The voice actor drama was written for OFTCC 2004 by Simon Furman, set after the events in the comics. Among those taken from their world via teleportation beam by Unicron and his Decepticon minions were Spy Changers Optimus Prime, Prowl, Ultra Magnus, and Ironhide. The Autobot forces opposing Unicron attempted to deflect a beam, leaving them all trapped on an uninhabited ice-world. The Autobot forces teamed up to overcome the Decepticons led by Reptilion. The Autobots were then, presumably, returned to their own worlds.
If Perceptor gave out the right amount of an antidote, the poisoned Autobots were cured. Optimus ordered his troops to ready themselves for the incoming squadron of Decepticons. Perceptor’s antidote did have a side-effect on the Autobots, however; it gave them a fierce battle-fever, making them eager to take on the Decepticons head-on. Prowl suggested to Optimus that they instead opt for a more conniving counterstrike against the Decepticons, and ambush them instead.
Upon discovering that the Matrix was the key to destroying Unicron, Optimus Prime and Ultra Magnus went alone to face Unicron while the rest of the Autobots executed the plan to restore the original timeline. They hoped that at least one of these plans would be successful. Prime was injured in the confrontation with Unicron and, although his injuries were not mortal, he passed the Matrix to Magnus, who shed his outer armor and managed to complete the mission, destroying Unicron.

For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.


If Sparkplug suggested that the Autobots remained in their vehicle modes, he would concoct a plan where the Autobots would help evacuate the entire town in their vehicle modes. With no more than four trips in and out of the city, Optimus and the rest of the team carried out the plan without incident. The Autobots then transformed and engaged the approaching Decepticons, whom they easily dispatched. With the city safe, the Autobots moved out to help their comrades at the Decepticon fortress.
A retool of Lockdown with a new head. He is a simplified toy that can auto-transforms from an unlicensed approximation of a Lamborghini Aventador rather than a Lamborghini Centenario LP770-4 into a Voyager-sized robot by pulling out the arms first, and then flip the figure over itself. He features articulation on his arms, and features 5mm compatible hands.
Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
This is a new line which features robot versions of various Marvel Comics superheroes (and later more of the Star Wars Transformers figures once it merged with this line). Confirmed figures are Iron Man, Spider-Man, Wolverine, Venom and Hulk. Hulk turns into a tank while Iron Man turns into a jet. Spider-Man becomes a helicopter, Wolverine turns into a 4WD, Venom turns into a turbocharged retro car. They are not to be confused with the Marvel Megamorphs toy line, which also featured transformable mecha piloted by the superheroes. Eventually, the Star Wars Transformers figure joined the line with reissues of previous figures, as well as all new molds.

During the May 30 launch event for the Revenge of the Fallen toyline in Japan, Legends Optimus were given out to attendees. The only difference is a sticker on the packaging commemorating the event. Optimus also saw release as a blindpacked figure for the first wave of the Revenge of the Fallen EZ Collection sets. And like all first waves, he comes with a flyer advertising the TakaraTomy releases of the Revenge of the Fallen toyline. His pair of legs is also mistranformed to fit in the bubble.


A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
Though Prime's ultimate fate is unknown, in a story entitled "The Last Days of Optimus Prime", also from Transforce, Prime laments the new Transformers age without war and passes on to a Transformers afterlife, referred to as "J'nwan". The story is vague, however, and may be a metaphor for Prime rejoining the Matrix, as his time had come. In this realm, he was approached by the Predacon Sandstorm, who tried to plead for the help of Prime and the other legendary Transformers in dealing with a Unicron/Predacon hybrid named Shokaract. Prime refused, but later led a group of Transformers, including Megatron, Grimlock, and Soundwave), to distract the creature while Primus dealt the final blow.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
In one Universe, Optimus led his Autobots against Megatron's Decepticons until the Cybertronian civil war led to the creation of the monstrous combiner Thunder Mayhem. Thunder Mayhem turned on his masters, ultimately leading to him rampaging across Cybertron. History The Decepticon Toxitron was made to resemble Optimus Prime as a blow to Autobot morale and also sported a cybermetric signature that matched Prime's. The Toxic Transformer

The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
The second Optimus Primal toy was an ape in the Ultra size class. Though the transformation from primate to humanoid was a relatively simplistic one, the toy compensated with more than a fair share of weaponry and action features. A compartment on his right forearm opened to reveal a skull-shaped mace he could hold in his fist. His left forearm could open into a double-barreled missile launcher. On his back were two spring-loaded missile launchers which auto-flipped over each shoulder. By pulling a lever in the center of his back, both arms would either spin at the bicep or bend in and out at the elbow, depending on the placement of notch-buttons located on either bicep. This gimmick was shown to be an effort to simulate a gorilla beating its chest while Optimus was in beast mode, but could also be used in robot mode, making him swing his weapons wildly before himself. And finally, like many first-year Beast Wars toys, a battle mask/"mutant head" could be deployed over his robot head.
Also during this time, Micromasters were introduced, and would become one of the last sub-groups of Generation One. Micromasters were tiny Transformers created to compete with the Micro Machines, a hugely popular toy line of the time. While many of the figures had simple transformations and little detail due to their small size, the line eventually expanded to feature Micromaster Transports and Bases, in which Micromasters came with larger vehicles or bases that transformed.

Aware of the changes to the timestream and the potential for the entire Autobot race to be annihilated by Unicron, Optimus put into motion Operation Distant Thunder, a plan to undo the damage to the timeline caused by Ravage, restoring the events that were seen in the movie. This would mean that saving all the Autobots from Unicron would result in Prime and others such as Prowl, Wheeljack, Ironhide, and Ratchet would die per the original events. They hoped they would be able to at least partially avoid such an outcome by sending a message to their past selves about all they had learned.

There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.

Mega Optimus Prime is a new larger-sized mold with the similar transformation scheme from the 3-Step Changer toy. It transforms from truck to robot in just 3 easy steps! His deco is based on his appearance in the season finale "Battlegrounds". He also obtains additional articulation on the arms, and sports connector ports for any Robots in Disguise (2015) Mini-Con figures.
Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).
Optimus includes an spring-loaded missile firing "ion cannon" modeled after Megatron's shotgun from Dark of the Moon, with the missile features a sculpted shotgun nozzle on the front section. It can be held in his hand or attached to the top of the truck cab or truck bed via 5mm post, and, in an unadvertised feature, sports tabs on the rear-most handle that allow the Dark of the Moon Voyager Class Megatron toy to wield it. Also undocumented is the fact that the weapon can be stored under either of Optimus' shoulders.
Optimus had Bumblebee and Huffer plant false information to mislead the Decepticons. As the Autobots were in need of a new power source, he sent Cliffjumper to find Doctor Heath Blaisedale and had to apologize to the doctor after Cliffjumper kidnapped her. Persuading her to help them, the Autobots traveled to the solar plant to make use of her solar reactor, only to find the Decepticons were already planning to attack it. While the other Autobots re-energized, Optimus protected them from an attack by Starscream, Thundercracker and Skywarp. Ravage abducted Blaisedale as a diversion, forcing Optimus to lead a team and rescue her. When the team returned, the plant was already under attack and Optimus helped the Dinobots drive them off. Unfortunately the Dinobots totaled the plant in the process, and Optimus promised Blaisedale the Autobots would help her rebuild. In return, Blaisedale organized a meeting with the President of the United States so the Autobots could forge an alliance. Sun Raid (Listen 'n Fun)
The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
Take note that the leg construction (thigh parts with legs consists of rear wheels/fifth wheel hitch & engine compartment/flip out legs combination) can become loose after a long time of play due to being used with transformation. Also, the legs did not seem to securely connect due to the hitch's shallow holes & the front half of the legs' small pegs. Also, attaching weapons with 3mm posts on the Battle Cannons' holes can cause some stress marks.
Rodimus gained the help of the criminal Witwicky family, believing they would help him learn more about Earth. After fighting Goldbug for leadership of the Autobots, he renamed himself Rodimus Prime. His first attack on the humans was to take control of the base controlling a human military satellite and use it to blackmail the humans into making him the leader of the world. The Decepticons were able to break into the base, where Heatwave used his ability to control machines to have the satellite fire on its own controls and then destroy itself.[16]
The set is a counterpart to TakaraTomy's simultaneously-available Transformers Animated Sons of Cybertron set, which also features translucent versions of that line's Deluxe Optimus Prime and Rodimus figures. It was intended as an exclusive for the Japanese Chara Hobby 2010 festival, but was also initially offered as a raffle prize at the 2010 "Autobot Alliance" event in the Philippines.,[1] and was later available for purchase at Cybertron Con 2010 in Shanghai.
Most notably in terms of new tooling, the panels on the undersides of Powermaster Optimus Prime's forearms feature slots under the fists, which allow the guns to tab in and be held much more stably than with Ultra Magnus. And due to the amount of empty space in the cab area in vehicle mode, Powermaster Prime can fully transform without the need to remove his head.
Takara's version of the figure was released in their markets slightly earlier, as the first of what would come to be several installments in their Masterpiece line. In addition to coming with a cardboard trailer that the buyer could assemble to "complete" Prime's truck mode, Takara's release differed from Hasbro's by featuring longer smokestacks (kept short on the Hasbro version for safety reasons, but incorrectly shown to be long in the stock photography shown at right), and lacking the black scorch-marked "battle damage" paint applications Hasbro included on the figure's shoulders, wrists and abdomen.

Early versions of this storyline featured Rodimus returning as "Rodimus Primal," a techno-organic Maximal with a form similar to Optimal Optimus'. This concept was discarded in favor of Rodimus working alongside Primal Prime, but was later adapted for a storyline feature in "Ask Vector Prime." In an alternate reality where Starscream had possessed Waspinator and brought a premature end to the Beast Wars, Rodimus Primal led the Wreckers as one of several resistance group's to Megatron's rule over Cybertron. Eventually, Megatron was overthrown by his rebellious generals Obsidian and Tankor, splintering the Vehicon force prior to the pair being abducted by Unicron. Without Obsidian's leadership, the Vehicons crumbled, and Rodimus Primal became part of a new Cybertronian ruling council that also included "Waspscream," Magmatron, and Mutant leader Icebird.
This gold vacuum metallized version of Optimus Prime is a prize in Hasbro's Asia Age of Extinction campaign. To qualify for winning this toy, one must be the biggest spender of the day during the midnight launch of the AoE toyline at specific Toys R Us or participate in a lucky draw. This toy is limited to 7 pieces. 2 are in mainland China, while Hong Kong, Malaysia, Thailand, Singapore, Taiwan each have one.
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.[4]
Optimus Prime has appeared in numerous video games since the introduction of the Transformers series. He makes a cameo in the 1999 Beast Wars Transmetals video game for Nintendo 64, where he is killed by Megatron at the end of the campaign, showing what would have happened in the Beast Wars series with a Predacon victory. Prime is also one of the playable characters in the 2003 Japan-only Transformers game for the PlayStation 2 and the 2010 Transformers: War for Cybertron. Optimus Prime is also playable in the Hasbro Net Jet Transformers fighting game Transformers Battle Universe. Three versions of Optimus Prime are playable characters, including the first generation incarnation, his incarnations from the 2007 live-action film, and the incarnation from Transformers Animated. In this game, Optimus Primal is also a playable character. He is a regular character in the Nintendo GameCube and PlayStation 2 2003 fighting game DreamMix TV World Fighters. He appeared as a boss in a simple Flash-based video game on the Hasbro web site.[25]
Available exclusively from Japanese 7-11 stores, MP-711 is an Ultra Magnus-decoed Convoy—white with green and blue highlighting—themed with 7-Eleven logos. Unlike most MP-10 redecos, he comes with a trailer, Roller, and Spike figure, who is sporting a 7-Eleven uniform. Roller and the combat deck come with 7-Eleven logos, however Convoy's shoulder logos are stickers with the option of a green 7-Eleven logo or the standard Autobot logo on either shoulder.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.

A redeco of of the Cyber Commander toy above, this Prime features grey plastic replacing the original blue, some deco differences on the arms, body & legs. He also features a flame tampograph on the sides of his vehicle front. He comes in an altered packaging that replaces the first version's painted prototype stock photos with CG renders depicting the new deco, and also features a new Hasbro product code number, thus making him officially a separate product rather than a drastic running change variant.

Kabaya's second candy toy of Energon Optimus Prime was released as part of the Hyper Transformers series. This non-transforming figurine depicts Prime in his lesser-seen combined mode with Wing Saber: "Fight Mode", as Hasbro called it, or "Cannon Mode" in Japan. The figure's shoulder cannons came on a separate sprue in-package and had to be removed by the buyer. Prime's head can be removed and attached to the Hyper Transformers Omega Supreme figure, creating Optimus Supreme. As a candy toy, Prime came with a stick of gum.


This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
A giant statue of Optimus Prime in front of the Cybertron Archives holding two Golden Disks appeared on Cybertron in the Beast Machines series, but was destroyed by the Vehicons in the episode Fires of the Past. When show writer Bob Skir was asked what these two disks were he said that neither the statue nor disks were in the script, but he suggested that they were either the disks from Voyager 1 and Voyager 2 probes or that Optimus won them in the 2,395,989th Annual Cybertronian spelling bee.[7]
Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.

EZ Collection Gum Convoy is another redeco of Generations Legends Class Motorbreath, featuring the retooled parts, but this time omitting the sword. He is decoed once again in his Generation 2 colors (see above), with the black legs, but uses metallic red plastic, and is coated in metallic red, blue, and black paint. As per the toyline's name, he comes with a yellow candy-shelled piece of lemony-flavored gum.
I had a transformers armada (ew) style Megatron with horns like a stag beetle that would turn into a tank. I actually liked the whole design and was upset when my sis broke it on purpose. She'd always tell on me for stupid shit so I saved this incident as a trap card for later. Too bad this sort of thing had a statute of limitations in our house lmao.
Prime: First Edition Matrix of Leadership Optimus Prime converts from robot mode to his truck mode. He comes with a gun than he can wield with his hands, as well as peg onto his hitch in vehicle mode, with different pegs for either configuration. Similar to a previous Optimus Prime toy, he features some faux-kibble in the form of his actual windshield chest being covered by sculpted panels featuring his characteristic windshield-chest. His arms are slightly longer than his original design's arms.

Prime's firing missile and Mini-Con activated gimmicks remain accessible in this mode, but look a bit doofy if you deploy them. The initial Hasbro release of Prime had tabs in its Super Mode shoulders that prevented them from rotating above the horizontal default position, so as not to break the wires that run through the toy's right arm. Coupled with the limited elbow joints, this left Optimus Prime able only to point his weapons towards the ground, and the tabs were removed on subsequent editions of the figure.


We're sure we're not telling you anything you don't already know when we say that Hot Wheels are miniature die-cast cars with dynamic multi axular momentum technology (ie, they roll). They are usually based on real-life production cars but sometimes are modeled after bad acid trips, with wheels added later (for the rolling). Shortly after the introduction of the cars, Mattel launched various tracks to take full advantage of the cars' rollability.
Part of the first wave of battle upgrade Hero Mashers toys, Optimus is a non-transforming robot who can swap any of his parts out with other Hero Mashers figure to create many combinations. He includes his iconic Energon axe, a large projectile-launching gun, another large gun, two missile packs, and an arm for Ultra Magnus. Optimus Prime also has a pointing right hand, which allows you to do a certain Optimus Prime pose in a Dreamwave Productions comic.
Optimus Prime appears in the prequel novel Transformers: Ghosts of Yesterday, where he and a group of Autobots travel in the Ark searching for the Allspark, battling Starscream's Decepticons along the way. While going through a worm hole, the Autobots find themselves encountering a group of humans in a spacecraft reverse-engineered from studying Megatron. With this discovery, Prime realizes the significance of Earth, as both Megatron and the Allspark are there. After saving Bumblebee from a pit of rock-chewing cave worms, Prime battles Starscream. He is about to be gunned down by Starscream and Bonecrusher when he is saved by the human craft. In retaliation, Starscream obliterates it.
Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
Battle Blades Optimus Prime is a brand new sculpt that attempts to replicate his Leader Class design. He is much more movie accurate than the previous Voyager incarnations. He features two energon swords made of soft plastic, similar to his Leader Class incarnation, albeit not spring-loaded. They can be detached from the mushroom joints they're on, although doing this excessively may cause them to warp.
Takara's iteration of Combiner Wars Optimus Maximus is sold in a gift set including all five Autobots (minus the Rodimus mold). This version of Convoy has numerous changes in deco to better match his look in the Generation 1 cartoon. Like Unite Warriors Menasor, the set also features some minor improvements to the original sculpts, such as improved hip-ratchets for Convoy for increased stability. He also had the slightly modified pegs that Legends Class Rodimus (or Blackjack, Runabout, and Runamuck) can securely attach to, which was previously used for Battle Core Optimus Prime. While he features foil insignia stickers on his robot mode shoulders, he also features tampographed Autobot symbols on his side truck panels.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
The figure also comes with two gun accessories, the "Eliminator Gun" and "Assault Blaster", which combine into the "Mega Striker", a rifle that closely resembles the one used in Dark of the Moon. The separate guns also have a MechTech-style transformation, and pulling a lever transforms them into alternate crossbow-like shapes. In "battle vehicle mode", the sides of the truck are rotated up, and the guns can be attached by small pegs to holes in the modified smokestacks, or they can plugged into any of the standard connection points with their 5mm posts... except the ones on the hinge behind the cab, since those are supposed to be for his Energon battle blades.

The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.

Stewing in a cell, Optimus blamed himself for their predicament, but he and the Autobots were soon rescued by Broadside and Sandstorm. Sandstorm and Optimus traveled through Cybertron's Old Slave Trails, only to find themselves ambushed by Runabout, who swiftly killed Sandstorm, and then the Decepticon was attacked by a Sharkticon, which lunged at Prime. Cold War Prime recovered to find himself in the care of a group of Autobot rebels including Hot Rod, Blurr and Kup. Though Optimus lashed out at Gnaw upon awakening, the other rebels quickly cleared up the misunderstanding, assuring Prime that the Sharkticon was their ally. They revealed to Optimus that Shockwave had been transmitting subliminal signals to increase Transformer aggression, readying them for war against an unseen foe. At this point, another rebel cell joined up with them with dire news: Shockwave had unleashed the Omega Sentinels on Iacon! Passive Aggression


Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game.[28] As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".

After the events of Transformers Animated the Stunticons set up a Stunt Convoy show in the city of Kaon and use it as cover to attempt to break Megatron out of his detention at Trypticon. Their attempts are thwarted thanks to the efforts of Cheetor, Optimus Prime, and Sideswipe. The Stunticons are placed in detention with Megatron and an attempt to rescue them was made by the Decepticons Blot, Mindwipe, Oil Slick, Scalpel, Sky-Byte, and Strika.[143]
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.
The only differences with the unreleased version, aside from the packaging, are that silver paint has been added to the previously unpainted grill/fender area, the blue paint operations have been changed to teal, and the red Autobot insignias have been replaced by purple Decepticon ones. Prime's bio apparently explains that he took on this new color scheme in order to infiltrate the Decepticon ranks, in response to recent attacks by some new Decepticon forces pretending to be Autobots.
Each arm features flip-out blades that trigger when a button on the forearm is pressed. Each of these blades has a Cyberglyphic symbol on it. The blades severely restrict Prime's arm articulation when retracted, as they get in the way of the kibble, but as there is very little one can do with Prime's arms without causing the blades to deploy, this is hardly noticeable.
(As an odd postscript to this tale of footwear-induced madness, although the promo pictures all showed the shoeformer as a white and navy blue sneaker that transforms into a white and aqua blue robot, the product actually released sported much darker colors for all the robot-mode parts, with a deep teal instead of aqua, and almost all the white replaced by an icky tan/cream/grey color, including the head. Basically, the figure looks like the promo picture viewed through really dark sunglasses. Although this certainly doesn't make it look any more like Prime, you might argue that it looks a little less like Magnus. Sorta. Maybe. Not really.)

A retool of Lockdown with a new head. He is a simplified toy that can auto-transforms from an unlicensed approximation of a Lamborghini Aventador rather than a Lamborghini Centenario LP770-4 into a Voyager-sized robot by pulling out the arms first, and then flip the figure over itself. He features articulation on his arms, and features 5mm compatible hands.
This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
×