Compared to the Combiner Wars release of the mold, Convoy features additional paint operations on the thighs, truck bumpers, the details on the inner legs, the gestalt chest halves (which are now painted over due to being molded in grey plastic), and the gestalt torso's lower section. The stomach's deco is also minimized, and the silver paint operations on the lower legs are now replaced with gunmetal while the mute metallic blue is now shiny metallic. When it comes to unpaintable plastic; his leg joints and feet are now blue, while the gestalt skirt flap is now the same grey as the arms. In addition, his flip-up gestalt leg panels and thighs are now molded in black, with the latter being painted in silver with some yellow details.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
As had first been done in the Armada line, Takara elected to supplement their release of the Super class Optimus Prime figure with a new-mold Deluxe class toy. Coming without trailer, Prime Force or electronics, this Prime discarded the larger toy's ability to form Super Mode in favor of being able to Powerlinx with the other compatible toys of the Energon line, forming either a torso or a pair of legs that the other Autobots could connect to. Like the Deluxe Armada Prime, this one too was on the small side for its size class, but just as that figure could, this small Prime can still tow the Super class figure's trailer.
Prime's personality had been copied onto a floppy disk by Ethan Zachary, the technician running the game. He employed Prime in various video game scenarios he developed. Prime's damaged mind led him to believe that he himself was a video game character and, in an attempt to bring him back to life, Goldbug, Joyride, Slapdash, and Getaway took the disk to the planet Nebulos. They built a new body for Optimus Prime and upgraded it with the ability to combine with the trailer to form a larger robot. In an effort to keep Transformers off their planet, the Nebulans had poisoned their fuel. The sensation of dying, however, convinced Prime that he was truly alive and not a game character. To save his life, the Nebulan scientist Hi-Q bonded with him, creating Powermaster Optimus Prime. A UK story set around the same time in UK #198, Prime returned to Earth and tried to rekindle his feeling for the planet. After a battle between his forces and an advance force from Cybertron ruined a small town's Christmas festivities, he realized that bringing the Transformers to Earth was far worse than anything his troops could have done and vowed to protect its inhabitants from Decepticon aggression.[6]

Similar to the Activators toyline, One-Step Changer Optimus Prime features a spring-loaded transformation. He features swivel articulation in the head and both arms. He shares a similar (not identical) transformation with his fellow One-Step changer, Hound. Also, due to his transformation scheme, his shoulders can be pushed forward (the arms is pushed on the same time), which also allows him to wield a close ranged weapons with longer handles with both hands.
Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.
In the third nexus, Optimus oversaw Ironhide testing Sparkplug's latest invention, the Sun-Pak, a miraculous device capable of fuelling a Transformer for an entire Earth day after being charged for only an hour in sunlight. As the trial-run wound down to an end, the Decepticons suddenly burst into the Autobots' secret underground testing facility, forcing Optimus to decide whether to order a tactical retreat, or have his Autobots fight the intruders despite his troops' low energy reserves. If he chose to stand and fight, he had the additional choice to either make the Autobots concentrate on Starscream, who is leading the charge against the Autobots, or divide his troops' attention onto all of the Decepticon assailants. If Optimus chose to attempt to eliminate Starscream once and for all, the Decepticon Seeker would beg for mercy, forcing Optimus into a choice yet again: accept the snivelling Decepticon's surrender, or continue his attempt to end Starscream's evil once and for all. Accepting Starscream's surrender spells victory for the Autobots, whereas ignoring Starscream pleas ultimately leads to Sparkplug being kidnapped by the Decepticons, necessitating Optimus to send Buster, Blaster and Bumblebee on a perilous retrieval mission while the other Autobots recharge at the Autobots' home base.
In his stronghold, Serpent O.R. questioned Prime about his own worthiness to carry the Matrix, but Optimus broke free of his chains and aggressively ordered him to surrender. The Art of War #4 A group of Decepticons broke in and nearly took Prime apart, but not before Serpent O.R. took the Matrix for himself and changed into the massive Serpentor Prime. The Matrix showed Serpentor Prime the error of his ways but as he was about to commit suicide Cobra Commander tripped a device and took over Serpentor Prime's body. Moments before he crushed Arcee, a severely damaged Optimus Prime threw Hawk toward the Matrix but warned the human not to touch the artifact. Hawk did so anyway and through a quasi-mystical transfer of power Serpentor Prime was vanquished.
Prime's cab and trailer can also combine to form a super robot mode. Transforming the cab into the torso portion sends the transformation command to the trailer, which raises itself up off the ground to become a pair of immobile, statuesque legs (as long as you're not playing with it on carpet), and when the pair are connected, the super-robot head pops up with a metallic shriek sound effect. Pressing the Autobot symbol on the figure's chest activates a pulsing laser sound effect, and the small grey button on his right shoulder illuminates his fist with a red LED, which can illuminate either of his guns, as well as the Star Saber sword (the Star Saber was specifically cast in clear plastic for this purpose, but in practice, the light failed to carry even halfway up the blade).

A Walmart exclusive set featuring a redeco of the first Cyberverse Commander Optimus Prime figure, featuring moderately brighter colors and paint, while his jetpack and rifles are now black, with the jetpack's wings having silver flames. He also lacks the flame pattern on top of his hood, and features different flame patterns on the sides of the hood.


Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
A single-packed version of the battle damaged Voyager Optimus Prime toy from the Sam's Club exclusive three-pack. Although the assortment number and the general packaging style seemed to indicate that this might be a Best Buy exclusive, this has been confirmed to be an "international market" exclusive. It has been released in Asia, but will presumably not be available in the USA outside the Sam's Club three-pack.
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984 A.D., a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.
As with other earlier Cyber Series figures, Optimus Prime had a rather strange release cycle. At first, he only retailed exclusively in Asia and Latin America, with the closest to a U.S. release being in limited quantities from online retailer BigBadToyStore.com. He did, however, end up being available in the Universal Studios Theme Park, and also later as a Walgreens exclusive.
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.

Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More

Screen Rant is exclusively announcing that the Transformers brand will join the pop culture series of toys with figures from Star Wars and Marvel and you can get your first look below. Hasbro relaunched their Mighty Muggs line in January 2018 with by announcing plans for over 50 figures from Star Wars and Marvel, with each collectible figure including the new push-and-turn head feature that changes their facial expressions. And yes, this new feature applies to your favorite Cybertronians too!
Marissa and Prime are now on the run from the EDC and are also frequently attacked by the mysterious "Legion" Transformers. When faced with such foes, Marissa unleashes her "Kiss Player" ability by kissing Prime, fusing with him once again, increasing his power so that he can best their opponents. Prime is armed with the Surf Blade, a weapon formed out of Marissa's surfboard, wielded expertly thanks to the knife skills Marissa passes on to him when they merge.[18]
Henkei! Henkei! Transformers Convoy is a redeco of Classics Optimus Prime. He features a significantly altered colour scheme, generally to make the toy more closely resemble his appearance in the Generation One cartoon and the original toyline. His truck mode features less silver paint striping, but compensates by vacuum-metalizing the entire grill/fender area silver chrome. In robot mode all of his previously grey plastic has been replaced with red plastic and mostly painted silver (or in case of the grill & bumper, chromed), along with smaller decos. Since Henkei! toys do not feature a heat-sensitive rubsign, Henkei Convoy has two Autobot sigils tampographed onto his shoulders.
Smallest Transforming Prime was redecoed the following year for the second wave of the line, into a color scheme based on his Generation 1 cartoon appearance featuring brighter reds and blues, white thighs, yellow details on his bumper, and blue eyes and windows. This version of the figure was made available for a second time in the next wave ("Wave 2.5"), with a new anime-decorated version of the Combat Deck now available as a rare "chase" figure.
This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.

We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.
The Autobots helped repair a Smitco Oil Refinery site which the Lazarus-controlled Transformers had attacked. Optimus had no answer for Spikes accusation that the Transformers' presence on Earth was responsible for the destruction. When Megatron's activities at Lazarus's base were spotted by the military, Optimus insisted on the Autobots going in without backup. They discovered Megatron in the middle of a plan to reformat Earth into a new Cybertron using a cyber-virus. Optimus rejected Megatron's suggestion he should just let it happen, but while the two factions fought, the human military unleashed Operation Clean-Up, dropping a bomb on them. Prime Directive #3
The Japanese release of the figure also underwent the changes in weapon shapes, but never featured a silver Roller; instead, their original release of Prime featured a Diaclone-style Roller without the two rear pegs, and the differently-shaped launcher that accommodated him, before a running change switched over to the Hasbro version of the mold. Finally, in some European countries, Prime sported red feet, as opposed to his traditional blue; this version of the figure is also known in some cases to feature a differently-painted forehead crest which leaves the three central indentations unpainted blue.
×