A nice article but I see a few flaws. First of all if the distribution of LEGO sizes/prices is increasingly skewed it is better to either split the sample or look at medians or rolling medians than averages. Secondly, this is a perfect case to run a regression panel regression with time dummies to see both the impact of time and the impact of size on the prices.
Megatron is captured by the Autobot Targetmasters in the episode "Do Over". When Optimus learns Megatron has been captured, he rushes to be the one who kills his old enemy, despite the closing launch window of the Ark. When confronted by Optimus Prime, Megatron attempts to use the Autobot Targetmaster Nightstick to shoot the Autobot leader, but Nightstick takes control of Megatron's arm. Megatron then tricks Optimus into using Megatron's own sword to cut his hand off, freeing him from Nightstick. Optimus fails to kill his foe and misses the launching of the Ark, which has been taken over by Rodimus. He then takes out his anger on Blurr.
The "Breakout Battle" set includes another take on a screen-accurate "Scrapyard Optimus Prime", featuring a brown paint wash on tan plastic. The set was a shared exclusive between Toys "R" Us, online retailers such as Big Bad Toy Store, and Myer in Australia. The set was released in Australia, Singapore, and Canada but never actually made it to retail in the U.S. The set also includes Rollbar and a Vehicon.
This gold vacuum metallized version of Optimus Prime is a prize in Hasbro's Asia Age of Extinction campaign. To qualify for winning this toy, one must be the biggest spender of the day during the midnight launch of the AoE toyline at specific Toys R Us or participate in a lucky draw. This toy is limited to 7 pieces. 2 are in mainland China, while Hong Kong, Malaysia, Thailand, Singapore, Taiwan each have one.
The conclusion to the storyline was forestalled when Hasbro retracted 3H Enterprise's license, but an explanation can be found in issue 8 of the Transformers Collectors Club magazine, Cybertron/Robots in Disguise. In this issue, Prime tells the tale of how Unicron's forces were defeated in the last battle by Optimus Primal's forces and Unicron disappeared into the black hole opened in Transformers: Energon. Combined as Omega Prime, they could not escape fast enough, and were sucked into another dimension.
The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.
A special edition Bearbrick released in celebration of the Transformers 30th anniversary, Optimus Prime is a redeco of Bearbrick G1 Optimus Prime in a deco based on his Age of Extinction appearance. He transforms from a Bearbrick painted up like himself to a bear-eared robot and comes with no accessories, but holes in his robot mode hands can accommodate other toys' weapons.
You've got to love it when Amazon tries to be coy by sticking with code names while giving us a full look at the figure. That doesn't seem to be changing any time soon, the latest cases being our first look at stock photos of two Cyberverse Scouts on Amazon.com.au. This time around it's Ratchet under the name "Aces" and Shadow Striker under the name "Rockhounds". We got a look at these two in bot mode at New York Comic Con and later we got CG pictures, but this is our first look at both modes - Read More
In the war for Cybertron eons ago, Optimus was once Orion Pax, a historical archivist in the Iacon library. Throughout his studies on Cybertron's past, Orion became aware of the social inequality among Cybertron's populace. He became inspired by a gladiator taking the name of one of the thirteen original Primes, Megatronus. Megatronus attempted to start a revolution to overthrow Cybertron's current leadership and take the mantle of Prime. However, Orion preached a different ideology, declaring that violence is not the means to achieve justice, and thus, Megatronus changed his name to Megatron and severed ties with Orion, starting the Great War that destroyed Cybertron. Orion soon ventured into the core of Cybertron and was bestowed with the Matrix of Leadership by Primus, becoming Optimus Prime. After Cybertron became barren and lifeless, he and Megatron took their war to Earth, after which Megatron disappeared for three years. With Ratchet, Arcee, Bumblebee, Bulkhead, and Cliffjumper under his command, the Autobots were granted asylum on Earth by the US government if they kept the Decepticons at bay. However, in "Darkness Rising", the Decepticons return, killing Cliffjumper and target Jack, Raf, and Miko, three children who were seen with Arcee and Bumblebee. Optimus requested they be brought to base and know the full story, much to Arcee and Ratchet's dismay. Megatron returned soon after, wielding Dark Energon and nearly killing Optimus and Ratchet with a horde of reanimated Cybertronian corpses. Optimus later fought Megatron on the latter's space bridge, which Megatron intended to use to bring forth an army of undead to conquer Earth. Though Optimus is nearly killed by Megatron, he is able to gain the upper hand, and leaves Megatron to his apparent destruction when the Autobots destroy the space bridge. However, Optimus later confided in Ratchet that he still mourns Megatron's death, as he had a small glimmer of hope he could be turned to good. However, he does not underestimate Megatron's successor, Starscream.
On another plane of existence, Optimus travelled the path to the Matrix, guided by the voice of his old mentor Alpha Trion. The path led him to Grimlock, who had also been killed by Megatron; Prime rescued Grimlock from Kremzeek, the demonic eater of souls. At the gateway to the great beyond, they encountered Bludgeon, who announced that only those who bore the "key to Vector Stigmata" may pass through. Prime realized that the wounds on his body form the key, but the angel insisted that these would grant Prime access. Prime took Grimlock's sword and bestowed the key on Grimlock, allowing the former Autobot King to ascend into the Matrix while Prime stayed behind. Transformers vs. G.I. Joe #12
This release is a redeco of the Cyberverse Commander Optimus Prime figure, with a lighter gradient paint job that lacks the flames, and with Optimus sporting a G1 insignia. Instead of his jetpack and guns, he comes with his trailer/Armored Weapons Platform, which can transform into a base and exo-suit. The trailer itself features movie-style insignias.
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.
In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
My 6 year old son has recently gotten into the classic transformers. He has asked for an original Optimus Prime for Christmas. I can’t bring myself to spend the money on an original 1984 model, but would like to know if the reissues from China (sample in the link) are quality products. I’m not looking for a masterpiece, but i don’t want something that will fall apart within a month or so. Thanks in advance for the helpOptimus Prime
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).
Featuring a complex transformation, essentially the front and back ends of the truck fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his pricepoint has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, held in place by a simple clip.) Optimus' final Automorph, located in his torso, is activated by flipping the silver lever on his stomach activating a series of spring-loaded actions where the truck windows are pushed apart, and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
Based on his appearance in War for Cybertron, Generations Optimus Prime transforms from a red, blue, and silver robot into an "armored truck mode." He comes with a hand-held rifle that is held via either of its two 5mm posts, and can fold up to store in either mode. He features additional 5mm ports on his forearms, roof, and front-wheel panels. Optimus has a stylized sculpted Autobot insignia on his back, as seen in the game, but it is obscured by kibble.
During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
The Japanese release of Powermaster Optimus Prime actually represented a new character named Ginrai, and featured several retools: the cab featured die-cast metal, shortened smokestacks, vacuum-metalized plastic and clear blue windows, while the trailer was given retractable super robot fists. This Japanese version was eventually issued by Hasbro in 2003 as part of the Commemorative Series collection (see below).
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
Optimus appeared in the 2008 BotCon voice actor play "Bee in the City", voiced by David Kaye. In this story, Professor Sumdac attempts to create a teleportation system to get the Autobots to Cybertron, but an interaction with Sari's key ends up transporting Optimus Prime, Bumblebee, and Sari to Transtech Cybertron. There, they met Flareup and are detained by Shockwave. Bumblebee teams up with Beast Wars Megatron to free his comrades, but must then stop Megatron from taking the key for himself. Afterward, the Autobots and Sari returned to their own dimension.
As battles between numerous different Primes and Megatrons erupted quite literally all across time and space, another member of the Convoy Aggregate was later seen battling Starscream, who had been empowered by Megatron to serve as leader of his Questors. This Prime was so surprised by Starscream's uncharacteristic sports car alternate mode that he left himself open for a blast from Starscream's Retroactive Nullifer cannon, which erased him from the timestream. As he faded out of existence, Prime responded to Starscream's taunts about the death of the Alternity by telling him that they were already well aware of their prophesied end and were well prepared. Foreshadows
Available in a two pack set with Battle Changer Megatron, this Optimus is largely the same as as the single release, with some minor differences. He uses a new "double harness" piece on his torso instead of using two harnesses, leaving more space for his head to grip the neck-post. He also has different windshield decals, and his reds and blues are slightly darker. And, most obviously, he has an additional buildable trailer, though it doesn't really attach to the truck mode in any meaningful way.
The largest Action Master set, this incarnation of Optimus Prime is a non-transforming action figure which comes with the "Armored Convoy", a large, heavily armed tractor trailer. The cab of the truck transforms into a small jet that can seat one Action Master figure, while the trailer itself converts into a larger battle station with turrets that several Action Masters can man. The sculpt of the Prime figure itself is closely based on his character model, albeit with a coloration that seems to have been based at least partially on the small robot form of his Powermaster body.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.
Prime would make one further surprise appearance in Dreamwave's Transformers: Armada series. With Optimus Prime having disappeared to an alternate dimension, devastated by Unicron, the Autobots attempted to find their leader. As Jetfire attempted to locate him through Spacebridge links to other dimensions, one of these clearly shows RiD Optimus Prime and Prowl.
What I find more interesting is who’s in this wave. Not only is there Hot Rod and Barricade in ’80s muscle car form, but Optimus Prime in his red G1 Peterbilt truck form (just with movie Optimus’ head! Maybe Bumblebee will explain the origin of his “rip off everyone’s face” fetish). Two versions of Bumblebee round out the wave, his traditional movie-verse Camaro and G1 VW Bug.
A retool and repaint, including really shiny chrome, of Revenge of the Fallen Leader class Optimus Prime. In this version, his dark-blue is replaced with a more purplish color and his orange blades have become translucent with some silver. Also, his fuel tanks detach and combine to form his Ion Blaster and his mouth is now visible. Unfourtanetly, all that chrome makes it even harder for him to transform than the last prime. All of these new things make him even more accurate to the movie than his predecessor. Like the picture on the right says, Buster Optimus Prime was rereleased, this time with his mouthplate, in an exclusive set with a redecoed Jetfire.
Optimus Prime was given the Matrix by Primus himself, and used to be friends with Megatron. Prowl is his closest friend and Ratchet is his oldest. Searching for Energon, the Autobots landed on Earth, but were followed by the Decepticons. With the help of their human allies, they bested their foes, and knowing they would return, decided to stay and wait to defend the planet once more. Optimus Prime was proud to be an Autobot. I Am Optimus Prime
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.
Mega Optimus Prime is a new larger-sized mold with the similar transformation scheme from the 3-Step Changer toy. It transforms from truck to robot in just 3 easy steps! His deco is based on his appearance in the season finale "Battlegrounds". He also obtains additional articulation on the arms, and sports connector ports for any Robots in Disguise (2015) Mini-Con figures.
Like the original figure, Powermaster Prime is composed of two major components: his truck cab, which transforms into Prime himself, and his trailer, which is essentially a heavily-armed version of the original. The trailer has a fold-down ramp to allow the storage of a smaller Transformer, or perhaps spare accessories. The trailer transforms into a battle station armed with two long black rifles and two grey double-barreled cannons (featuring seating for Powermaster engine figures), all of which Optimus Prime can also wield in his fists.