Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.
This series introduced the dangerous Predacon faction, robotic dragons and mythical creatures that posed a threat to Autobot and Decepticon alike. In response, the 'Bots and 'Cons don new armor (the Autobots in spiky, over-weaponized armor reminiscent of Mad Max, while the Decepticons take on more beastly traits) and are armed with new gimmick-laden launching/spinning weapons. On-package bios were reduced in length to just a sentence or two, and the instruction sheets instead feature facts about one of the figure's main weapons, as well as a chapter of the Tales of the Beast Hunters prose story.
The most controversial line of this period was the Pretenders. Pretenders consisted of a Transformer contained inside an action figure shell who could "pretend" to be either a human or a monster. Complaints with this line were numerous, including the lack of articulation of the figures (the shells could only move their arms), the simple transformation of the robots within, and their increasing lack of resemblance to any sort of modern recognizable vehicle. Still, despite the complaints, the Pretender line continued through all but the final year of Generation One, with variations such as Beast Pretenders, Monster Pretenders, Classic Pretenders, Mega Pretenders and Ultra Pretenders, each with variations on the theme or increasing levels of complexity.
A Japanese exclusive, this is a new line of Transformers toys shaped from Disney characters that were first introduced in 2009. Originally revealed in the November 2008 issue of Figure Oh! Magazine in Japan, it was a collaboration project between Takara Tomy and the Walt Disney Company. The first line of the toy series is the Mickey Mouse Transformer which was modeled after Optimus Prime with the same colors as its Transformer counterpart and can transform into a cartoonish trailer truck like the original version. The toy was released on February 26, 2009 following with the Black and White Version a month later on March 26, 2009. A figure of Donald Duck based on both Bumblebee and Herbie the Love Bug, and a second repaint of the Mickey Mouse trailer in Halloween colors, are also planned for release.
In Another Light, Rodimus finally assumes total control over the Autobots upon Optimus Prime and several of his closest loyalists being jettisoned into space and left near death following the Battle of Decepticon City. However, his reign came to a swift end when the group returned, having been reformatted into the Knights of Unicron. The heroically reborn Optimus, now known as Nova Prime, engaged his usurper in battle and defeated Rodimus, sending him plummeting into Cybertron's depths. However, Rodimus then encountered the malevolent Primus, who enlisted his aid and that of other "true Autobots" in ridding his surface of those he considered vermin-namely, all Decepticons and Autobots not loyal to the same cause. This would lead to an epic battle between Primus' minions and the heroic Transformers of their universe: Galvatron's Decepticons, Nova Prime's Autobots, and a group of Maximals created from Classics Autobots.

Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[50] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
Featuring a complex transformation, essentially the front and back ends of the truck fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his pricepoint has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, held in place by a simple clip.) Optimus' final Automorph, located in his torso, is activated by flipping the silver lever on his stomach activating a series of spring-loaded actions where the truck windows are pushed apart, and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
After their own Optimus Prime disappeared, Scavenger and Smokescreen discovered an alternate version of Optimus Prime lying unconscious and barely alive in Autobase Earth. Though Red Alert did what he could, the mysterious Prime reactivated only long enough to utter a cryptic statement about the walls crumbling and the coming of chaos, then died. Worlds Collide, Part 1 of 4
Based upon the "Protoform" (Cybertronian) appearances of the Transformers in the Movie, Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. A flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail. The bottom of the vehicle has small wheels to roll the toy across smooth surfaces. Oddly, it has NO automorph gimmick at all, a feature most main-line figures have.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.

LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
Being only an inch and three quarters half, he is the second smallest transformable movie version of Optimus Prime around, only losing the first spot to the Q-Transformers version. Much like the normal-colors Bumblebee, he was available in both Series 1 and 2 of the line, with no noteworthy changes between releases. Not even their bag codes were altered. Their instruction books were updated to say "Series 2".

On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.
Rodimus can be unlocked by beating "Dam 6" in Arena Mode, credited as Hot Shot. Rodimus is described as being young, impetuous, showing enthusiasm and confidence which borders on arrogance. He boldly claims that he has both skill and looks, though he is not too keen being paired with Kup on missions. Somehow, he became corrupted by Dark Energon. If the player manages to defeat him, he calms down, shrugging off the effects of the Dark Energon and returning to his regular self.
Part of the first wave of Prime Series 2 Cyberverse Commander Class toys, Optimus Prime is a smaller-scale toy, and features translucent plastic for his torso so that the toy can be illuminated using the electronic lights featured in the larger playsets. He comes with two translucent "battle cannon" weapons which feature multiple 3mm posts and ports, allowing them to be held by his hands, or store/mount onto numerous ports on his person. Additionally, he features a 5mm port for a trailer hitch.
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
Released as part of the "W Convoy" campaign ("Double" Convoy, that is!) alongside a silver chrome version of Energon Rodimus, this gold chrome "Mēki" ("plating") version of the Deluxe size Optimus Prime toy was available only as a prize in a mail-in Robot Points contest. Initially limited to 20 units in the original draw, it appears that many more were made available through toy store drawings, given how many went on to appear on online auction sites through 2005 and 2006.

A minor redeco of Beast Hunters Voyager Class Optimus Prime that has the gray parts cast in a darker plastic shade, lacks the black paint operation for the Star Saber's hilt, changes the color of the side windows' paint operations from yellow to green, adds yellow paint operations for the headlights and lacks the silver paint operations above the front windows.


There is definitely a market for LEGO for adults. The modular buildings and other exclusives scratch that itch but there could be so much more. Currently the adult LEGO offerings falls into two categories: sets that look good but are boring to build (architecture) and sets that are fun to build (modular buildings, some Technic). The architecture line is marketed towards adult former fans of LEGO who want something to put on their desk. They can serve as a reintroduction to LEGO for adults.
LEGO has changed a lot in its history. It started as a wooden toy company before it discovered the benefits of molded plastic. Since the advent of the brick, we have been able to build everything from houses, to spaceships, to working robots. The increased detail and wider product line has allowed for the blossoming of the idea of LEGO as an art medium7. LEGO bricks walk the line between giving people more pieces that can be used to add detail and restricting the pieces to inspire creativity. There is a balance that can be seen through the amazing works, both large and small, that can be done with a bit of patience and an eye for plastic.
Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colours of the actual series, and a metallic-paint version (pictured), which is less show-accurate but more shiny. The plain-colours version was the first release and has an Autobot symbol tampograph on his shoulder as per the cartoon, while the later metallic-finish version instead came with a decal sheet.
The Power Plus series are similar to the Power series, except these come with the core that unlocks extra features. The Bumblebee figures in this series are nearly the same as the Power series versions (Camaro ‘Bee’s Power Plus figure has his unmasked head), so if you’re going to get them, and you want the cores, go with these versions. If you want Optimus Prime at this size, though, you’ll have to go with this version.

The Autobots helped repair a Smitco Oil Refinery site which the Lazarus-controlled Transformers had attacked. Optimus had no answer for Spikes accusation that the Transformers' presence on Earth was responsible for the destruction. When Megatron's activities at Lazarus's base were spotted by the military, Optimus insisted on the Autobots going in without backup. They discovered Megatron in the middle of a plan to reformat Earth into a new Cybertron using a cyber-virus. Optimus rejected Megatron's suggestion he should just let it happen, but while the two factions fought, the human military unleashed Operation Clean-Up, dropping a bomb on them. Prime Directive #3
Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).
I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.
Optimus Prime landed in the Himalayan Mountains with G.I. Joes Flint and Hawk. As they searched the area, the trio was attacked by Bludgeon in his Pretender shell. Prime whacked him with his energon-axe and in return Bludgeon bearhugged him and coated him in metal-eating slime. Hawk, still carrying power from the Matrix, helped Prime break free. Optimus then shot his way into the hidden kingdom of Cobra-La.
Originally, Optimus Prime was created as the leader of the Autobots, though it is unknown how he was created or his origins. In a possible future, Megatron was threatened by the existence of the Aerialbots and had Shockwave build a time machine to send them back in time to get rid of them. However, he only ended up changing history for the better. In the revised timeline, Optimus Prime began his life as a robot named Orion Pax, a mostly defenseless dock worker during the Golden Age of Cybertron nine million years ago, with a girlfriend named Ariel and a best friend named Dion. During this time, a new breed of robot with new flight capabilities appeared on the planet that Orion idolized. When Megatron, the leader of the new group of robots, approached him with inquiries about using one of the dock warehouses, Orion was swayed by Megatron. Both Orion and Ariel were severely wounded when Megatron and his forces attacked in order to claim the energy stored there. Searching for someone to help them, the time-displaced Aerialbots took Orion and Ariel to the ancient Autobot, Alpha Trion, who used them as the first subjects for the new reconstruction process he had developed involving rebuilding the frail Autobot frames into more battle-hardy configurations.
As had first been done in the Armada line, Takara elected to supplement their release of the Super class Optimus Prime figure with a new-mold Deluxe class toy. Coming without trailer, Prime Force or electronics, this Prime discarded the larger toy's ability to form Super Mode in favor of being able to Powerlinx with the other compatible toys of the Energon line, forming either a torso or a pair of legs that the other Autobots could connect to. Like the Deluxe Armada Prime, this one too was on the small side for its size class, but just as that figure could, this small Prime can still tow the Super class figure's trailer.

Transported to a parallel Universe, as the walls of reality began to crumble, foretelling the coming of Unicron to the Armada universe, Optimus Prime and Jetfire were reformatted by their Mini-Con companions using the Mini-Con Matrix into new "Powerlinx" forms. Optimus Prime and Jetfire combined to hold the chaos-bringer at bay. Unicron was eventually defeated by the united power of the Mini-Cons.
In reorganizing the company, LEGO became more efficient. The data shows that they have been able to standardize costs and it is likely that they were able to hedge the price of plastic against future price fluctuations. In protecting their business, they have also been able to normalize prices for their customers. A stable price is good for everyone; it helps LEGO ensure that future production costs are budgeted for and it helps the consumer manage their budget. This allows LEGO to protect and grow its market share.
The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
Another thing different now from when I was a kid (70s/80s) is that the sets contain much fewer basic bricks. It seems the models are made out of all these exotic specialized pieces which are less useful for general building. Is this a business strategy to sell more sets by reducing the reusability, a marketing ploy to sell more pieces by making every set include unique collectable parts, or just trying to make the models look more realistic/slick? I think Lego was more fun when the majority of bricks were basic.
For reasons unknown, his ion blaster was sculpted with a large, rectangular handle, requiring accommodating fists. In order to make use of the other weapons in the line (like his own rocket launcher and the solitarium weapons), he comes with an extra pair of replacement fists with smaller, circular peg-holes. This replacement-fist method is also used to plug in his clear-plastic energy axe.
That’s actually a very big part, but I’d go lower than the $10 sets. The little tiny box sets with one minifig and some small vehicle or accessory that were $1-4 when I was growing up in the 80s now seem to be anywhere from $5 to $12 on the shelves. The cheapest of those are the sets that you could buy as a casual gift with pocket change in the 80s. Related to that, I’d like to see a metric that tracked the bottom price (both sticker price and adjusted price) of sets each year.
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.

Available as part of the exclusive Street Fighter II × Transformers toyline, "Convoy" is a redeco of Titans Return Voyager Class Optimus Prime in Ryu's traditional colors, fleshtones and all. He transforms from robot to tanker truck to plane and back. Both vehicle modes have "cockpit" areas to seat any Titan Master (or compatible) figure. Like all Titans Return Voyager class figures, he has built in mechanisms to "bulk up" his noggin. In his case these are spring-loaded pylons. The smaller Headmaster's robot mode is also painted to resemble Ryu.
The figure features newly redesigned hip ratchets to make both robot and combiner mode stable, which were also installed in both TakaraTomy's Motormaster, Grand Scourge, and a revision wave of Hasbro's Motormaster. The pegs that Legends Class Rodimus (or Blackjack) attach to have also been slightly modified to provide a tighter fit, making the latter toy much less prone to falling out.

Once combined, DaiKenzan has three new phrases (spoken in Kenzan's voice), while DaiGekisou has four (in Gekisoumaru's voice). In either combined form, pressing and holding the button activates an additional, longer phrase for their "final attack". DaiGekisou is armed with a scissors-esque "shuriken" made from combining Optimus Exprime's two swords, while DaiKenzan simply wields them separately.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
A highly CG-accurate sculpt of Optimus Prime's head with a built in voice-changer. It also has several sound effects and quotes from the movie. The voice-changer has three settings, giving more accurate alteration of the user's voice (though this is still debatable; most voice changing technology is pretty crummy, at least in toys). Much like the Ultimate Bumblebee figure, this toy will hate your wallet too. While it only costs 30 bucks, if it's anything like another Hasbro voice changer, it will suck batteries up like they were some kind of square candy holder.
A K-Mart exclusive set released on "Black Friday" (the day after Thanksgiving, the most hellishly busy shopping day of the year), this set consists of Super Base Optimus Prime, Jetfire, their respective partner Mini-Cons Sparkplug and Comettor, the Adventure Mini-Con Team, and oddly enough, Longarm. Optimus Prime's red plastics and paint were replaced with gold, the only changes made to anyone in the set. It is this set from which the name of Optimus Prime's combined mode with Jetfire, Jet Prime, comes.
The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades.[113] In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist.[114] Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.[115]
The Transformers Energon figure pen is based on Optimus Prime in his standard Energon body. About the size of a scout class toy, he transforms from truck mode to robot mode almost identically to his mainline toys, apart from the fact that his feet contain the pen and cannot bend. It's really hard to write with, and almost impossible to pose, even though it has full arm articulation. Amusingly, this figure can position itself to transform into his super robot mode (by flipping his helmet on, opening his chest and flipping his hands in), but because there are no versions of the Prime Force drones in this scale, it's impossible to complete him.
An additional oddity is that unlike every other toy in the Go! toyline, Optimus Exprime came packaged in a box without a window. This is potentially because of the sheer amount of information TakaraTomy wanted to print on the box, or because they were unable to fit him into the box in robot mode with all of his accessories displayed. Whatever the reason, it left him with a smaller box than the other voyagers in the line, a substantially-altered box layout, and a much shorter profile.

Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.

In Transformers: Armada and Transformers: Energon, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing Transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]
How to Say Expensive and Mean It - The Seibertron.com Twincast / Podcast reaches episode #213, and the discussion begins with Takara Tomy's upcoming Masterpiece MP-44 Optimus Prime version 3. This toy has a substantial price tag that has caused controversy amongst Transformers fans. In-hand impressions of Transformers Generations War for Cybertron: Siege figures come next, with analysis starting for Deluxe Class figures Sideswipe, Hound, Cog, and Skytread/Flywheels. After that, Micromasters from the Race Car, Battle, and Air Strike Patrols get a look. Weaponizers Lionizer, Blowpipe, and Firedrive come next before the Generations discussion concludes with Voyager Class Megatron and Optimus Prime. A look at the upcoming Generations Select releases of Ricochet and Red Swoop is followed by a quick examination of the recently released Transformers: Botbots lineup. The endings of the long-running IDW Transformers comics continuity comes next, with the end of event book Unicron occurring first. Optimus Prime's namesake series is talked about next before the comics discussion concludes with Lost Light's finale. Bragging Rights close out another episode with early holiday season sales driving the cast's recent purchases.

Alternatively, the Autobots could concoct a plan where Optimus would pretend to allow himself to be taken prisoner, per Buddy’s suggestion. The Decepticons, fooled into thinking they’ve won, took Optimus Prime into their base. Having hidden his troops inside his trailer, Optimus and the Autobots then led a surprise attack on their unsuspecting foes.

In a break from tradition, Energon Optimus Prime's large mode resembled a configuration similar to Voltron or to the Super Sentai action figures. This design was unpopular with many fans due to design issues with the toy. The small robot's body was large in proportion to his arms and legs which made the figure appear fat, earning it the nickname "Fatimus Prime" or "Obese-imus Prime". The 4 vehicles that combined with the robot were small, lacking the intricate detail that made other toys in the line popular. Fans were also angered by early releases of this toy in which the head was molded with a mouth rather than the traditional face plate design. Later releases of the toy eliminated the visible mouth feature.
He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.
A nice article but I see a few flaws. First of all if the distribution of LEGO sizes/prices is increasingly skewed it is better to either split the sample or look at medians or rolling medians than averages. Secondly, this is a perfect case to run a regression panel regression with time dummies to see both the impact of time and the impact of size on the prices.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]

Optimus Prime was one of only two Armada-theme figures in the otherwise Generation 1-centric Q-Robo Collection line of super deformed PVC figurines, the other being Armada Megatron. Like all the figures in the series, Prime featured articulation in the neck and shoulders, and was also available in a translucent colored plastic: as an Autobot, Optimus came in translucent red, but was also uniquely available in a golden metallic "pewter" variant as the wave's solitary rare chase figure. All Q-Robo figures were sold in sets of two, one full-color figure and one translucent one, blindpacked in a plastic capsule.
Hybrid Style Optimus Prime is an insanely detailed and complex transforming toy, created under the supervision of famed mecha designer Shōji Kawamori. Standing only three and three-quarter inches tall in robot mode, the figure is partially constructed from die-cast metal and features one of the most complex transformation sequences ever seen on a Transformers figure of its size. Alas, the small size of the figure also works against it, as it required several design concessions that resulted in (if we're being nice about it) an unimpressive cab mode.

Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.
In an alternate version of the following events, Bumblebee would return to base, reporting that the Decepticons were planning to destroy the humans' farmlands in an attempt to starve mankind and force them into submission. Upon hearing these news, Optimus gathered a squad of Autobots and headed out to stop the evil robots. However, once they found themselves in the open country, they found themselves at the mercy of a Decepticon ambush; Bumblebee had been fed false information! In one iteration of the events that followed, Optimus could have avoided his death if only he had listened to your warning! In another iteration, Optimus had to decide whether he should send his Autobots away to the safety of a nearby bridge while he fended off the encroaching Decepticon horde, or if he should remain by the side of his troops as they all made a break for the bridge. Remaining as a single unit would spell their doom, but by sticking together, the Autobots could make it back to the safety of their base. Battle Drive
Exclusive to Walmart, this Deluxe Class Optimus Prime is an all-new mold, close in scale to Voyager Class Megatron. He has a high range of motion, with ball jointed shoulders and hips, swivels at the neck, knees, and feet, and double swivels in the elbows. As a result of the transformation process, he can also rotate at the waist, though this is hindered considerably by his "backpack" kibble. This can be remedied by pointing the truck nose downward, as it is in the packaging. Optimus Prime also features the spring loaded "Automorph" feature in his head, if the truck kibble pushes the small grey switch from his back before splitting the chest into half.

The subject of Bumblebee’s voice is a bit of a complicated matter. Just as he was the second Transformer ever seen on the original TV show, he was also the second to speak and did so in the loud and clear voice of Dan Gilvezan, who voiced him throughout the original series and animated movie. But by the time we get to the first live-action movie, he could only talk via audio clips because, according to a prequel comic, Megatron had destroyed his voice capacitor during a battle on Cybertron.
This version of Leader-class Optimus Prime features a new lower face sculpt that lacks a faceplate, as well as the replacement of his fuel tank/exhaust assemblies with new, transforming versions that can combine into his ion blaster/barrage cannon. To the simultaneous pleasure and displeasure of people who had already purchased the first release of Leader-class Revenge of the Fallen Optimus Prime, Buster Optimus Prime features an extensive paint job that closely matches Prime's appearance on the big screen, including covering almost all of his grey plastic with silver paint or chrome, expanding and outlining all of the flame tampographs white for greater accuracy to ILM's computer model, and generally painting in small details, nooks and crannies that were neglected on the first release due to cost-cutting reasons. The red and blue plastic colors also vary from the original release, to better match his film appearance.
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, bumps (thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners and the windscreen visor. In robot mode the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
Optimus Prime was blasted into pieces by Dragon Megatron. Beast Wars Metals #5 Fortunately, his spark remained perfectly intact—in the remains of his Matrix-shaped spark chamber. Megatron was going to destroy Prime's spark, but Cheetor (now in his Transmetal body) saved it. Prime's spark was eventually swallowed by Optimus Primal, who was upgraded into Optimal Optimus by doing so.
Part of the first wave of Beast Hunters Series 3 Voyager Class toys, Optimus Prime is functionally an upsized copy of his Beast Hunters Series 3 Cyberverse toy, though with certain sculpted details based on his larger toys, the replacement of his ball joints with more robust ratchet joints, the addition of thigh swivels, and various deco differences. As a result, his complexity is lower than in his previous Voyager Class toys, but he ends up being much, much more massive.
The SS-03 version of Takara's Deluxe-class Optimus figure, based on the Anniversary release, was released in Hasbro markets in a two pack with the smaller Japanese Megatron figure. There are some tiny but notable differences between this and the Anniversary figure; the Hasbro version uses a more neutral dark-gray for the main body as opposed to the Takara version's blue-tinted dark-gray, plain dark-blue plastic rather than dark-blue-with-sparkles, and plain yellow paint for the cab's lights rather than sparkly-yellow/gold.
In order to come to some sort of conclusion about the price of LEGO, I needed to get some data on the historic retail prices of LEGO sets. The best source of this information is brickset.com. This website has data on almost all LEGO sets ever made and the retail pricing for many of them. I wrote a web scraping program to go through the Brickset database and make a database of set information. In order to keep the results relevant, I decided to compile one set that fit two basic qualifications:
In Transformers: Autobots, Optimus Prime meets up with the other Autobots to give further commands to his troops. Create-A-Bot, the new rookie, is eager to help in the cause, but Optimus tells him to sit back while the other Autobots fight the Decepticons. Create-A-Bot finally defies orders and completes a mission against Optimus's council. After nearly getting himself and the other Autobots killed, Create-A-Bot apologizes to Optimus personally. Taking pity on the newcomer, Optimus lets him off with a stern warning, and they move out together to face Megatron, who has absorbed the power of the Allspark. Optimus fights Megatron, but Megatron gains the upper-hand. Optimus is on the verge of defeat when Create-A-Bot takes the Allspark and drives to Megatron's chest, weakening Megatron but mortally wounding himself in the process. Optimus fights Megatron again, defeating him. As Megatron is on the ground, he tells Optimus that if he kills him, the Allspark will be destroyed and Cybertron will never be restored. Optimus says to Megatron that he will do what he must do, then he raises his sword and kills Megatron, destroying the Allspark in the process. Create-A-Bot also dies, but not before telling Optimus his final request to make Earth the new home of the Autobots and to protect the humans. The game ends with Optimus sending a message to all surviving Autobots taking refuge among the stars.

Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
The Autobots tracked SARA's energy signature to a decrepit old building. While a team headed by Jazz stormed the building's main floor as a distraction, Optimus, Hot Rodimus and Brawl infiltrated its basement covertly. Coming upon the Decepticons' inner sanctum, they found Megatron having already wired SARA into his own body! Horrified by this development, Optimus demanded to know what Megatron was planning to do. The true extent of Megatron's megalomania was then revealed; the Decepticon leader planned to use SARA's energy to become ruler of all space-time, even if it meant destroying his home dimension in the process. Both Hot Rodimus and Brawn were knocked aside by Megatron in short order, leaving Optimus with no back-up and few options. Deciding he needed to take down Megatron, even at the cost of his own life, Optimus transformed to vehicle mode and rammed the Decepticon. He then lost consciousness...
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg onto his lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
Only available at ToysЯUs, this Optimus Prime is a redeco of the Classics figure. He features a cartoon/toy accurate deco on his truck/robot parts, and vacuum-metallized upper legs & front grille to evoke his original Generation 1 toy. Like every Classics Optimus Prime mold, he still features all of his accessories. This Optimus was packaged along with the redecoed Age of Extinction Optimus Prime.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
×