An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]
Revenge of the Fallen Legends class Optimus Prime is an all-new, much more accurate mold compared to the 2007 Legends class Prime, having a much greater accuracy in both robot and vehicle mode. In particular, his vehicle mode isn't inexplicably missing one smokestack like the 2007 toy. It should be noted that he was molded in only one paintable plastic color, with red and blue deco patterns decked on it. The top of the truck's bunk (ending up on his back in robot mode) has a slot to combine with Jetfire. For some reason, this isn't mentioned in the instructions, though they're hardly needed.
Tim Bailey, Sara Blackburn, Stephen Clark, Jeffrey Cohen, Adam Dimuzio, Mathias DeRider, Tom Fassbender, Luke Forney, Logan Giannini, Travis Hanson, Sean Hallenbeck, Michael Harrison, Kim Haynes, Whit Honea, Greg Howley, Michael J., Angela Leach, Michael LeSauvage, Jim MacQuarrie, Eric Parrish, Michael Pistiolas, Ricardo Rebelo, Drew Rich, Mitchell Roush, Mariana Ruiz, Tony Sims, Randy Slavey, Erik Stanfill, Andrew Terranova, Gerry Tolbert, Mark Vorenkamp, Chris Wickersham
The Decepticons' initial strike came abruptly and brutally, devastating entire districts of Metropolis. Optimus was meeting with Hot Rodimus as this took place, and was nearly overcome with grief when Ratchet informed him of the carnage the Decepticons had wrought. Steeling himself, Optimus coordinated the city's defenses, ordering his troops to be dispatched where they were most needed to repel the invasion. Upon spotting an old enemy on one of the nearby monitors, Optimus geared up to go in the field himself. Arming himself with his favorite pistol, Optimus resolved to take down Megatron. Raid
In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.

This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.


The back story of the Transformers on ancient Cybertron is told in Transformers: Defiance. In this story, Starscream returns to Cybertron after encountering an enemy scout ship in the Eshems Nebula. After being repaired for minor damage by Ratchet, Starscream and Ironhide report to Optimus Prime and Megatron.[63] In issue #2, Optimus Prime is ordered by Megatron to counter-attack Cybertron's invaders, but instead, Optimus organizes a resistance to Megatron's decision. In issue #3, Optimus Prime, Jazz, and Prowl break into Megatron's quarters while he is away looking for clues to why he is acting so strangely. What they find is an ancient artifact that Megatron had restored.[64]

His original trailer is not included with the set; instead, he comes with a new deluxe-scaled trailer, not available with any other figure, based on the one towed by Prime in Dark of the Moon. The trailer is compatible with both figures, and sports 5mm post-holes that will hold (among many other things) G1 Prime's laser rifle and the MechTech weapon Movie Prime is armed with.


Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.
It should be noted that in the lead up to the premiere of the Japanese translation of this series, TakaraTomy marketing director Masahiko Yamazaki indicated changes would be made to place it as a prequel to the 2007 Transformers live-action film. This would have made this version of Optimus Prime an earlier version of the film character. In practice however, the only changes that were made consisted of trimming for time to allow additional promotional material to be added to the start and end, and the name change of Bulkhead into "Ironhide" (with Ironhide becoming "Armorhide"). The future 22nd century Detroit setting and characterizations of the cast remain as they were in the original production.
Alternity Convoy transforms into a 1:32 scale Nissan GT-R, featuring die-cast metal parts, an opening hood, trunk and doors, as well as an interior, complete with his feet and thighs being sculpted to form the back seats. This complex figure stands at 6.5" tall, and is armed with a pair of blasters on each arm. In the hyper-dimensional world of the oft-confusing Alternity fiction, this figure specifically represents the Optimus Prime of universal stream Primax 903.0 Beta.
If Optimus decided to send the lead team to attack the Decepticon headquarters, the team managed to infiltrate the Decepticon headquarters by using Beachcomber’s knowledge of the secret doors’ location, and Brawn’s strength to keep the doors opened. The Autobots then stormed the fortress, and Optimus maimed Megatron himself with a shot of his rifle. He then grappled the Decepticon leader, and forced him to lead himself, Inferno and Beachcomber to the Decepticons’ lab. There, the Autobots disabled and destroyed the Destruction Beam device, captured Megatron, and left many Decepticons permanently maimed. Though they later traded Megatron back to the Decepticons for the safe relief of the Autobots captured in Center City, the Autobots were ultimately victorious that day.
After a long period of stalemate, Prime grew frustrated at the lack of progress his troops were making against Megatron's forces. To remedy the situation, he ordered the creation of several new Transformers who would be perfectly adapted for combat on Earth. The first among these was Pirhana. Piranha's The Official Transformers: Generation 2 Annual profile But one of the Autobots' great victories came not through superior numbers or firepower, but trickery and cunning. As part of a plan devised by Optimus Prime's new second-in-command Prowl, the Autobots allowed Starscream to "overhear" that they had uncovered an ancient Cybertronian ship with the means to return to Cybertron. They then stationed themselves around the vessel, atop of Table Mountain in Africa, and awaited the inevitable Decepticon attack over its possession. Optimus met Megatron in battle, but ordered his troops to withdraw after a brief skirmish, declaring the Decepticons too powerful to hold back. Once the Decepticons claimed their prized and entered the ship, they found themselves locked inside it. The ship then shot up away from the planet, leaving the Decepticons without the means to control it. Though the Autobots knew this wouldn't rid them permanently of the Decepticons, they were satisfied with a brief period of calm while they were off-world. Day of the Decepticons
As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences
The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".
The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). Another is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
Optimus was eventually revived by the Autobots when they arrived to liberate Master from Decepticon hands. They found allies in the native Cyberdroids—those Optimus loyalists who had fought the Malignus insurgency. Autobots and Cyberdroids liberated the deposed triumvirate of Apex, Hi-Q, and Diac. Hoping to check the power-mad Galvatron and his three Cyberdroid allies, the Autobot leader was revived and binary-bonded himself to three Cyberdroids, including Surge, and Apex, who formed his head. Thus empowered, "Triple-Threat Prime" battled Galvatron and his forces across Master in a series of epic conflicts. The Autobots were unsuccessful and were forced to retreat. A Brush With Infamy–Prologue
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.

In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.


A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
Offered as part of a Lucky Draw campaign in August 2004, this extremely rare version of Masterpiece Convoy is almost entirely vacuum-metalized gold, lacking any other painted detail or stickers. The parts which are not viable are molded in a flat golden plastic; the only exceptions are its rubber tires, the core of the Matrix and the energon-axe, which remain black, blue and orange, respectively. Whether or not the figure was intended to evoke Optimus Prime's entirely-golden appearance in the cartoon episode "The Golden Lagoon", when he was coated with electrum, is unknown; given that entirely chroming a figure gold is a fairly standard deco for Lucky Draw figures, it may just be happy coincidence more than anything else.
G1 Convoy comes with two sets of fists, each pair featuring differently-shaped fist holes: one pair with square holes to hold the figure's "Convoy Gun" (as his ion blaster is called), and the other with round 3mm-compatible holes to hold the spring-loaded translucent blue missile launcher (a generic accessory also available with Robotmasters Beast Megatron and Beast Convoy). The fists are swapped out by simply popping them out of the wrist-hinge that holds them in place; the figure also includes an energon-axe that can be inserted into the wrist instead of a fist.
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.

This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character [[Optimus Prime#The Transformers cartoon|Orion Pax]] from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
Released as part of TakaraTomy's Transformers Movie The Best toyline to conclude the 10th anniversary of the live-action film series, this Optimus Prime is an extensive redeco of his Evasion mode toy. He also uses the faceplated head and the dark gray-colored Ion Cannon used for the Evolution 2-pack/Platinum Edition 5-pack release. While his deco had taken cues from both the TakaraTomy release of Evasion Mode Optimus Prime and the Platinum Edition Breakout Battle figure, the weathering pattern bears a similar resemblance to his rusty version of the figure. Unfortunately, this release suffers from heavy mold degradation, particularly in the form of ill-fitting tabs around the truck front/shoulder area.

He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.
Chronicle "Movie Optimus Prime" is an e-Hobby exclusive redeco of the Deluxe-Class Dark of the Moon Optimus Prime figure, and comes in a two-pack with a reissue of the Generation 1 Optimus Prime figure. Instead of the blaster/axe MechTech weapon the original release of the figure came with, Prime is armed with a redeco of Dark of the Moon Jolt's Blaster/Hand Cannon weapon.

General Optimus Prime later attended a meeting of the Convoy held by Starscream. There, he assured the others present that he had been mistaken about the rumored Megatron's identity. Starscream was convinced, but the rest of the Convoy were savvy to the truth. The other Optimuses supported General Optimus Prime's decision, stating that if C-81 had earned the General's trust, that was good enough for the rest of them. Optimus was later seen hanging out with Spy-Eye on his off-time. Cybertron's Most Wanted
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.

The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
Brian Colin, Peter Smyth, Mark Buffington, Josh H., Propelstalz, Mary Crocker, Wayne Moulton Jr, Mitch Gross, Jim Valko, Andrew Brown, Lucy Ravitch, Nicholas Duresky, Heather Hofshi, John Kemp, Thorsten Karge, Natasha Dzurny, Keith Ives, Benjamin Chan, Neal Bhatnagar, Justin Farr, Regan Lee, Elaine, Nate Fugal, Stephanie Tennison, Jon Rasmussen, Ryan Pulis, Owen Duffy, Colman Reilly, Anthony, Mark Richman, Alexis Ohanian, Steve, Greg “TVsEgon” Skinner, Andy Saavedra, Daniel, Willie Raymond Taylor III, Chad Ingham, Irene Christian, Clinton Richmond, Jamey Stegmaier, James Allenspach, John Howell, Leif Terry, Tiago Pereira, Nathan Heath, Grinidon, Roman, Berserker Hew, Clark Stacey, Ben Harkins, Kayvaan Ghassemieh, Travis B., Justin Myers, Magna Nordgard, Jim Griffin, Jeff, David Smith, Matthew Titelbaum, Dennis Hitzeman, Daniel Lieske, Michael Jantze, Ruddy, Tom Damico, Kelson, Michelangelo Grigni
In 2004 the LEGO group was in trouble. They were losing money and losing market share to other toys and entertainment products4.  In order to address some fundamental issues in their business, they needed to cut costs. Leading up to this crisis, LEGO bricks had been adding new designs and colors without consideration for the cost to the business. LEGO went through a large reorganization and cut the production of unique elements in half, the variety of colors in half, and the number of suppliers by 80%. This, in addition to an increase in licensed sets and an expansion into video games, saved the LEGO Company.
Based on Optimus Prime's Cybertronian form as seen in the Dreamwave comic book "The War Within", this version of Prime transforms into Cybertronian truck. The figure was personally designed by comic artist Don Figueroa, who created the original comic design in the first place, and his signature is left on the figure in the most literal way: the word "DON" can be seen sculpted into the barrel of his silver ion blaster.
Transformers GT "GT-R Prime" is a heavy retool of Alternity Convoy, transforming into a 1:32 replica of the Motul Autech GT-R race car used by the Nismo team in the Super GT racing championship series. He retains the flip-out blasters of the Alternity toy and can also wield his new Impact Wrench Gun accessory (also called the "Optimus Rifle" on the Transformers GT website), a weapon based on the impact wrenches used in car repairs. Like all GT toys, Prime also comes with a GT Sister, poseable human figures themed after race queens, his partner being a lady named Misaki.
When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
The first reissue of the original Optimus Prime toy in North America since the Generation 1 toyline reached its end, this "Commemorative Series" edition of the figure was a Toys R Us exclusive. It was mostly identical to the original figure, save for some necessary modifications made for safety reasons: In the first instance of what would become a recognizable alteration to the mold, the toy's smokestacks were shortened, while the Combat Deck's firing missiles were elongated to prevent potential choking, as was the case with all other Commemorative Series figures' firing missiles. This release also had the trailer's launching feature removed.
Optimus got Megatron's contact information off the internet and invited the Decepticon leader to BotCon 2009. Though it took some doing, he managed to convince Megatron that the convention would be worth attending. Optimus also planned on going to BotCon, and left for the convention alongside Wheeljack, Mirage, Ironhide, Jazz and Prowl. BotCon 2009!
In Another Light, Rodimus finally assumes total control over the Autobots upon Optimus Prime and several of his closest loyalists being jettisoned into space and left near death following the Battle of Decepticon City. However, his reign came to a swift end when the group returned, having been reformatted into the Knights of Unicron. The heroically reborn Optimus, now known as Nova Prime, engaged his usurper in battle and defeated Rodimus, sending him plummeting into Cybertron's depths. However, Rodimus then encountered the malevolent Primus, who enlisted his aid and that of other "true Autobots" in ridding his surface of those he considered vermin-namely, all Decepticons and Autobots not loyal to the same cause. This would lead to an epic battle between Primus' minions and the heroic Transformers of their universe: Galvatron's Decepticons, Nova Prime's Autobots, and a group of Maximals created from Classics Autobots.
Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.
In his first appearance in the series, Optimus looks similar to the original G1 Optimus Prime until he copies himself with a semi-truck and his design in robot mode changes. Soon after, he retrieves his Mini-Con partner, Sparkplug Witwicky. The cab of his truck mode detaches to form Optimus himself, while the trailer transforms into a battle station mode operable by Optimus and several Mini-Cons. Optimus can also combine with his base to form a "Super Mode" robot that, when combined with Sparkplug, can fire a series of powerful lasers. Additionally, Optimus can combine with Jetfire and/or Overload in his Super Mode for additional power.[10]
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
×