The original Ultra Magnus figure has been reissued and redecoed several times down the years, and this article strives to list each edition of the figure under its own heading. The first alteration to Magnus, however, was a running change made while he was still on shelves: Originally, his tires were made of rubber and he sported paint on both his small and large robot heads, but this version was soon replaced with one featuring plastic tires and no paint on either head. In addition, the clear yellow plastic that formed his windows was removed from the cab, leaving just holes instead; and his thighs and fuel tanks were left white, as opposed to the vacuum metalized chrome ones of the original release.

Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
Four million years ago, Cybertron, shaken from its orbit and drifting through space, became threatened when it floated into the path of an asteroid field. Prime led a group of elite Autobot warriors on the Ark, the Autobot starship, on a mission to destroy the asteroids. Although the mission was successful, during the aftermath of this mission, the Ark was attacked by Decepticons hoping to overpower their weakened foes. Intent on keeping the secrets of the Ark from the Decepticons, Prime set the craft on a suicide course, crashing it into the then prehistoric planet Earth.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury

The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
This series introduced the dangerous Predacon faction, robotic dragons and mythical creatures that posed a threat to Autobot and Decepticon alike. In response, the 'Bots and 'Cons don new armor (the Autobots in spiky, over-weaponized armor reminiscent of Mad Max, while the Decepticons take on more beastly traits) and are armed with new gimmick-laden launching/spinning weapons. On-package bios were reduced in length to just a sentence or two, and the instruction sheets instead feature facts about one of the figure's main weapons, as well as a chapter of the Tales of the Beast Hunters prose story.
As the Universe War began, Optimus Primal was shown a myriad of Transformers from across all timelines that he could choose to recruit into his Children of Primus in the battle against the Minions of Unicron. One such possibility was a Transformer who was either Thunder Clash or Optimus Prime, but, regardless, Primal chose Depth Charge and Rhinox instead. Homecoming
Inspired by the 1985 promotional version of Optimus Prime that featured Pepsi stickers on his trailer, this outlandish incarnation of Prime is a slightly altered version of Takara's 2005 Pepsi Convoy figure (which represented a different character to Prime). The figure was only sold by Hasbro Toy Shop at various conventions, and given away as a promotional prize by Pepsi, via their Mountain Dew brand.
In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.

The more interesting "Sky Master Mode", revealed in the "Cybertron Satellite" segment of "Phantom Transformation! Mind-Diving", has him using O.P. as a blaster, two B.2s as leg-thrusters, and two sets of C.L./Jida(!) combinations as back-mounted jet packs. The AMW versions of C.L. and Jida, while not as color-coordinated, are a far more economical option than buying two of each Cliffjumper. Good luck with the second B.2. This mode was created as a "counter" to the aerial combatant Starscream, along with the Energon Sniper Combo Weapon (despite it being a Decepticon-Micron-formed weapon). Apparently, the "Arms Up Mission" game isn't picky about factions.
A special edition Bearbrick released in celebration of the Transformers 30th anniversary, Optimus Prime is a redeco of Bearbrick G1 Optimus Prime in a deco based on his Age of Extinction appearance. He transforms from a Bearbrick painted up like himself to a bear-eared robot and comes with no accessories, but holes in his robot mode hands can accommodate other toys' weapons.
The color scheme of this special redeco of Super class Optimus Prime was decided through a colouring contest held in the December 2004 issue of TV Magazine, in which entrants coloured in lineart of Prime in the scheme they wanted to see. The winning entry rendered Prime in a... distinct palette of grey, cream, dark red, and purple chrome, with blue, white, and yellow drones. It was limited to only ten pieces, making it one of the rarer Transformers toys in existence.
Available only at Kay-Bee toys (well, at first), Machine Wars Optimus Prime is a redeco and slight modification of the European Generation One exclusive Turbomaster leader Thunder Clash, transforming into a Cybertronic truck cab. It also lacks the mouthplate, revealing the mouth. The trailer unit unfolds to become a missile-launching assault tower. The tower's gravity-feed missile launchers were retooled to accommodate the new, longer spring-loaded missiles in lieu of the much smaller original projectiles due to projectile choke-gate safety testing.

The Japanese release of Powermaster Optimus Prime actually represented a new character named Ginrai, and featured several retools: the cab featured die-cast metal, shortened smokestacks, vacuum-metalized plastic and clear blue windows, while the trailer was given retractable super robot fists. This Japanese version was eventually issued by Hasbro in 2003 as part of the Commemorative Series collection (see below).
In April 2007, photos of a repainted Alternators Mirage, in a color scheme similar to Kiss Players Hot Rodimus, and in Alterators-style "fishbowl" packaging began to appear on the internet. Simply called Rodimus, the 27th Alternator lacks almost all of the Kiss Players accessories, including the fishing pole, but keeps the new head sculpt. This figure also sports the classic "flame" detailing in lieu of the Kiss Player's white stripes, while the vanity plate reads "TOO HOT". Rodimus was first sold as a convention exclusive at the 2007 San Diego Comic-Con. The Monday after the convention, it was made available on the Hasbro Toy Shop website, where it would sell out that same morning. The instructions present an alternate name for the figure: Rodimus Prime; whether this is merely an oversight is unknown.
In a world where the Transformers' war settled into a series of friendly competitive races known as the Transformers GT, Optimus Prime became the GT Transformer known as GT-R Prime. As a racer he was known for his serious but sometimes hot-blooded personality and his skillful use of the Impact Wrench Gun, though he maintained an honorable policy never to fire directly at an opposing racer's body. Like other racers, GT-R Prime put a limit on his own strength by separating his Matrix into a GT Sister, creating his partner Misaki.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
×