The stickers may not be cut right, my copy has them off-center, they're probably using an 80's type bladed stamp with little QC to rush them out. The cab will not have the stripes applied, those are included on a strip of mylar/foil/whatever silver but you have to measure and cut them to fit. Every KO can be identified easily by these missing stickers in the box. Older releases also had the trailer's stickers separate but those have not been made in some time.
The Goldbug change happens in many different continuities, but in the original animated series, it happens like this: while trying to rescue the body of the dead Optimus Prime, which was being held by evil humans, Bumblebee’s damaged by Superion so badly that they have to rebuild him as a more powerful Throttlebot. His new body is much shinier, so a restored Optimus Prime dubs him Goldbug. In the Shattered Glass continuity, he goes evil as Goldbug. And in the IDW comics, confusingly, Goldbug was never affiliated with Bumblebee, but is the leader of the Throttlebots.
Prime got his own rap segment. He was seen in his "Combat" toy body, waiting for Megatron as he attacked a human subdivision. Prime converted to robot form, blew up Megatron's weapon at point blank range, and slugged it out with him. Apparently emerging victorious, he was next shown sitting next to an identical truck, which kid mistook for the real thing. The real Prime then transformed and picked up the kid, inspecting the human with his cold, lifeless, flashing red optics. Combat Heroes commercial
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron.
Rodimus also appears in the novel Transformers: Retribution as part of the crew of the Ark. Along with Kup and Bumblebee, he suspects that something is amiss with the inhabitants of the planet Aquatron, and takes a small drops ship down into the planet's oceans to investigate. The trio are captured and brainwashed by the Quintessons, who force them to testify against Optimus Prime in a mock trial. Fortunately, they are later returned to normal and return to space aboard the Ark with the rest of the Autobots.
In "Mission Accomplished", Optimus is pressured by Sentinel to tell Ultra Magnus that his story about the Decepticons is untrue, but he refuses. Meanwhile, the on-board computer plots a train infused with a shard of the Allspark. When Ultra Magnus and Jazz set off there, Optimus suspects that the Decepticons are luring them into an ambush and rushes to their help, though Sentinel Prime tries to detain him. At first, Ultra Magnus doesn't believe him, but a short time later, Optimus is proven right as Starscream falls from the sky after being blasted by Megatron, much to Sentinel Prime's astonishment and fright. Starscream turns out to be alive, inflicting injury on Ultra Magnus. Optimus takes the affair into his own hands momentarily and, with Sentinel's aid, manages to apprehend the Decepticon. While Sentinel Prime deflects Starscream's shots with his power-shield, Optimus succeeds in taking Starscream by surprise and handcuffing him. When the shackled Starscream is delivered to the Elite Guard spaceship, Ultra Magnus admits Optimus Prime was right and allows him to stay on Earth in order to seek out the other fragments of the Allspark.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.

On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.
The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.
Simon Furman's "Alignment", a text story available through Transforce, a British Transformers convention, mentions Prime falling during what was intended to be the final conflict with the Decepticons at Pinea Omicron, long after the events of the Generation 2 comic book. He managed to defeat Galvatron II, but in doing so, was damaged such that Grimlock had to engage a stasis field around him to save his flickering Spark, making Prime a living war monument.
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.
Each arm features flip-out blades that trigger when a button on the forearm is pressed. Each of these blades has a Cyberglyphic symbol on it. The blades severely restrict Prime's arm articulation when retracted, as they get in the way of the kibble, but as there is very little one can do with Prime's arms without causing the blades to deploy, this is hardly noticeable.

In the alternate universe of the 2003–2004 toyline and series, Transformers: Energon, Rodimus (lacking the "Prime" suffix in English, but still called Rodimus Convoy in Japan) was a great leader on Cybertron ages in the past and was viewed as a hero by many, including similar character Hot Shot. Desiring to escape the war that had consumed the planet, Rodimus departed Cybertron with a contingent of like-minded troops, most of whom settled on an alien planetoid and became the energon-mining Omnicons. Still, Rodimus continued on his journey with Prowl and Landmine, carrying the "flag of peace" from world to world.
 • Optimus Prime  • Rodimus  • Ultra Magnus  • Alpha Trion  • Arcee  • Blaster  • Blurr  • Brawn/X-Brawn  • Bulkhead  • Bumblebee/Goldbug  • Cliffjumper  • Elita One  • Hoist  • Hot Shot  • Hound  • Ironhide  • Jazz  • Jetfire  • Kup  • Metroplex  • Mirage  • Omega Supreme  • Perceptor  • Powerglide  • Primus  • Prowl  • Ratchet  • Red Alert  • Sandstorm  • Smokescreen  • Seaspray  • Sentinel Prime  • Sideswipe  • Springer  • Wheeljack  • Wheelie  • Wreck-Gar
Hot Rod's tech specs list him as an Autobot Cavalier, while as Rodimus Prime, he is listed as an "Autobot Protector" - unlike Optimus Prime's, which directly states "Autobot Commander". A commercial for the toy hinted at his ascension, but pitted him against Cyclonus and Scourge instead of Galvatron, who was his chief adversary in the animated series.
A Bic Camera and Joshin Kids' Land exclusive, this redeco is the first release of the Prime: First Edition Deluxe class Optimus Prime figure in Japan, featuring a slightly lighter hue of red (the stock photography provided by TakaraTomy, showed Orion Pax's red plastic features more pink than its original toy, this seems to have been a trick of the lighting or a photoshop), and greyish blue plastic. He features several customer-applied foil stickers, including Decepticon insignias of varying sizes. He comes with a gold vac-metal version of the Arms Micron, R.A., as well as the normal blaster-cannon.

The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.


The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
On the battlefield, there are few who rival Optimus Prime's prowess. He is easily the strongest of any Autobot his size, and his ion blaster and energon-axe are deadly weapons. He would sacrifice his life to protect his fellow Autobots or those under their care and does so on a regular basis. His compassion for other sentient beings is his only real weakness, and one the Decepticons have taken advantage of time and again... though it's also the source of his strength!

Later, the Transformers were all transported to Cybertron by Primus to battle Unicron. Although Unicron had tainted the Matrix after killing Thunderwing, Prime managed to reacquire and purify the Matrix. Prime then sacrificed his life one more time to destroy Unicron by plunging the Matrix into his maw. The Powermaster process, however, had been working to fully bond Prime and Hi-Q. Prime's death completed the process, and the two minds and souls became one. Hi-Q's biomechanical body was stripped down and reconstructed by the Last Autobot, resurrecting Optimus Prime once more with the two minds now one. Prime rejoined the other Transformers on the planet Klo and routed Bludgeon's Decepticons.
Released as part of TakaraTomy's Welcome to Transformers 2010 campaign, the "Sons of Cybertron" set includes a redeco of the 2006 Classics "Ultimate Battle" pack Deluxe class Optimus Prime, cast mostly in translucent plastic (his shoulders remain opaque Polyoxymethylene (POM)). He comes packaged with a similarly translucent redeco of Classics Rodimus.
After their own Optimus Prime disappeared, Scavenger and Smokescreen discovered an alternate version of Optimus Prime lying unconscious and barely alive in Autobase Earth. Though Red Alert did what he could, the mysterious Prime reactivated only long enough to utter a cryptic statement about the walls crumbling and the coming of chaos, then died. Worlds Collide, Part 1 of 4
On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial

The first commercialized yo-yos in America were sold in vast majority by entrepreneur Donald Duncan and children couldn't get enough of them. The design was elementary: two wooden or plastic discs, connected by an axle with a string tied to it. To keep the user from flinging the yo-yo comically through the nearest window pane, the string featured a tiny finger loop at the opposite end. A loop that, as we all remember, tightens relentlessly with each toss until the finger tip is a healthy shade of purple.
The U.S. release of Super Fire Convoy had the Japanese voice replaced with an English voice (with the lines, "Optimus Prime, Maximize!" and "Autobots, Transform"), and Autobot insignias were added on the side panels. Much like the Japanese version, Optimus Prime's normal robot mode can combine with Ultra Magnus (sold separately) to form Omega Prime.[48]

Trailer (トレーラー Torērā) was often sleepy, but was the strongest of the BeCools. He could carry stuff in his trailer. The Self-Introduction Chapter When Trailer came across a traffic jam, he crashed into the BeCools holding him up, forcing them to transform into robot mode and realize they could just walk past the jam. The Story of the Surprising and Big Traffic Jam! When the same bunch of BeCools were stuck before a hole, Trailer selflessly used his body to act as a bridge for the other BeCools. Yellow Sports Car was so inspired by his heroism that he offered to fill the hole so that Trailer could pass through. Trailer did so and sped away, leaving Yellow Sports Car in the hole. The Story of Mister Trailer's Big Success!


Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.
We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).

A giant-sized transforming Optimus Prime figure is set to be released for the third film. The set comes with a Leader Class-sized Optimus Prime figure and a trailer that transforms into his Omega Combat Armor - both of which combine to form Prime's Ultimate mode.[126] This set will be released on August 1st, 2011, a month after the film's premiere.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.

(As an odd postscript to this tale of footwear-induced madness, although the promo pictures all showed the shoeformer as a white and navy blue sneaker that transforms into a white and aqua blue robot, the product actually released sported much darker colors for all the robot-mode parts, with a deep teal instead of aqua, and almost all the white replaced by an icky tan/cream/grey color, including the head. Basically, the figure looks like the promo picture viewed through really dark sunglasses. Although this certainly doesn't make it look any more like Prime, you might argue that it looks a little less like Magnus. Sorta. Maybe. Not really.)
Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.
After a period of effective leadership, which saw the activation of several new Transformers including the Aerialbots, who Prime infused with life using the Matrix, Prime engaged Megatron in a video game duel for possession of a super fuel. Prime was victorious, but Megatron implemented a cheat code that killed Prime later. Autobot surgeon Ratchet's subsequent efforts to restore him were unsuccessful, and his body was launched into space. The Autobots were unaware of the presence of the physical Matrix within the corpse. The funeral barge eventually crashed on a giant moon and, as it lay there for an untold time, the Matrix reached out to nearby living organisms, studying and recreating them.
Originally, the Alternators Dodge Ram mold was intended by Hasbro to be a completely different character altogether than Optimus Prime (which character is unknown), but Takara reportedly demanded the Ram be made into Optimus out of fear that the toy (whose vehicle mode is scarce in Japan as a real vehicle) wouldn't sell as well in their market if it wasn't a popular and easily recognized figure; as the figure reportedly cost twice as much to build as the others, Hasbro had to agree in order for Takara to continue fronting part of the production cost. In an ironic turn of events, the Dodge Ram was prematurely solicited by Takara not as "Convoy" (Optimus Prime), but as his Masterforce look-alike Ginrai. As a matter of fact, the head sculpt for the Alternators Oprimus Prime toy is based on the Super Ginrai (Powermaster Optimus Prime's "super mode") toy's head sculpt. Ultimately, however, Ginrai was cancelled, with only Hasbro releasing Optimus Prime as originally planned. Eventually, Takara released the Dodge Ram as as part of the new Kiss Players line, now named "Convoy" (Optimus Prime), and he will be released in Binaltech this year.
An exclusive to Amazon.co.jp, this redeco of Optimus Prime is bundled with the Japanese release of the Revenge of the Fallen DVD. He is another in a long line of black repaints, swapping most of his red and blue plastic for black, some of his bright grey plastic for a cool grey and blue, and is covered with gold and silver flames. His orange blades are now translucent blue.
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.
Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation 1 Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie... because there are so many long-nose cabs driving around Mars. Yeah.

Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
Somewhere along the line, G.I. Joe picked up the familiar storyline that we all best associate with the toys: G.I. Joe Team vs. the Evil Cobra Organization. A classic tale of good vs. evil. Well guess what. Somewhere else along the line the franchise picked up a very different storyline and a new look to boot, highlighted by the newest figurine: The DARK NINJA MASTER.
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.
Of course, many voice actors have voiced him in different TV shows and video games over the years, in both English and Japanese. Most notably by a Power Rangers actor and a Batman voice actor. The latter is Will Friedle, who voiced Bee in the most recent series, Robots in Disguise, plus cameos in Rescue Bots, Transformers Prime, and the Predacons Rising TV movie. Friedle is well known as Batman’s voice in Batman Beyond. As for the Power Ranger, that would be Johnny Yong Bosch, who played Adam Park, the original Black Ranger. Bosch was Bumblebee’s voice in the video game Transformers: War for Cybertron.

After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.


Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.


Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.
The trailer unfolds to form a battle station bristling with many firing weapons. Primarily, it can fire an air-powered missile launcher, a ripple rocket launcher with 5 missiles that can be launched individually (this turret can also be mounted in Laser Prime's hand) and a 'disc launcher', that fired several blue plastic discs adorned with the Generation 2 Autobot sigil. This disc launcher is the only weapon that can be used in vehicle mode.

Leader class figure, this is his form used in the Cybertron television series. Can combine with Leobreaker (or Nemesis Breaker) and/or Cybertron Wing Saber, and can use Metroplex's axe or Vector Prime's sword. At first, Optimus Prime's (Galaxy Convoy in the Japanese version) alt-mode is a futuristic firetruck, although some believe it to be some sort of mobile weapons platform (the show itself treats it as a firetruck). This can also transform into a wing mode, with wings and cannons on each side of the truck. In addition to his standard robot mode, he can combine with his rear 'trailer' section to form a heavily armed super mode. That trailer section can also form an independent weapons platform, usable by anyone. His face, designed in the classic Prime style, merges the two mouth-plate elements - a slitted version to expose his mouth, like Beast Wars Optimus Primal did on the television series and a full mouth-plate which can rise to cover it.[60]
Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.

This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.
In the Autobot Campaign, Optimus Prime provides intelligence and missions to Bumblebee in his search for the Allspark. Eventually, the clues lead the Autobot to Sam Witwicky. After saving Sam from Barricade, Bumblebee finally completes preparations for the Autobots to arrive on Earth. Once on Earth and having informed the two teenagers of their mission, Prime and the Autobots are discovered by Sector 7. Optimus sends Jazz on a high-speed destruction distraction mission, then sends Ironhide to rescue Jazz from a double-threat posed by the government agents and various Decepticon scouts. When Bumblebee is captured, Prime transforms and chases the chopper which from which the small Autobot is tied. After a lengthy chase, Prime manages to catch the net, only to be thrown off by another Cybertronian meteor. As Bumblebee is carried away, Optimus promises he will not fail him again. Jazz informs him that the meteor is not an Autobot. Prime confronts the new threat, who turns out to be the Decepticon Triple Changer Shockwave. The two battle it out across Tranquility before Optimus finally destroys him. During the battle, Optimus overhears Starscream's transmission revealing the location of the Allspark. Optimus then returns to an intel role as he guides Bumblebee in his mission to retrieve the Allspark from Hoover Dam. Unfortunately, the Decepticons manage to free Megatron, leading to the final battle in Mission City. As the Autobots battle it out with the Decepticons to protect Sam and the Allspark, things seem to take a turn for the worse as Megatron finally arrives. Before he can claim the Allspark, Optimus attacks him. Optimus defeats Megatron and leaves him on the ground, seemingly devoid of life. However, just as Sam is giving the Allspark to Optimus, Megatron awakens, leaping at Optimus with his chain-flail out, making one last attempt at defeating his adversary. Optimus grabs the chain, pulling Megatron in closer, and, with the Allspark clutched in his fist, delivers a punch through Megatron's spark, killing him. Optimus reflects on the losses and rewards of this battle, as the Autobots have a new home, but many were killed in the battle. The story ends with Optimus and the Autobots choosing to remain in Earth, proclaiming it as their new home.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
Realizing that the planet is dying, Optimus orders a mass evacuation of all Autobot cities, but many transport ships are destroyed by the Decepticon satellite Trypticon, under orders from Megatron that no one shall leave the planet. He orders the Aerialbots Jetfire, Silverbolt and Air Raid to fly and destroy Trypticon. The aerial trio manages to destroy Trypticon's jet pack and send the Decepticon behemoth crashing into Cybertron, where Optimus Prime and the Autobots band together to narrowly defeat him, sending him plunging into a pool of raw energon. Optimus and the remaining Autobots volunteer to stay and defend Cybertron from Megatron for as long as possible while the rest evacuate the planet. He commissions a massive vessel known as "the Ark" to transport the remaining Autobots into space when the time comes.
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.
Hot Rod appears in All Hail Megatron , while traveling through space by himself, he found himself under attack by the Torment, a Decepticon warship crewed by Bludgeon and the Pretender Monsters. He was shot down, but managed to transmit a distress call to the Autobot starship Trion, which came to his rescue. After the Decepticons were chased off, Hot Rod joined the crew of the Trion. When the Decepticons' galaxy-wide assault hit, the Trion was shot down over Cybertron. Hot Rod sent out a distress signal and was ecstatic when he ran into some other Autobots. Hot Rod was taken back to base and relayed the story of how he and his other crew-mates from the Trion arrived on Cybertron, having been diverted there by Decepticon ships and forced to crash land. Once on the surface, Hot Rod sent out his distress signal and was so sure someone heard it. Kup arrived with the rest of the Trion's crew at that point, just in time to tell Hot Rod of course no one heard his message. After the Autobots narrowly avoided the Insecticon swarm and Sunstreaker sacrificed himself, Hot Rod jumped to Drift's defense when he was being insulted by Bumblebee. When the Autobots were later rescued by Omega Supreme, Hot Rod was glad that he sent out the distress call. He was then ferried to Earth with the other Autobots aboard Omega.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.
Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.
The earliest releases of Energon Optimus Prime have no ridges on the inside of the chest windows and a different head sculpt featuring an Optimus Primal-style mouth-slit in Prime's mouthplate. This was soon replaced with a full mouthplate, and it was this version of the toy which appeared in the Energon cartoon and was released by Takara. Other changes made to Takara's version of the toy involved a chromed front grill, more vibrant plastic colors on Digger-3 and Submarine-4, a darker blue plastic on Prime himself, and more intricate paint operations. Takara's release lacks the electronic sound effects seen in Hasbro's version, which were commonly gutted for the Japanese releases of any Autobot toys who had them, though Prime retains his light-up chest.

NEW! TFSource News - IF Catastrophe, Flame Toys Tarn Final Stock, MMC Cylindrus, MP-36+ Megatron & More! NEW HOT INSTOCK ITEMS: - Iron Factory - IF-EX24X War Giant Catastrophe - Set Of 5 - Flame Toys - Transformers - Tarn - Mastermind Creations - Ocular Max - R-34 Cylindrus - Mech Fans Toys - MF-37 Veteran and MF-20 Scourgers - Magic Square - MS-B02F Fevernova - Diaclone Reboot - DA-30 Powered System Maneuver Gamma & Delta Set - Planet X - PX-C01 Ismenios - Transformers Encore - - Read More
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.

Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
Best IDW Transformers Comics Stories - The IDW timeline/universe/story that started in 2005 has ended and I personally believe it includes the best Transformers fiction involving our favourite G1 characters. Of course comics can be daunting to get into and I won't pretend every single story was a gem. But there was some stellar storytelling here, the best these characters ever got and I will go through the 5 best stories from this 13 year run that any Transformers fan should check out asap. The titles link to the comics on comixology in case you want to check them out.
Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.
Bumblebee had many adventures in his bizarre humanoid form. He wound up in the heart of Cybertron to find the resting place of the creator/god of all Transformers, Primus, and learn of their origin as a race. Later, he went on a quest to find the all-powerful Creation Matrix, also known as the Autobot Matrix of Leadership, but stumbled upon the Cybertronian Decepticon commander, Thunderwing, who blasted away Bumblebee’s Pretender shell.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
If you’re a child of the ‘80s and grew up with the original The Transformers cartoon, Bumblebee may have been the second Transformer you ever saw-- in the narrative of the show, anyway. In the first episode, “More Than Meets the Eye,” you would’ve started off by watching the memorable opening sequence. There, you first get a quick glimpse of a group of five Autobots in vehicle mode, including Bumblebee alongside Optimus Prime.
When IDW Publishing received the rights to the series, author Simon Furman was hired to oversee the line. Furman decided that the Generation 1 continuity "was in need of ... a contemporary restart"[15] so that the comic could retain a modern audience. Furman's revised continuity establishes Optimus Prime as the present-day leader of an Autobot army spread across the galaxy in small units, waging a covert war against teams of Decepticon infiltrators over resource-rich worlds. The Stormbringer miniseries explains that the Transformer homeworld of Cybertron is a dead planet, ravaged by an ancient cataclysm caused by the Autobot-Decepticon War. Prime had been forced to ally with his arch-rival Megatron to end the destruction. In the series, the interference of Jetfire and the Technobots, in a plot organized by the Decepticon Bludgeon, alerts Prime to the possibility that the Cybertronian cataclysm might be re-ignited and spread to other planets. Prime calls in the Wreckers, meeting them on the surface of Cybertron in time to witness the return of the being called Thunderwing, the focal point of the apocalypse. The combined efforts of Prime, the Wreckers, Jetfire, the Predacon-led Decepticons, and a unit of aging Centurion drones are barely enough to render Thunderwing inert.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.
(As an odd postscript to this tale of footwear-induced madness, although the promo pictures all showed the shoeformer as a white and navy blue sneaker that transforms into a white and aqua blue robot, the product actually released sported much darker colors for all the robot-mode parts, with a deep teal instead of aqua, and almost all the white replaced by an icky tan/cream/grey color, including the head. Basically, the figure looks like the promo picture viewed through really dark sunglasses. Although this certainly doesn't make it look any more like Prime, you might argue that it looks a little less like Magnus. Sorta. Maybe. Not really.)
This set is a ToysЯUs Japan exclusive, consisting of Powerlinx Optimus Prime (dubbed "Convoy Final Battle Coloration" and redecoed with more show-accurate colours, principally a silver mouthplate instead of red and varying color saturation from the Hasbro version), a "crystal" version of Overload ("Ultra Magnus Special Clear Version") made out of transluscent plastics, and an exclusive X-Dimension redeco of the Street Action Mini-Con Team. This set is entirely "new" content not available in the normal mass-retail Micron Legend line, and is also the last release of "X-Dimension" Mini-Cons. Rather than come with individual bio cards for the various characters, the set came with only a single card for Magna Convoy.
His original trailer is not included with the set; instead, he comes with a new deluxe-scaled trailer, not available with any other figure, based on the one towed by Prime in Dark of the Moon. The trailer is compatible with both figures, and sports 5mm post-holes that will hold (among many other things) G1 Prime's laser rifle and the MechTech weapon Movie Prime is armed with.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More 
×