Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.
My 6 year old son has recently gotten into the classic transformers. He has asked for an original Optimus Prime for Christmas. I can’t bring myself to spend the money on an original 1984 model, but would like to know if the reissues from China (sample in the link) are quality products. I’m not looking for a masterpiece, but i don’t want something that will fall apart within a month or so. Thanks in advance for the helpOptimus Prime
A extensive retool of Lockdown, transforming into a Lamborghini Centenario. An exclusive to Walmart stores and part of the "Autobots Unite" subline, While almost the entire figure has been remolded, the lower legs and feet remain unchanged. The figure is overall a bit taller in stature than the base mold and includes extra steps in the transformation which further differentiate the two. Uncommon for deluxe class toys, the figure does not include any weapons or accessories.
As the two Titans battled, Optimus found Megatron watching the fight and demanded he assist them, but Megatron refused. When Trypticon swallowed the Enigma of Combination and took control of the Combiners, Optimus attempted to attack them as a distraction, but he was caught and the Combiners attempted to pull him apart. Optimus managed to break free of his captors and was further saved by the timely arrival of Megatron. Against Optimus's wishes, Perceptor returned and tricked Trypticon into swallowing the Matrix. Consumed However, this ultimately proved successful, and Trypticon released all that he had swallowed during the conflict before falling inert once again. The relief was short-lived, though, as Megatronus suddenly appeared before them, proving Optimus's fears. Optimus and Maximus attempted to surprise attack Megatronus, but he brushed off their blows and fired a beam through Optimus's chest, killing the Autobot once more. All Things Must Pass

Some time later, as the war raged between Autobots and Decepticons on Earth, Optimus had requested the Aerialbots as reinforcements from Cybertron. Though they nearly defected to the Decepticons, Optimus was able to secure the Aerialbots as allies. Later, when a power plant had to be evacuated of its human workers due to the fear of landslides, Optimus posted Denfensor at the location to secure its protection. Optimus then drove off to check up on the rest of his troops who were aiding in the area’s evacuation. Though he passed a military convoy heading towards a plant, he thought nothing of it, unaware that they were the newly created Combaticons in disguise. Optimus then reached the Ark, and from there opened communications with the Aerialbots. Optimus had someone come into the know that the Decepticons were moving in towards the plant. He watched from afar as Defensor and Superion fought Menasor and Bruticus, wary to send more Autobots into the fray while these titans wreaked havoc onto the battlefield. Optimus allowed himself a smile when the Aerialbots and the Protectobots proved themselves superior teams to the Decepticons’, though at the back of his mind, he was wary. After all, Megatron himself had chosen not to add his considerably weight to the battle... The Special Teams
Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.
This series introduced the dangerous Predacon faction, robotic dragons and mythical creatures that posed a threat to Autobot and Decepticon alike. In response, the 'Bots and 'Cons don new armor (the Autobots in spiky, over-weaponized armor reminiscent of Mad Max, while the Decepticons take on more beastly traits) and are armed with new gimmick-laden launching/spinning weapons. On-package bios were reduced in length to just a sentence or two, and the instruction sheets instead feature facts about one of the figure's main weapons, as well as a chapter of the Tales of the Beast Hunters prose story.

A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades.[113] In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist.[114] Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.[115]
Optimus Prime is also among the characters who appear in the flash game TRANSFORMERS CVBERVERSE Battle Builder Game.[21] Optimus Prime is one of the Autobots featured in Transformers: The Ride at Universal Studios theme parks. In the ride, Optimus fends off against the invading Decepticons at N.E.S.T. headquarters while telling Evac to escape with the AllSpark shard. He battles Megatron throughout the ride until Megatron is killed by Evac. Optimus then congratulates Evac and the riders for protecting the AllSpark.

Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, save for his head, which is only able to move up and down. Said head is also by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate, instead featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
I you can get an official reissue for around the same price, do it. I lucked out and got an opened but mint Encore for $50 last week but you'll be getting lucky that way. All Hasbro reissues have short smokestacks and long stacks are harder to get separate to swap out. Average price for a Japanese reissue is around $100 opened. If you are on a budget and the kid doens't care about slight issues, the $40 KO would be the better option.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.

Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.


There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
The Beast Wars raged on prehistoric Earth, eventually leading to the discovery of the buried Ark sometime after its crash on prehistoric Earth. Megatron, following his namesake's instructions in a desperate gambit, decided to attempt to change history by killing Prime, who was still lying in the Ark in stasis lock. Megatron hoped that this would result in the Decepticons winning the Great War and eventually Predacon control of Cybertron. Megatron unleashed a full-power weapon blast at Optimus Prime's face, near-fatally injuring him. The Agenda (Part III) However, Optimus Primal proceeded to take Prime's spark into his body to protect it from surgical trauma while his injuries were repaired. The subsequent power increase caused by Prime's spark's connection to the Matrix mutated Primal into a large, Transmetal "Optimal Optimus" form. Then, with the repairs complete, Prime's spark was restored, and he briefly activated before sinking back into normal stasis. Optimal Situation
The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.
Rodimus can be unlocked by beating "Dam 6" in Arena Mode, credited as Hot Shot. Rodimus is described as being young, impetuous, showing enthusiasm and confidence which borders on arrogance. He boldly claims that he has both skill and looks, though he is not too keen being paired with Kup on missions. Somehow, he became corrupted by Dark Energon. If the player manages to defeat him, he calms down, shrugging off the effects of the Dark Energon and returning to his regular self.
Categories: Character stubs missing fictionStubCharacter stubs missing video gamesAction MastersAlternity AutobotsArmada AutobotsAutobot leadersBeast Machines AutobotsBeast Wars AutobotsBeast Wars: Uprising AutobotsCloud AutobotsCombinersConvoysDimension hoppersDreamwave Generation 1 AutobotsEmperors of DestructionGeneration 1 AutobotsGeneration 2 AutobotsGeneration 2 Go-BotsGhostsGladiatorsGT charactersHall of Fame charactersHenkei! Henkei! AutobotsMatrix bearersMulti-component TransformersPowermastersPrimesRevenge of the Fallen AutobotsRulers of CybertronTransformers with three modesTransTech AutobotsUnited AutobotsZombies
Hot Rod identified the Decepticons on board through the damaged hull and immediately attacked the targets within using low powered, rapid fire bursts. When the Decepticons returned fire, Hot Rod changed tactics and began firing more concentrated blasts at the shuttle itself. Eventually, he managed to disable the shuttle. With their cover blown, Megatron ordered his forces to attack and the Decepticons began pouring out, beginning their planned assault on Autobot City. Before focusing his attention on the onslaught, an incensed Megatron destroyed the observation platform on which Hot Rod and Daniel were standing. True to his protective Autobot instincts, the first concern of Hot Rod was for the safety of Daniel. Quickly shielding the young boy, the two survived the platform collapse but were soon cornered by Blitzwing and Shrapnel. Timely intervention by the old and experienced Autobot Kup diverted the cannon fire from Blitzwing and allowed the three of them to escape.
As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
But around the mid-’90s, Hasbro let the trademark for a toy named “Bumblebee” lapse. At that point, the Generation 1 Transformers were almost passé, as they focused on the newfangled Beast Wars and Beast Machines lines. In fact the Unicron Trilogy continuity (mid-2000s) character called Hot Shot was originally going to be called Bumblebee, and in fact had a lot of Bee’s personality traits and yellow color, until they realized they couldn’t use the name. Fortunately, they got it back soon after.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
Later, Optimus pursued Megatron to Earth to stop him from pillaging the planet's energy resources. Prime's loyal team of Autobots clashed with Megatron's Predacons on many occasions, stopping their schemes with the aid of Koji, a human whose father had been abducted by the Predacons. Prime and Koji went on to form a strong friendship, although Prime blamed himself for Koji's father's abduction. Optimus proved his bravery on many occasions, battling and defeating Sky-Byte in an underwater duel and personally rescuing Side Burn from a Predacon trap. Later, when Megatron targeted a tanker truck to scan as the alternate mode of the final protoform, Optimus Prime leapt into action in order to save the truck's human driver and, as a result, the tanker, Prime and the human were all scanned. With an infusion of Megatron's spark energy to complete the concoction, Scourge was born, emerging from his pod as a dark twin of Optimus Prime. Prime's pleas to make Scourge remember his original Autobot loyalties fell on deaf ears.
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
This reissue of the original Generation 1 Optimus Prime figure comes in a two-pack with the Deluxe-Class Dark of the Moon Optimus Prime figure. Prime himself is almost identical to the Encore release, save for his trailer hitch which was retooled to allow a peg to be inserted within it while still being able to be inserted into the trailer itself (making it compatible with his G1 trailer and the new trailer included). Like the Encore release, he features lighter colors and tampographed shoulder symbols (which vary slightly from the Encore release).
A redeco of the first Sports Label Convoy, this figure transforms into a white, navy, and grey sneaker. Promotional images for the figure depicted its robot mode as white and aqua-blue, but the finished product was visibly darker, produced in shades of off-white and dark teal. In either coloration, it sure as heck looks like it should be Ultra Magnus, but for whatever reason... it ain't.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.

Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.

Released as part of the second wave of Clash of the Transformers subline imprint that's exclusive to Toys"R"Us stores, this Power Surge Optimus Prime is a redeco of the toy above, featuring transparent blue parts, white paint applications to the shoulder armor/front truck kibble, his chest, & leg/trailer striping to resemble his larger Power Surge Optimus Prime figure.
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.
In his first appearance in the series, Optimus looks similar to the original G1 Optimus Prime until he copies himself with a semi-truck and his design in robot mode changes. Soon after, he retrieves his Mini-Con partner, Sparkplug Witwicky. The cab of his truck mode detaches to form Optimus himself, while the trailer transforms into a battle station mode operable by Optimus and several Mini-Cons. Optimus can also combine with his base to form a "Super Mode" robot that, when combined with Sparkplug, can fire a series of powerful lasers. Additionally, Optimus can combine with Jetfire and/or Overload in his Super Mode for additional power.[10]
This release is a redeco of the Cyberverse Commander Optimus Prime figure, with a lighter gradient paint job that lacks the flames, and with Optimus sporting a G1 insignia. Instead of his jetpack and guns, he comes with his trailer/Armored Weapons Platform, which can transform into a base and exo-suit. The trailer itself features movie-style insignias.

This Collector's Edition Japanese e-HOBBY exclusive was a redeco of Targetmaster Kup, released in conjunction with the 2006 reissue of Kup and designed to represent the character Orion Pax from the Generation 1 television series episode "War Dawn". Orion transforms into a Cybertronic pickup truck and came with both a gun and Barrelroller, a redeco of Recoil. He has full shoulder rotation, though the way his elbows are set up means he cannot make full use of their joints. His legs feature no articulation whatsoever.

Optimus Primal, leader of the Maximal faction in the Beast Wars animated series and toy line, is not Optimus Prime. Primal is one of the Maximal descendants of the Autobots, who took the name to honor Optimus Prime. The same applies to the Megatron of this era. Before the animated series began, Hasbro envisioned Prime and Megatron as their beast counterparts, but once the animated series began, this had already been changed. Design elements, such as Prime's mouth-plate slitted to add an actual mouth for the animated series and the first mini-comic that came packaged with the toys, suggest this. Nonetheless, Optimus Prime and Megatron were a major reason the Beast Wars began, as Megatron's Predacon namesake traveled back in time seeking to alter history and insure that the Decepticons triumphed over the Autobots.
Optimus Prime was blasted into pieces by Dragon Megatron. Beast Wars Metals #5 Fortunately, his spark remained perfectly intact—in the remains of his Matrix-shaped spark chamber. Megatron was going to destroy Prime's spark, but Cheetor (now in his Transmetal body) saved it. Prime's spark was eventually swallowed by Optimus Primal, who was upgraded into Optimal Optimus by doing so.
This silver-chromed redeco of the Leader-class Optimus Prime figure first saw the light of day as a prize in a TV Magazine mail-in, offered alongside a gold chrome version of the same toy (see above). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (see below). Despite being offered in equal quantities in these contests, this silver version is apparently much harder to come by.
Rounding out a bumper year of Japanese-exclusive Generation 1 Optimus Primes, the Takara-licensed Kawada brand Diablock Convoy is a fully transformable Lego-style block building figure similar in premise to the earlier American Built to Rule sets. The Diablock figure, however, easily outstrips the Built to Rule sets by both being an accurate representation of the toy on which it is based, and being able to transform between modes without having to be partially disassembled and put back together first.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
Transformers GT "GT-R Prime" is a heavy retool of Alternity Convoy, transforming into a 1:32 replica of the Motul Autech GT-R race car used by the Nismo team in the Super GT racing championship series. He retains the flip-out blasters of the Alternity toy and can also wield his new Impact Wrench Gun accessory (also called the "Optimus Rifle" on the Transformers GT website), a weapon based on the impact wrenches used in car repairs. Like all GT toys, Prime also comes with a GT Sister, poseable human figures themed after race queens, his partner being a lady named Misaki.

A nice article but I see a few flaws. First of all if the distribution of LEGO sizes/prices is increasingly skewed it is better to either split the sample or look at medians or rolling medians than averages. Secondly, this is a perfect case to run a regression panel regression with time dummies to see both the impact of time and the impact of size on the prices.

After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.


This redeco of the Dark of the Moon Voyager Class Optimus Prime figure features a really unusual deco pattern consisting of red transparent tires, the vehicle front grill and fuel tanks (the fenders remained opaque red due to unpaintable plastic). Some of his parts like the vehicle front hood and the truck roof features a pattern similar to the ones used for the Tech Specs in the Generation 1 toys. He features a new sword and shield accessory, which can be used to decode the patterns.
Sure enough, in 2009, when the Hytherion's colossal claw-marks appeared on planets throughout the solar system, Prime's other-dimensional incarnation returned, bringing with him a "Vibrant Red" Vector 109 auto-avatar with which Prime fused. In that instant, he was reborn as part of the Alternity, a manifold being who encompassed all the different incarnations of Optimus Prime through the multiverse at once. Prime reached his hands heavenward and peeled back the layers of reality, exposing the gargantuan fanged maw of the Hytherion looming above the Autobots. From Here to Alternity
In this incarnation, Optimus Prime is the main protagonist and shows a near-xenophobic reluctance with interacting with other cultures, believing that such interaction would cause more harm than good. Consequently, he prohibits his team from mingling with the locals of Earth, Velocitron, and the Jungle Planet during their search for the Cyber Planet Keys. This attitude was drastically changed when Prime realized that the only way to acquire the Cyber Planet Keys from Velocitron and Animatros was to play by their laws.
Part of the first assortment of "Custom Kreons", this version of Optimus Prime comes with a buildable parts rack on which to hang/store his many many extra pieces. His tampographs are much more heavily-detailed than the original Kreons, based on the original Optimus Prime toy. His "normal" helmet (and small sword) are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens), plus a buildable large rifle, a buildable wing-pack, and a ray pistol (originally an Andorian blaster from Kre-O Star Trek).
Apart from this, Optimus Prime is also the weakest link of the gestalt combination, due to a number of design failures attributed to his torso mode. The square holes-and-tabs used to secure the arms together when in torso mode are too weak to remain locked in place (though a very small amount of copies can secure the arm well), and are prone to falling out of position should an attached arm be moved. The torso mode's skirt plate is also attached to the stomach rather than the pelvis, rendering the waist swivel nearly worthless due to the skirt obstructing articulation.
A second die-cast vehicle representing Prime was also part of the Mini Car Collection, this one a red redeco of Majorette toy #291, a Chevrolet K-10 pick-up. To distinguish it from the other Optimus vehicle, this one is randomly allocated the "Super Mode" label, and features an image of the leader in his powered-up form on is hood in addition to the Autobot symbol and series logo.

In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.


The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
×