Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
I had a transformers armada (ew) style Megatron with horns like a stag beetle that would turn into a tank. I actually liked the whole design and was upset when my sis broke it on purpose. She'd always tell on me for stupid shit so I saved this incident as a trap card for later. Too bad this sort of thing had a statute of limitations in our house lmao.
Prime's firing missile and Mini-Con activated gimmicks remain accessible in this mode, but look a bit doofy if you deploy them. The initial Hasbro release of Prime had tabs in its Super Mode shoulders that prevented them from rotating above the horizontal default position, so as not to break the wires that run through the toy's right arm. Coupled with the limited elbow joints, this left Optimus Prime able only to point his weapons towards the ground, and the tabs were removed on subsequent editions of the figure.

Optimus Prime also appears in Transformers: Rescue Bots, stated to take place in the same universe as Prime, as the leader of the Autobots who transforms into a semi-trailer truck, though unlike his Prime appearance, it's flatnosed like his G1 counterpart. He gave the Rescue Bots their mission and mainly appears mainly via view-screen, appearing physically in the first episode and then in the first-season finale, where his truck mode is seen for the first time on screen. He then returns, with or without Bumblebee, many times throughout the second and third seasons as a recurring character. In the episode "Land Before Prime," Optimus Prime arrives on Wayward Island to help the Rescue Bots. He scans Trex as a secondary form where gains a Tyrannosaurus form, making him a Triple Changer, though he states that scanning anything techno-organic might have unpredictable results. While he loses control of this "Primal Mode" at first, the Rescue Bots determine that his loss of control is due to low Energon reserves, and are able to replenish his energies and restore him to normal using an energon patch. At the conclusion of the third season, Optimus helps his old friend, High Tide, along with the new recruits, Blurr and Salvage, save Griffin Rock and subsequently sends Heatwave and his team on a new mission to use the island as "testing place" to reveal their true identities as aliens.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.
Optimus later led a convoy in search for a building site for Autobot City, which ran into a Decepticon ambush. Rodimus Prime remembers the Transformers greatest battle on Earth. He sent off several Autobots to get help, knowing this was the only chance of victory. Transformers Combat Data Those several Autobots were seen again, but Prime... wasn't.
Accompanied by Prowl, Optimus went to Sumatra and discovered much of the jungle had been destroyed. The Decepticons tried to destroy the Brazilian jungle and take its oil, but once again the Autobots stopped them. Storms of Destruction Following a battle between the Dinobots and the Decepticons, Optimus ordered Slag be repaired by Ratchet at their Antarctic oil supply. Tracking Slag, Megatron attempted to destroy the base with the Crusher, slicing icebergs off the continent. Optimus ordered Autobot superjets to counterattack, but the battle was won when Megatron unwittingly reawakened hundreds of dormant Dinobots beneath the ice. Jaws of Terror Optimus and Prowl were baffled by Megatron's next strategy, a series of hit-and-run attacks in the Pacific rim. It emerged it was a distraction from the enslavement of the population of Buru. Optimus, Prowl and the Dinobots arrived and fought off the Insecticons, foiling the scheme to drain the island's oil. Slaves of the Insecticons When Megatron planned to drain the world's largest supertanker, Optimus had the oil tainted with a corrosive acid, sabotaging the Decepticon submersible. The Autobots flew the tanker to New York City, and ordered the few witnesses' memory to be wiped. Wow. Attack of the Decepticons
The term Generation 1 is a retronym; the series was simply known as "Transformers" until the release of the Generation 2 series. However, the term has become semi-official, as both Hasbro and Takara have referred to this era as "Generation 1". New characters are still occasionally added to the line, primarily by E-hobby. (Examples: Sunstorm, Hauler, Detritus, and the like.) Large-scale production of new characters in this line ended with the onset of Generation 2. Transformers fans often are very upheld with the G1 community. This has led to controversy among fans who consider G1 to be the only "pure" form of Transformers.
The seldom seen 5th season re-airing of the show featured the G1 episodes retold by a stop-motion Powermaster Optimus Prime to the live-action youngster Tommy Kennedy. Although no back story was ever provided for how Prime became a Powermaster, the new sequences are said to take place after the four previous seasons. This indicates that Prime became a Powermaster in the original Sunbow continuity.
The first commercialized yo-yos in America were sold in vast majority by entrepreneur Donald Duncan and children couldn't get enough of them. The design was elementary: two wooden or plastic discs, connected by an axle with a string tied to it. To keep the user from flinging the yo-yo comically through the nearest window pane, the string featured a tiny finger loop at the opposite end. A loop that, as we all remember, tightens relentlessly with each toss until the finger tip is a healthy shade of purple.
French die-cast model producers Majorette teamed with Kabaya to produce the Transformers Mini Car Collection, a line of Armada-themed die-cast vehicles, all of which were redecos of pre-existing Majorette toys. Prime was a redeco of Majorette toy #256—a long-nosed tow truck—in his traditional red and blue, now bearing the Autobot insignia, the Micron Legend logo, and an image of the Autobot leader on its hood. The toy came with a pack of gum.
A movie tie-in game for the sequel to the 2011 movie Transformers: Dark of the Moon was released a few weeks prior to the movie on June 14, 2011 (the movie is set to be first screened on July 1, 2011). It has similar gameplay and features as that of the War for Cybertron game as it's made by the same developers, High Moon Studios. The game takes place on Earth just two years after the events of Revenge of the Fallen and will focus on both factions in their "final battle". Adjustments to the previous concept of the game had been made, including the online multiplayer where you can customize iconic characters appearance, abilities and weapons rather than the unknown transformers that were in the game prior to this one by High Moon Studios where you could only customize the appearance, abilities and choose the weapons.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.

The figure seems to have some transformation scheme & design related problems in it: The front truck cab's upper two pieces are supposed to be pushed to the front in robot mode, but the piece keeps collapsing back due to looseness when the figure is standing straight (Though pressing the two halves together firmly tends to reduce this issue for a while), while the tab underneath the truck grill does not connect well with the bottom port. Additionally, his 5mm compatible hands have a slight problem with wielding weapons with short 5mm posts.
Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.
Equipped with knowledge of the future and the danger that would soon be threatening the transformers, Ravage's machinations included trapping Megatron and a large army of Decepticons in a spacial rift with the intention of protecting the Decepticons from the approaching Unicron and forcing the Autobots to face the planet-eater unaided. The Decepticons would then be in a position to conquer the victor of that battle.
Aware of the changes to the timestream and the potential for the entire Autobot race to be annihilated by Unicron, Optimus put into motion Operation Distant Thunder, a plan to undo the damage to the timeline caused by Ravage, restoring the events that were seen in the movie. This would mean that saving all the Autobots from Unicron would result in Prime and others such as Prowl, Wheeljack, Ironhide, and Ratchet would die per the original events. They hoped they would be able to at least partially avoid such an outcome by sending a message to their past selves about all they had learned.
Optimus Prime returns in Transformers: The Last Knight, which is set three years after the events of the previous film. Having been frozen in the vacuum of space, Optimus has been drifting on the far reaches of Earth's solar system for some time. However, he later crash-lands on Cybertron, its atmosphere reviving him. He then confronts the being currently in control of the planet, a powerful sorceress named Quintessa, who professes to be the maker he is searching for. Optimus is easily subdued by Quintessa, who convinces him that he destroyed Cybertron and reveals that the Earth is actually Cybertron's "ancient enemy" Unicron. Redubbing him "Nemesis Prime", Quintessa brain-washes Optimus and tasks him with retrieving her stolen staff, with which she plans to drain Earth/Unicron's life force so that Cybertron can be restored. Nemesis succeeds in retrieving the staff, but is hindered by Bumblebee, whom he engages in a fierce duel. Nemesis nearly kills Bumblebee, but when the normally mute Bumblebee suddenly speaks, urging Prime to remember who he is, the sound of his oldest friend's voice is enough for Optimus to return. However, Megatron, revealed to be in league with Quintessa, swoops in and steals the staff from Optimus. Prime is then attacked and sentenced to death by the Guardian Knights for aiding Quintessa, but he is saved by Cade Yeager, who convinces Optimus to correct his mistake. Optimus leads the Autobots in the attack on Quintessa's lair, during which he slays the Infernocons and defeats Megatron. Optimus then attacks Quintessa, distracting her long enough for Bumblebee to shoot and seemingly vaporize her. At the end of the film, Optimus and the other Autobots return to Cybertron, unaware that Quintessa is actually still alive.
This Classics Optimus Prime is a smaller, Deluxe Class figure with a noticeable physical resemblance to Takara's Robotmasters Prime figure, and a transformation that is about as successful. The figure is armed with a tommy gun-shaped laser rifle that transforms into a turret-like configuration and mounts on the rear of his truck mode, and features a spinning "power punch" action that sees the whole upper half of his torso spin when a button on his back is pressed. Pressing the button "unlocks" the spinning mechanism; pull hard on the button, and you can lock the torso back into place.
The internet can be blamed for the size and scope of the secondary LEGO market. On the website, BrickLink, you can find almost any set that LEGO has ever produced. In addition, the site keeps records of trends in the market and value of individual pieces. This site is invaluable to a LEGO collector and has given many the ability to grow their collections. Before the advent of this site and sites like eBay, collecting LEGO required going to garage sales. There are now whole sites dedicated to buying LEGO as an investment, but that is a topic for another article.

1 is the TF/ Evangelion crossover edition of MP 10 Optimus Prime. Honestly Im not familiar with Evangelion but OP in purple and green is just sick. 2 is the MP version of Sideswipe, but Takara calls him Lambor. 4 is the "marlboro edition" Diaclone repaint of MP Wheeljack. It was supposed to be released in March, but Phillip Morris blocked its sale in the U.S. bc they suck. Luckily my homeboy /u/dajoeker was able to help me get a hold of one.
In 2007, the Optimus Prime of universal stream Primax 109.0 Beta encountered a mysterious messenger from another world: another incarnation of himself from a parallel dimension who left him with a warning. Two years hence, Megatron would bring the terrifying super-dimensional lifeform known as the "Beast of Time", the Hytherion, into their dimension to destroy Earth. The only thing that could battle the Hytherion was the power of the super-evolved multi-dimensional race of Cybertronians known as the Alternity. Prime agreed that when the danger appeared, he would join the Alternity in the fight.

Released as part of a new line called Transformers: Tribute, Orion Pax is a redeco of Titans Return Sergeant Kup, and transforms from a red-and-blue Cybertronic pickup truck which is also an homage to Generation 1 Crosshairs's vehicle mode G1 Optimus's e-HOBBY toy. His Titan Master, retooled from Flintlock, features a new face that is based on the Thrilling 30 Orion Pax toy. As a redeco of the Kup mold, Orion Pax still suffers the leg panel misassembly.

This Wal*Mart-exclusive two-pack pairs the deluxe-size Classics Optimus Prime figure with live-action movie line's Fast Action Battlers Power Hook Optimus Prime toy. Both toys are identical to their original releases, and together represent the Optimus Primes of the oldest and newest generations (at the time) of Transformers, respectively. The movie Prime is designated "2007 Optimus Prime", while the Classics figure is dubbed "1984 Optimus Prime" (referring not, of course, to the toy, which was produced in 2006, but to the character).


This Japanese exclusive release of Optimus Prime features much more black coloring than the previous releases, and it's (coincidentally) based on the Fast Action Battlers Power Armor Optimus Prime toy, so as to be used with the similarly-repainted Legends Jetfire figure to form the Optimus' powered up combination. For some reason, he has red eyes. This redeco also uses the slightly small fuel tank/elbow tabs from the Battle Damaged release.
On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial
Part of TakaraTomy's Movie Advanced Series lineup, Revenge Optimus Prime is redeco of the 2010 Transformers Battle Blades mold, featuring darker plastic, a pair of flip-out swords (the first release of this mold) from the Hasbro release, and chromed fuel tank-guns & sun visors. His shins & wheel joints are bronze from the Hasbro release as opposed to the grey of Takara's Autobot Alliance release.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.

The "Underbite Jetpack Takedown" Optimus Kreon uses the new 2015 style of Kreon hips and torso, with a hollow hip-peg and a central post inside the torso for increased grip... which also makes them incompatible with about four years' worth of Kreons. Based on his appearance in Robots in Disguise, he features a new version of the Optimus helmet, this time lacking a moutplate. He attaches to an included jet pack, armed with two pressure-launch missiles.

Optimus was one of the many soldiers fighting under the command of the Autobot leader, Jetfire. He was among the Autobots who launched in the Ark to clear a path through an asteroid belt. When the Decepticons attacked the ship, he fought a Seeker Decepticon while Jetfire sent the Ark crashing into Earth, knocking everyone aboard offline. Four million years later, they were repaired when the ship's systems were reactivated by a volcanic eruption. In the Transformers
Optimus dueled Megatron atop of an overpass in a human city. Though he managed to knock Megatron's cannon loose early in the scuffle, Megatron managed to turn the tables on the Autobot leader, reattach his primary weapon, and blast his old foe. When Megatron moved in for the kill, Optimus got his second wind, and knocked Megatron clear off the overpass. They were always real to me.
Optimus later led a convoy in search for a building site for Autobot City, which ran into a Decepticon ambush. Rodimus Prime remembers the Transformers greatest battle on Earth. He sent off several Autobots to get help, knowing this was the only chance of victory. Transformers Combat Data Those several Autobots were seen again, but Prime... wasn't.

Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.


Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.
Bumblebee - The Transformers live action film franchise's latest installment is out, with Bumblebee hitting theaters last week. The Seibertron.com Twincast / Podcast brings you its review of the movie, with one of its regular podcasters Jon Bailey bringing his insights after providing the voice acting talents for Soundwave and Shockwave in the film. Along with this insider perspective, the cast discusses each significant part of the movie itself, beginning with the "Generation One" inspired opening scene on Cybertron. The new human and robot characters presented in the Earth based adventures are also reflected on, with the cast agreeing that this latest movie is a measurable tonal departure from the approach of previous films in the franchise. After talking through the entire movie's plot and characterizations, speculation about what comes next for Travis Knight, Michael Bay, and the Transformers live action movies comes next. A quick chat about the movie's tie-in toyline follows, and the show concludes with a quick round of holiday season bragging rights about the cast's Transformers related gifts.
While Beast Machines was still running in Canada, Japan's Takara made a bid to return to the familiar vehicle-transforming robots concept. In 2000, Car Robots was released. This line was brought by Hasbro to America as the Robots In Disguise series, and featured the Autobots facing off against the Predacons. This series is usually regarded by most as filler while Hasbro contemplated the next direction for Transformers. However most fans of Transformers recognise that most if not all of the toys released from this line were of excellent quality (with the Optimus Prime and Ultra Magnus figures gaining considerable praise), combining the ball-joint articulation with detailed, well painted alternate modes.
Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
First Edition Optimus Prime is, as his title suggests, the first toy available to the public from the Age of Extinction toy line. Prime is an all-new Leader Class-sized figure, featuring his new Western Star "5700 OP" concept truck vehicle mode and his updated robot mode from the film (well, mostly based on his initial design rather than the final design in the movie). His transformation is much simpler than his counterparts from the previous three movie lines, being billed as transforming in "15 easy steps." His torso, shoulders, upper legs, and the vehicle mode grill are all completely chrome with the exception of minor blue and red details painted on his chest. However, this comes at the expense of his smokestacks and wheels being bare gray plastic, whereas they are chromed in the film. His simplified transformation also comes at the expense of having a very bulky "backpack" of kibble composed of the rear of the truck cab and the fuel tanks, limiting his shoulder and hip articulation. However, his Truck kibble can be detached from the main figure to form the majority of his vehicle mode on its own.
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
A Deluxe-sized figure sold only in Japan and Asian markets by Takara Tomy. The package consists of a highly poseable skeletal frame called a Core Body, along with parts to assemble the Core Body to either a Protoform mode or robot mode. In Protoform, the figure can transform into an atmospheric Entry Mode. The figure with robot parts is able to fully transform into vehicle mode.[87]
If you’re a child of the ‘80s and grew up with the original The Transformers cartoon, Bumblebee may have been the second Transformer you ever saw-- in the narrative of the show, anyway. In the first episode, “More Than Meets the Eye,” you would’ve started off by watching the memorable opening sequence. There, you first get a quick glimpse of a group of five Autobots in vehicle mode, including Bumblebee alongside Optimus Prime.
In robot mode he resembles previous Optimus characters: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Not long after his resurrection, Optimus was alerted by Monitorus to an attack on Tau-Ursa. Optimus's impending speech was interrupted by a Decepticon attack led by Sixshot. Prime soon discovered that the attack was a diversion, while Galvatron tried out his Nullification Cannon on Cybertron's Energon supplies. Optimus rushed to the Energon plant, but, after clouting Slugslinger so hard that the Decepticon was left dangling over a precipice, Prime's morals forced him to rescue the Decepticon instead of stopping Galvatron from getting away.
In the wake of this incident, the transformers managed to reclaim much of Cybertron. Mindful of the dangers of allowing humans like Cobra access Cybertronian technology, Prime sent Perceptor, Grimlock, Arcee, and Bumblebee on a mission to Earth. As it turned out, Prime's fears were well founded. The U.S. government had used parts from Megatron to create Serpent O.R., a cyborg designed to be a perfect weapon. A raid by Cobra allowed it to escape and gather an army of Decepticons on Cybertron, killing Bumblebee in the process. Despite the grief of losing Bumblebee, Prime continued on and rallied his comrades to do the same. Attacking the Autobot capital city, Serpentor's forces proved overwhelming, and Prime surrendered to ensure the Decepticons would cease fire and not kill another comrade. Realizing that Serpentor wanted the Autobot Matrix of Leadership, Prime broke free as Serpentor was distracted, but was unable to kill him. He was promptly attacked and nearly beaten to death by Razorclaw and Motormaster. He was subsequently forced to watch as Serpentor opened the Matrix. In doing so, Serpentor was not only reformatted into a transformer-like mechanoid, but was also shown the futility of the fighting by the Matrix. At this point, Cobra Commander was able to take control of Serpentor's body. In an attempt to stop him, Hawk opened the Matrix and was transformed into a great leader, rendering Cobra Commander comatose. As the Joes prepared to head home, Prime promised to record the Hawk-led humans' future.
Part of the first wave of battle upgrade Hero Mashers toys, Optimus is a non-transforming robot who can swap any of his parts out with other Hero Mashers figure to create many combinations. He includes his iconic Energon axe, a large projectile-launching gun, another large gun, two missile packs, and an arm for Ultra Magnus. Optimus Prime also has a pointing right hand, which allows you to do a certain Optimus Prime pose in a Dreamwave Productions comic.
The mid-range Voyager class Movie Optimus Prime toy transforms into an amalgamation of the Kenworth W900 and the Peterbilt 379, making this toy fairly inaccurate to the actual vehicle Optimus Prime turned into. Because of the smaller size and lessened complexity, the Voyager class Optimus Prime features a significantly different transformation sequence compared to the Leader class toy, and indeed, the actual CGI design. However, as the actual truck cabin no longer forms his chest, the cabin now features a small interior with opening doors and a non-removable cowboy-hat-bedecked driver figurine that flips out of the seat when the driver's side door is opened.
Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.
×