TakaraTomy released another reissue based on the Encore version as part of their Chronicle line in 2011, lacking the original Generation 1 trailer. Instead, the Chronicle version was available in a two-pack with Dark of the Moon Deluxe Class Optimus Prime and a new trailer that could be used by both Optimuses, thanks to a retooled trailer hitch on the Generation 1 Optimus Prime figure.
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
Optimus suffers from a design flaw that many other Voyager Class figures in the Combiner Wars line experience: the detents, or "click points", on the heavily-ratcheted outward motion of his hips (which also form the hips of his torso mode) are few in number and very far apart. As a result, Prime's legs have great difficulty assuming the natural "A-stance" formation that the angled design of his foot sculpt seems to have been meant to accommodate. Likewise, when forming the torso of Ultra Prime, the interactions of the knee-lock mechanism and the hip detents almost always force Ultra Prime's legs into either an awkwardly knock-kneed arrangement or an equally awkward, and often unstable, bow-legged posture (as seen in the image to the right) that prevents Ultra Prime from standing flat-footed. Unlike Motormaster, this version of Optimus was the only one to not receive the improved hip ratchets implemented in its future releases in some shape or form by Hasbro, though they would be used for the Battle Core redeco later in the line. However, there are third party ratchet replacements for the hips.
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.
This Turbo Change Series Optimus Prime toy is a slight redeco/retool of the Lost Age Series toy. Deco changes include omitting the flame tampos on his legs and shoulder, and added blue pinstripes on the Trailer/Wing Backpack to evoke his Generation 1 toy's trailer. This toy also features some new parts like the screen-accurate forearms, the command deck for the smaller Turbo Change Series toys, and the trailer's adapter. His usual Sword of Judgment is now replaced with a screen-accurate mold that is similar to the Armor Knight toy's sword, and he now features a new Vector Shield piece, which can convert into a battle axe.
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)
One peaceful day, Optimus decided it was too quiet, and sent Bumblebee and Mirage to find out what the Decepticons were up to. Sure enough, the Decepticons were looking for a factory, so Optimus had Mirage create a holographic factory as a trick, and ambushed the Decepticons. Optimus himself hurled Megatron into orbit. Decepticon Patrol Optimus and his Autobots rescued Sparkplug and Buster Witwicky when the pair were captured by Decepticons, and afterwards Prime was amazed when Sparkplug repaired Wheeljack and Prowl. After Bumblebee and Hound discovered that the Decepticons were attacking Hoover Dam, Optimus and his team defeated them. The Deadly Fuel Shortage
Prime's cab and trailer can also combine to form a super robot mode. Transforming the cab into the torso portion sends the transformation command to the trailer, which raises itself up off the ground to become a pair of immobile, statuesque legs (as long as you're not playing with it on carpet), and when the pair are connected, the super-robot head pops up with a metallic shriek sound effect. Pressing the Autobot symbol on the figure's chest activates a pulsing laser sound effect, and the small grey button on his right shoulder illuminates his fist with a red LED, which can illuminate either of his guns, as well as the Star Saber sword (the Star Saber was specifically cast in clear plastic for this purpose, but in practice, the light failed to carry even halfway up the blade).
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
However, the situation was still so desperate that Optimus not only decided to recruit human allies The battle is far from over!, but aggressively tried to recruit and deputise human children, including giving them the power to co-ordinate Autobot teams in battles. He wouldn't even make a final move on the Decepticons until he had enough child soldiers on his side. Earthlings: THE S.T.A.R.S. need your help now! Have the Decepticons defeated us once and for all? In at least one case, this likely led to the death of a small boy at Decepticon hands. Can one boy, alone, hold back the evil Decepticons?
Pressing the button on his robot mode chest activates the red lights (well, because the blue ones are expensive for the price point) on his chest, and the sounds and voice phrases (provided by Taitem Kusunoki) were played along with the light-up gimmick. Pressing the button for a few seconds will activate his long voice line with transformation sounds.
The series begins when Optimus and his crew, after picking up a disillusioned ninja named Prowl, are sent to clear rubble from a space bridge passage. There, the Autobots stumbled upon the Allspark and are immediately attacked by Megatron's battle cruiser, the Nemesis. Through treachery by Megatron's second-in-command, Starscream, Megatron was fragged and the Autobots crashed on Earth in the early 21st century. After being in stasis under Lake Erie for 50 years, the Autobots awaken in Detroit of the near future, where they immediately discovered humans in need and became heroes of the city after stopping a Sumdac Industries experiment gone wrong. During the battle for the possession of the Allspark, Optimus goes offline after defeating Starscream, only to be revived by Sari Sumdac and her Allspark-infused key.
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades. In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist. Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.
As the Universe War began, Optimus Primal was shown a myriad of Transformers from across all timelines that he could choose to recruit into his Children of Primus in the battle against the Minions of Unicron. One such possibility was a Transformer who was either Thunder Clash or Optimus Prime, but, regardless, Primal chose Depth Charge and Rhinox instead. Homecoming
If Perceptor gave out the right amount of an antidote, the poisoned Autobots were cured. Optimus ordered his troops to ready themselves for the incoming squadron of Decepticons. Perceptor’s antidote did have a side-effect on the Autobots, however; it gave them a fierce battle-fever, making them eager to take on the Decepticons head-on. Prowl suggested to Optimus that they instead opt for a more conniving counterstrike against the Decepticons, and ambush them instead.
A redeco (or should that be de-deco?) of the Grand Convoy Super Mode Pla-Kit, Grand Convoy Super Mode White Version was available exclusively on July 17th and 18th at the Japanese convention, Kodansha Super Chara Festival 2004 ("K-Fest"). It is a solid white version of the normal model kit, possessing all the features of the normal figure, which was intended to be used in a customization/painting contest held at the convention. It lacks the comic of the normal release.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
Optimus was checking up on the Autobots' ongoing energy collecting campaign when Wheeljack informed him that a disturbance in Sector 33HM of space-time would eventually cause major problems in its time-stream. Optimus assigned the investigation of this disturbance to Bumblebee, then noted that Hot Rodimus had not completed his latest report, communications with the young Autobo having been lost while he was on his own mission. With a brief inspirational speech, he urged his subordinates to redouble their efforts in maintaining harmony throughout reality. Little did Optimus suspect that in his own universe, Megatron was planning a coup against the Autobots... Uprising
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984 A.D., a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.
In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.
Part of the first wave of Beast Hunters Series 3 Voyager Class toys, Optimus Prime is functionally an upsized copy of his Beast Hunters Series 3 Cyberverse toy, though with certain sculpted details based on his larger toys, the replacement of his ball joints with more robust ratchet joints, the addition of thigh swivels, and various deco differences. As a result, his complexity is lower than in his previous Voyager Class toys, but he ends up being much, much more massive.
As battles between numerous different Primes and Megatrons erupted quite literally all across time and space, another member of the Convoy Aggregate was later seen battling Starscream, who had been empowered by Megatron to serve as leader of his Questors. This Prime was so surprised by Starscream's uncharacteristic sports car alternate mode that he left himself open for a blast from Starscream's Retroactive Nullifer cannon, which erased him from the timestream. As he faded out of existence, Prime responded to Starscream's taunts about the death of the Alternity by telling him that they were already well aware of their prophesied end and were well prepared. Foreshadows
If they took the left passageway, the group happened upon Megatron’s lab. Though Megatron attempted to trick Optimus into activating the Fortress’s self-destruct sequence, Optimus was too clever to be duped. After deactivating both the Destruction beam and the Decepticons themselves, the Autobots found Jessie tied up in a cell. The Autobots then celebrated their victory by guzzling a few quarts of fine-grade oil.
With the major threats taken care of, Optimus Prime turned his and the Autobots' attention to identifying and shutting down the rogue projects taking place across Earth using stolen Binaltech technology and secrets. It was during one of these missions that Optimus Prime faced off against Nemesis Prime, both in Binaltech Dodge Ram forms. Initially, things looked bad for Optimus Prime, as he was no match for his opponent's spectral armor. However, the Protector merged with Prime, and the enormous power that resulted allowed Prime to reflect Nemesis Prime's final attack, obliterating the evil Decepticon. Optimus Prime recalls the union of the two sparks being familiar, from an event in the distant past. Optimus Prime is reassured by the Protector about "the seeds of the future" and the Protector is revealed to be Optimus Primal.
You've got to love it when Amazon tries to be coy by sticking with code names while giving us a full look at the figure. That doesn't seem to be changing any time soon, the latest cases being our first look at stock photos of two Cyberverse Scouts on Amazon.com.au. This time around it's Ratchet under the name "Aces" and Shadow Striker under the name "Rockhounds". We got a look at these two in bot mode at New York Comic Con and later we got CG pictures, but this is our first look at both modes - Read More
Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
After their own Optimus Prime disappeared, Scavenger and Smokescreen discovered an alternate version of Optimus Prime lying unconscious and barely alive in Autobase Earth. Though Red Alert did what he could, the mysterious Prime reactivated only long enough to utter a cryptic statement about the walls crumbling and the coming of chaos, then died. Worlds Collide, Part 1 of 4
A nice article but I see a few flaws. First of all if the distribution of LEGO sizes/prices is increasingly skewed it is better to either split the sample or look at medians or rolling medians than averages. Secondly, this is a perfect case to run a regression panel regression with time dummies to see both the impact of time and the impact of size on the prices.
As with other Dark of the Moon Activators toys, this Optimus Prime (released under the Robo Power subline) is a very simple one-step transformation toy. You simply slam him down on the big blue button on the back end of his truck mode and he transforms thanks to spring-loaded mechanisms. To transform him back, just slam him down again on the same blue button.
"Special Edition" Optimus Prime is a redeco of the Classics multi-pack toy, featuring some minor paint detail changes, bluer translucent plastic, darker and cooler gray plastic, and darker metallic flake red and blue plastic, with his (previously black-only) rifle body most notably now being cast in both blue and black plastic. He came in special "book box" style packaging with black-and-white boxart, and was only available at retail in Australian and Asian markets. North American customers could later buy him via Hasbro Toy Shop.
There is some difference of opinion on how the super mode of Leader Class Optimus Prime is supposed to assembled. Takara toys and the television series portrayed with the wings up and his two large guns underslung, however Hasbro later sold the toy with pictures and instructions having the wings down and the guns over the shoulders. Commercials and repainted models by Hasbro went back to the way Takara assembled the super mode. In 2006 a Costco exclusive of Optimus Prime packaged with Wingsaber and a DVD (with Armada Supercon Optimus Prime printed on it!) of the episode United was sold, again with the wings-under gun-over super mode. In Japan a gold chrome edition of this toy was released as a Lucky Draw special.
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.