Released as part of the first wave of the Cyberverse Commander class figures, this Optimus Prime is a roughly Scout-sized figure.He comes with a jetpack that can combine with both his truck and robot modes. The jetpack attaches via C joint clips, and the jetpack can transform in and out of a winged configuration when Optimus is in truck mode. Optimus himself features C joint bars for his smokestacks and trailer hitch, as well as bars on the top of his headache rack, while his hands and jetpack can hold/mount his rifles via C joint-related 3mm clips/holes.

As seen in the episode "War Dawn", Optimus Prime began his life as a robot named Orion Pax, a mostly defenseless dock worker during the Golden Age of Cybertron nine million years ago, with a girlfriend named Ariel and a best friend named Dion. During this time, a new breed of robot with new flight capabilities appeared on the planet that Orion idolized. When Megatron, the leader of the new group of robots, approached him with inquiries about using one of the dock warehouses, Orion was swayed by Megatron. Both Orion and Ariel were severely wounded when Megatron and his forces attacked in order to claim the energy stored there. Searching for someone to help them, the time-displaced Aerialbots took Orion and Ariel to the ancient Autobot, Alpha Trion, who used them as the first subjects for the new reconstruction process he had developed involving rebuilding the frail Autobot frames into more battle-hardy configurations. With this reconstruction, Orion Pax became Optimus Prime, the first of the Autobot warriors.

This Asian-exclusive redeco of AM-01 Optimus Prime features a sticker-less, extensive paint-job, coating his red parts and half-translucent arms in glossy metallic paint, painting his torso, shins, grille, fenders, and wheel rims silver, painting half of his feet in glossy black, having painted headlights, and featuring a unique "snake" insignia on his roof/right shoulder-pad, due to 2013 being the "Year of the Snake". O.P comes pre-assembled, lacks stickers, and features paint operations.


This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
Bumblebee - The Transformers live action film franchise's latest installment is out, with Bumblebee hitting theaters last week. The Seibertron.com Twincast / Podcast brings you its review of the movie, with one of its regular podcasters Jon Bailey bringing his insights after providing the voice acting talents for Soundwave and Shockwave in the film. Along with this insider perspective, the cast discusses each significant part of the movie itself, beginning with the "Generation One" inspired opening scene on Cybertron. The new human and robot characters presented in the Earth based adventures are also reflected on, with the cast agreeing that this latest movie is a measurable tonal departure from the approach of previous films in the franchise. After talking through the entire movie's plot and characterizations, speculation about what comes next for Travis Knight, Michael Bay, and the Transformers live action movies comes next. A quick chat about the movie's tie-in toyline follows, and the show concludes with a quick round of holiday season bragging rights about the cast's Transformers related gifts.

Although Cybertron's Energon stocks were destroyed, the Autobots discovered a recording pointing to the Logicon planet Metascan Alpha, which had Energon in abundance. Optimus ordered Hot Rod and Ultra Magnus to take a team each to find the planet. The Autobots discovered they were being spied on by the Decepticon Clones, and Optimus swore that Galvatron could pay. He led a team to the derelict space destroyer which the Decepticons were using for a base and fought their leader one-on-one. As he was about to destroy the Nullification Cannon, Scorponok took a swing at him which connected instead with the Cannon, obliterating it. Optimus was helped away from the destruction by Blurr and Sureshot. The War Against the Destructons, Chapter 1 of 3

French die-cast model producers Majorette teamed with Kabaya to produce the Transformers Mini Car Collection, a line of Armada-themed die-cast vehicles, all of which were redecos of pre-existing Majorette toys. Prime was a redeco of Majorette toy #256—a long-nosed tow truck—in his traditional red and blue, now bearing the Autobot insignia, the Micron Legend logo, and an image of the Autobot leader on its hood. The toy came with a pack of gum.


With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
Tiny Turbo Changers Optimus Prime is a small, stumpy, soft-plastic blind-bagged mini-figure that changes from robot to a licensed Western Star 5700 OP Truck with just a few simple steps. He features ball-jointed shoulders and hands that are compatible with Cyberverse weapons and other 3mm post accessories. Like all Tiny Turbo Changers, his vehicle-mode tires do not spin, sorry.
A redeco/new-head retool of the Rescue Bots Hoist the Tow-bot figure, Optimus Prime transforms from robot into a tow truck. Pulling the tow truck's hook up converts him back into a robot. The panel on the top of the cab has been remolded with additional truck detail in place of the Rescue Bots logo on Hoist, while the Rescue Bots insignia on his torso is unpainted.
3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.

Optimus Prime leads Bumblebee, Drift, Kup, Prowl, Ratchet, and Wheeljack in Las Vegas when a Cybertronian ship crashes, containing Galvatron, Cyclonus, Scourge, and an infestation of zombies from another universe. Galvatron attempts to take command of the Autobots and, after fighting them, explains his mission to stop an undead infestation. Wheeljack sets up an energy shield around the city to keep the infestation contained, but it only last for 24 hours. Despite the containment effort, Kup realizes that Bayonet, a Decepticon in Galvatron's command, is not all she seems. She turns out to be the extradimensional vampire Britt.[17]


Rodimus gained the help of the criminal Witwicky family, believing they would help him learn more about Earth. After fighting Goldbug for leadership of the Autobots, he renamed himself Rodimus Prime. His first attack on the humans was to take control of the base controlling a human military satellite and use it to blackmail the humans into making him the leader of the world. The Decepticons were able to break into the base, where Heatwave used his ability to control machines to have the satellite fire on its own controls and then destroy itself.[16]
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation 1 Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie... because there are so many long-nose cabs driving around Mars. Yeah.
This reissue of the original Generation 1 Optimus Prime figure comes in a two-pack with the Deluxe-Class Dark of the Moon Optimus Prime figure. Prime himself is almost identical to the Encore release, save for his trailer hitch which was retooled to allow a peg to be inserted within it while still being able to be inserted into the trailer itself (making it compatible with his G1 trailer and the new trailer included). Like the Encore release, he features lighter colors and tampographed shoulder symbols (which vary slightly from the Encore release).
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades.[113] In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist.[114] Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.[115]
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance.[1] As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.
As a result of striving for vehicle realism and painstaking accuracy to his visual portrayal in the live-action films, this Optimus Prime ends up being ridiculously complex. Transforming him back into a truck is probably more complicated than shown in the movie and can only be considered torture. Very unfortunately, the instructions for this toy are infamous for being amazingly vague and unclear in their visual depiction of the transformation steps, making transformation even harder. Also, let us not forget that, upon transforming him back to robot mode, he will declare his identity over and over and over and over and over until you're finished.
This military-colors redeco of the Auto Roller Dirtbag was planned for late Generation 2 and widely solicited alongside fellow redeco Sargent Hound, but never saw release. Transforming into an "earth mover" dump truck, he has an auto-transforming gimmick activated by rolling his rear wheels; roll forward to go to robot mode, and back to dump truck. A switch on his back end separates the gears of the gimmick, allowing him to roll freely in either mode. In vehicle mode, his missiles can peg onto the front end of the dump-bed for storage. In robot mode, he has a twin spring-loaded missile launcher in his right arm, and a clamping "stun gun" claw on the left.

The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.

Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.


By the ‘90s, the genre had begun to fade, and boys' minds turned to more high-impact action, often centered around mutants, monsters, and karate. Hasbro saw potential in the embers of the Transformers brand, and turned it over to newly-acquired subsidiary Kenner for a jump-start. Kenner threw out all the old rules, and invented a line of Transformers that were more poseable, more feature-packed, and more exciting. Backed by a high-tech CGI cartoon, Beast Wars turned the brand around, making Transformers a bestseller again.

Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).


Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate head sculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime Leader-class-based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.

When Highbrow was captured by the Decepticon leader Scorponok, Optimus Prime agreed to surrender himself to ensure his fellow Autobot's safety. Naturally, though, Prime did not expect Scorponok to hold up his end of the bargain, and he had Hosehead and Fizzle rescue Highbrow while he allowed himself to be imprisoned. Their mission successful, Hosehead and Fizzle then sprang Prime from his cell, and the team beat a hasty retreat. Autobot Hostage
The Hasbro release comes with a pack-in file card. In addition to the regular version, Optimus was also released in a special "advance release" assortment alongside Bulkhead, Megatron and Starscream, with each figure including a mini-DVD that contains the Transformers: Prime episode "Masters & Students". Yes, all four of them come with the same episode.
Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
Bludgeon's recovered files bring Optimus Prime to Earth, where an Autobot detachment led by Prowl has discovered that a Decepticon infiltration unit led by Starscream has broken standard protocol after discovering a new form of Energon. This Ore-13 appears to be the same "Ultra-Energon" that Bludgeon used to revive Thunderwing, who had been dormant for millennia after the apocalypse. Starscream had already used it to fuel a failed attempt to usurp Megatron's leadership, as detailed in the Infiltration miniseries.
The single carded release of Optimus Prime is a redeco of Revenge of the Fallen Legends Class Optimus Prime, exclusive to Walmart in the US and Asda in the UK. Deco changes included in this toy are the top half of the knee armor's blue being omitted and an Autobot insignia tampographed on the left knee, and similar to the Legends Class Power Armor Optimus Prime: the red arms, and the abdomen was replaced into blue.
Summer of 2017 will bring us the fifth Transformers movie, The Last Knight. It’s said that it will be a little different from the previous films; an entry point for new viewers that will help launch a series of spinoffs or stand-alone movies. And the first of those spinoffs is a Bumblebee movie, slated for release in the summer of 2018. At one point, Michael Bay said he would love to make an R-rated, Quentin Tarantino-style movie featuring Bee, but that’s not likely to come to fruition, considering how much kids love the character.
One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.
With the major threats taken care of, Optimus Prime turned his and the Autobots' attention to identifying and shutting down the rogue projects taking place across Earth using stolen Binaltech technology and secrets. It was during one of these missions that Optimus Prime faced off against Nemesis Prime, both in Binaltech Dodge Ram forms. Initially, things looked bad for Optimus Prime, as he was no match for his opponent's spectral armor. However, the Protector merged with Prime, and the enormous power that resulted allowed Prime to reflect Nemesis Prime's final attack, obliterating the evil Decepticon. Optimus Prime recalls the union of the two sparks being familiar, from an event in the distant past. Optimus Prime is reassured by the Protector about "the seeds of the future" and the Protector is revealed to be Optimus Primal.

Leader class figure, this is his form used in the Cybertron television series. Can combine with Leobreaker (or Nemesis Breaker) and/or Cybertron Wing Saber, and can use Metroplex's axe or Vector Prime's sword. At first, Optimus Prime's (Galaxy Convoy in the Japanese version) alt-mode is a futuristic firetruck, although some believe it to be some sort of mobile weapons platform (the show itself treats it as a firetruck). This can also transform into a wing mode, with wings and cannons on each side of the truck. In addition to his standard robot mode, he can combine with his rear 'trailer' section to form a heavily armed super mode. That trailer section can also form an independent weapons platform, usable by anyone. His face, designed in the classic Prime style, merges the two mouth-plate elements - a slitted version to expose his mouth, like Beast Wars Optimus Primal did on the television series and a full mouth-plate which can rise to cover it.[60]
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.
As this is the Unicron Triogy we're talking about, it should come as no surprise that Prime can transform into a Super Mode by combining with his trailer, which becomes a massive winged backpack and a pair of large boots, generally evocative of God Ginrai. To complete his Super Mode look, a small lever of the back of Prime's head raises his traditional mouthplate into place, covering his Optimus Primal-style mouth slot, and two "crests" fold out from either side of his helmet. Hasbro's instructions and stock photography for the figure orient the wings so that the two cannons point over Prime's shoulders, but Takara's have wings arcing up past his shoulders, with the cannons slung under his arms. This was the way Prime appeared in the cartoon series, and was the way all subsequent Hasbro redecos of the toy were positioned. In Super Mode, Prime is a rather top-heavy robot, and his hip joints are not that tight, which makes standing him up a challenging prospect.
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
Both Optimus Prime and Bumblebee raced down a street in an unknown desert while having an argument about Energon. He ordered Bumblebee to scan the surroundings to find the location where the Decepticons were hiding, and to be careful for possible scouts. When Bumblebee noted what the Decepticons were doing, Prime speculated that they might be planning to convert the energy into Energon, and ordered Bumblebee to create a diversion. While Bumblebee and Cyclonus fought, Prime made a surprise attack and took out Cyclonus with his Ion-axe, before turning his attention to Megatron. When both Decepticons fled, Prime told Bumblebee they'd done a good job (in front of a burning Gas station), and both Autobots got back on the move. Fight for Energon
This version of Ultimate Class Beast Hunter Optimus Prime is exclusive to Cybertron Con 2013. While Prime itself is unchanged, he has been packaged in the box with his backpack plugged into his back, allowing the cannons to rotate when his spiky stomach-fenders are pushed down. The box itself also has slightly different text and graphical layouts, is encased in a large, slip-on outer covering, and features a designated number as part of the Thrilling 30 line.
The character of Optimus Prime first appears in the 2007 Transformers film as the leader of the Autobots in the search for the Allspark. He intends to destroy it, even if it means sacrificing himself, before the Decepticons can use it to create a new army to conquer the universe. After arriving and scanning a Peterbilt truck, Optimus greets Sam Witwicky and Mikaela Banes, introducing his men and explaining why they have come to Earth. During the final battle, Optimus slays the hate-filled Decepticon Bonecrusher and faces his ancient enemy, Megatron. Unable to match Megatron in combat, Optimus urges Sam to push the Allspark into his chest, which will destroy them both. Instead, Sam rams the Allspark into Megatron's chest, destroying it and killing the Decepticon leader. The film ends with Optimus sending out a deep-space signal, inviting other Autobots to join them on Earth.
During a Decepticon attack, Cliffjumper pleaded with Optimus to let him jump into the fray. Optimus denied his request, telling him that they already had the Decepticons on the run. In the battle’s aftermath, the Decepticon’s activity seem to vanish altogether. Grateful for the quiet, Optimus decided to head out and fetch extra fuel for the Autobots with Sparkplug. He returned just in time to find his Autobots in the middle of a battle with the Decepticons. With Sparkplug and Prowl’s help, Optimus refuelled his troops, and once more drove the Decepticons back. Revenge of the Decepticons
Part of the fifth wave of Kabaya's revival of the Transformers Gum series, this snap-on transforming model kit of War for Cybertron Optimus Prime is sculpted from red, light blue, and gray plastics, and uses stickers for detail. He comes with a blue non-transforming version of his hand-held blaster rifle, which mounts at the rear in vehicle mode. He comes packed with a model kit of Tigerbreast, and a stick of gum.
Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
One of the taglines of the Transformers universe is “more than meets the eye.” It’s meant to suggest, of course, that these robots are not just robots; they can turn into vehicles and boomboxes and dinosaurs. But some of the characters themselves tend to be more than meets the eye. In fact, they can become other Transformers. Megatron becomes Galvatron, Orion Pax becomes Optimus Prime, and Bumblebee becomes Goldbug.
In addition to being probably the most popular Generation 2 figure, Laser Optimus Prime was, prior to 2003, a regular contender for most popular Transformers toy ever, back in the days of the annual Transformers fan awards, "The Trannies." The toy won twice, and actually lost once to his repaint, Scourge. The launch of the Armada and Alternators line, along with Masterpiece Prime, saw Laser Prime drop down that list distinctly.
For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
Optimus led the search for the AllSpark through space, but he and his troops were unable to locate the artifact. Though the search seemed hopeless, Optimus assured the others that they would not give up until Cybertron's last hope for survival was found... At that moment, a strange green pig crashed through one of the ship's windows, with the AllSpark in tow. Optimus stared in bewilderment at the strange creature as it asked for a ride back home. Hard Boiled
This Optimus Prime is a minor redeco of the One-Step Changer figure, omitting the paint apps on the knees, the flames on his shoulders, and changing the robot mode chest's deco. Along with his wavemate Bumblebee, Optimus Prime loses his pin on his leg, which is used to activate Stomp & Chomp Grimlock's pop-out weapons and gimmicks. As with the first wave of the Turbo Changers, Optimus features a nearly invisible tampograph on his vehicle front, which can be revealed with Mega Turbo Changer Dragonstorm's UV-powered Cyberfire gimmick.
Optimus Prime's Japanese name is "Convoy", which is named after his original name "Battle Convoy" in the Diaclone toyline, because the name "Optimus Prime" is difficult for Japanese kids to remember and pronounce.[2] All Optimus-inspired characters were called variations of Convoy in Japan up until the 2007 Transformers film, at which point TakaraTomy changed their minds and began using the name Optimus Prime as well. Presumably to avoid confusion, this change includes the Generation 1 version of the character as well, who is now called Optimus Prime in newer products and fiction such as Transformers United and Transformers: All Spark, though his name remains Convoy in material aimed at adult collectors such as Alternity and Masterpiece.
In the animated series, Optimus is able to fire short-range optic blasts, project holographic maps, and deploy hydro-foils, designed by Wheeljack, to traverse bodies of water with ease. In the animated series, Optimus was also given the ability to retract his right hand unit and replace it with a glowing axe.[7] Across the assorted continuities of the original Transformers universe, there have been various interpretations of Optimus Prime. One of Prime's most notable characteristics over all continuities his unswaying commitment to leadership by example. The animated series's version of Optimus Prime is depicted as a straightforward, wise, and upbeat battlefield general. Additionally, the animated series's version of Optimus dislikes rap music, putting him at odds with music-loving characters like Blaster and Jazz. In the Marvel Comics series, in addition to these characteristics, Prime is secretly plagued by self-doubt and a conflicted sense of pacifism that often makes him an extremely reluctant warrior.
In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
This Cybertron spin pop consists of a generic handle with an Optimus Prime sticker, topped with a figurine of Prime through which the included lollipop slots. When the handle is squeezed, a manual gear mechanism spins both the figure and lollipop—no batteries necessary! The handle was also redecoed in orange for a Megatron spin pop, with a figure of the Decepticon leader on top.
The most controversial line of this period was the Pretenders. Pretenders consisted of a Transformer contained inside an action figure shell who could "pretend" to be either a human or a monster. Complaints with this line were numerous, including the lack of articulation of the figures (the shells could only move their arms), the simple transformation of the robots within, and their increasing lack of resemblance to any sort of modern recognizable vehicle. Still, despite the complaints, the Pretender line continued through all but the final year of Generation One, with variations such as Beast Pretenders, Monster Pretenders, Classic Pretenders, Mega Pretenders and Ultra Pretenders, each with variations on the theme or increasing levels of complexity.
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge
In light of this news, if Optimus decided to nonetheless head back directly to Autobot headquarters, his squad returned to find their comrades nearly dead from the poison. But with Ratchet’s help, the antidote was quickly distributed, and the Autobots sprung back to life. Now cured, the Autobots discussed their next course of action; they had to prevent the Decepticons from poisoning the nearby water reservoir.
Part of a cross-promotion between Toyota and TakaraTomy, the deluxe-sized FJ Optimus Prime transforms into an FJ Cruiser, with his axe weapon becoming the vehicle's spare tire. The vehicle mode's body panels come packaged on the sprue, and can then be clipped onto the core figure. The mass retail release of FJ Optimus includes yellow and white panels, whilst further color variations were available when purchasing an FJ Cruiser at Japanese Toyota dealerships. As is typical of TakaraTomy exclusives, these variants came in grayscale packaging.

The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.

I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.
The figure was re-released in Hasbro's Asian markets in 2012, with no known changes to the figure itself but several modifications to the packaging that makes it easy to tell the two releases apart: The flap containing the package art is omitted entirely, the "Commemorative Series II" label is missing, the age recommendation and safety warning labels, the "Changes from double tractor trailer to battle station to super robot!" call-out and the name of the toy have all been shuffled around (with the words "battle" and "super" being omitted in the process), and most notably, the toy is no longer named "Powermaster Optimus Prime with Apex Armor", but simply "Optimus Prime", with Apex Bomber's existence no longer acknowledged anywhere on the packaging.

Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
×