The live-action Transformers movie was slated to premiere in the U.S. on July 3, 2007, and was a joint collaboration among DreamWorks SKG, Paramount Pictures and Hasbro, Inc. Paramount Pictures was slated to release the film in the United States, as it had by now made DreamWorks Pictures one of its wholly owned subsidiaries, and was also to be responsible for the international release of the film through United International Pictures, its joint venture with Universal Studios. The feature was directed by Michael Bay from a screenplay written by Alex Kurtzman and Roberto Orci. It was a new story, set apart from the previous incarnations of the cartoon(s) and comic(s). A new origin and characters were introduced. Steven Spielberg, who with Jeffrey Katzenberg and David Geffen had established DreamWorks SKG, was the main executive producer of the film, with Lorenzo di Bonaventura, Tom DeSanto and Don Murphy serving as co-executive producers. In practice, this meant that they were the primary financial sponsors of the film.
Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.
Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball joints. He can also hold small weapons, such as Cyberverse.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
In a completely different scenario, Optimus agreed to Prowl’s plan to go on the offensive and try and discover the full extent of the Decepticons’ plans. Optimus nominated Prowl, Bumblebee and Mirage to go along with him on the mission. The group refuelled with the gas that Sparkplug brought back from the Autobots’ secret storage area, and took off. The group soon happened upon the Decepticons’ lab in the middle of a barren, polluted wasteland.
The box seems to have been created rather hastily from the Japanese original. It is roughly identical to the Tomy release, but with the Japanese text edited out... mostly. Random Japanese text remains floating in space on the top of the back panel and underneath the "Jetwing Optimus Prime" name on the front. Curiously, the left flap has been rewritten to eliminate mention of NEST and the jetpack's ability to detach, while the right flap has been (badly) edited to remove all mentions of MechTech.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
This playset is a variation of Optimus Prime's dinosaur mode, but as a figure-8 racetrack. A launcher can propel Flip Racers through the track where they can activate a popup Chase and land in a jail. The Flip Racer MorBot is included but any Flip Racer is compatible. The raceway can be extended by attaching the Flip Racers launchers: Bumblebee’s Quick Launch Garage or Airport Blastoff Blades (sold separately).
Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
The series begins when Optimus and his crew, after picking up a disillusioned ninja named Prowl, are sent to clear rubble from a space bridge passage. There, the Autobots stumbled upon the Allspark and are immediately attacked by Megatron's battle cruiser, the Nemesis. Through treachery by Megatron's second-in-command, Starscream, Megatron was fragged and the Autobots crashed on Earth in the early 21st century. After being in stasis under Lake Erie for 50 years, the Autobots awaken in Detroit of the near future, where they immediately discovered humans in need and became heroes of the city after stopping a Sumdac Industries experiment gone wrong. During the battle for the possession of the Allspark, Optimus goes offline after defeating Starscream, only to be revived by Sari Sumdac and her Allspark-infused key.
If Powerglide did not heed Optimus orders, he indadvertedly caused the water supply to be poisoned anyways. If however, Powerglide listened to Optimus’s orders, the Autobots attempted to lure the Decepticons away from the reservoir and into some nearby woods, where the Autobots would have some cover against the Decepticons. Finding themselves under heavy fire before they could reach the treeline, the Autobots were forced to fight back in the open. With Autobots falling beside him, Optimus gritted his teeth and took careful aim at the poison containers the Decepticons were carrying. After taking out both of the planes carrying the poison, Optimus continued to battle Megatron and his Decepticons until nightfall, until the Autobots were finally victorious.
The Autobots and the Decepticons came to a distant world in the grip of an ice age. Assuming alternate modes based upon the dominant (though doomed) indigenous creatures of this planet, they continued their ancient, unending war. However, the Autobots, with their energy levels dangerously low, withdrew from combat as the world grew colder. They sought refuge in a deep cavern and entered stasis lock, awaiting the day when surface conditions changed to better suit their operation. Hearts of Steel #1 Optimus lay under the Mare Rurek Glacier. Infestation 2: The Transformers #1 Millions of years later, Bumblebee was awoken by the hammering of humans working on a rail line. He briefly considered awakening Optimus Prime, but thought better of it. After discovering the world had changed significantly, Ratchet thought there was no reason to awaken Prime. Hearts of Steel #1 When Bumblebee discovered the Decepticons were once again active on this world, Ratchet and Prowl agreed that the Autobots must intervene, but again decided out of rousing Optimus from his slumber. Hearts of Steel #2
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.
Optimus pondered Sunstreaker's whereabouts after noticing that he had been absent from Autobot headquarters for longer than expected. The answer came through Blaster, who relayed a message from Megatron; Sunstreaker was the Decepticons' captive. Megatron demanded that the Autobots surrender, or else Sunstreaker would be destroyed and rebuilt as a Decepticon! The Autobots refused to give up without a fight, but Optimus took care to explain the threat they were up against before a rescue party headed out. Optimus told Sideswipe, Slag and Sludge of Devastator's combiner nature, and warned them not take the danger he posed lightly. The rescue squad failed in liberating Sunstreaker, and were captured themselves. The Autobots were shaken by this turn of events, but Optimus was able to think up a new plan to trick the Decepticons. He ordered his Autobots to build a hollow statue of Devastator for him and his soldiers to hide within. Optimus then wrote a letter explaining that the statue was a peace offering for the Decepticons, and the completed decoy was placed before the Decepticons' base. The ruse worked, and Optimus and his troops burst forth from the false Devastator after the Decepticons had let down their guard. An all-out brawl between Autobots and Decepticons followed. The fight came to an end when Megatron attempted to down Optimus with his fusion cannon, only for Optimus to deflect Megatron's beam back at him by bouncing it off a reflective piece of metal. With the Decepticons defeated, Optimus ordered his troops to retrieve their wounded and return to Autobot headquarters. The Autobots' Secret Weapon
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)
Screen Rant is exclusively announcing that the Transformers brand will join the pop culture series of toys with figures from Star Wars and Marvel and you can get your first look below. Hasbro relaunched their Mighty Muggs line in January 2018 with by announcing plans for over 50 figures from Star Wars and Marvel, with each collectible figure including the new push-and-turn head feature that changes their facial expressions. And yes, this new feature applies to your favorite Cybertronians too!
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
The Japanese release of Powermaster Optimus Prime actually represented a new character named Ginrai, and featured several retools: the cab featured die-cast metal, shortened smokestacks, vacuum-metalized plastic and clear blue windows, while the trailer was given retractable super robot fists. This Japanese version was eventually issued by Hasbro in 2003 as part of the Commemorative Series collection (see below).
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
Using their network of human allies, the Autobots tracked the Decepticons to Stanley Lake. When Optimus learned that the Decepticons had taken over the hydro-plant, he lured them out into the valley in front of the dam so that Jazz and the humans could flood the valley, washing the Decepticons away. Menace at the Dam Starscream attempted to defect as part of a ploy to get a spy into the Autobots' midst, but Optimus wasn't fooled at all. He and his men concocted a false plan which they shared with Starscream, and while the Decepticons were subsequently on a wild goose chase, Optimus's team smashed the Decepticon base flat. As they let Starscream go, Optimus couldn't help mocking him. Espionage!!!!!
"Vibrant Red" Alternity Convoy is a redeco of the "Ultimate Silver" figure in the much more traditional red and blue Prime color scheme, representing the Optimus Prime of universal stream Primax 109.0 Beta. The figure was available simultaneously with the Ultimate Silver version, sharing the same packaging and pack-in materials, save for the color of the illustration on the front of the box, and a sticker that identified the figure within.
Animated Optimus Prime, in an Earth-based fire truck mode, appears as a hidden character in the Transformers Netjet video game by Hasbro. Instead of being leader of the Autobots, Prime was actually a washout from the Elite Guard. Despite no longer being a member, he maintains his military ranking of "Prime". The scale chart released for the series indicates Optimus Prime stands about 22 feet tall.
Optimus appeared in the 2008 BotCon voice actor play "Bee in the City", voiced by David Kaye. In this story, Professor Sumdac attempts to create a teleportation system to get the Autobots to Cybertron, but an interaction with Sari's key ends up transporting Optimus Prime, Bumblebee, and Sari to Transtech Cybertron. There, they met Flareup and are detained by Shockwave. Bumblebee teams up with Beast Wars Megatron to free his comrades, but must then stop Megatron from taking the key for himself. Afterward, the Autobots and Sari returned to their own dimension.
Although he was weak and low on energon, Prime made a last-ditch effort to save the day when he rammed through the wall of Megatron's energon-producing lab. G.I. Joe vs. the Transformers #5 After a quick recharge, Optimus single-handedly smashed the Decepticons, pounded Megatron to the ground, and ripped his fusion cannon off his arm. Prime then teamed up with the Joes and used Megatron's cannon to shoot down the SPS Satellite that had gone rogue and was destroying the island.
Generations "Combat Hero Optimus Prime" is a metallic-blue, gunmetal, and red redeco of United Laser Optimus Prime, having the retooled tab, and being based on the canceled Generation 2 Combat Hero Optimus Prime figure, sporting a red mouthplate inspired by the official catalog image for the unreleased toy (packaged samples had featured a traditionally colored gray mouthplate). He comes packed with a (vaguely) Generation 2-styled Deluxe Class Autobot Jazz, as well as unchanged releases of Generations Legends Class Thundercracker and Motorbreath.
Similar to the Activators toyline, One-Step Changer Optimus Prime features a spring-loaded transformation. He features swivel articulation in the head and both arms. He shares a similar (not identical) transformation with his fellow One-Step changer, Hound. Also, due to his transformation scheme, his shoulders can be pushed forward (the arms is pushed on the same time), which also allows him to wield a close ranged weapons with longer handles with both hands.
Laser Optimus Prime transforms into a mid-1990s Western Star 4964EX, pulling a grey and black fuel tank trailer. The sides of the trailer are decorated with a sticker depicting Prime using a flamethrower to burn down a banner with the words "Optimus Prime Octane" on it. The truck is armed with a disc launcher on the roof of its trailer, which launches five blue discs bearing the Generation 2 Autobot insignia as a knob is turned. Like the other "Laser" toys released this year, Prime features electronics powered by two button-cell batteries; in truck mode, pressing the button on the cab's roof causes his headlight to light up with yellow LEDs.
The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation 1 Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, while various other decos have been replaced by copper.
© 2019 Hasbro.com All rights reserved. All audio, visual and textual content on this site (including all names, characters, images, trademarks and logos) are protected by trademark, copyrights and other Intellectual Property rights owned by Hasbro or its subsidiaries, licensors, licensees, suppliers and accounts. By using this site, you agree to the Terms and Conditions of Use.
A gold chrome remold of the 2007 movie Leader Class figure by Hasbro Hong Kong. Limited to 88 units, with only 10 released to the public at the 2008 Animation and Comic Show convention; all of which were sold only to the first 10 people to spend more than HK$3,000 at the Hasbro booth. Because the figure is permanently fixed to the trophy base, it is no longer transformable.
Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and SideSwipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.
Optimus includes an spring-loaded missile firing "ion cannon" modeled after Megatron's shotgun from Dark of the Moon, with the missile features a sculpted shotgun nozzle on the front section. It can be held in his hand or attached to the top of the truck cab or truck bed via 5mm post, and, in an unadvertised feature, sports tabs on the rear-most handle that allow the Dark of the Moon Voyager Class Megatron toy to wield it. Also undocumented is the fact that the weapon can be stored under either of Optimus' shoulders.
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
Transformers: Cybertron, named Galaxy Force in Japan, was a follow-up to the successful Armada and Energon lines. The companion anime series program was not originally conceived or produced as a continuation of the Armada/Energon storyline, and it was only later that it was retconned to be a continuation. Thus, several inconsistencies exist. Once again, a new feature was introduced for the line—Cyber Keys, which activated special functions on the figures in a manner similar to the Mini-Cons in Armada. Each figure came with a Cyber Key regardless of size, but there were several Cyber Keys crucial to the plot of the anime series which only came with certain figures. Again, many of the same characters were included but with entirely new figures from new molds.
The cab transforms into the robot mode of Optimus Prime himself, with the addition of a pair of removable blue fists that plug into his headlights. The fists themselves do not store anywhere in vehicle mode, but can fit easily in Prime's opening chest compartment (originally designed to accommodate two Diaclone driver figures). Prime is armed with a black laser rifle that, due to design, he cannot hold straight.