"During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.

For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
Although Cybertron's Energon stocks were destroyed, the Autobots discovered a recording pointing to the Logicon planet Metascan Alpha, which had Energon in abundance. Optimus ordered Hot Rod and Ultra Magnus to take a team each to find the planet. The Autobots discovered they were being spied on by the Decepticon Clones, and Optimus swore that Galvatron could pay. He led a team to the derelict space destroyer which the Decepticons were using for a base and fought their leader one-on-one. As he was about to destroy the Nullification Cannon, Scorponok took a swing at him which connected instead with the Cannon, obliterating it. Optimus was helped away from the destruction by Blurr and Sureshot. The War Against the Destructons, Chapter 1 of 3

Prime filled one of the chase figure slots for the tenth wave as well. This rare figure was the same as the regular Super Mode PVC, except instead of wielding his Convoy Gun, Prime was armed with the Star Saber sword. As with the previous chase figure, it could only be found in one out of every ten cases, and took the place of the full-colour Prime figure in that assortment.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
After the successful Armada toy line, Hasbro/Takara introduced Transformers: Energon. The accompanying television series program was a direct continuation of the events of Transformers: Armada and featured many of the same characters in new forms. This was reflected in the toy line, as characters such as Hot Shot, Jetfire, Optimus Prime and Megatron were all released with entirely new molds.
There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.
Available in the Timelines "Generation 2" 2-pack alongside Sgt. Hound at BotCon 2015, General Optimus Prime is a redeco of Generations Voyager Class Roadbuster based on the cancelled Generation 2 General Optimus Prime toy. He transforms into an off-road vehicle and comes with numerous weapons, all of which peg via 5mm post onto his vehicle rear/legs, shoulders, upper & lower arms, and hands: a spring-loaded, missile-firing launcher, a pistol, a rifle, and two small cannons that respectively form the scope and stock of the rifle. All of his weapons can combine to form an unwieldy superweapon. It was unknown if this figure has the loose ratcheted shoulder joints from the Legends release of the mold.

This exclusive redeco of Optimus Prime features darker shades of red and blue than his other releases and has extensive paint applications to resemble his on-screen appearances in The Last Knight, particularly his Nemesis Prime alter ego seen in the film. To that end, he features movie-accurate flame patterns, which are larger and more elaborate then the ones on the regular release or the SDCC exclusive, on his vehicle mode exterior and robot pectoral armor. His eyes and sword are also painted metallic purple, but his shield is completely unpainted for some reason.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.
The box seems to have been created rather hastily from the Japanese original. It is roughly identical to the Tomy release, but with the Japanese text edited out... mostly. Random Japanese text remains floating in space on the top of the back panel and underneath the "Jetwing Optimus Prime" name on the front. Curiously, the left flap has been rewritten to eliminate mention of NEST and the jetpack's ability to detach, while the right flap has been (badly) edited to remove all mentions of MechTech.
Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). The main torso-bot is based on Generation 1 Optimus's original body. Another limb-bot is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
An additional oddity is that unlike every other toy in the Go! toyline, Optimus Exprime came packaged in a box without a window. This is potentially because of the sheer amount of information TakaraTomy wanted to print on the box, or because they were unable to fit him into the box in robot mode with all of his accessories displayed. Whatever the reason, it left him with a smaller box than the other voyagers in the line, a substantially-altered box layout, and a much shorter profile.
This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.
Optimus Prime's body was hauled out of the Arctic Ocean by the US military. While a terrorist organization run by the enigmatic Lazarus was able to seize control of several of the other Transformers that fell back to Earth, the military worked unsuccessfully to reactivate Prime. They eventually called in Spike Witwicky. Prime Directive #1 Spike was forced by the project chief, General Robert Hallo, to use his piece of the Matrix to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades. Prime Directive #2
Aside from the Powermaster feature itself, the main gimmick of the toy is the ability of the truck cab to combine with the trailer to form the larger "Super Optimus Prime" figure. This is essentially accomplished by standing the trailer up, folding the cab in half and inserting it into the empty cavity in the trailer's torso, forming an imposing—if almost entirely unposeable—robot form armed with all four weapons. The head of this super robot form is a separate piece which can be stored in the rear of Prime's trailer when not in use. While Hi-Q was always shown plugged into Prime's chest in artwork of this mode (as seen in the picture here), this was actually entirely unnecessary as transforming into Super Optimus Prime didn't require the standard Prime toy's legs to be unlocked.
As Megatron explained that the Matrix was giving them a vision of the future, they witnessed themselves battling on Sherman Dam. The nature of their surroundings established, Megatron resumed the scheduled beating, but a series of setting shifts ended with Optimus reunited with Grimlock. Grimlock handed Prime a sword and suggested he finish Megatron for good. The War Within #5 Optimus found Megatron again, engaging him in combat and announcing that he was playing the game by Megatron's rules now—without mercy. Though he did not slay Megatron, he inflicted enough damage onto him to expunge from his memory the visions the Matrix had granted him. A short time later, Optimus joined the other Autobots in attacking the Decepticons who were trying to use Cybertron's planetary engines. Grimlock was finally impressed with Prime. Thanks to the combined efforts of Optimus and Grimlock's squad, the Decepticons were driven away and the engines were destroyed before they could tear the planet apart. Afterwards, Optimus's group arrived back at Iacon to find it destroyed. Optimus announced the Autobots were no longer evacuating the planet and threw away the Golden Disk full of the knowledge of his predecessors which the council had given him, saying he would choose his own course. The War Within #6
Walmart have uploaded a very nice commercial via their YouTube Channel that we are sure will please your optics. What is it about? This video features several famous and iconic cars like KITT from “Knight Rider”, Ecto-1 from “Ghostbusters”, Lightning McQueen from “Cars”, the Mystery Machine from “Scooby Doo” and even Fred Flintstone’s footmobile. As some of you should expect, our small yellow hero is present here in his Bumblebee Movie VW Beetle design, and with an impressive entrance emulating Ironhide’s jump from the 2007 live action movie.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
Per Ravage's original plan, with Unicron defeated, the Decepticons returned to conquer the transformers. Optimus Prime had also planned for this event, and sent Mirage to press a switch, buried deep within Cybertron, that would render all transformers inert. This was seen at the conclusion of the "Five Faces of Darkness" story arc from the original animated series. Optimus hoped that by rendering all the transformers inoperative, the war would be stopped, hoping that the humans would be able to reactivate the transformers in the future. Instead of deactivating all transformers, however, only those with original Cybertronian bodies were deactivated. Transformers with Earth-made Binaltech bodies continued to function. The Autobots effectively won the war, the large army of Binaltech Autobots easily outnumbering the few Decepticons who had managed to procure Binaltech upgrades. The few Decepticons remaining, effectively just Nemesis Prime and Shockwave, escaped with Megatron and their other inert comrades.
Optimus Prime leads Bumblebee, Drift, Kup, Prowl, Ratchet, and Wheeljack in Las Vegas when a Cybertronian ship crashes, containing Galvatron, Cyclonus, Scourge, and an infestation of zombies from another universe. Galvatron attempts to take command of the Autobots and, after fighting them, explains his mission to stop an undead infestation. Wheeljack sets up an energy shield around the city to keep the infestation contained, but it only last for 24 hours. Despite the containment effort, Kup realizes that Bayonet, a Decepticon in Galvatron's command, is not all she seems. She turns out to be the extradimensional vampire Britt.[17]

Although Rodimus plays the part of the brash youth, he is actually very intelligent, and has no loyalty to Optimus Prime; only his own personal gain. According to his biography, Rodimus used to be leader of the Wreckers, a mercenary group hired by Optimus Prime; but after the deaths of the other members, he joined the Autobot Seekers under the command of Goldbug.

An exclusive version of Titan Class Metroplex was made available at San Diego Comic-Con 2013. He comes with 12 small, non-transforming figurines of Orion Pax, Megatron, Bumblebee, Thundercracker, Trailcutter, and Hoist, all in both modes. The figurines are based on their Thrilling 30 Generations Deluxe Class toys, and similarly to Decoys, the Autobot figurines are cast in red plastic, and the Decepticons in purple.


Released in the first wave of the Authentics toyline, "Autobot Optimus Prime" is a new mold the size of a 2015 Robots in Disguise Battle Pack toy. He changes from an evergreen-inspired robot into a more G1-based truck in just four steps. His instructions are incorrect; for truck mode, his legs must be folded in before the arms, otherwise the locking tabs on the arms will get in the way. Due to his transformation, he ends up with no elbows and a fake chest. He also has problems standing up due to hollow legs.
In Another Light, Rodimus finally assumes total control over the Autobots upon Optimus Prime and several of his closest loyalists being jettisoned into space and left near death following the Battle of Decepticon City. However, his reign came to a swift end when the group returned, having been reformatted into the Knights of Unicron. The heroically reborn Optimus, now known as Nova Prime, engaged his usurper in battle and defeated Rodimus, sending him plummeting into Cybertron's depths. However, Rodimus then encountered the malevolent Primus, who enlisted his aid and that of other "true Autobots" in ridding his surface of those he considered vermin-namely, all Decepticons and Autobots not loyal to the same cause. This would lead to an epic battle between Primus' minions and the heroic Transformers of their universe: Galvatron's Decepticons, Nova Prime's Autobots, and a group of Maximals created from Classics Autobots.
These include two large guns, patterned after the new weapons included with the G2 version of the classic Optimus Prime toy, which can be attached to the trailer in a similar fashion to those of Powermaster Prime. Also included are two additional (blue) Prime heads, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger's interpretation of Prime, especially as seen on the cover of the first issue, one pristine and the other battle-damaged.
In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.

Virtually every toy in this list has a scannable insignia sticker on it. For Hasbro releases, it temporarily unlocks that toy as a playable character in the Robots in Disguise mobile game, and can only be scanned once per day. TakaraTomy releases simply check that off on their mobile app's collection list. It's honestly quicker and less redundant to say which toys don't have this feature. Meanwhile, scanning the Combiner Force toys' insignia stickers gives the player Tickets, which can be spent by giving them to Cryostase via the main map menu.
This minor redeco of the Optimus Prime Launcher features grey wheels, blue optics, and added red paint on its upper arms, while the launcher has grey plastic in place of black, smaller Autobot symbols on its sides, and gold paint on its interior instead of silver. The stock photography on the packaging depicts Optimus with a blue stripe on his built-in "trailer", which was omitted in the final product.
The mid-range Voyager class Movie Optimus Prime toy transforms into an amalgamation of the Kenworth W900 and the Peterbilt 379, making this toy fairly inaccurate to the actual vehicle Optimus Prime turned into. Because of the smaller size and lessened complexity, the Voyager class Optimus Prime features a significantly different transformation sequence compared to the Leader class toy, and indeed, the actual CGI design. However, as the actual truck cabin no longer forms his chest, the cabin now features a small interior with opening doors and a non-removable cowboy-hat-bedecked driver figurine that flips out of the seat when the driver's side door is opened.
In search of new energy sources, Optimus led a team to central South America. When they spotted Mount Sheelah, their two human friends John and Tim Gordon explained volcanoes, and, believing it to be of possible use, the Autobots went to examine it. During a battle with the Decepticons over the volcano, Optimus was convinced by the two humans to retreat, ultimately saving them when Mount Sheelah erupted. Terror of Mount Sheelah After discovering that the Decepticons were kidnapping humans, Optimus sent Bumblebee to scout the Decepticon base. When Bumblebee returned with the Decepticons' global crystal, Optimus was able to use it to blackmail the Decepticons into letting the humans go. Bumblebee to the Rescue
This toy, as well as "Shake Bulkhead", was a bit of a chore to obtain. First you had to buy a Happy Meal on July 30th or 31st, which netted you a Dark of the Moon Optimus Prime or Bumblebee toy and a "weekend exclusive Special DVD and MechTech Sheet with red ticket". Said ticket was then traded in at participating toy stores when buying any Dark of the Moon toy to get one of the two charms. (Completing the set with "Potato Bumblebee" was considerably easier, at least.)
The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.

Besides finding Megatron for the Transformers Movieverse, Mr. Sheppard was known for his many appearances across the Star Trek series and films. Additionally, he was well-known for his work as Blank Reg in the Babylon 5 series, and many other appearances in series like Dr. Who and more over his long-time career. You can read the full article about him via TV Guide.com.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.

The Power Plus series are similar to the Power series, except these come with the core that unlocks extra features. The Bumblebee figures in this series are nearly the same as the Power series versions (Camaro ‘Bee’s Power Plus figure has his unmasked head), so if you’re going to get them, and you want the cores, go with these versions. If you want Optimus Prime at this size, though, you’ll have to go with this version.

China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More

Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.
If Sparkplug suggested that the Autobots remained in their vehicle modes, he would concoct a plan where the Autobots would help evacuate the entire town in their vehicle modes. With no more than four trips in and out of the city, Optimus and the rest of the team carried out the plan without incident. The Autobots then transformed and engaged the approaching Decepticons, whom they easily dispatched. With the city safe, the Autobots moved out to help their comrades at the Decepticon fortress.
Besides finding Megatron for the Transformers Movieverse, Mr. Sheppard was known for his many appearances across the Star Trek series and films. Additionally, he was well-known for his work as Blank Reg in the Babylon 5 series, and many other appearances in series like Dr. Who and more over his long-time career. You can read the full article about him via TV Guide.com.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
Released in conjunction with Japanese cellphone maker au[10], au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
Optimus Prime is composed of two parts, his truck cab and his trailer. His new truck cab is reminiscent of the original Optimus Prime truck cab, but is constructed entirely of plastic, lacks vacuum-metalized plastic and has no clear windows. It also transforms differently in that the front of the truck is no longer the robot mode's chest. His chest is now formed out of the truck's cabin rear, styled after his cartoon appearance. He is armed with two long black rifles, based in part upon his cartoon rifle.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.

Separate from the retreading and cartoon accuracy and backpack stuff one persons comment hit home for me as to why I will buy this new Optimus. It likely has the hyper articulation that they did in Sunstreaker and Megatron. So I will buy it for that to match Megatron. Let’s face it. mP-10 has a lot of nice things but even when it first came out I thought it had gorilla arms compared to mp-01.


This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.
×