce rage and madness in any sentient being they came into contact with, released by the explosion of the sun. Jessica's father, Mark Morgan, loathed all Transformers, and his hatred only grew when an attempt by the Decepticons to steal a heat-resistant alloy he had developed resulted in Jessica being paralyzed. Swofford and Morgan reconstructed Optimus Prime's body, planning to use it as a delivery system for the spores in order to destroy the Transformers.
While stock photos and renders show the figure with a faceplate, this image posted by the Transformers Facebook page shows him with his mouth exposed. This was later found as a variant at least once. A running change was made, changing the blades to be more translucent. The semi-translucent blades release features a date code "73461", whereas the translucent orange blades version features a date code written as "80171".
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)
But around the mid-’90s, Hasbro let the trademark for a toy named “Bumblebee” lapse. At that point, the Generation 1 Transformers were almost passé, as they focused on the newfangled Beast Wars and Beast Machines lines. In fact the Unicron Trilogy continuity (mid-2000s) character called Hot Shot was originally going to be called Bumblebee, and in fact had a lot of Bee’s personality traits and yellow color, until they realized they couldn’t use the name. Fortunately, they got it back soon after.
The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.
Legends Class Optimus Prime is based on his original Generation 1 appearance. He features a fake grill for his robot mode, and his large legs result in a fairly thick and compact truck bed. He is part of "Reveal the Shield", a subline that outfits all its toys with rubsigns, and in this case, it's located on the left side of the truck/his left elbow.
If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.
ROBOTKINGDOM.COM Newsletter #1462 Hi, Here is a quick update from www.robotkingdom.com.  #1 Hot Items! Flame Toys : Transformers Star Saber. Preorder. Available in May 2019. US359.90 http://www.robotkingdom.com/ftstarsaber.html Flame Toys [Furai Model] - Bumble Bee. Preorder. Available in May 2019. US44.90 http://www.robotkingdom.com/4897054512308.html Takara Transformers Masterpiece MP-34 Masterpiece - Read More

This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.

This golden chromed redeco of the Super class Optimus Prime figure was initially offered as a prize to five lucky winners of a colouring contest held in the pages of the TV Magazine. Additional units were later given away via in-store draws at Toys"R"Us Japan; precisely how many is unknown, but the regularity with which the toy appeared on auction sites throughout 2005 suggests it was quite a few.
Adventure Lucky Draw Optimus Prime is a gold vacuum metalized redeco of the original Warrior Class figure (save for some of his unpaintable thighs & upper shoulders) released as a prize for the Transformers Adventure prize draw campaign held between 25 July 2015 and 30 September 2015. To obtain it, entrants needed to send in four robot points clipped from the packaging of Transformers Adventure products.
In a world where the Transformers' war settled into a series of friendly competitive races known as the Transformers GT, Optimus Prime became the GT Transformer known as GT-R Prime. As a racer he was known for his serious but sometimes hot-blooded personality and his skillful use of the Impact Wrench Gun, though he maintained an honorable policy never to fire directly at an opposing racer's body. Like other racers, GT-R Prime put a limit on his own strength by separating his Matrix into a GT Sister, creating his partner Misaki.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.

This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.

Hot Rod would make his first IDW Publishing appearance in a Spotlight issue focusing on him. In this, he was shown to be newly promoted to command of a group of Autobots including Gizmo, Backbeat and Dealer, who had been sent to secure the Magnificence, a device of some sort that could predict the future. Getting past the guardians, Hot Rod was swapping it with a fake to prevent the Decepticons from getting their hands on it when a seeming Decepticon ambush wiped out his squad. Determined to rescue the only survivor, Dealer, Hot Rod staged a daring solo rescue mission that managed to rescue Dealer - unaware that he was really Doubledealer, a Decepticon spy sent by Banzaitron to retrieve the Magnificence and now out to find where Hot Rod had stashed it.[10]
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
In the Japanese exclusive Transformers: The Headmasters storyline (which replaced the "Rebirth" finale in Japanese continuity), Hot Rod appeared as part of Optimus Prime's inner circle. When Galvatron and his Headmaster warriors launched a devastating attack on Cybertron, Vector Sigma was damaged, and Hot Rod was sent to Earth to retrieve the Matrix. Recovering it, he returned it to Prime, only to be surprised when the ghost of Alpha Trion once again reformatted him into Rodimus Prime to help Optimus. After Prime's second death, Rodimus once again took command of the Autobots. However, when Scorponok destroyed Vector Sigma, Rodimus decided to leave the war, and left Fortress Maximus in command of the Autobots.
Released as part of the Bumblebee Energon Igniter's Speed Series line, this Optimus is a Legends/Legion-sized mold that transforms from robot into a Cab-over truck with the transformation scheme shared with the Transformers (2010) Reveal The Shield Legends Class toy, and he features 3mm compatible hands. Optimus' truck mode can also be attached with the Energon Igniters core, and due to the toy being lightweight, it can propel his vehicle mode forward very quickly, making him a fast-moving truck. Due to its simplified transformation, Optimus' robot shoulder parts ended up sticking out from his truck mode, and his upper cabin panel ends up being integrated with his head. Unlike most Speed Series toys, his Energon Igniter port is ends up under his right foot in robot mode rather than on his knee.
If he didn't send Sludge with them, the odds were 2 to 1 that the Autobots would all be destroyed as part of Operation Black Coral. The one possible positive outcome ended with Optimus fighting a duel against Megatron atop Mount Lomas in which Prime (somehow) split into his three components to surround his archenemy. This provoked Rumble into "assisting" his leader with an earthquake that destroyed the Decepticons' entire superfuel operation.
Tomica Optimus Prime is a die-cast non-transforming toy of his truck mode from Prime. It was sold as part of the "Dream Tomica Series", a subline featuring exclusively fictional vehicles. Like all Tomica toys & all Generation 2 GoBots and Spychangers, Optimus Prime features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces. However, they do not convert into robot mode.
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
Available only at KB Toys, Machine Wars Optimus Prime is a redeco and slight retool of the European Generation 1 exclusive Turbomaster leader Thunder Clash, transforming into a Cybertronic truck cab. It's easy to see why Thunder Clash was chosen to become the new Optimus Prime, given his adherence to Prime tradition: the cab disconnects to become the robot, while the trailer unfolds to become an assault tower with twin missile launchers. On the original Thunder Clash version of the mold, the launchers operated on a gravity-feed system that saw a new missile drop into the launcher from above each time one was fired, allowing for twelve to be fired in rapid succession, but for Machine Wars Prime, this feature had to be dialed back for safety reasons. The missiles had to be lengthened to prevent choking hazards, and so the toy's launchers were modified to accommodate them, becoming straightforward spring-loaded single-firing weapons.

Although Rodimus plays the part of the brash youth, he is actually very intelligent, and has no loyalty to Optimus Prime; only his own personal gain. According to his biography, Rodimus used to be leader of the Wreckers, a mercenary group hired by Optimus Prime; but after the deaths of the other members, he joined the Autobot Seekers under the command of Goldbug.
In the first nexus, when Swoop reported back to Autobot HQ that the other Dinobots were being controlled by Bombshell's cerebro-shells, Optimus had to decide whether to stop them with an immediate full-scale assault, or consult the Ark's computer. If he led an immediate attack, the cerebro-shells were jolted loose when his troops carried out his order to, "Bring them down fast and hard". If he consulted the computer, he then had to choose between its plan to have Windcharger remove the shells from a distance with his magnetic powers, or go with Mirage's idea to lure the Dinobots over Bandit's Bluff with an Optimus Prime hologram. If he chose Mirage's plan, the Dinobots charged over the cliff and into the ocean, where they were salvaged for repairs back at base. If he let Windcharger lead operations at the bluff so he could confer with Skids about some strange activity near Dolphin's Bay, it was out of his hands whether Windcharger accidentally tore the Dinobots to bits, or harmlessly removed the cerebro-shells. The latter outcome led to Grimlock telling Optimus that Bombshell said controlling them was just part of a larger plan, and the Autobot leader realized that it might tie in to Skids's report. Skids and Bumblebee could investigate in Wheeljack's new mini-sub, but should he send Sludge along with them?
At BotCon 2005, Hideaki Yoke revealed that Optimus Prime (or more accurately, Diaclone Battle Convoy) was not designed by a single person, but rather a team of Takara designers as the one who was originally assigned the job had fallen behind. It is said that a young Shoji Kawamori was also a member of this team at some point, who would design THS-02 Convoy over 20 years later. The patent for the toy, however, lists Hiroyuki Obara as the designer.

The figure features newly redesigned hip ratchets to make both robot and combiner mode stable, which were also installed in both TakaraTomy's Motormaster, Grand Scourge, and a revision wave of Hasbro's Motormaster. The pegs that Legends Class Rodimus (or Blackjack) attach to have also been slightly modified to provide a tighter fit, making the latter toy much less prone to falling out.


Labeled as a "Triple Changer", Striker Optimus is a redeco and retool of Dark of the Moon Supreme Class Jetwing Optimus Prime, with new weapons. The base figure has most of the same mold changes as Jetwing Optimus Prime (see below), but has been altered further; in particular, the transforming smokestacks and fuel tanks/ion blaster parts have been replaced with retooled regular tanks that now function as mounts for the new accessories. The colors on the toy are darker than Jetwing Optimus, with a different flame deco that extends farther along the sides of the toy. Additionally, two new 5mm holes have been added to the gray hinge behind the cab in order to accommodate the Toys R Us Japan-exclusive battle blade accessories. The "I am Optimus Prime" saying of Buster Optimus Prime has also been replaced with the "We must stop the Decepticons!" saying of 2010 Transformers Optimus Prime, although batteries are not included.

In the animated series, Optimus is able to fire short-range optic blasts, project holographic maps, and deploy hydro-foils, designed by Wheeljack, to traverse bodies of water with ease. In the animated series, Optimus was also given the ability to retract his right hand unit and replace it with a glowing axe.[7] Across the assorted continuities of the original Transformers universe, there have been various interpretations of Optimus Prime. One of Prime's most notable characteristics over all continuities his unswaying commitment to leadership by example. The animated series's version of Optimus Prime is depicted as a straightforward, wise, and upbeat battlefield general. Additionally, the animated series's version of Optimus dislikes rap music, putting him at odds with music-loving characters like Blaster and Jazz. In the Marvel Comics series, in addition to these characteristics, Prime is secretly plagued by self-doubt and a conflicted sense of pacifism that often makes him an extremely reluctant warrior.
In "Mission Accomplished", Optimus is pressured by Sentinel to tell Ultra Magnus that his story about the Decepticons is untrue, but he refuses. Meanwhile, the on-board computer plots a train infused with a shard of the Allspark. When Ultra Magnus and Jazz set off there, Optimus suspects that the Decepticons are luring them into an ambush and rushes to their help, though Sentinel Prime tries to detain him. At first, Ultra Magnus doesn't believe him, but a short time later, Optimus is proven right as Starscream falls from the sky after being blasted by Megatron, much to Sentinel Prime's astonishment and fright. Starscream turns out to be alive, inflicting injury on Ultra Magnus. Optimus takes the affair into his own hands momentarily and, with Sentinel's aid, manages to apprehend the Decepticon. While Sentinel Prime deflects Starscream's shots with his power-shield, Optimus succeeds in taking Starscream by surprise and handcuffing him. When the shackled Starscream is delivered to the Elite Guard spaceship, Ultra Magnus admits Optimus Prime was right and allows him to stay on Earth in order to seek out the other fragments of the Allspark.

The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
×