Part of the first wave of Siege Voyager Class figures, Optimus Prime transforms from robot to short-smokestacked Cybertronian armored truck and back. He includes two weapons compatible with the C.O.M.B.A.T. System—the "W-50 Dual-Mech Energon Strikeshield", which is an axe that transforms into a shield, and the "W-M3 RF Ion Blaster". Both weapons can combine to form the "Sentrystrike Ultra-Blaster". Optimus Prime also features "battle damage" paint applications on several parts of his body, as well as multiple hardpoints all over himself and his weapons to accommodate "Fire Blasts" from the Battle Masters assortment, which can be used to simulate blaster fire or explosions.
Hot Rod only appeared three more times: once when he gave the Matrix to a Quintesson-controlled Optimus Prime. When he lost the Matrix, Rodimus was forced to face down his fears once and for all when the Decepticons began a series of attacks on Japan. Overwhelmed by the different responsibilities and directions he was being pulled in, Rodimus went joyriding and was attacked by the Stunticons Dead End and Wildrider, losing the Matrix in the ensuing crash, which was acquired by the Scourge, one of Galvatron's minions, the Decepticons' tracker and leader of the Sweeps. While Rodimus became Hot Rod again – and was not eager to change back – Scourge was warped and enhanced by the Matrix and led another attack on Japan. Counseled by a martial arts master on giri – the burden hardest to bear – Rodimus realized that the Matrix was his burden, and that he had been chosen to bear it; battling Scourge, he recovered the Matrix and resumed his role as leader, and finally when Optimus Prime was resurrected, Rodimus Prime was able to return to being Hot Rod for good. In all three occasions, his return to Hot Rod took place because he lost or passed the Matrix to someone else.

I you can get an official reissue for around the same price, do it. I lucked out and got an opened but mint Encore for $50 last week but you'll be getting lucky that way. All Hasbro reissues have short smokestacks and long stacks are harder to get separate to swap out. Average price for a Japanese reissue is around $100 opened. If you are on a budget and the kid doens't care about slight issues, the $40 KO would be the better option.
Optimus Prime was originally known as Orion Pax, a police captain from Rodion. An encounter with a pre-Decepticon Megatron would change the course of his life, teaching him that freedom was not just the right of all "civilised" beings, but of all sentient beings, and causing him to publicly reclaim the name "Autobot", previously used only at Cybertronians as a derogatory term, before the corrupt Senate.
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).
Available in a two pack set with Battle Changer Megatron, this Optimus is largely the same as as the single release, with some minor differences. He uses a new "double harness" piece on his torso instead of using two harnesses, leaving more space for his head to grip the neck-post. He also has different windshield decals, and his reds and blues are slightly darker. And, most obviously, he has an additional buildable trailer, though it doesn't really attach to the truck mode in any meaningful way.
Optimus foiled Megatron's attack on 21st century Tokyo after informing his old foe that wherever he would pop up, the Autobots would be there to thwart his evil intentions. Henkei! Henkei! volume 1 Optimus and Bumblebee later intervened when Astrotrain attacked Shinjuku Station, using their bodies to shield nearby humans from the destruction the triple-changer brought about. They were unaware that Astrotrain's rampage was really a distraction staged to keep their attention away from Megatron's gathering of energon cubes nearby. Henkei! Henkei! volume 2 Optimus continued to do battle against Astrotrain until Rodimus showed up to provide the Autobots with additional firepower. Henkei! Henkei! volume 3
The internet can be blamed for the size and scope of the secondary LEGO market. On the website, BrickLink, you can find almost any set that LEGO has ever produced. In addition, the site keeps records of trends in the market and value of individual pieces. This site is invaluable to a LEGO collector and has given many the ability to grow their collections. Before the advent of this site and sites like eBay, collecting LEGO required going to garage sales. There are now whole sites dedicated to buying LEGO as an investment, but that is a topic for another article.
Sure enough, in 2009, when the Hytherion's colossal claw-marks appeared on planets throughout the solar system, Prime's other-dimensional incarnation returned, bringing with him a "Vibrant Red" Vector 109 auto-avatar with which Prime fused. In that instant, he was reborn as part of the Alternity, a manifold being who encompassed all the different incarnations of Optimus Prime through the multiverse at once. Prime reached his hands heavenward and peeled back the layers of reality, exposing the gargantuan fanged maw of the Hytherion looming above the Autobots. From Here to Alternity
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.

According to an early Universe-style profile published in The Transformers Comics Magazine, Optimus Prime's "official" nicknames were at one point considered to be "Autobot Commander", "Chief", "Big Boss" and "Roller". As far as it is known, no piece of fiction has ever purposely addressed him using these nicknames, though it's a fair bet he's been called "chief" at least once or twice anyway. And technically part of him is called "Roller" with some frequency.
Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
Meanwhile, the U.K. offices of Marvel Comics were producing their own storylines. Writer Simon Furman offered a different take on Prime, that he was weary of the war he had been forced to fight. In the "Prey" storyline, Prime arranged for Wheeljack to build a copy of himself and destroy it to see how the Autobots could cope without him. Unfortunately, the plan was derailed by Megatron and the Predacons. During the battle, Prime, Megatron, and Ultra Magnus were transported to Earth. There, Prime accidentally interrupted his own funeral service. The theme of war-weariness would again come to the fore in the U.K. strips detailing Prime's U.S. death.
Alternatively, if Optimus chose to use the tainted fuel against the Decepticons, he ordered Grapple to carry out the vat outside of headquarters. He then instructed Grapple to lower the vat into a nearby pit, and instructed Jazz to torch the fuel with his flamethrower. He and Jazz waited until the last possible moment to carry out their plan, and once the fuel was lit, they dived to safety inside the Autobot base with the other Autobots. As the toxic cloud successfully turned away the Decepticons, Optimus was surprised to see Sunstreaker once more fully operational. Having been bought enough time, Perceptor was able to successfully cure the poisoned Autobots. Their ranks fully replenished and the Decepticons turning tail meant the Autobots had earned themselves another victory.
Rodimus Prime/Minor is a character who appeared in season 3 of the Transformers Animated series. He is a homage to the Generation 1 version of the character Hot Rod.[17] He wields an energon bow-and-arrow weapon of his own design.[18] On March 31, 2009, Derrick J. Wyatt, lead Transformers Animated Character Designer posted an image of Rodimus' vehicle mode, which is described as a futuristic muscle car that is mostly based on a 2008 Dodge Challenger with some elements of a 1969 Ferrari Daytona. This was revealed at the 2009 BotCon where Hasbro released an action figure of Rodimus Minor. It showed that the 2008 Dodge Challenger parts of Rodimus' vehicle mode were mostly based on the back, top, and sides of the vehicle, while the 1969 Ferrari Daytona parts were found in the front of the vehicle, most notably, the headlights.
Categories: Articles in need of imagesUnreleased toysCharacter stubs missing toysAge of Extinction AutobotsBattle Masters AutobotsBumblebee AutobotsConstruct-Bots AutobotsCostco exclusivesDark of the Moon AutobotsKmart exclusivesMasterpieceMovie AutobotsNESTPlatinum EditionQ-Transformers charactersRevenge of the Fallen AutobotsSam's Club exclusivesStudio SeriesTarget exclusivesThe Last Knight AutobotsTitanium SeriesToys "R" Us exclusivesTransformers (2010) AutobotsTriple ChangersWal-Mart exclusives
Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.
In the United States, Canada, and Hasbro's Asian markets, Masterpiece Movie Series Optimus Prime was exclusively available from Toys"R"Us, whereas in Spain, he saw a wider release, being at least available via the Spanish subsidiaries of Amazon and Carrefour. It's currently unknown if he was also available in stores, or limited to online purchases. In Greece, he was officially available via at least one toy store chain, aptly named simply "Toys-Shop", but again might have been available online only.
 This is an arbitrary line but it is a line that needed to be drawn. There have been many promotional sets over the years which have very few pieces but carry a higher price because of their promotional status. These can range from keychains to individual minifigs to seasonal items. They are not representative of the typical price of a LEGO brick and therefore should not be included in the evaluation.
The two sides found themselves equally matched until the Constructicons merged into The Devastator. The tables were turned once more when the Dinobots appeared, and mercilessly slaughtered the Constructicons. The Decepticons' plan foiled, Optimus decided that the Autobot-Decepticon war had come to an end, despite Megatron's protests to the contrary. He and his Autobots then drove away victorious. Battle for Earth
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial
Came with the Mini-Con Sparkplug. Could combine with Armada Jetfire (and its repaints) and/or Armada Overload (and its repaints). The trailer could convert into a base for Mini-Cons. In Japan a gold chrome edition of this toy was released as a Lucky Draw special. With its trailer the vehicle mode of this toy bears a great resemblance to G1 Star Convoy. According to the Armada video game Armada Optimus Prime is supposed to be 22 feet 10 inches tall (696 cm tall) and the toy is 17.5 cm tall. So that's a scale of 1:40.[55]
Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). The main torso-bot is based on Generation 1 Optimus's original body. Another limb-bot is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?

Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
Excellent article. Especially for pointing out how different we remember things from ‘when we were kids.’ (I swear Optimus Prime was two feet tall!) My only criticism is linking to those two Brickset articles about supposed “quality decline”… the headlines are sensationalist and inflammatory, and a LEGO rep eventually replied to the spurious claims with information that deflates much of the (somewhat unfounded) criticism. Also the comments give me a headache. Otherwise great stuff!

This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.


Part of the first wave of 2012 Generations Deluxe Class toys, Optimus Prime is based on his Fall of Cybertron design, and transforms from a robot to a Cybertronian truck and back. His ion cannon, based on a weapon seen in his concept art, can mount via either of its two 5mm posts onto ports on his hands, forearms, back, and shoulder smokestacks. The toy is known for being oddly small for an Optimus Prime toy, especially when compared to other toys from the same line. This allows him to be more or less in scale with Grimlock and Bruticus (likewise from the same line), however. Optimus features sculpted fake wheels on his back.
The box seems to have been created rather hastily from the Japanese original. It is roughly identical to the Tomy release, but with the Japanese text edited out... mostly. Random Japanese text remains floating in space on the top of the back panel and underneath the "Jetwing Optimus Prime" name on the front. Curiously, the left flap has been rewritten to eliminate mention of NEST and the jetpack's ability to detach, while the right flap has been (badly) edited to remove all mentions of MechTech.
Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.
Available only at KB Toys, Machine Wars Optimus Prime is a redeco and slight retool of the European Generation 1 exclusive Turbomaster leader Thunder Clash, transforming into a Cybertronic truck cab. It's easy to see why Thunder Clash was chosen to become the new Optimus Prime, given his adherence to Prime tradition: the cab disconnects to become the robot, while the trailer unfolds to become an assault tower with twin missile launchers. On the original Thunder Clash version of the mold, the launchers operated on a gravity-feed system that saw a new missile drop into the launcher from above each time one was fired, allowing for twelve to be fired in rapid succession, but for Machine Wars Prime, this feature had to be dialed back for safety reasons. The missiles had to be lengthened to prevent choking hazards, and so the toy's launchers were modified to accommodate them, becoming straightforward spring-loaded single-firing weapons.
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. [20][21]
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
On the day before the Transformers GT began, GT-R Prime found himself racing with GT-R Saber when they were both out for a test run. Though Misaki warned him not to get too invested in a practice race, Prime took the challenge seriously and won the race by briefly transforming into robot mode, thus tricking Saber into slowing down in anticipation of a fight. Test Run Battle! –Prelude– Prime earned the pole position for the Transformers GT, but this combined with his victory over Saber made him overconfident, and he was unprepared when Saber attacked him immediately as the race began and sent him flying. First Fast Attack! –Whoever Strikes First Wins– GT-R Megatron also targeted Prime during the course of the race, seeing him as his fated rival. One Shot and One Kill!! –Finishing Blow–
Metalforce Prime was available in both a matte-paint "anime" version that more precisely echoed the colours of the actual series, and a metallic-paint version (pictured), which is less show-accurate but more shiny. The plain-colours version was the first release and has an Autobot symbol tampograph on his shoulder as per the cartoon, while the later metallic-finish version instead came with a decal sheet.
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)

One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.


The conclusion to the storyline was forestalled when Hasbro retracted 3H Enterprise's license, but an explanation can be found in issue 8 of the Transformers Collectors Club magazine, Cybertron/Robots in Disguise. In this issue, Prime tells the tale of how Unicron's forces were defeated in the last battle by Optimus Primal's forces and Unicron disappeared into the black hole opened in Transformers: Energon. Combined as Omega Prime, they could not escape fast enough, and were sucked into another dimension.
Released as part of the second wave of Clash of the Transformers subline imprint that's exclusive to Toys"R"Us stores, this Power Surge Optimus Prime is a redeco of the toy above, featuring transparent blue parts, white paint applications to the shoulder armor/front truck kibble, his chest, & leg/trailer striping to resemble his larger Power Surge Optimus Prime figure.
Originally, Optimus Prime was created as the leader of the Autobots, though it is unknown how he was created or his origins. In a possible future, Megatron was threatened by the existence of the Aerialbots and had Shockwave build a time machine to send them back in time to get rid of them. However, he only ended up changing history for the better. In the revised timeline, Optimus Prime began his life as a robot named Orion Pax, a mostly defenseless dock worker during the Golden Age of Cybertron nine million years ago, with a girlfriend named Ariel and a best friend named Dion. During this time, a new breed of robot with new flight capabilities appeared on the planet that Orion idolized. When Megatron, the leader of the new group of robots, approached him with inquiries about using one of the dock warehouses, Orion was swayed by Megatron. Both Orion and Ariel were severely wounded when Megatron and his forces attacked in order to claim the energy stored there. Searching for someone to help them, the time-displaced Aerialbots took Orion and Ariel to the ancient Autobot, Alpha Trion, who used them as the first subjects for the new reconstruction process he had developed involving rebuilding the frail Autobot frames into more battle-hardy configurations.
×